BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

EARTH WORK
1 Earth work in surface excavation not exceeding 30cm in depth but
exceedign 1.5 m in width as well as 10sqm on plan including disposal
of excavation earth upto 50m and lift upto 1.5m, disposal soil to be
levelled and neatly dressed:

1.1 All kinds of soil 40 sqm 20.74 829.60

2 Earth work in excavation by mechanical means (hydraullic excavator)
manual means over areas (exceeding 30cm in depth. 1.5m in width as
well as 10 sqm on plan) including disposal of excavated earth lead upto
50m and lift upto 1.5m, disposal earth to be levelled and neatly
dressed.

2.1 All kinds of soil 40 cum 101.85 4074.00

3 Earth work in excavation by mechanical means (hydraullic excavator)
manua means over areas (exceeding 30cm in depth. 1.5m in width as
well as 10 sqm on plan) including disposal of excavated earth lead upto
50m and lift upto 1.5m, disposal earth to be levelled and neatly
dressed.

3.1 Ordinary rock 40 cum 152.60 6104.00

3.2 Hard rock ( requiring blasting) 40 cum 252.20 10088.00
3.3 Hard rock ( blasting prohibited) 40 cum 325.25 13010.00
4 Excavation work in foundation trenches or drains not exceedign 1.5 m
in width or 10 sqm on plan including dressing of sides and ramming of
bottoms lift up to1.5m, including getting out the excavated soil and
disposal of surplus excavated soils as directed, within a lead of 50 m.

4.1 Ordinary rock 40 cum 162.65 6506.00

4.2 Hard rock (requiring blasting ) 40 cum 272.95 10918.00
4.3 Hard rock (blasting prohibited) 40 cum 332.45 13298.00
5 filling available excavated earth (excluding rock) in trenches, plinth 40 cum 45.70 1828.00
sides of foundating each deposited layers not exceeding 20cm in depth
consolidating each deposited layer by ramming and watering, lead upto
50m and lift up to 1.5,.

6 Surface dressing of the ground including removing vegetation and in-

equalities not exceeding 15cm deep and disposal of rubbish lead upto
50m and lift upto 1.5m
6.1 All kinds of soil 40 100 sqm 512.10 20484.00
7 Clearing jungle including uproofing of rank vegetation, brush wood 40 100 sqm 263.90 10556.00
trees and sapling of girth upto 30 cm measured at a height of 1m
above ground level and removal of rubbish upto a distance of 50m
outside the periphery of thse area cleared.

8 Clearing grass and removal of the rubbish up to a distance of 50m 40 100 sqm 135.65 5426.00
outside the periphery of the area cleared.
9 Felling trees of the girth ( measured at a height of 1m above ground
level) including cutting of trunks and branches removing the roots and
stacking of serviceable material and disposal of unsserviceable
material.

9.1 Beyond 30cm girth upto and including 60cm girth 40 each 81.70 3268.00
9.2 Beyond 60cm girth upto and including 120cm girth 40 each 359.80 14392.00
9.3 Beyond 120cm girth upto and including 240cm girth 40 each 1658.85 66354.00
9.4 Above 240cm girth 40 each 3330.20 133208.00
10 Diluting and injecting chemical emulsion for POST-
CONSTRUCTIONAL anti termite treatment (excluding the cost of
chemical emulsion)
10.1 Along external wall where the apron is not provided using chemical
emulsion @ 7.5 ltr / sqm of the vertical including excavation channel
along the wall and rodding etc. complete
10.1.1 with chlorpyriphos/ lindane E.C 20% with 1% concentration 40 sqm 6.75 270.00
10.2 Nil
10.3 Along the external wall below concrete or masonry apron using
chemical emulsion @ 2.25 Ltr per linear mtr including drillinng and
plugging holes etc.
10.3.1 with chlorpyriphos/ lindane E.C 20% with 1% concentration 40 sqm 10.45 418.00
10.4 Nil
10.5 treatment of soil under existing floors using chemical emulsion @ one
ltr per hole, 300 mm apart including drilling 12mm diameter holes and
plugging with cement mortar 1:2 (1cement 2 coarse sand) to match the
existing floor

10.5.1 with chlorpyriphos/ lindane E.C 20% with 1% concentration 40 sqm 48.70 1948.00
10.6 Nil
10.7 Treatment of exising masonry using chemical emulsion @ one ltr per
hole at 300 mm interval including drilling holes at 45 degree and
plugging them with cement mortar 1:2(1cement 2 coarse sand ) to the
full depth of the hole

10.7.1 with chlorpyriphos/ lindane E.C 20% with 1% concentration 40 mtr 7.60 304.00
10.8 NIL
10.9 Treatment at points of contact of wood work by chemical emulsion 40 mtr 79.80 3192.00
chlorpyriphos/ Lindane (in oil or kerosene based solution ) @ 0.5 ltr
per hole by drilling 6mm dia holes at downward angle of 45 degree at
150mm centre to centre and sealing the same

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

11 Earth work excavation in slushy soils including removing the sewage 40 One Cum 152.77 6110.80
water and scum from the pit of broken sewer lines,man holes,
chambers etc., to enable building new ones (sewage gangman are to be
engaged if nacessary) etc., complete all as directed by Engineer-in-
charge.(while excavating care should be taken about cables and shall
intimate to Electrical Department/ Telephones Department to take
care of the cables).

CEMENT MORTAR WORKS*

12 Cement mortar 1:1( 1 cement 1 fine sand) 50 cum 414.70 20735.00 Cement / Steel will be issued free of
cost from BHEL Stores
13 Cement mortar 1:2( 1 cement 2 fine sand) 50 cum 504.25 25212.50 Cement / Steel will be issued free of
cost from BHEL Stores
14 Cement mortar 1:3( 1 cement 3 fine sand) 50 cum 549.50 27475.00 Cement / Steel will be issued free of
cost from BHEL Stores
15 Cement mortar 1:4( 1 cement 4 fine sand) 50 cum 549.85 27492.50 Cement / Steel will be issued free of
cost from BHEL Stores
16 Cement mortar 1:5( 1 cement 5 fine sand) 50 cum 550.05 27502.50 Cement / Steel will be issued free of
cost from BHEL Stores
17 Cement mortar 1:6( 1 cement 6 fine sand) 50 cum 550.20 27510.00 Cement / Steel will be issued free of
cost from BHEL Stores
18 Cement mortar 1.2 ( 1 cement 2 coarse sand) 50 cum 770.25 38512.50 Cement / Steel will be issued free of
cost from BHEL Stores
19 Cement mortar 1.3 ( 1 cement 3 coarse sand) 50 cum 849.10 42455.00 Cement / Steel will be issued free of
cost from BHEL Stores
20 Cement mortar 1.4 ( 1 cement 4 coarse sand) 50 cum 849.45 42472.50 Cement / Steel will be issued free of
cost from BHEL Stores
21 Cement mortar 1:5 ( 1 cement 5 coarse sand) 50 cum 849.65 42482.50 Cement / Steel will be issued free of
cost from BHEL Stores
22 Cement mortar 1.6 ( 1 cement 6 coarse sand) 50 cum 849.80 42490.00 Cement / Steel will be issued free of
cost from BHEL Stores
23 Cement mortar 1:2( 1 cement 2 stone dust) 50 cum 865.25 43262.50 Cement / Steel will be issued free of
cost from BHEL Stores
24 Cement mortar 1:2( 1 cement 2 marble dust) 50 cum 960.25 48012.50 Cement / Steel will be issued free of
cost from BHEL Stores
25 Cement mortar 1:5( 1 cement 5marble dust) 50 cum 1063.65 53182.50 Cement / Steel will be issued free of
cost from BHEL Stores
26 White cement mortar 1:2( 1 white cement 2 marble dust) 50 cum 7590.25 379512.50
27 White cement mortar 1:3( 1 white cement 3 marble dust) 50 cum 6035.60 301780.00
28 White cement mortar 1:5( 1 white cement 5 marble dust) 50 cum 4086.15 204307.50
29 Mud mortar 50 cum 156.85 7842.50
CEMENT CONCRETE WORKS
30 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering- All work upto plinth
level
30.1 1:1:2 (1cement 1coarse sand 2 grade stone aggregate 20mm nominal 75 cum 1519.37 113952.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.2 1/2 75 cum 1518.60 113895.00 Cement / Steel will be issued free of
1:1 1/2:3( 1 cement 1 coarse sand :3 graded stone aggregate 20mm
nominal size) cost from BHEL Stores
30.3 1:2:4 (1cement 2:coares sand 4 grade stone aggregate 20mm nominal 75 cum 1568.49 117636.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.4 1:2:4 (1cement 2:coares sand 4 grade stone aggregate 40mm nominal 75 cum 1505.14 112885.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.5 1:3:6 (1cement 3:coares sand 6 grade stone aggregate 20mm nominal 75 cum 1629.89 122241.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.6 1:3:6 (1cement 3:coares sand 6 grade stone aggregate 40mm nominal 75 cum 1551.89 116391.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.7 1:3:6 (1cement 3:coarse sand 6 grade stone aggregate 40mm nominal 75 cum 1399.04 104928.00 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.8 1:4:8 (1cement 4:coares sand 8 grade stone aggregate 40mm nominal 75 cum 1551.74 116380.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.9 1:4:8 (1cement 4:coares sand 8 grade stone aggregate 40mm nominal 75 cum 1398.89 104916.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.1 1:5:10 (1cement 5:coares sand 10 grade stone aggregate 40mm 75 cum 1551.61 116370.75 Cement / Steel will be issued free of
nominal size) cost from BHEL Stores
30.11 1:5:10 (1cement 5:fine sand 10 grade stone aggregate 40mm nominal 75 cum 1393.46 104509.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
30.12 1:2:3,1/2:4:11(1 ordinary portland cement :2Fly ash :3, 1/2 coarse 75 cum 1491.19 111839.25 Cement / Steel will be issued free of
sand :9 graded stone aggregate 40mm nominal size). cost from BHEL Stores
30.13 1:2:3,1/2:4:11(1 ordinary portland cement :2Fly ash :3, 1/2 coarse 75 cum 1468.31 110123.25 Cement / Steel will be issued free of
sand :9 graded stone aggregate 40mm nominal size). cost from BHEL Stores
31 Providing and laying cement concrete in retaining walls return walls (
any thickness) including attached pilasters, columns piers abutments
pillars posts struts buttresses string or lacing courses parapets coping
bed blocks anchor blocks plain window sillis fillets etc. upto floor five
level excluding the cost of centering shuttering and finishing :

31.1 1:1:2 (1cement 1coarse sand 2 grade stone aggregate 20mm nominal 75 cum 1841.02 138076.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
31.2 1/2 75 cum 1840.25 138018.75 Cement / Steel will be issued free of
1:1 1/2:3( 1 cement 1 coarse sand :3 graded stone aggregate 20mm
nominal size) cost from BHEL Stores

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

31.3 1:2:4 (1cement 2:coares sand 4 grade stone aggregate 20mm nominal 75 cum 1890.14 141760.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
31.4 1:2:4 (1cement 2:coares sand 4 grade stone aggregate 40mm nominal 75 cum 1826.79 137009.25 Cement / Steel will be issued free of
size) cost from BHEL Stores
31.5 1:3:6 (1cement 3:coares sand 6 grade stone aggregate 20mm nominal 75 cum 1951.54 146365.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
31.6 1:3:6 (1cement 3:coares sand 6 grade stone aggregate 40mm nominal 75 cum 1873.54 140515.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
31.7 1:3:6 (1cement 3:fine sand 6 grade stone aggregate 40mm nominal 75 cum 1720.69 129051.75 Cement / Steel will be issued free of
size) cost from BHEL Stores
32 Centering and shuttering including strutting propping etc. and
removal of rorm work for :
32.1 Foundations , Footings, bases for columns 50 sqm 119.25 5962.50
32.2 Retaining walls, return walls, walls ( any thickness ) including 50 sqm 180.40 9020.00
attached pilasters , buttresses, plinth and string courses fillets etc.

32.3 Columns piers, abutments, pillars, posts and struts. 50 sqm 238.40 11920.00
33 Providing and fixing upto floor five level precast concrete string or
lacing courses, copings, bed plates, anchor blocks, plain window sills,
shelves, louvers, steps, stair cases, etc. including hoisting and setting
in position with cement mortar 1:3 (1:cement :3 coarse sand ), cost of
required centering, shuttering and finishing smoth with 6mm thick
cement plaster 1:3 (1cement : 3 fine sand )on exposed surgaces
complete.

33.1 1:2:4(1cement :2 coarse sand :4 graded stone aggrigate 20mm nominal 50 cum 2806.61 140330.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
33.2 1:3:6(1cement :3 coarse sand :6 graded stone aggrigate 20mm nominal 50 cum 2868.01 143400.50 Cement / Steel will be issued free of
size) cost from BHEL Stores
34 Providing and fixing at or near ground level precast cement concrete in
kerbs, edgings etc. as per approved pattern and setting in position with
cement mortar 1:3 (1cement 3 coarese sand ) including the cost of
required centering shuttering and finishing smoth with 6 mm thick
cement plaster 1:3 (1 cement :3 fine sand ) on exposed surfaces
complete.

34.1 1:2:4(1cement :2 coarse sand :4 graded stone aggrigate 20mm nominal 50 cum 2202.96 110148.20 Cement / Steel will be issued free of
size) cost from BHEL Stores

REINFORCED CEMENT CONCRETE WORKS

35 Providing and laying in position specified grade of reinforced cement
concrete excluding the cost of centering shuttering finishing and
reinforcement All work up to plinth level
35.1 1:1:2(1cement 1coarse sand 2 grade stone aggrigate 20mm nominal 55 cum 1621.57 89186.35 Cement / Steel will be issued free of
size) cost from BHEL Stores
35.2 1:1.5:3(1cement 1.5 coarse sand 3 grade stone aggrigate 20mm 55 cum 1620.80 89144.00 Cement / Steel will be issued free of
nominal size) cost from BHEL Stores
35.3 1:2:4( 1cement 2 coarse sand 4 grade stone aggrigate 20mm nominal 55 cum 1670.64 91885.20 Cement / Steel will be issued free of
size) cost from BHEL Stores
36 Reinforced cement concrete work in walls (any thickness) including
attached pilasters buttresses plinth and string course fillets columns
pillars piers abutments posts and struts etc. up to floor five level
excluding cost of centering shuttering finishing and reinforcement

36.1 1:1:2(1cement 1coarse sand 2 grade stone aggrigate 20mm nominal 55 cum 1981.92 109005.60 Cement / Steel will be issued free of
size) cost from BHEL Stores
36.2 1:1.5:3(1cement 1.5 coarse sand 3 grade stone aggrigate 20mm 55 cum 1981.15 108963.25 Cement / Steel will be issued free of
nominal size) cost from BHEL Stores
36.3 1:2:4( 1cement 2 coarse sand 4 grade stone aggrigate 20mm nominal 20 cum 2031.04 40620.80 Cement / Steel will be issued free of
size) cost from BHEL Stores
37 Reinforced cement concrete work in beams, suspended floors, roofs 55 cum 1984.89 109168.95 Cement / Steel will be issued free of
having slope upto 15o landings, balconies, shelves, chajjas, intels, cost from BHEL Stores
bands, plain window sills, staircases and spiral strair cases upto floor
five level excluding the cost of centering shuttering finishing and
reinforcement with 1:2:4( 1cement 2 coarse sand 4 grade stone
aggrigate 20mm nominal size)

38 Providing and laying upto floor five level reinforcement cement concrete 55 cum 1813.89 99763.95 Cement / Steel will be issued free of
in kerbs steps and the like excluding the cost of centering shuttering cost from BHEL Stores
finishing and reinforcement with 1:2:4( 1cement 2 coarses sand 4
grade stone aggrigate 20mm nominal size)

39 Centering and shuttering including strutting propping etc. and

removal of form work for :
39.1 Foundations , Footings, bases for columns 20 sqm 119.25 2385.00
39.2 walls (any thickess) including attached pilasters, butteresses plinth 20 sqm 180.40 3608.00
and string courses etc.
39.3 Suspended floors roofs, landing balconies and acceess platform 20 sqm 187.35 3747.00
39.4 Shelves ( cast in situ) 20 sqm 187.35 3747.00
39.5 Lintels, beams, plinth beams, girderss, bressumenrs and cantilevers. 20 sqm 162.65 3253.00

39.6 Columns piers, abutments, pillars, posts and struts. 20 sqm 238.40 4768.00
39.7 Stairs, (excluding landing ) except spiral stairacases 20 sqm 204.00 4080.00
39.8 Spiral staircase ( including landing ) 20 sqm 182.70 3654.00
39.9 Arches, domes, vault up to 6m span 20 sqm 514.70 10294.00

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

39.1 Extra for arches, domes, vault exceeding 6m span 20 sqm 259.60 5192.00
39.11 Chimneys and shafts 20 sqm 180.40 3608.00
39.12 Well steining 20 sqm 147.00 2940.00
39.13 Vertical and horizontal fines individually or forming box louvers band, 20 sqm 285.55 5711.00
facias and eaves boards.
39.14 NIL
39.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, 20 sqm 119.25 2385.00
window sills, string courses, bands, coping bed plates, anchor blocks
and the like
39.16 Edges of slabes and breaks in floors and walls
39.16.1 under 20 cm wide 55 mtr 61.10 3360.50
39.16.2 Above 20 cm wide 55 sqm 278.25 15303.75
39.17 Nil
39.18 Nil
39.19 Conices and mouldings 55 sqm 323.00 17765.00
39.2 Small surfaces such as cantilever ends, brackets and ends of steps, 55 sqm 246.95 13582.25
caps and bases to pilasters and columns and the like.
39.21 Weather shade, chajjas, corbels etc. including edges. 55 sqm 258.60 14223.00
39.22 Suspended floors roofs, landing balconies and acceess platform with 55 sqm 329.80 18139.00
water proof ply 12mm thick
39.23 Lintels beams plinth beams girders bressumers and cantilevers with 55 sqm 319.10 17550.50
water proof ply 12mm thick
40 Providing hoisting and fixing upto floor five level precast reiforced 55 cum 2874.51 158098.05 Cement / Steel will be issued free of
cement concrete work in string coursses bands coping bed plates cost from BHEL Stores
anchor blocks, plain window sills and the like including the cost of
required centering shuttering finishing smooth with 6mm thick cement
plaster 1:3 ( 1cement 3 fine sand ) on exposed surface complete but
excluding cost of stone aggregate 20mm nominal size)

41 Providing hoisting and fixing upto floor five level precast reinforced 55 cum 3401.23 187067.54 Cement / Steel will be issued free of
cement concrete in lintels beams and bressumers includign setting in cost from BHEL Stores
cement mortar 1:3 (1cement 3 coarse sand) cost of required centering
and shuttering and finishing smooth with 6mm thick cement plaster
1:3 (1cement 3 fine sand ) on exposed surfaces but excluding the cost
of reinforcement with 1:2:4( 1 cement 2 coarse sand 4 graded stone
aggrigate with 20mm nominal size)

42 Providing hoisting and fixing upto floor five level precast reiforced 55 cum 4249.01 233695.33 Cement / Steel will be issued free of
cement concrete in vertical and horizontal fines individually or forming cost from BHEL Stores
box louvers setting in cement mortar 1:2 ( 1cement 2 coarse sand)
including the cost of required centering shuttering and finishing
smooth with 6mm thick cement plaster 1:3( 1cement 3 fine sand ) on
exposed surfaces complete but excluding the cost of reiforcement with
1:2:4(1cement 2 coarse sand 4 graded stone aggrigate 20mm nominal
size)

43 Providing precast cement concrete jali 1:2:4( 1cement 2 coarse sand 4

graded stone aggrigate 6mm nominal size) reinforced with 1.6mm dia
mild steel wire including centering and shuttering roughening cleaning
fixing in cement mortar 1:3 (1cement 3 fine sand )etc. complete
excludign plastering of the jambs sills and soffits.

43.1 50mm thick 55 sqm 350.59 19282.67 Cement / Steel will be issued free of
cost from BHEL Stores
43.2 40mm thick 55 sqm 295.39 16246.67 Cement / Steel will be issued free of
cost from BHEL Stores
43.3 25mm thick 55 sqm 268.69 14778.17 Cement / Steel will be issued free of
cost from BHEL Stores

ENCASING ROLLED STEEL SECTION

44 Encasing rolled steel section, in beams and columns with cement 55 cum 3264.44 179544.20 Cement / Steel will be issued free of
concrete 1:2:4( 1cement 2 coarse sand 4 graded stone aggrigate cost from BHEL Stores
12.5mm nominal size) including centering and shuttering complete but
excluding cost of reinforcement.

45 Encasing rolled steel sections in beams and columns with cement 55 cum 1822.29 100225.95 Cement / Steel will be issued free of
concrete 1:2:4( 1cement 2 coarse sand 4 graded stone aggrigate cost from BHEL Stores
12.5mm nominal size) including centering and shuttering complete but
excluding cost of expanded metal and hangers.

46 Reinforcement for RCC work including straightening, cutting bending

placing in position and binding all complete.
46.1 Cold twisted bars 55 kg 5.81 319.66 Cement / Steel will be issued free of
cost from BHEL Stores
46.2 Hot rolled deformed bars 55 kg 5.81 319.66 Cement / Steel will be issued free of
cost from BHEL Stores
47 Extra for rendering smooth the top of suspended floors landings and 55 sqm 25.39 1396.49 Cement / Steel will be issued free of
staircases(treads and risers) with cement mortar 1:2(1cement 2 cost from BHEL Stores
coarses sand) including a floating cost of neat cement and protecting
the surface with a layer of 7.5 cm of earth laid over 15mm of fine sand
in case of suspanded floor and bricks laid in mud mortar in case of
landing and steel includign subsequent removal and cleaning of the
same

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

48 Providing and filling in position blown bitumen in expansion joints. 55 per cm 348.70 19178.50
depth per
cm width
per 100m

49 Providing and filling in position bitumen mix filler of proportion 80 kg 55 per cm 98.68 5427.46 Cement / Steel will be issued free of
of hot bitumen 1kg of cement and 0.25 cubic metre of coarse sand for depth per cost from BHEL Stores
expansion joints. cm width
per 100m

50 Providing and fixing in position 12mm thick bitumen impregnated fibre 55 per cm 334.55 18400.25
board conforming to IS: 1838 including cost of primer sealing depth per
compound in expansion joints cm width
per 100m

51 Providing and laying in position machine batched machine mixed and 55 cum 3983.75 219106.25
machine vibrated design mix cement concrete of specified grade for
reiforced cement concrete work including pumping of concrete to site
of laying but excluding the cost of centering shuttering finishing and
reiforcement. including admixtures in recommended proportions as per
IS 9103 to aceelarate retard setting of concrete improve workability
with out impairing strength and durability as per direction of Engineer -
in Charge. M-25 grade reinforced cement concrete by using 410kg of
cement per cum of concrete. all work up to floor V level with readymix
concrete.

52 Add or deduct for providing richer or leaner mixes respectively at all

floor levels.
52.1 Providing M-30 grade concrete by using 420kg of cement per cum of 55 cum 109.90 6044.50
concrete instead of M-25 grade B.M.C/ R.M.c.
52.2 Providing M-35 grade concrete by using 428kg of cement per cum of 55 cum 217.30 11951.50
concrete instead of M-25 grade B.M.C/R.M.C.
52.3 Providing M-40 grade concrete by using 435kg of cement per cum of 55 cum 256.45 14104.75
concrete instead of M-40 grade B.M.C/R.M.C.

BRICK MASONRY
53 Brick work with FPS bricks of class designation 75 in foundation and
plinth in:
53.1 cement mortar 1:4( 1cement :4 coarse sand) 20 cum 1791.99 35839.80 Cement / Steel will be issued free of
cost from BHEL Stores
53.2 cement mortar 1:6( 1cement :6 coarse sand) 20 cum 1791.88 35837.50 Cement / Steel will be issued free of
cost from BHEL Stores
53.3 Brick work with modular bricks of class designation 75 in foundation
and plinth in
53.3.1 cement mortar 1:4( 1cement :4 coarse sand) 55 cum 1698.84 93436.20 Cement / Steel will be issued free of
cost from BHEL Stores
53.3.2 cement mortar 1:6( 1cement :6 coarse sand) 55 cum 1719.33 94562.88 Cement / Steel will be issued free of
cost from BHEL Stores
54 Brick work FPS brick of class designation 75 in superstructure above
plinth level up to floor V level in all shapes and sizes in
54.1 cement mortar 1:4( 1cement :4 coarse sand) 55 cum 2100.49 115526.95 Cement / Steel will be issued free of
cost from BHEL Stores
54.2 cement mortar 1:6( 1cement :6 coarse sand) 55 cum 2100.38 115520.63 Cement / Steel will be issued free of
cost from BHEL Stores
55 Half brick masonry with FPS brick of class designation 75 in
foundation and plinth in.
55.1 cement mortar 1:3( 1cement :3 coarse sand) 55 sqm 214.23 11782.66 Cement / Steel will be issued free of
cost from BHEL Stores
55.2 cement mortar 1:4( 1cement :4 coarse sand) 55 sqm 214.19 11780.56 Cement / Steel will be issued free of
cost from BHEL Stores
56 Half brick masonry with FPS brick of class designation 75 in
superstructure above plinth level upto floor V level.
56.1 cement mortar 1:3( 1cement :3 coarse sand) 55 sqm 246.63 13564.66 Cement / Steel will be issued free of
cost from BHEL Stores
56.2 cement mortar 1:4( 1cement :4 coarse sand) 55 sqm 246.64 13565.31 Cement / Steel will be issued free of
cost from BHEL Stores

STONE MASONRY
57 Random rubble masonry with hard stone in foundation and plinth
including leveling up with cement concrete 1:6:12( 1cement 6 coarse
sand 12 grade stone aggrigate 20mm nominal size) at plinth level with

57.1 cement mortar 1:6( 1cement :6 coarse sand) 55 cum 1403.47 77190.58 Cement / Steel will be issued free of
cost from BHEL Stores
58 Coursed rubble masonry (second sort) with hard stone in foundation
and plinth with
58.1 cement mortar 1:6(1cement 6 coarses sand) 55 cum 1517.25 83448.75 Cement / Steel will be issued free of
cost from BHEL Stores

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

59 Stone work ( machine cut edges ) for wall linign upto 10m height
etc.(veneer work) backing filled with a grout of 12mm thick cement
mortar 1:3( 1cement 3 coarse sand ) and jointed with cement mortar
1:2( 1cement 2 stone dust) including rubbing and polishing complete(
to be secured to the backing by means of cramps which shall be paid
for separately)

59.1 Kota stone slabs exposed face dressed and rubbed

59.1.1 25mm thick 55 sqm 652.41 35882.50 Cement / Steel will be issued free of
cost from BHEL Stores
60 Stone tile work for wall lining upto 10m height with special adhesive
over 12mm thick bed of cement mortar 1:3( 1 white cement 2 coarse
sand ) including pointing in white cement with an admixture of
pigment to match the stone shade

60.1 8mm thick (mirror polishsed and machine cut edge)

60.1.1 Granite stone of any colour and shade, white cement in contractor 55 sqm 988.65 54375.62 Cement / Steel will be issued free of
scope cost from BHEL Stores
60.1.2 Raj nagar plain white marble udaipur green marble / Zebra black 55 sqm 839.85 46191.62 Cement / Steel will be issued free of
marble,white cement in contractor scope. cost from BHEL Stores

WOOD/ PVC WORKS

61 Providing wood work in frames of doors windows, clerestory windows
and other frames, wrought framed and fixed in position
61.1 Second class teak wood 50 cum 52090.00 2604500.00
61.2 Sal wood 50 cum 30511.95 1525597.50
61.3 Kiln seasoned and chemically treated Hollock wood 50 cum 31339.45 1566972.50
61.4 Fixing well seasoned medium Indian teak wood work in frames of doors / 50 Cum 6386 319300.00
Windows / clearstory windows and other frames, wrought framed and fixed in
position etc complete all as directed by Engineer-in-charge. (This includes
dismantling the existing frames, brick work, PCC,application of primer etc and
making good to a neat finish etc complete including disposal of debries, at 2
KM lead.)
62 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows including ISI maked black enamelled
M.S butt hinges with necessary screws excluding panelling which will
be paid for separately.

62.1 Second class teak wood

62.1.1 35mm thick shutters 34 sqm 1373.65 46704.10
62.1.2 30mm thick shutters 34 sqm 1219.10 41449.40
62.2 Kiln seasoned and chemically treated Hollock wood
62.2.1 35mm thick shutters 34 sqm 899.70 30589.80
62.2.2 30mm thick shutters 34 sqm 810.90 27570.60
63 Providing and fixing 35mm thick factory made laminated veneer
lumber door shutter confoming to IS 14616 and TDS 15:2001(part B)
including ISI marked black enameled M.S butt hinges with necessary
screws as per directions of engineer in charge and panelling with
panels of

63.1 12mm thick plain grade-1, medium density flat pressed three layer 34 sqm 1877.20 63824.80
particle board FPT-1 or grade wood particle board FPT-1 IS :3087
marked bonded with BWP type synthetic resin adhesive as per IS :848

63.2 12mm thick pre laminated particle board ( decorative lamination on 34 sqm 2014.25 68484.50
both sides) grade- 1, medium density flat pressed three layer particle
board FPT-1 or graded wood particle boarde FPT-1, conforming to IS
3087 bonded with BWP type synthetic resin adhesive as per IS 848
and prelaminated conforming to IS 12823 grade 1, type -II marked

63.3 12mm thick one side pre- laminated particle board (decorative 34 sqm 1960.80 66667.20
lamination on one side and other sides balancing lamination) grade-1
medium density flat pressed three layer particle board PFT-1 or graded
wood particle board FPT-1 conforming to IS 3087 bonded with BWP
type synthetic resin adhesive as per IS 848 and pre- laminated
confornming to IS 12823 grade -1, type II marked

64 Providing and fixing panelling or panelling and glezing in panelled or

panelled and glazed shutters for doors windows and clerestory
windows (Area of opening for panel inserts excluding portion inside
grooves or rebates to be measured) panelling for panelled or panelled
and glazed shutters 25mm to 40mm thick

64.1 Second class teak wood 34 sqm 1075.60 36570.40

64.2 Kiln seasoned and chemically treated Hollock wood 34 sqm 711.25 24182.50
64.3 Ply wood 5 ply,9mm thick
64.3.1 Decorative plywood both side decorative veneer (Type-1) conforming to 34 sqm 1121.60 38134.40
IS 1328 BWR type
64.3.2 Decorative plywood one side decorative veneer (Type-1) conforming to 34 sqm 923.30 31392.20
IS 1328 BWR type
64.4 Nil
64.5 Nil
64.6 Ply wood 7 ply,9mm thick
64.6.1 Decorative plywood one side decorative veneer (Type-1) conforming to 34 sqm 971.85 33042.90
IS 1328 BWR type
64.7 Nil
64.8 Particle board 12mm thick

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

64.8.1 Plain particle board flat pressed, 3 layer or grade wood particle board 34 sqm 518.35 17623.90
medium density grade I, IS: 3087 marked
64.8.2 Veneered flat pressed three layer or graded wood particle board with 34 sqm 740.20 25166.80
commercial veneering on both sides conforming to IS 3097, grade I.

64.8.3 Pre-lamination particle board with decorative lamination on one side 34 sqm 985.70 33513.80
and balancing lamination on other side, grade I, type II IS 12823
marked.
64.8.4 Pre-lamination particle board with decorative lamination on both side 34 sqm 1027.30 34928.20
and balancing lamination on other side, grade I, type II IS 12823
marked.
65 Providing and fixing panelling or panelling and glezing in panelled or
panelled and glazed shutters for doors windows and clerestory
windows (Area of opening for panel inserts excluding portion inside
grooves or rebates to be measured) panelling for panelled or panelled
and glazed shutters 25mm to 40mm thick. coir veneer board(
conforming to IS 14842-2000)

65.1 12 mm thick 34 sqm 920.50 31297.00

66 Providing and fixing glazed shutters for doors windows and clerestory
windows using 4mm thick float glass panes including black enamelled
ISI marked MS butt hinges with necessary screws.

66.1 Second class teak wood

66.1.1 35mm thick 34 sqm 1718.30 58422.20
66.1.2 30mm thick 34 sqm 1541.65 52416.10
66.2 Nil
66.3 Nil
66.4 Klin seasoned and chemically treated Hollock wood
66.4.1 35mm thick 34 sqm 1178.60 40072.40
66.4.2 30mm thick 34 sqm 1077.05 36619.70
67 Providing and fixing factory made lamination veneer lumber glazed
shutter conforming to IS14616 and TADS 15:2001( part B) using 4mm
thick float glass panes for doors windows and clerestory windows
including ISI marked black enamelled MS butt hinges with necessary
screws as per directions of Engineer in charge

67.1 30mm thick shutters 34 sqm 1633.25 55530.50

68 Extra for providing heavy sheet float glass panes instead of ordinary
float glass in glazed doors windows and clerestory window
shutters(area of opening for glass panes excluding portion inside
rebate shall be measured)

68.1 5.5mm thick instead of 4mm thick 34 sqm 106.85 3632.90

69 Extra for providing frosted glass panes 4mm thick instead of ordinary 34 sqm 10.45 355.30
float glass panes 4mm thick in doors windows and clerestory window
shutters( area of opening for glass panes excluding portion inside
rebate shall be measured)

70 Providing and fixing 25mm thick shutters for cup board etc.
70.1 Panelled or Panelled and glazed shutters
70.1.1 Second class teak wood including ISI marked anodised aluminium butt 34 sqm 1360.90 46270.60
hings with necessary screws
70.2 Nil
70.3 Glazed shutters
70.3.1 Second class teak wood including ISI marked anodised aluminium butt 34 sqm 1393.75 47387.50
hings with necessary screws
71 Providing and fixing pre-laminated flat pressed 3 layer (medium
density) particle board or grded wood particle board IS 3087 marked
with one side decorative and other side balancing lamination grade I,
type II exterior grade IS 12823 marked in shelves with screws and
fitting wherever required edges to be painted with polyurethane prime
fitting to be separately)

71.1 18mm thick 34 sqm 935.95 31822.30

71.2 25mm thick 34 sqm 1009.70 34329.80
72 Providing and fixing 25mm thick shutters for cup board etc. including
ISI marked black enamelled MS butt hinges with necessary screws:

72.1 Panelled or Panelled and glazed shutters

72.1.1 Second class teak wood 34 sqm 1312.95 44640.30
72.2 Nil
72.3 Glazed shutters
72.3.1 Second class teak wood 34 sqm 1387.10 47161.40
73 Providing and fixing ISI marked flush door shutters conforming to IS
2202 (part I) decorative type core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross band and face veneers on both faces of
shutters

73.1 35mm thick including ISI marked stainless steel butt hinges with 34 sqm 1473.50 50099.00
necessary screws
73.2 30mm thick including ISI marked stainless steel butt hinges with 34 sqm 1415.45 48125.30
necessary screws
73.3 25mm thick (for cupboard) including ISI marked nickel plated bright 34 sqm 1317.65 44800.10
finished MS piano hinges IS 3818 marked with necessary screws

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

74 Providing 50x50x50mm 2nd class teak wood plug including cutting 34 each 10.10 343.31 Cement / Steel will be issued free of
brick work and fixing in cement mortar 1:3(1cement 3 fine sand) and cost from BHEL Stores
making good the walls etc.
75 Providing and fixing expandable fasteners of specified size with
necessary plastic sleeves and galvanised MS screws including drilling
holes in masonry work/CC/RCC and making good etc, complete

75.1 25mm long 34 each 9.40 319.60

75.2 32mm long 34 each 11.15 379.10
75.3 40mm long 34 each 13.45 457.30
75.4 50mm long 34 each 15.80 537.20
76 Providing and fixing 2nd class teak wood plain lining tongued and
grooved on and including wooden plugs complete with necessary
screws and priming coat on unexposed surface.
76.1 40mm thick 34 sqm 2608.01 88672.33 Cement / Steel will be issued free of
cost from BHEL Stores
76.2 25mm thick 34 sqm 1683.11 57225.73 Cement / Steel will be issued free of
cost from BHEL Stores
76.3 20mm thick 34 sqm 1360.66 46262.43 Cement / Steel will be issued free of
cost from BHEL Stores
76.4 12mm thick 34 sqm 867.41 29491.93 Cement / Steel will be issued free of
cost from BHEL Stores
77 Providing and fixing MS grills of required pattern in frames of windows
etc. with MS flats, square or round bars etc. all complete

77.1 Fixed to steel windows by welding 34 kg 59.25 2014.50

77.2 Fixed to opening / wooden frames with rawl plugs screws etc 34 kg 64.40 2189.60
78 Providing and fixing ISI marked MS pressed butt hinges bright
finished with necessary screws etc. complete
78.1 125x65x2.12mm 34 each 16.80 571.20
78.2 100x58x1.90mm 34 each 13.10 445.40
78.3 75x60x3.10mm 34 each 9.55 324.70
78.4 50x37x1.50mm 34 each 5.35 181.90
79 Providing and fixing IS 1341 marked MS heavy weight butt hinges with
necessary screws etc. complete
79.1 125x90x4.00mm 34 each 37.50 1275.00
79.2 100x75x3.50mm 34 each 22.25 756.50
79.3 75x60x3.10mm 34 each 13.40 455.60
79.4 50x40x2.50mm 34 each 8.15 277.10
80 Providing and fixing partiton upto ceiling height consisting of G.I frame
and required board including providing and fixing of frame work made
of special section power / roll form G.I sheet with Zinc coating of grade
175 in consisting of floor and ceilling channel 50mm wide having equal
flanges of 32mm and .5mm thick fixed to the floor and ceiling at the
spacing of 610mm centre to centre with dash fastener of 12.5mm dia
meter 40mm length and the studs 48mm wide having one flange of
43mm and other flanges 36mm and 0.50mm thick fixed vertically
within flanges of floor adn ceiling channel and placed at a spacing of
610mm centre to centre by 6mm dia bolts and nuts at both ends of
partition fixed flush to wall with rawl plugs at spacing of 450mm
centre to centre and fixing of boards to either side of frame work by
20mm long drive wall screws on studs floor and ceiling channels at the
spacing of 300mm centre to centre including jointing and finishing to a
flush with recommended jointing compound jointing tape joint finisher
and two coats of primer suitable for board as per manufacture
specification all complete.

80.1 67mm overall thickness partition with 8.5mm thick double skin glass 34 sqm 813.80 27669.20
reiforced Gypsum (GRG) board conforming to IS 2095 part III

80.2 75mm overall thickness partition with 12.5mm thick double skin plain 34 sqm 674.45 22931.30
Gypsum board conforming to IS 2095 part I
80.3 66mm overall thickness partition with 8mm thick double skin calcium 34 sqm 823.10 27985.40
silicate board made with calcareous and siliceous materials reiforced
with cellulous fiber manufactured through autoclaving process with
compressive strength 225kg/sqcm bending strength 100kg / sq.cm

80.4 66mm overall thickness partition using 8mm thick double skin non- 34 sqm 927.65 31540.10
asbestos multipurpose cement board reiforced with cellulose fibre
manufactured through autoclaving process (high pressure steam cured
) as per IS 14862 with suitable fibre cement screws

81 Providing and fixing factory made UPVC door frame made of UPVC
extruded section having an overall dimensions as below (tolerance -
+
1mm ) with wall thickness 2.0mm -+ 0.2mm, corners of the door
frame to be mitred and welded of pastic, galvanized brackets and
stainless steel screws . the hinges side vertical of the frames reiforced
by galvanized stainless steel hinges fixed to the frame complete as per
manufactures specification and direction of engineer in charge

81.1 Extruded section profile size 48x40mm 34 mtr 141.00 4794.00

81.2 Extruded Section Profile size 42x50mm 34 mtr 146.80 4991.20
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

81.3 Providing and fixing to existing door frames

81.3.1 24mm thick factory made PVC door shutters mede of styles and rails of 34 sqm 2190.50 74477.00
a UPVC hollow section of size 59x24mm and wall thickness 2mm -+
0.2mm with inbuilt edging on both sides. The styles and rails mitred
and joined at the corners by means of MS galvanised / plastic brackets
of size 75x220 mm having wall thicknell 1.0mm and stainless steel
screws. the styles of the shutter reiforced by inserting galvanised MS
tube of size 20x20mm and 1mm -+ 0.1mm wall thickness. the lock rail
made up of H section a UPVC hollow section of size 100x24 mm and 2
mm -+ 0.2mm wall thickness fixed to the shutter styles by means of
plastic/ galvanised MS.U cleats. the shutter frame filled with a UPVC
multi chambered single panel of size not less than 620 mm having over
all thickness of 20mm and 1mm -+ 0.1mm wall thickness. the panels
filled vertically and tie bar at two places by inserting horizontally 6mm
galvanised MS rod and fastened with nuts and washers, complete as
per manufacture's specification and washers complete as per
manufacture's specification and direction of engineer in charge. (for
W.C and bathroom door shutter)

81.3.2 30mm thick factory made polyvinyl chloride (PVC) door shutter made 34 sqm 2271.80 77241.20
of styles and rails of a UPVC hollow section of size 60x30mm and wall
thickness 2mm -+ 0.2mm with inbuilt decorative moulding edging on
one side. The styles and rails mitred and joined at the corners by
means of MS galvanised/ plastic brackets of size 75x220mm having
wall thickness 1.0mm and stainless steel screws. the styles of the
shutter reinforced by inserting galvanised MS tube of size 25x20mm
and 1mm -+ 0.1mm wall thickness.the lock rail made up of H section a
UPVC hollow section of size 100x30mm and 2mm -+ 0.2mm wall
thickness fixed to the shutter styles by means of plastic galvanised MS
U cleats. the shutter styles by means of plastic / galvanised MS U
cleats. the shutter frame filled with a UPVC multi chambered single
panel of size not less than 620mm having over all thickness of 20mm
and 1mm -+ 0.1mm wall thickness. the panels filled vertically and tie
bar at two places by inserting horizontally 6mm galvanised MS rod and
fastened with nuts and washers, complete as per manufacture's
specification and dircetion of engineer in charge

81.3.3 25mm thick PVC flush door shutters made out of a one piece multi 34 sqm 2358.90 80202.60
chamber extruded PVC section of the size of 762 mm x 25mm or less
as per requirment with an average wall thickness of 1mm -+ 0.3mm.
PVC foam end cap of size 23x10mm are provided on both vertical edges
to ensure the overall thickness of 25mm. an MS tube having
dimensions 19mmx19mm is inserted along the hinges side of the door.
core of the door shutter shuold be filled with high density polyrenthane
foam. the top and bottom edges of the shutter are covered with an end
cap of the size 25mm x 11mm. door shutter shall be reiforced with
special polymeric reinforcements as per manufacture specification and
direction of Engineer in charges to take up necessary hardware and
fixtures. stickers indicating the locations of hardware will be pasted at
appropriate places

82 Providing and fixing factory made P.V.C. door frame of size 34 mtr 353.10 12005.40
50x47mmwith a wall thickness of 5mm, made out of extruded 5mm
rigid PVC foamsheet mitred at corners and joined with 2 Nos. of
150mm long brackets of15x15mm M.S. square tube, the vertical door
profiles to be reinforced with19x19mm M.S. square tube of 19 gauge,
EPDM rubber gasket weatherseal to be provided through out the
frame. The door frame to be fixed tothe wall using M.S. screws of
65/100mm size complete as permanufacturers specification and
direction of Engineer-in-Charge.

83 Providing and fixing to existing door frames

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

83.1 30mm thick factory made panel PVC door shutter consistingof frame 34 sqm 2109.95 71738.30
made out of M.S. tubes of 19 gauge thickness andsize of 19mm x
19mm for styles and 15x15mm for top &bottom rails. M.S. frame shall
have a coat of steel primers ofapproved make and manufacture . M.S.
frame covered with5mm thick heat moulded PVC 'C' channel of size
30mmthickness, 70mm width out of which 50mm shall be flat
and20mm shall be tapered in 45degree angle on either sideforming
styles; and 5mm thick, 95mm wide PVC sheet out ofwhich 75mm shall
be flat and 20mm shall be tapered in 45degree on the inner side to
form top and bottom rail and115mm wide PVC sheet out of which
75mm shall be flat and20mm shall be tapered on both sides to form
lock rail. Top,bottom and lock rails shall be provided either side of
thepanel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheetbe
provided as gap insert for top rail & bottom rail. panelingof 5mm thick
both side PVC sheet to be fitted in the M.S.frame welded/ sealed to the
styles & rails with 7mm(5mm+2mm) thick x 15mm wide PVC sheet
beading on innerside, and joined together with solvent cement
adhesive. Anadditional 5mm thick PVC strip of 20mm width is to be
stuckon the interior side of the 'C' Channel using PVC solventadhesive
etc. complete as per direction of Engineer-in-charge. Manufacturer’s
specification & drawing (for W.C. andbathroom door shutter).

83.2 30mm thick factory made solid both side Pre-laminated panelPVC door 34 sqm 2580.35 87731.90
shutter consisting of frame made out of M.S. tubesof 19 gauge
thickness and size of 19mm x 19mm for stylesand 15x15mm for top &
bottom rails. M.S. frame shall have acoat of steel primers of approved
make and manufacture .M.S. frame covered with 5mm thick heat
moulded Pre-laminated PVC 'C' channel of size 30mm thickness,
70mmwidth out of which 50mm shall be flat and 20mm shall
betapered in 45degree angle on either side forming styles; and5mm
thick, 95mm wide PVC sheet out of which 75mm shallbe flat and
20mm shall be tapered in 45 degree on the innerside to form top and
bottom rail and 115mm wide PVC sheetout of which 75mm shall be
flat and 20mm shall be taperedon both sides to form lock rail. Top,
bottom and lock railsshall be provided either side of the panel. 10mm
(5mm x 2 )thick, 20mm wide cross PVC sheet be provided as gap
insertfor top rail & bottom rail. paneling of 5mm thick both sidePre-
laminated PVC sheet to be fitted in the M.S. framewelded/ sealed to
the styles & rails with 7mm (5mm+2mm)thick x 15mm wide PVC sheet
beading on inner side, andjoined together with solvent cement
adhesive. An additional5mm thick PVC strip of 20mm width is to be
stuck on theinterior side of the 'C' Channel using PVC solvent
adhesiveetc. complete as per direction of Engineer-in-charge

84 Supplying and fixing of medium Indian teakwood window shutters 34 One Sqm 1848.00 62832.00
30 mm thick fully glazed with 3 mm thick glass of approved quality
including cost and fixing of MS fixtures, fittings and furniture of
superior quality etc., complete as directed by the Engineer-in-charge.

85 Supplying and fixing of medium Indian teak wood window shutters 34 One Sqm 1769.00 60146.00
30 mm thick fully panelled including fixing of M.S. fixtures, fittings
and furniture of superior quality etc., complete as directed by the
Engineer-in-charge.

86 Supplying and fixing of medium Indian teak wood window shutters 34 One Sqm 1628.00 55352.00
30 mm thick partly panelled and partly glazed with 3 mm thick glass
of approved quality including cost and fixing of MS fixtures, fittings
and furniture of superior quality etc., complete as directed by the
Engineer-in-charge.

87 Supply and fixing well seasoned medium Indian teak wood window / 34 One Sqm 1650.00 56100.00
ventilator frames made out of scantling of size 75x75 mm
including fixing of M.S hold fasts 16 mm dia MS rounds spaced at not
more than 10.5cm centre to centre, cost of all materials etc., complete
as directed by the Engineer-in-charge. (This includes dismantling the
existing frames, brick work, P.C.C etc., and making good to a neat
finish etc., complete wherever necessary).

88 Supply and fixing well seasoned medium Indian teak wood ventilator 34 One Sqm 1650.00 56100.00
shutter 30 mm thick fully glazed top/side hung type, glazing with
3mm thick glass of approved quality.
89 Supplying and fixing weldmesh door partly panelled and partly 34 One Sqm 1628.00 55352.00
weldmesh double leaf shutters 30 mm thick using medium Indian
teakwood and weldmesh of size 75x25 mm, 10x8 guage including
supplying and fixing of M.S. fixtures, fittings and furniture of superior
quality etc., complete as directed by the Engineer-in-charge.

90 Supply and fixing weldmesh door double leaf shutter 30 mm thick 34 One Sqm 1463.00 49742.00
using best Indian teakwood and weldmesh of size 75 x 25mm, 10 x
8 guage including supplying and fixing of MS fixtures, fittings and
furniture of superior quality etc., complete as directed by Engineer-in-
charge.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

91 Supplying and fixing of weldmesh of size 75x25mm, 10x8 guage 34 One Sqm 750.00 25500.00
with 75 x 25 mm seasoned medium Indian teakwood reapers to the
existing windows including 2 coats of painting with synthetic enamel
paint of approved shade and brand over a coat of primer, making holes
wherever necessary for operating the fixtures, furniture, cost of all
materials etc., complete.

92 Supplying and fixing of M.S flymesh of an approved quality to the 34 One Sqm 370.00 12580.00
existing door and window shutters with necessary wooden beeding
wherever necessary, including removing the existing flymesh, cost of
all materials etc., complete.

93 Supplying and fixing of medium Indian teak wood door shutters 30 50 One Sqm 1897.00 94850.00
mm thick partly panelled and partly flymesh of approved quality
including cost and fixing of M.S. fixtures, fittings and furniture of
superior quality etc., complete.

94 Supplying and fixing of medium Indian teak wood door shutters 30 50 One Sqm 1638.00 81900.00
mm thick with fully flymesh of approved quality including cost and
fixing of M.S. fixtures, fittings and furniture of superior quality etc.,
complete.

95 Supplying and fixing of best approved quality aluminium sheeting 24 50 One Sqm 218.00 10900.00
guage to the faces and edge of door shutters including fixing with best
quality GI screws and cup washers, cost of all materials etc., complete
as directed by the Engineer-in-charge. (The measurement shall be
made for both sides of door only).

96 Supplying of medium Indian teak wood planks of 19 mm thick in 50 One Sqm 1371.00 68550.00
various sizes as directed upto a length of 2.40 M.
97 Supplying and fixing of seasoned medium Indian teakwood reapers of 50 One Rmt 58.50 2925.00
size 50 x 25 mm horizontally on the wall surface by providing wooden
pegs and fixing with MS screws etc., complete.
98 Supplying and fixing in position medium Indian teakwood cupboard 50 One Sqm 1074.86 53743.00
shutters having frame of size 75 x 25 mm scantling and fixing 3 mm
thick plywood sheets on both sides including cost of MS hinges, Nickle
coated latches and oxidised aluminium fixtures and furniture of
approved quality etc., complete as directed by the Engineer-in-charge.

99 Supply and fxing commercial Plywood sheets 4 mm thick plain 50 One Sqm 341.00 17050.00
lining with necessary screws, priming coat on exposed surface etc
complete all as directed by Engineer-in-charge.
100 Repairs to the existing doors, windows, ventilators and cup boards 50 One Sqm 144.20 7210.00
including frame, shutters, fittings, weldmesh, T.W beadings etc., all as
directed by the Engineer-in-charge. (Only labour charges).

101 Conveying from the stores of wooden / PVC - single / double leaf door 50 One Sqm 129.60 6480.00 Shutters will be issued free of cost
shutters and fixing in position at places as directed with out fittings from BHEL Stores
etc (Labour charges only)
102 Supplying and fixing laminated sheet of thickness not less than 1 mm 50 One Sqm 288.00 14400.00
of required design, brand, quality and size all as directed by the
Engineer-in-charge.
103 Supplying and fixing M.S aldrop powder coated of 16 mm dia 300 mm 50 Each 191.00 9550.00
long heavy type with plate folded hooks required nuts and bolts as
directed by the Engineer-in-charge.
104 Supplying and fixing M.S aldrop powder coated of 12 mm dia 200 mm 50 Each 59.00 2950.00
long heavy type with required nuts and bolts as directed by the
Engineer-in-charge.
105 Supplying and fixing of PVC netlon mesh of approved colour to the 50 One Sqm 240.00 12000.00
existing window mesh shutters with male and female posting
arragements and removing of existing old flymesh etc. complete as
directed by the Engineer-in-charge.

106 Supply and fixing of 100 mm vertical blinds including imported spare 50 One Sqm 1176.00 58800.00
parts and Indian fabric including cost of materials, fixtures and fittings
etc., complete as directed by the Engineer-in-charge.

STEEL WORK*
107 Structural steel work in single section fixed with or without connecting 34 kg 4.33 147.36
plate including cutting hoisting fixing in position and applying a
priming coat of approved steel primer all complete
108 Structural steel work riveted bolted or welded in built up sections, 34 kg 8.28 281.67
strusses and framed work, hoisting fixing in position and applying a
priming coat of approved steel primer all complete
109 Providing and fixing in position collapsible steel shutters with vertical 34 sqm 1372.75 46673.52
channels 20x10x2mm and braced with flat iron diagonals 20x5mm size
with top and bottom rail of T-iron 40x40x6mm dia steel pulleys
complete with bolts nuts locking arrangement stoppers handles
including applying a priming coat of approved steel primer

110 Providing and fixing 1mm thick MS sheet sliding shutters with frame 34 sqm 627.85 21347.02
and diagonal braces of 40x40x6 mm angle iron 3mm MS gusset plates
at the juction and corners 25mm dial pully 40x40x6mm angle and T-
iron guide at the top and bottom respectively including applying a
priming coat of approved steel primer

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

110 Providing and fixing 1mm thick MS sheet door with frame of
40x40x6mm angle iron and 3mm gusset plates at the junctios and
corners all necessary fitting complete including applying a priming coat
of approved steel primer

110.1 Using MS angles 40x40x6mm for diagonal bracesss 34 sqm 1693.55 57580.79
110.2 Using flat 30x6mm for diagonal bracess and central cross piece 34 sqm 1598.25 54340.59
111 Supplying and fixing rolling shutters of approved make made of
required size MS laths interilocked together through their entire lengh
and jointed together at the end by end locks mounted on specially
designed pipe shaft with brackets side guides and arrangement for
inside and outside locking with push and pull operation complete
including the cost of providing and fixing necessary 27.5cm long wire
spring grade No. 2 and MS top cover of required thickness for rolling
shutters

111.1 80x1.25mm MS laths with 1.25mm thick top cover 34 sqm 1208.45 41087.30
111.2 80x1.20mm MS laths with 1.20mm thick top cever 34 sqm 965.35 32821.90
111.3 80x0.90mm MS laths with 0.90mm thick top cover 34 sqm 911.10 30977.40
112 Providing and fixing mechanical device chain and crank operation for 34 each 356.50 12121.00
operating rolling shutters
113 Extra for providing mechanical device chain and crank operation for
operating rolling shutters
113.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area 34 sqm 480.30 16330.20
113.2 Exceeding 16.80 sqm in area 34 sqm 538.40 18305.60
114 Extra for providing grilled rolling shutters manufactured out of 8mm 34 sqm 214.90 7306.60
dia MS bar instead of laths as per design approved by engineer in
charge (area of grill to be measured)
115 fixing standard steel glazed doors windows and ventilators in walls 34 kg 22.51 765.47 Cement / Steel will be issued free of
with 15x3mm lugs 10cm long embedded in cement concrete blocks cost from BHEL Stores
15x10x10cm of 1:3:6( 1 cement 3 coarse sand 6 graded stone aggrigate
20mm nominal size) or with wooden plugs and screws or rawl plugs
and screws or with fixing clips or with bolts and nuts as required
including fixing of float glass panes with glazing clips and special metal
sash putty of approved make or metal beading with screws(only steel
windows with lugs glass panes cut to size and glazing clips or metal
beading with screws shall be supplied by department free of cost)

116 Providing and fixing factory made ISI marked steel glazed doors, 34 kg 45.56 1548.90 Cement / Steel will be issued free of
windows and ventilators side top centre hung with beading and all cost from BHEL Stores
members such as K11B and K12B etc.complete of standard rolled steel
sections joints metres and flash butt welded and sash bars tenoned
and riveted with 15x3mm lugs, 10cm long, embedded in cement
concrete blockes 15x10x10cm of 1:3:6(1cement 3 coarse sand 6 grade
stone aggregate 20mm nominal size) or with wooden plugs and screws
or rawl plugs and screws or with fixing clips or with bolts and nuts as
required, including providing and fixing of hinges, pivots, float, glass
panes with glazing clips and special metal sash putty of approved
make and a priming coat of approved steel primer excluding the cost of
metal beading and other fitting except necessary hinges or pivots
complete as per approved design.

117 Extra for providing and fixing steel beading of approved shape and 34 mtr 21.45 729.30
section with screw instead of glazing clips and metal sash putty in
steel doors , wondows ventilators and composite units.
118 Providing and fixing T-iron frames for doors windows and ventilators of 34 kg 11.96 406.68 Cement / Steel will be issued free of
mild steel tee- section, joints mitred and welded with 15x3mm lugs cost from BHEL Stores
10cm long embedded in cement concrete blocks 15x10x10cm of
1:3:6(1cement 3 coarse sand 6 grade stone aggrigate 20mm nominal
size) or with wooden plugs and screws or rawl plugs and screws or
with dash fastener or with fixing clps or with bolts and nuts as require
including fixing of necessary butt hinges and screws and applying a
primming coat of approved steel primer

119 Providing and fixing pressed steel door frames confirming to IS 4351
manufactured from commercial mild steel sheet of 1.25mm thickness
including hinges jamb , lock , jamb, bead and if required angle
threshold of mild steel angle of section 50x25mm or base ties of
1.25mm pressed mild steel welded or rigidly fixed together by
mechanical means adjustable lugs with split end tail to each jamb
including steel butt hinges 2.5mm thick with mortar guards, lock ,
strikeplate and shock absorbers as specified and applying a coat of
approved steel primer after pre treatment of the surface as directed by
engineer in charge

119.1 Profile B 34 mtr 251.90 8564.60

119.2 Profile C 34 mtr 271.65 9236.10
119.3 Profile E 34 mtr 303.00 10302.00

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

120 Providing and fixing MS Tubular frames for doors windows ventilators 34 kg 22.21 755.14 Cement / Steel will be issued free of
and cupboard with L-Type section made of 1.60mm thick MS sheet cost from BHEL Stores
joints mitred and welded and grinded finish profiles required size with
15x3m plugs 10cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6(1 cement 3 coarse sand 6 grade stone aggregate
20mm nominal size ) or with wooden plugs and screws or rawl plugs
and screws or with fixing clips or with bolts and nuts as required
including fixing of necessary butt hinges and screws and applying a
priming coat of approved steel primers.

121 steel work in built up tubular trusses including cutting hoisting fixing
in position and applying a priming coat of approved steel primer,
welded and bolted including special shaped washers etc.complete

121.1 Hot finished welded type tybes 34 kg 61.50 2091.00

121.2 Hot finished seamless type tubes 34 kg 66.35 2255.90
121.3 Electric resistance or induction butt welded tubes 34 kg 79.80 2713.20
122 providing and fixing MS fan clamp type I or II of 16 mm dia MS bar 34 each 15.05 511.84
bent to shape with hooked ends in RCC slabs, beams during laying
including painting the exposed portion of of loop all as per standard
design complete

123 Providing and fixing circular / Hexagonal cast iron or MS sheet box for 34 each 52.43 1782.69
ceiling fan clamp of internal dia 140mm, 73mm height, top lid of
1.5mm thick MS sheet with its top surface hacked for proper bonding
top lid shall be screws into the cast iron/ MS sheet box by means of
3.3 mm dia. round headed screws , one lock at the corners . clamp
shall be made of 12mm dia MS bar bent to shape as per standard
drawing.

124 Providing and fixing MS round holding down bolts with nuts and 34 kg 4.35 147.73
washer plates complete
125 Providing and fixing bolts including nuts and washers complete 34 kg 12.87 437.58
126 Providing and fixing MS rivets of sizes in positio. 34 kg 29.30 996.20
127 Welding by gas or electric plant including transportation of plant at 34 cm 1.45 49.30
site etc. complete
128 Providing and fixing bright finished brass casement window fastener or 34 kg 226.05 7685.70
peg stays to windows/ ventilation with necessary welding and machine
screws etc. complete
129 Providing and fixing 14mm bright finished brass spring catch to steel 34 each 27.65 940.10
centre hung ventilators with necessary welding and machine screws
etc. complete
130 Steel work welded in built up sections/ frames work including cutting
hoisting fixing in position and applying a priming coat of approved
steel primer using structural steel etc. as required,
130.1 In stringers treads landing etc, of stair cases including use of 34 kg 48.95 1664.30
chequered plate wherever required all complete
130.2 In gratings frames guard bar ladder railing brackets gates and similar 34 kg 51.20 1740.80
works
131 Providing and fixing hand rail of approved size by welding etc. to steel
ladder railing balcony railling and staircase railing including applying a
priming coat of approved steel primer
131.1 M.S tube 34 kg 62.35 2119.90
131.2 ERW tubes 34 kg 82.25 2796.50
131.3 GI pipes 34 kg 68.25 2320.50

FLOORING/TILE WORK
132 Cement concrete flooring 1:2:4( 1cement 2 coarse sand 4 graded stone
aggregate) fineshed with a floating coat of neat cement including
cement slurry but excluding the cost of nosing of steps etc. complete.

132.1 40mm thick with 20mm nominal size stone aggregate 34 sqm 103.22 3509.62 Cement / Steel will be issued free of
cost from BHEL Stores
133 Cement plaster skiriting (upto 30cm height) with cement mortar 1:3 (
1cement 3 coarse sand ) finished with a floating coat of neat cement

133.1 18mm thick 34 sqm 94.61 3216.67 Cement / Steel will be issued free of
cost from BHEL Stores
134 Providing and fixing 1st quality ceramic glazed wall tiles conforming to 34 sqm 491.05 16695.61 Cement / Steel will be issued free of
IS 15622 (thickness to be specified by the manufacture ) of approved cost from BHEL Stores
make in all colours, shades except burgundy bottle green black of any
size as approved by engineer in charge in skirting risers of steps and
dados over 12mm thick bed of cement including pigment of matching
shade etc. complete as per drawing specification and direction of
engineer in charge

135 Providing and laying ceramic glazed floor tiles 300x300mm ( thickness 34 sqm 533.10 18125.31 Cement / Steel will be issued free of
to be specified by the manufacture) of 1 st quality conforming IS 15622 cost from BHEL Stores
of approved make in colours such as white lvory grey fume red brown
laid on 20mm thick cement mortar 1:4( 1 cement 4 coarse sand )
including pointing the joints with white cement and matching pigment
etc. complete.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

136 Providing and laying ceramic glazed floor tiles 300x300mm ( thickness 34 sqm 565.25 19218.41 Cement / Steel will be issued free of
to be specified by the manufacturer ) of 1st quality conforming to IS cost from BHEL Stores
15622 of approved make in all colours shades except white lvory, grey,
gume red brown laid on 20mm thick bed of cement mortar 1:4( 1
cement 4 coarse sand ) including pointing the jointing the joints with
white cement and matching pigment etc. complete

137 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm 34 sqm 694.35 23607.81 Cement / Steel will be issued free of
ormore (thickness to be specified by the manufacturer) of 1st cost from BHEL Stores
qualityconforming to IS : 15622 of approved make in colours White,
Ivory,Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4
(1Cement : 4 Coarse sand) including grouting the joints with white
cementand matching pigments etc., complete.

138 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm 34 sqm 734.85 24984.81 Cement / Steel will be issued free of
ormore (thickness to be specified by the manufacturer) of 1st cost from BHEL Stores
qualityconforming to IS : 15622 of approved make in all colours,
shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thickCement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing
thejoints with white cement and matching pigments etc., complete.

139 Providing and laying polished vitrified floor tiles in different size (
thickness to be specified by the manufacture ) with water absorption's
less than 0.08% and conforming to IS 15622 of approved make in all
colours and shade, laid on20mm thick cement mortar 1:4( 1cement 4
coarse sand ) including grouting the joints with white cement and
matching pigment etc. complete

139.1 Size of tile 50x50cm 34 sqm 966.35 32855.90

139.2 Size of tile 60x60cm 34 sqm 1031.85 35082.90
139.3 Size of tile 80x80cm 34 sqm 1478.30 50262.20
139.4 Size of tile 100x100cm 34 sqm 1733.05 58923.70
140 Deduct for not using 20mm thick cement mortar 1:4( 1 cement 4 34 sqm 233.95 7954.30
coarse sand ) bending in laying of floor tiles
141 Fixing glazed / ceramic vitrified floor tiles with cement based high 34 sqm 224.70 7639.80
polymer modified quick set tile adhesive (water based ) conforming to
IS 15477 using 5 kg adhesive per sqm of tile area in average 3mm
thickness

142 Ellis pattern flooring 20 mm thick cement concrete using one 34 One Sqm 78.14 2656.82 Cement / Steel will be issued free of
cement and three granite stone metal chippings of 3 to 10mm guage cost from BHEL Stores
including fine finishing, neat thread lining, curing, cost of all materials
etc. complete.

143 Flooring with rough shahabad stone slabs of 20 to 30 mm thick 34 One Sqm 71.63 2435.51 Cement / Steel will be issued free of
and approved quality over a base of cement mortar 1:6 and pointing cost from BHEL Stores
with CM 1:3 including curing, cost of all materials etc. complete.

144 Flooring / dadoing polished shahabad stone slabs of 25 mm thick 34 One Sqm 291.22 9901.57 Cement / Steel will be issued free of
(Tandur blue) uniform shade and approved quality, over a base of cost from BHEL Stores
cement mortar 1:6 and pointing with cement paste including curing,
cost of all materials etc.complete.
145 Removing the existing flooring and redoing the same with Ellis pattern 34 One Sqm 87.14 2962.82 Cement / Steel will be issued free of
flooring 20 mm thick cement concrete using one cement and three cost from BHEL Stores
granite stone chippings of 3 to 10 mm gauge including fine finishing,
neat thread lining, curing, disposing off the spoils within a lead of 2
km etc. complete as directed by the Engineer- in-charge.

146 Removing the existing flooring and supply and fixing of coloured 34 One Sqm 477.45 16233.21 Cement / Steel will be issued free of
glazed tiles of Kajaria / Johnson or other approved make equivalent in cost from BHEL Stores
all respects ceramic tiles of commercial grade of approved size, of
approved shade and design for flooring and dado over a base of CM 1:4
including neat finishing and jointing with colour cement etc, complete.
The rate shall include removing the existing floor and disposing of the
debris to specified areas within a lead of 2 km (corners are to be
jointed by metering the tiles).

147 Polishing to the existing mosaic / polished shahbad stone flooring 34 One Sqm 20.00 680.00
using necessary / machines/materials such as carborandam stone etc
including neat finishing etc complete as directed by Engineering - in -
charge..

148 Removing the exiting cement flooring, supplying and laying of 25 mm 34 One Sqm 600.86 20429.27 Cement / Steel will be issued free of
thick ( ± 1 mm) designer floor tiles of approved colour and brand over cost from BHEL Stores
a base of cement mortar 1:4, 20 mm thick, with required quantity of
cement slurry for flooring including colouring pigment to match with
tiles, cost of all materials etc complete all as directed by Engineer-in-
charge.

ROOFING
149 Providing and fixing on wall face unplasticised rigid pvc rain water
pipes conforming to IS 13592 type a including jointing with seal ring
conforming to IS 5382 leaving 10mm gap for thermal expansion (i)
single socketed pipes

149.1 75mm diameter 34 mtr 95.00 3230.00

149.2 110mm diameter 34 mtr 163.40 5555.60

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

150 Providing impervious coat in CM 1:4, 20 mm thick using approved 34 One Sqm 77.95 2650.44
water proofing compound at one Kg/bag of cement when the roof slab
is green including arranging proper slopes, for easy flow of rain water,
curing etc complete.

151 Fixing of Roofing Sheets

151.1 Labour charges for fixing AC sheet roofing and ceiling using 'J' bolts, 34 One Sqm 40.00 1360.00 AC sheets and ridges will be
nuts, bitumen / GI washers etc.complete, (only AC sheets and ridges supplied free of cost at BHEL stores
will be supplied free of cost at BHEL stores) all as directed by Engineer -
in - charge.

151.2 Fixing of Hi-rib s galvalume /Zincalume sheets of 0.5 mm tk. 1 mtr width and 34 One Sqm 75.00 2550.00 Galvalume sheets will be issued free
length upto 12 mts with factory cut and fixing to the roof shall be crest fixed to of cost by BHEL attheir stores
roofpurlins with number 12-14 x 55 mm polymer coated galvanised hex head
self drilling screws with integral washers and EPDM seals (4 fasteners for
support) for sheet etc., complete asdirected (Excluding cost of galvalume
sheets which will be issued free of cost by BHEL attheir stores) - For
roofing, side cladding and louvers with necessary fixtures. All the safety
measures should be taken care by the agency itself.

151.3 Fixing North Light curves/ Barges in required girth with 0.5 mm galvalume 34 One Rmt 55.00 1870.00 Barge boards will be issued free of
sheets upto a length of 2.5 M having curved width upto 600 mm fixing to the cost by BHEL attheir stores
steel members with self drilling / self stitching, fasteners at a maximum of 500
mm c/c along the length of capping,flashing etc.,complete as directed by
Engineer-in-charge.
including the cost of labouretc.,complete.(North Light Curves / Barges Will
beissued free of cost by BHEL at their Stores).All the safety measures
should be taken by the agency itself.
152 Dismantling the existing garrage structural work, AC sheets and MS 34 Each 3705.50 125987.00
angles including stacking & handing over of service cable materials Shed
and disposal of debris all as directed by Engineering - in - charge.

FINISHING
153 12mm cement plaster of mix
153.1 1:4( 1 cement 4 fine sand) 34 sqm 48.68 1655.10 Cement / Steel will be issued free of
cost from BHEL Stores
153.2 1:6( 1 cement 6 fine sand) 34 sqm 48.65 1654.07 Cement / Steel will be issued free of
cost from BHEL Stores
154 15mm cement plaster on the rough side of single or half brick wall of
mix
154.1 1:4( 1 cement 4 fine sand) 34 sqm 55.83 1898.28 Cement / Steel will be issued free of
cost from BHEL Stores
154.2 1:6( 1 cement 6 fine sand) 34 sqm 55.85 1899.06 Cement / Steel will be issued free of
cost from BHEL Stores
155 20mm cement plaster of mix
155.1 1:4( 1 cement 4 fine sand) 34 sqm 65.53 2228.16 Cement / Steel will be issued free of
cost from BHEL Stores
155.2 1:6( 1 cement 6 fine sand) 34 sqm 65.54 2228.47 Cement / Steel will be issued free of
cost from BHEL Stores
156 12mm cement plaster of mix
156.1 1:4( 1 cement 4 coarse sand) 34 sqm 53.68 1825.10 Cement / Steel will be issued free of
cost from BHEL Stores
156.2 1:6( 1 cement 6 fine sand) 34 sqm 53.70 1825.77 Cement / Steel will be issued free of
cost from BHEL Stores
157 15mm cement plaster on the rough side of single or half brick wall of
mix
157.1 1:4( 1 cement 4 coarse sand) 34 sqm 61.83 2102.28 Cement / Steel will be issued free of
cost from BHEL Stores
157.2 1:6( 1 cement 6 coarse sand) 34 sqm 61.85 2103.06 Cement / Steel will be issued free of
cost from BHEL Stores
158 20mm cement plaster of mix
158.1 1:4( 1 cement 4 coarse sand) 34 sqm 73.33 2493.36 Cement / Steel will be issued free of
cost from BHEL Stores
158.2 1:4( 1 cement 4 coarse sand) 34 sqm 73.34 2493.67 Cement / Steel will be issued free of
cost from BHEL Stores
159 18mm cement plaster in two coats under layer 12mm thick cement 34 sqm 78.11 2655.73 Cement / Steel will be issued free of
plaster 1:5( 1 cement 5 coarse sand ) finished with a top layer 6mm cost from BHEL Stores
thick cement plaster 1:6( 1cement 6 fine sand )
160 18mm cement plaster in two coats under layer 12mm thick cement 34 sqm 80.59 2740.06 Cement / Steel will be issued free of
plaster 1:5( 1 cement 5 coarse sand ) finished with a top layer 6mm cost from BHEL Stores
thick cement plaster 1:3( 1cement 3 coarse sand ) finished rough with
sponge.

161 6mm cement plaster of Mix

161.1 1:3( 1 cement 3 fine sand) 34 sqm 42.78 1454.51 Cement / Steel will be issued free of
cost from BHEL Stores
162 12mm thick plain cement mortar bands in cement mortar 1:4( 1
cement 4 fine sand)
162.1 Flush Band 34 cm per 1.07 36.39 Cement / Steel will be issued free of
mtr cost from BHEL Stores
162.2 Sunk Band 34 cm per 1.17 39.79 Cement / Steel will be issued free of
mtr cost from BHEL Stores
162.3 Raised Band 34 cm per 1.37 46.59 Cement / Steel will be issued free of
mtr cost from BHEL Stores
162.4 Moulded Band 34 cm per 2.32 78.89 Cement / Steel will be issued free of
mtr cost from BHEL Stores
163 18mm thick plain cement mortar band in cement mortar 1:4( 1 cement
4 fine sand)

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

163.1 Flush Band 34 cm per 1.30 44.16 Cement / Steel will be issued free of
mtr cost from BHEL Stores
163.2 Sunk Band 34 cm per 1.45 49.26 Cement / Steel will be issued free of
mtr cost from BHEL Stores
163.3 Raised Band 34 cm per 1.65 56.06 Cement / Steel will be issued free of
mtr cost from BHEL Stores
163.4 Moulded Band 34 cm per 3.15 107.06 Cement / Steel will be issued free of
mtr cost from BHEL Stores
164 Pointing on stone work with cement mortar 1:3( 1 cement 3 fine sand)

164.1 Flush / Ruled pointing 34 sqm 56.32 1915.04 Cement / Steel will be issued free of
cost from BHEL Stores
164.2 Raised and cut pointing 34 sqm 99.60 3386.29 Cement / Steel will be issued free of
cost from BHEL Stores
165 Raised and cut pointing on stone work in white cement mortar 1:3( 1 34 sqm 125.95 4282.30
white cement 3 marble dust)
166 White washing with lime to give an even shape
166.1 New work ( three or more coats) 34 sqm 6.75 229.50
167 Colour washing such as green , blue or buff to buff to give an even
shape
167.1 New work ( two or more coats ) with a base coat of white washing with 34 sqm 9.30 316.20
lime
167.2 New work ( two or more coats ) with a base coat of whiting 34 sqm 9.10 309.40
168 Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade
168.1 New work (two or more coats) over and including priming coat with 34 sqm 41.55 1412.70
cement primer.
169 Distempering with 1st quality acrylic washable distemper (ready mixed)
of approved manufacture and of required shade and colour complete as
per manufacturer specification
169.1 Two or more coats on new work 34 sqm 23.55 800.70
170 Applying one coat of cement primer of approved brand and
manufacture on wall surface
170.1 Cement primer 34 sqm 17.20 584.80
171 Finishing walls with Acrylic smooth exterior paint of required shade

171.1 New work ( two or more coat applied @ 1.67 ltr/ 10 sqm ) over and 34 sqm 96.25 3272.50
including base coat of water proofing cement paint applied @ 2.20kg/
10sqms
171.2 Painting the external wall surfaces by applying two or more coats of 34 Sqm 12.70 431.80 Paint will be issued free of cost from
Acrylic smooth exterior paint (after completion of one coat prior BHEL stores
clearance to be taken to apply the second coat with department
officials) of BHEL supplied paint on existing old surface, including
scrapping, cost of thinner, brushes labour, ladders, scaffolding, tools
and other incidentals etc. complete up to 7m height including
rectifying the wall cracks, patches etc with Birla wall care putty crack
filler etc complete all as directed by Engineer-in-charge (only acrylic
paint will be supplied by BHEL, free of cost at Township stores as per
norms. Separate payment will be made for Birla wall care putty). All
the safety precautions would be responsibility of the contractor.

172 Painting one thin coat with white lead of approved brand and 34 sqm 22.60 768.40
manufacture on wet or patchy portion of plastered surfaces
173 finishing with expoxy paint (two or more coats) at all locations
prepared and applied as per manufacturer's specifications including
appropriate priming coat preparation fo surface etc. complete

173.1 on steel work 34 sqm 75.25 2558.50

173.2 on concrete work 34 sqm 77.75 2643.50
174 Painting (two or more coats) on rain water soil waste and vent pipes
and fitting with black anticorrosive bitumastic paint approved brand
and manufacture over and including a priming of ready mixed zinc
chromate yellow primer on new work

174.1 100mm dia meter pipes 34 mtr 15.05 511.70

174.2 150mm dia meter pipes 34 mtr 22.50 765.00
175 Painting with synthetic enamal paint of approved brand and
manufacture to give an even shade
175.1 Two or more coats on new work 34 sqm 35.35 1201.90
175.2 Two or more coats on new work over an under coat of suitable shade 34 sqm 51.30 1744.20
with ordinary paint of approved brand and manufacture
175.3 Applying two or more coats of Synthetic Enamel Paint of given shade 34 Sqm 13.60 462.40 Paint will be issued free of cost from
to old surfaces including scrapping, cost of thinner, brushes, labour BHEL stores
tools, and other incidentals etc. complete up to 7m height. (Only
Synthetic Enamel Paint will be supplied by BHEL, free of cost at their
stores) etc. complete all as directed by Engineer-in-charge. All the
safety precautions would be responsibility of the contractor.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

176 Painting with aluminium paint of approved brand and manufacture to

give an even shade
176.1 Two or more coats on new work 34 sqm 28.60 972.40
177 Varnishing with varnish of approved brand and manufacture
177.1 Two or more coats of glue sizing with copal varnish over an under coat 34 sqm 49.20 1672.80
of flatting varnish
177.2 Two or more coats glue sizing with spar varnish or an under coat of 34 sqm 50.80 1727.20
flatting varnish

REPAIRS TO BUILDINGS
178 Providing and fixing 25mm thick shutters for cup board etc
178.1 Panelled or Panelled and glazed shutters
178.1.1 Superior class teak wood including nickel plated bright finished MS 34 sqm 2400.25 81608.50
piano hinges with necessary screws
178.1.2 1st class teak wood including nickel plated bright finished MS piano 34 sqm 1563.50 53159.00
hinges with necessary screws
178.2 Nil
178.3 Nil
178.4 Glazed shutters
178.4.1 Superior class teak wood including nickel plated bright finished MS 34 sqm 2538.20 86298.80
piano hinges with necessary screws
178.4.2 1st class teak wood including nickel plated bright finished MS piano 34 sqm 1638.75 55717.50
hinges with necessary screws
179 White washing with lime to give an even shape
179.1 old work (two or more coats) 34 sqm 4.10 139.40
179.2 old work (two or more coats) 34 sqm 2.55 86.70
180 Removing white or colour wash by scrapping and sand papering and 34 sqm 3.20 108.80
preparing the surface smooth including necessary repairs to scratches
etc. complate
181 Distempering with dry ditemper of approved brand and manufacture ( 34 sqm 12.35 419.90
two or more coats) and of required shade on new work, over and
including priming coat of whiting to give an even shade

182 Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade
182.1 old work (two or more coats) 34 sqm 14.90 506.60
183 Removing dray or oil bound distemper water proofing cement paint and 34 sqm 4.25 144.50
the like by scrapping sand papering and preparing the surface smooth
including necessary repairs to scratches etc. complete

184 Painting with synthetic enamal paint of approved brand and

manufacture to give an even shade
184.1 one or more coats on old work 34 sqm 22.85 776.90
185 Finishing walls with Acrylic smooth exterior paint of required shade

185.1 old work (two or more coats applied @ 1.67ltr/10sqm ) on exising 34 sqm 36.30 1234.20
cement paint surface)
185.2 old work (one or more coat applied @0.90 ltr/ 10sqm) 34 sqm 22.80 775.20
186 Painting to black boards with one coat of black board paint of 34 One Sqm 22.85 776.90
approved brand including cost of all materials etc., complete all as
directed by Engineer-in-charge.
187 Applying golden colour or other approved colour to statues from 3' 34 Nos 1500.00 51000.00
height to 8' height statue painting including scrapping the old surface
and applying one or more coats to give good appearance including cost
of scafolding cost of all material all as directed by Engineer-in-charge.

188 Applying one coat of synthetic enamel paint of approved shade and 34 One Sqm 22.85 776.90
brand to old iron work including scraping, cost of all materials etc.,
complete all as directed by Engineer-in-charge.
189 Applying two coats of synthetic enamel paint of approved shade and 34 One Sqm 46.49 1580.66
brand to old iron work including scraping, cost of all materials etc.,
complete all as directed by Engineer-in-charge.
190 Providing gultas in traingular shape of base 150 mm and height 150 34 One Rmt 6.53 221.92
mm with cement mortar 1:4, including fine finishing, cost of all
materials etc complete all as directed by Engineer-in-charge.

191 Providng bands to slab / chajja projections in cement mortar 1:4, 20 34 One Rmt 24.43 830.76
mm thick and 20 mm wide including cost of all materials, curing etc
complete all as directed by Engineer-in-charge.

192 Flooring and skirting with 25 mm thick polished shahabad stone 34 One Sqm 309.59 10526.06
slabs (Tandur blue) of required sizes over a base of 20 mm thick
cement mortar 1:6 including pointing in CM 1:2, curing, cost of all
materials etc complete all as directed by Engineer-in-charge

193 Removing the existing cement / mosaic / floor finishing and redoing 34 One Sqm 132.57 4507.44
the same with 20 mm thick ellis pattern flooring in cement concrete
using one cement and three granite stone chippings of 3 to 10 mm
guage including fine finishing, neat thread lining, curing cost of all
materials, disposing off the spoils within a lead of 2 kms etc complete
as directed by the Engineer-in-charge.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

194 Rectifying the wall cracks by chipping off the existing plastered 34 One Sqm 88.39 3005.37
surfaces to the required width, depth and applying cement slurry in
the cracks to the required depth, making good all damages and
finishing to match with the existing one by plastering with CM 1:5;
12/15 mm thick and a coat of white wash / snowcem / distemper etc
as the case may be as directed by the Engineer-in-charge.

195 Crack filling without pressure grouting: Routing out the cracks with a 34 Rmt 75.00 2550.00
mechanically operated groove cutter and sealing with expansive crack
filling compound - CERA POLY CRACKFFILLER or equivalent and
tooling to finish neatly. Providing ,two top coats of CRACKFLEX, single
component hinghly flexible membrance coating (for a width of 10 cms
with the crack at the center) or equivalent as per manufacturer's
recommendation and curing adequately. Rate quoted includes cost of
material, labour charges, conveyance, toold and all other incidental
charges etc complete all as directed by Engineering - in -charge. (local
market rate)

DISMANTLING AND DEMOLISHING

196 Demolishing lime concrete manually / by mechanical means and 34 cum 128.45 4367.30
disposal of material within 50mtr lead as per direction of engineer in
charge
197 Demolishing concrete manually / by mechanical means including
disposal of material within 50mtr lead as per direction of engineer in
charge
197.1 1:3:6 or richer mix 34 cum 368.45 12527.30
197.2 1:4:8 or leaner mix 34 cum 226.90 7714.60
198 Demolishing RCC work manually/ by mechanical means including 34 cum 537.55 18276.70
stacking of steel bars and disposal of unserviceable material within
50mtr lead as per direction of engineer in charge

199 Extra for cutting reinforcement bars manually by mechanical means in 34 sqm 176.35 5995.90
RCC or RB work (payment shall be made on the cross sectional area of
RCC or RB work) as per direction of engineer in charge

200 Extra for scrapping, cleaning and straightening reiforcement from RCC 34 kg 1.45 49.30
or RB work
201 Demolishing brick work manually / by mechanical means including
stacking of serviceable material and disposal of unserviceable material
within 50mtr lead as per direction of engineer in charge

201.1 In mud mortar 34 cum 106.45 3619.30

201.2 in lime mortar with old mughal bricks 34 cum 268.25 9120.50
201.3 in lime mortar 34 cum 128.45 4367.30
201.4 In cement mortar 34 cum 310.75 10565.50
202 Demolishing stone rubble masonry manually by mechanical means
including stacking of serviceable material and disposal of
unserviceable material within 50mtr lead as per direction of engineer
in charge

202.1 In lime mortar 34 cum 175.05 5951.70

202.2 In cement mortar 34 cum 370.75 12605.50
203 Dismantling door windows and clerestory windows (steel or wood )
quantity of stacks of cleaned material will be measured)
203.1 Of area 3sqm and below 34 each 54.60 1856.40
203.2 Of area beyond 3sqm 34 each 75.35 2561.90
204 Taking out doors windows and clerestory window shutters(steel or
wood) including stacking within 50mtr lead
204.1 Of area 3sqm and below 34 each 21.40 727.60
204.2 Of area beyond 3sqm 34 each 28.25 960.50
205 Dismantling wood in frames trusses purlins and rafters upto 10mtr
span and 5 mtr height including stacking the material within 50mtr
lead
205.1 Of sectional area 40 square centimetres and above 34 cum 658.65 22394.10
205.2 Of sectional area below 40 square centimetres 34 mtr 2.65 90.10
206 Dismantling steel work in single sections including dismembering and
stacking within 50mtr lead in
206.1 RS joists 34 kg 0.50 17.00
206.2 Channels angles tees and flats 34 kg 0.35 11.90
207 Dismantling steel work in built up sections in angles tees flats and 34 kg 0.85 28.90
channels including all gusset plates bolts nuts cutting rivets welding
etc. including dismembering and stacking within 50mtr lead

208 Dismantlig steel work manually by mechanical means in built up 34 kg 0.60 20.40
section without dismembering and stacking within 50mtr lead as per
direction of engineer in charge
209 Extra for dismantling trusses raftes purlins etc. of steel work for every 34 kg per 0.15 5.10
additional span of one meter or part thereof beyond 10mtr mtr span
210 Dismantling precast concrete or stone slabs in walls partition walls
etc. including stacking within 50mtr lead
210.1 Thickness upto 40mm 34 sqm 44.10 1499.40

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

210.2 Thickness above 40mm upto 75mm 34 sqm 66.05 2245.70

211 Dismantling cement asbestos or other hard board ceiling or partition 34 sqm 8.60 292.40
walls including stacking of serviceable materials and disposal of
unserviceable materials within 50mtr lead
212 Dismantling G.I pipes ( external work ) including excavation and
refilling trenches after taking out the pipes manually by mechanical
means including stacking of pipes within 50mtr lead as per direction of
engineer in charge

212.1 15mm to 40mm nominal bore 34 mtr 24.90 846.60

212.2 Above 40mm nominal bore 34 mtr 29.05 987.70
213 Dismantling old plaster or skirting raking out joints and cleaning the 34 sqm 8.20 278.80
surface for plaster including disposal of rubbish to the dumping
ground within 50mtr lead
214 Dismantling aluminium / Gypsum partitions doors windows fixed 34 sqm 8.65 294.10
glazing and false ceiling including disposal of unserviceable surplus
material and stacking of serviceable material with in 50mtr lead as
directed by engineer in charge

215 Demolishing C.C/ RCC work by mechanical means and stockpilling at 34 cum 731.05 24855.70
designated locations and disposal of dismantled materials upto a lead
of 1000m , stacking serviceable and unserviceable material separately
including cutting reinforcement bars

SANITARY WORKS
216 Dismantling, Providing and fixing water closet squatting pan(indian
type WC pan) with 100mm sand cast iron P or S trap 10 ltr low level
white PVC flushing cistern with manually controlled device (handle
level) conforming to IS 7231 with all fitting and fixtures complete
including cutting and making good the walls and floors wherever
required

216.1 White vitreous china orissa pattern WC pan of size 580x440mm with 34 each 2278.26 77460.84 Cement / Steel will be issued free of
integral type foor rests cost from BHEL Stores
216.2 Stainless steel AISI 304(18/8)orissa pattern WC pan of size 34 each 5356.21 182111.14 Cement / Steel will be issued free of
585x480mm with flush pipe and integrated type foot rests cost from BHEL Stores
217 Nil
218 Dismantling, Providing and fixing white vitreous china pedestal type
water closet (european type WC pan) with seat and lid 10ltr low level
white PVC flushing cistern with manually controlled decice (handle
level) conforming to IS 7231 with all fittings and fixtures complete
including cutting and making good the wall and floors wherever
required

218.1 WC pan with ISI marked white solid plastic seat and lid 34 each 2126.11 72287.74 Cement / Steel will be issued free of
cost from BHEL Stores
218.2 WC pan with ISI marked black solid plastic seat and lid 34 each 2097.06 71300.04 Cement / Steel will be issued free of
cost from BHEL Stores
219 Dismantling, Providing and fixing white vitreous china pedestal type
water closet (european type )with seat and lid 10 ltr low level white
vitreous china flushing cistern and CP flush bend with fitting and CI
brackets 40mm flush bend overflow arrangement with specials of
standard make and mosquito proof coupling of approved municipal
desgin complete including painting of fitting and brackets cutting and
making good the walls and floors wherever required

219.1 WC pan with ISI marked white solid plastic seat and lid 34 each 3256.56 110723.04 Cement / Steel will be issued free of
cost from BHEL Stores
219.2 WC pan with ISI marked black solid plastic seat and lid 34 each 3227.56 109737.04 Cement / Steel will be issued free of
cost from BHEL Stores
220 Dismantling, Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350mm and
430x410x265mm sizes respectively with automatic flushing cistern
with standard flush pipe and CP brass spreaders with brass unios and
GI clamps complete including painting of fitting and brackets cutting
and making good the walls and floors wherever required

220.1 One urinal basin with 5 ltr white PVC automatic flushing cistern 34 each 2005.51 68187.17 Cement / Steel will be issued free of
cost from BHEL Stores
220.2 Range of two urinal basins with 5 ltr white PVC automatic flushing 34 each 3372.49 114664.59 Cement / Steel will be issued free of
cistern cost from BHEL Stores
220.3 Range of three urinal basins with 10 ltr white PVC automatic flushing 34 each 4456.24 151512.07 Cement / Steel will be issued free of
cistern cost from BHEL Stores
220.4 Range of four urinal basins with 10 ltr white PVC automatic flushing 34 each 6012.06 204410.01 Cement / Steel will be issued free of
cistern cost from BHEL Stores
221 Dismantling, Providing and fixing white vitreous china flat back half
stall urinal of size 580x380x350mm with white PVC automatic flushing
cistern with fitting standard size CP brass flush pipe spreaders with
unions and clamps (all in CP brass) with waste fitting as per IS 2556
CI trap with outlet grating and other couplings in CP brass including
painting of fitting and cutting and making good the walls and floors
wherever required

221.1 Single half stall urinal with 5 ltr PVC automatic flushing cistern 34 each 3693.38 125574.99 Cement / Steel will be issued free of
cost from BHEL Stores
221.2 Range of two half stall urinal with 5 ltr white PVC automatic flushing 34 each 5906.91 200835.09 Cement / Steel will be issued free of
cistern cost from BHEL Stores

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

221.3 Range of three half urinal with 10 ltr white PVC automatic flushing 34 each 7855.75 267095.38 Cement / Steel will be issued free of
cistern cost from BHEL Stores
221.4 Range of four half urinal with 10 ltr white PVC automatic flushing 34 each 9704.26 329944.72 Cement / Steel will be issued free of
cistern cost from BHEL Stores
222 Dismantling, Providing and fixing one piece construction white vitreous
china squatting plate with an integral longitudianl flushing pipe white
PVC automatic flushing cistern with fitting standard size GI flush pipe
for back and front flush with standard spreader pipes with fitting GI
clamps and CP brass coupling complete including painting of fittinng
and cutting and making good the walls and floors etc. wherever
required

222.1 Single squatting plate with 5 ltr PVC automatic flushing cistern 34 each 2365.63 80431.49 Cement / Steel will be issued free of
cost from BHEL Stores
222.2 Range of two squatting plates with 5 ltr white PVC automatic flushing 34 each 3494.26 118804.99 Cement / Steel will be issued free of
cistern cost from BHEL Stores
222.3 Range of three squatting plates with 10 ltr white PVC automatic 34 each 4651.65 158155.98 Cement / Steel will be issued free of
flushing cistern cost from BHEL Stores
222.4 Range of four squatting plates with 10 ltr white PVC automatic 34 each 5682.31 193198.42 Cement / Steel will be issued free of
flushing cistern cost from BHEL Stores
223 Dismantling, Providing and fixing wash basin with CI brackets 15mm
CP brass pillar taps 32mm CP brass waste of standard pattern
including painting of fittings and brackets cutting and making good
the walls wherever require

223.1 White vitreous china wash basin size 630x450mm with a pair of 15 34 each 1319.71 44869.97 Cement / Steel will be issued free of
mm CP brass pillar taps cost from BHEL Stores
223.2 white vitreous china wash basin size 630x450mm with a single 15mm 34 each 1188.51 40409.17 Cement / Steel will be issued free of
CP brass pillar tap cost from BHEL Stores
223.3 White vitreous china wash basin size 550x400mm with a pair of 15mm 34 each 1162.91 39538.77 Cement / Steel will be issued free of
CP brass pillar tap cost from BHEL Stores
223.4 White vitreous china flat back wash basin size 550x400mm with single 34 each 1031.71 35077.97 Cement / Steel will be issued free of
15mm CP brass pillar tap cost from BHEL Stores
223.5 White vitreous china angle back wash basin size 600x480mm with 34 each 1136.26 38632.67 Cement / Steel will be issued free of
single 15mm CP brass pillar tap cost from BHEL Stores
223.6 White vitreous china angle back wash basin size 400x400mm with 34 each 912.06 31009.87 Cement / Steel will be issued free of
single 15mm CP brass pillar tap cost from BHEL Stores
223.7 White vitreous china flat back wash basin size 450x300mm with single 34 each 927.16 31523.27 Cement / Steel will be issued free of
15mm CP brass pillar tap cost from BHEL Stores
223.8 White vitreous china surgeon type wash basin of size 660x460mm with 34 each 2261.66 76896.27 Cement / Steel will be issued free of
a pair of 15mm CP brass pillar tap with elbow operated levers cost from BHEL Stores

223.9 White vitreous china surgeon type wash basin of size 660x460mm with 34 each 1790.16 60865.27 Cement / Steel will be issued free of
a pair of 15mm CP brass pillar tap with elbow operated levers ISI cost from BHEL Stores
marked
223.1 Stainless steel AISI 304(18/8)Round basin size 405x345mm with 34 each 2251.26 76542.67 Cement / Steel will be issued free of
single 15mm CP brass pillar tap cost from BHEL Stores
223.11 Stainless steel AISI 304(18/8) wash basin size 530x345mm with single 34 each 2077.06 70619.87 Cement / Steel will be issued free of
15mm CP brass pillar tap cost from BHEL Stores
224 Dismantling, Providing and fixing white vitreous china pedestal for 34 each 705.90 24000.60
wash basin completely recessed at the back for the reception of pipes
and fittings.
225 Dismantling, Providing and fixing kitchen sink with CI brackets CP
brass china with rubber plug 40mm CP brass waste complete
including painting the fittings and brackets cutting and making good
the walls wherever required

225.1 White glazed fire clay kitchen sink of size 600x450x250mm 34 each 1780.16 60525.27 Cement / Steel will be issued free of
cost from BHEL Stores
226 Dismantling, Providing and fixing stainless steel A ISI 304(18/8)
kitchen sink as per IS 13983 with CI brackets and stainless steel plug
40mm including painting of fitting and brackets cutting and making
good the walls wherever required

226.1 Kitchen sink with drain board

226.2 510x1040mm bowl depth 250mm 34 each 6141.16 208799.27 Cement / Steel will be issued free of
cost from BHEL Stores
226.3 510x1040mm bowl depth 225mm 34 each 5792.71 196951.97 Cement / Steel will be issued free of
cost from BHEL Stores
226.4 510x1040mm bowl depth 200mm 34 each 5211.96 177206.47 Cement / Steel will be issued free of
cost from BHEL Stores
226.5 460x915mm bowl depth 178mm 34 each 3469.71 117969.97 Cement / Steel will be issued free of
cost from BHEL Stores
226.6 Kitchen sink without drain board
226.7 610x510mm bowl depth 200mm 34 each 3426.01 116484.17 Cement / Steel will be issued free of
cost from BHEL Stores
226.8 610x460mm bowl depth 200mm 34 each 3193.71 108585.97 Cement / Steel will be issued free of
cost from BHEL Stores
226.9 470x420mm bowl depth 178mm 34 each 2148.36 73044.07 Cement / Steel will be issued free of
cost from BHEL Stores
227 Dismantling, Providing and fixing white vitreous china laboratory sink
with CI brackets CP brass china with rubber plug 40mm CP brass
waste and 40mm CP brass trap with necessary CP brass unions
complete including painting of fitting and brackets cutting and making
good the wall wherever required

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

227.1 Size 450x300x150mm 34 each 1432.91 48718.77 Cement / Steel will be issued free of
cost from BHEL Stores
227.2 Size 600x450x200mm 34 each 2287.76 77783.67 Cement / Steel will be issued free of
cost from BHEL Stores
228 Dismantling, Providing and fixing draining board with CI brackets
including painting of brackets cutting and making good the walls
wherever required
228.1 White glazed fire clay draining board of size 600x450x25mm 34 each 631.21 21461.17 Cement / Steel will be issued free of
cost from BHEL Stores
229 Dismantling, Providing and fixing white vitreous china water closet
squatting pan (indian type)
229.1 Long pattern WC pan of size 580mm 34 each 521.41 17727.77 Cement / Steel will be issued free of
cost from BHEL Stores
229.2 Orissa pattern WC pan of size 580x440mm 34 each 997.66 33920.27 Cement / Steel will be issued free of
cost from BHEL Stores
230 Extra for using coloured WC pan instead of white WC pan
231.1 Orissa pattern WC pan 580x440mm 34 each 385.21 13096.97
232 Dismantling, Providing and fixing white vitreous china pedestal type 34 each 828.06 28153.87
(european type/ wash down type ) water closet pan
233 Extra for using coloured pedestal type WC pan (european type) with 34 each 863.76 29367.67
low level cistern of same colour instead of white vitreous china WC pan
and cistern
234 Dismantling, Providing and fixing a pair of white vitreous china foot
rests of standard pattern for squatting pan water closet
234.1 250x130x30mm 34 pair 98.51 3349.17 Cement / Steel will be issued free of
cost from BHEL Stores
234.2 250x125x25mm 34 pair 99.66 3388.27 Cement / Steel will be issued free of
cost from BHEL Stores
235 Dismantling, Providing and fixing PVC low level flushing cistern with
manually controlled device (handle level) conforming to IS 7231 with
all fittings and fixtures complete
235.1 10 Ltr capacity white 34 each 709.75 24131.50
235.2 10 Ltr capacity coloured 34 each 783.85 26650.90
236 Dismantling, Providing and fixing controlled flush low level cistern
made of vitreous china with all fitting complete
236.1 10 Ltr (full flush ) capacity white 34 each 1178.80 40079.20
236.2 10 Ltr (full flush ) capacity coloured 34 each 1665.45 56625.30
237 Dismantling, Providing and fixing solid plastic seat with lid for pedestal
type WC pan complete
237.1 white solid plastic seat with lid 34 each 334.95 11388.30
237.2 black solid plastic seat with lid 34 each 305.90 10400.60
238 Extra for Dismantling, Providing coloured other than black solid PVC 34 Each 121.95 4146.30
plastic seat and cover in european type WC pan instead of white
plastic seat and cover
239 Dismantling, Providing and fixing GI inlet connection for flush pipe 34 each 73.60 2502.40
connecting with WC pan
240 Dismantling, Providing and fixing white vitreous china flat back or wall 34 each 573.67 19504.85 Cement / Steel will be issued free of
corner type lipped front urinal basin of 430x260x350mm and cost from BHEL Stores
340x410x265mm sizes respectively.
241 Dismantling, Providing and fixing white vitreous china squatting plate 34 each 1059.09 36009.20 Cement / Steel will be issued free of
urinal with integral rim longitudinal flush pipe cost from BHEL Stores
242 Dismantling, Providing and fixing white vitreous china wash basin
including making all connectons but excluding the cost of fiting

242.1 Flat back wash basin of size 630x450mm 34 each 745.08 25332.82 Cement / Steel will be issued free of
cost from BHEL Stores
242.2 Flat back wash basin of size 550x400mm 34 each 588.28 20001.62 Cement / Steel will be issued free of
cost from BHEL Stores
242.3 Angle back wash basin of size 600x480mm 34 each 692.83 23556.32 Cement / Steel will be issued free of
cost from BHEL Stores
242.4 Angle back wash basin of size 400x400mm 34 each 468.63 15933.52 Cement / Steel will be issued free of
cost from BHEL Stores
242.5 Flat back wash basin of size 450x300mm 34 each 483.73 16446.92 Cement / Steel will be issued free of
cost from BHEL Stores
242.6 Surgeon type wash basin of size 660x460mm 34 each 1006.43 34218.72 Cement / Steel will be issued free of
cost from BHEL Stores
243 Dismantling, Providing and fixing kitchen sink including making all
connections excluding cost of fittings
243.1 White glazed fire clay sink of size 600x450x250mm 34 each 1436.08 48826.82 Cement / Steel will be issued free of
cost from BHEL Stores
244 Dismantling, Providing and fixing white vitreous china laboratory sink
including making all connections excluding excluding cost of fittings

244.1 Size 450x300x150mm 34 each 822.83 27976.32 Cement / Steel will be issued free of
cost from BHEL Stores
244.2 Size 600x450x200mm 34 each 1677.68 57041.22 Cement / Steel will be issued free of
cost from BHEL Stores
245 Dismantling, Providing and fixing PVC waste pipe for sink or wash
basin including PVC waste fitting complete
245.1 semi rigid pipe
245.1.1 32mm dia 34 each 42.15 1433.10
245.1.2 40mm dia 34 each 47.95 1630.30
245.2 Nil
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

245.3 Nil
245.4 Flexible pipe
245.4.1 32mm dia 34 each 46.80 1591.20
245.4.2 40mm dia 34 each 49.10 1669.40
246 Dismantling, Providing and fixing 100mm sand cast iron grating for 34 each 16.45 559.30
gully trap
247 Dismantling, Providing and fixing in position 25mm dia metre 34 each 28.85 980.90
mosquito proof coupling of approved municipal design
248 Dismantling, Providing and fixing 600x450mm beveled edge mirror of 34 each 493.65 16784.10
superior glass (of approved quality) complete with 6mm thick hard
board ground fixed to wooden cleats with CP brass screws and washers
complete

249 Dismantling, Providing and fixing mirror of superior glass (approved

quality) and of required shape and size with plastic moulded frame of
approved make and shade with 6 mm thick hard board backing

249.1 circular shape 450mm dia 34 each 599.15 20371.10

249.2 Rectangular shape 453x357mm 34 each 465.10 15813.40
249.3 oval shape 450x350mm (outer dimensions) 34 each 504.00 17136.00
249.4 Rectangular shape 1500x450mm 34 each 1034.50 35173.00
250 Dismantling, Providing and fixing 600x120x5mm glass shelf with edges 34 each 216.70 7367.80
round of supported on anodised aluminium angle frame with CP brass
brackets and guard rail complete fixed with 40mm long screws rawl
plugs etc. complete

251 Dismantling, Providing and fixing toilet paper holder

251.1 CP brass 34 each 147.10 5001.40
251.2 Vitreous china 34 each 173.00 5882.00
252 Dismantling, Providing and fixing soil waste and vent pipes
252.1 100mm dia
252.1.1 sand cast iron S&S pipe as per IS 1729 34 mtr 451.00 15334.00
252.1.2 Centrifugally cast (spun) iron socketed pipe as per IS 3989 34 mtr 730.40 24833.60
252.2 Nil
252.3 Nil
252.4 75mm diametre
252.5 sand cast iron S&S pipe as per IS 1729 34 mtr 395.45 13445.30
252.6 Centrifugally cast (spun) iron socketed pipe as per IS 3989 34 mtr 629.85 21414.90
253 Dismantling, Providing and filling the joints with spun yarn cement
slurry and cement mortar 1:2(1 cement 2 fine sand) in SCI/CI pipes

253.1 75mm dia pipe 34 each 25.30 860.20

253.2 100mm dia pipe 34 each 29.80 1013.20
254 Dismantling, Providing and fixing MS holder bat clamps of approved
design to sand cast iron/cast iron(spun) pipe embedded in and
including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement
2 coarse sand 4 graded stone aggregate 20mm nominal size) including
cost of cutting holes and making good the walls etc.

254.1 for 100mm dia pipe 34 each 62.71 2132.17 Cement / Steel will be issued free of
cost from BHEL Stores
254.2 for 75mm dia pipe 34 each 60.36 2052.27 Cement / Steel will be issued free of
cost from BHEL Stores
255 Dismantling, Providing and fixing bend of required degree with access
door insertion rubber washer 3mm thick bolt and nuts complete

255.1 100mm
255.2 sand cast iron S&S pipe as per IS 1729 34 each 255.00 8670.00
255.3 sand cast iron S&S pipe as per IS 3989 34 each 291.00 9894.00
255.4 75mm diametre
255.4.1 sand cast iron S&S pipe as per IS 1729 34 each 210.00 7140.00
255.4.2 sand cast iron S&S pipe as per IS 3989 34 each 230.90 7850.60
256 Dismantling, Providing and fixing plain bend of required degree
256.1 100mm
256.1.1 sand cast iron S&S pipe as per IS 1729 34 each 222.45 7563.30
256.1.2 sand cast iron S&S pipe as per IS 3989 34 each 236.40 8037.60
256.2 Nil
256.3 Nil
256.4 75mm diametre
256.5 sand cast iron S&S pipe as per IS 1729 34 each 175.15 5955.10
256.6 sand cast iron S&S pipe as per IS 3989 34 each 178.65 6074.10
257 Dismantling, Providing and fixing heel rest sanitary bend
257.1 100mm
257.2 sand cast iron S&S pipe as per IS 1729 34 each 244.50 8313.00
257.3 sand cast iron S&S pipe as per IS 3989 34 each 286.35 9735.90
257.4 75mm diametre
257.5 sand cast iron S&S pipe as per IS 1729 34 each 204.20 6942.80
257.6 sand cast iron S&S pipe as per IS 3989 34 each 249.50 8483.00
258 Dismantling, Providing and fixing double equal junction of required
degree with aceess door insertion rubber washer 3 mm thick bolts and
nuts complete
258.1 100x100x100x100mm
258.2 sand cast iron S&S aa per IS 1729 34 each 513.85 17470.90
258.3 sand cast iron S&S as per IS 3989 34 each 612.55 20826.70

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

258.4 75x75x75mm
258.4.1 sand cast iron S&S aa per IS 1729 34 each 409.75 13931.50
258.4.2 sand cast iron S&S as per IS 3989 34 each 487.60 16578.40
259 Dismantling, Providing and fixing double equal plain junction of
required degree
259.1 100x100x100x100mm
259.1.1 sand cast iron S&S aa per IS 1729 34 each 473.35 16093.90
259.1.2 sand cast iron S&S as per IS 3989 34 each 558.15 18977.10
259.2 Nil
259.3 Nil
259.4 75x75x75mm
259.5 sand cast iron S&S aa per IS 1729 34 each 356.35 12115.90
259.6 sand cast iron S&S as per IS 3989 34 each 445.75 15155.50
260 Dismantling, Providing and fixing single equal plain junction of
required degree with access door insertion rubber washer 3 mm thick
bolts and nuts complete
260.1 100x100x100x100mm
260.2 sand cast iron S&S aa per IS 1729 34 each 374.60 12736.40
260.3 sand cast iron S&S as per IS 3989 34 each 489.60 16646.40
260.4 75x75x75mm
260.4.1 sand cast iron S&S aa per IS 1729 34 each 283.15 9627.10
260.4.2 sand cast iron S&S as per IS 3989 34 each 364.45 12391.30
260.5 Nil
260.6 Nil
260.7 Dismantling, Providing and fixing single equal plain junction of
required degree
260.8 100x100x100mm
260.8.1 sand cast iron S&S aa per IS 1729 34 each 323.50 10999.00
260.8.2 sand cast iron S&S as per IS 3989 34 each 442.00 15028.00
260.9 Nil
260.1 Nil
260.11 75x75x75mm
260.12 sand cast iron S&S aa per IS 1729 34 each 250.65 8522.10
260.13 sand cast iron S&S as per IS 3989 34 each 333.10 11325.40
261 Dismantling, Providing and fixing double unequal junction of required
degree with access door insertion rubber washer 3mm thick bolts and
nut complete
261.1 100x100x75x75mm
261.1.1 sand cast iron S&S aa per IS 1729 34 each 555.80 18897.20
261.1.2 sand cast iron S&S as per IS 3989 34 each 842.70 28651.80
261.2
261.3
261.4 Dismantling, Providing and fixing double enequal plain junction of
required degree
261.4.1 100x100x75x75mm
261.4.1.1 sand cast iron S&S aa per IS 1729 34 each 507.00 17238.00
261.4.1.2 sand cast iron S&S as per IS 3989 34 each 757.90 25768.60
262 Dismantling, Providing and fixing single unequal junction of required
degree with access door insertion rubber washer 3mm thick bolts and
nut complete
262.1 100x100x75mm
262.1.1 sand cast iron S&S aa per IS 1729 34 each 402.50 13685.00
262.1.2 sand cast iron S&S as per IS 3989 34 each 637.10 21661.40
263 Dismantling, Providing and fixing single unequal junction of required
degree
263.1 100x100x75mm
263.1.1 sand cast iron S&S aa per IS 1729 34 each 350.20 11906.80
263.1.2 sand cast iron S&S as per IS 3989 34 each 551.15 18739.10
264 Dismantling, Providing and fixing double equal plain invert branch of
required degree
264.1 100x100x100x100mm
264.1.1 sand cast iron S&S aa per IS 1729 34 each 505.85 17198.90
264.1.2 sand cast iron S&S as per IS 3989 34 each 496.55 16882.70
264.2 Nil
264.3 Nil
264.4 75x75x75x75mm
264.4.1 sand cast iron S&S aa per IS 1729 34 each 377.25 12826.50
264.4.2 sand cast iron S&S as per IS 3989 34 each 400.50 13617.00
265 Dismantling, Providing and fixing single equal plain invert branch of
required degree
265.1 100x100x100mm
265.1.1 sand cast iron S&S aa per IS 1729 34 each 388.55 13210.70
265.1.2 sand cast iron S&S as per IS 3989 34 each 393.20 13368.80
265.2 Nil
265.3 Nil
265.4 75x75x75mm
265.4.1 sand cast iron S&S aa per IS 1729 34 each 290.15 9865.10
265.4.2 sand cast iron S&S as per IS 3989 34 each 299.45 10181.30
266 Dismantling, Providing and fixing double unequal invert branch of
required degree
266.1 100x100x75x75mm
266.2 sand cast iron S&S aa per IS 1729 34 each 547.70 18621.80
266.3 sand cast iron S&S as per IS 3989 34 each 682.40 23201.60
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

267 Dismantling, Providing and fixing single unequal plain invert branch of
required degree
267.1 100x100x75mm
267.2 sand cast iron S&S aa per IS 1729 34 each 459.40 15619.60
267.3 sand cast iron S&S as per IS 3989 34 each 505.85 17198.90
268 Dismantling, Providing and fixing sand cast iron and S&S off sets as
per IS 1729
268.1 76mm off sets
268.1.1 with 75mm dia pipe 34 each 158.90 5402.60
268.1.2 with 100mm dia pipe 34 each 268.05 9113.70
268.2 Nil
268.3 Nil
268.4 114mm off sets
268.4.1 with 75mm dia pipe 34 each 271.25 9222.50
268.4.2 with 100mm dia pipe 34 each 351.40 11947.60
268.5 Nil
268.6 Nil
268.7 152mm off sets
268.7.1 with 75mm dia pipe 34 each 340.25 11568.50
268.7.2 with 100mm dia pipe 34 each 440.15 14965.10
269 Dismantling, Providing and fixing sand cast iron S&S off sets as per IS
3989
269.1 75mm off sets
269.1.1 with 75mm dia pipe 34 each 220.45 7495.30
269.3 150mm off sets
269.3.1 with 75mm dia pipe 34 each 277.75 9443.50
269.3.2 with 100mm dia pipe 34 each 374.15 12721.10
270 Dismantling, Providing and fixing door piece insertion rubber washer
3mm thick bolts and nuts complete
270.1 100mm
270.1.1 sand cast iron S&S pipe as per IS 1729 34 each 367.65 12500.10
270.1.2 sand cast iron S&S pipe as per IS 3989 34 each 296.80 10091.20
270.2 Nil
270.3 Nil
270.4 75mm
270.4.1 sand cast iron S&S pipe as per IS 1729 34 each 268.05 9113.70
270.4.2 sand cast iron S&S pipe as per IS 3989 34 each 227.40 7731.60
271 Dismantling, Providing and fixing terminal guard
271.1 100mm
271.1.1 sand cast iron S&S pipe as per IS 1729 34 each 192.25 6536.50
271.1.2 sand cast iron S&S pipe as per IS 3989 34 each 194.60 6616.40
271.2 Nil
271.3 Nil
271.4 75mm
271.4.1 sand cast iron S&S pipe as per IS 1729 34 each 139.15 4731.10
271.4.2 sand cast iron S&S pipe as per IS 3989 34 each 177.45 6033.30
272 Dismantling, Providing and fixing collar
272.1 100mm
272.1.1 sand cast iron S&S pipe as per IS 1729 34 each 143.45 4877.30
272.1.2 sand cast iron S&S pipe as per IS 3989 34 each 202.70 6891.80
272.2 Nil
272.3 Nil
272.4 75mm
272.5 sand cast iron S&S pipe as per IS 1729 34 each 107.80 3665.20
272.6 sand cast iron S&S pipe as per IS 3989 34 each 146.10 4967.40
273 Dismantling, Providing lead caulked joints to sand cast iron rain
centrifugally cast (spun) iron pipes and fitting of diametre
273.1 100mm 34 each 126.50 4301.00
273.2 75mm 34 each 107.80 3665.20
273.3 50mm 34 each 86.60 2944.40
274 Dismantling, Providing and fixing MS stays and clamps for sand cast
iron / centrifugally cast (spun) iron pipes of diameter
274.1 100mm 34 each 45.61 1550.77 Cement / Steel will be issued free of
cost from BHEL Stores
274.2 75mm 34 each 38.91 1322.97 Cement / Steel will be issued free of
cost from BHEL Stores
274.3 50mm 34 each 31.61 1074.77 Cement / Steel will be issued free of
cost from BHEL Stores
275 Dismantling, Providing and fixing trap of self cleansing design with
screws down or hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and floors

275.1 100mm inlet and 100mm outlet

275.1.1 sand cast iron S&S as per IS 3989 34 each 531.11 18057.57 Cement / Steel will be issued free of
cost from BHEL Stores
275.1.2 sand cast iron S&S pipe as per IS 1729 34 each 428.91 14582.77 Cement / Steel will be issued free of
cost from BHEL Stores
275.2 Nil
275.3 Nil
275.4 Distempering with 1st quality acrylic washable distemper (ready mixed)
of approved manufacture and of required shade and colour complete as
per manufacturer specification
275.4.1 sand cast iron S&S as per IS 3989 34 each 573.35 19493.90
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

275.4.2 sand cast iron S&S pipe as per IS 1729 34 each 375.90 12780.60
276 cutting chases in brick masonry walls for following diametre sand cast
iron/ centrifugally cast (spun) iron pipes and making good the same
with cement concrete 1:3:6(1 cement 3 coarse sand 6 grade stone
aggregate 12.5 mm nominal size) including necessary plaster and
painting in cement mortar 1:4( 1 cement 4 coarse sand )

276.1 100mm 34 mtr 123.95 4214.26 Cement / Steel will be issued free of
cost from BHEL Stores
276.2 75mm 34 mtr 89.32 3036.93 Cement / Steel will be issued free of
cost from BHEL Stores
276.3 50mm 34 mtr 58.53 1990.02 Cement / Steel will be issued free of
cost from BHEL Stores
277 painting CI cistern with bitumastic or any other anti corrosive paint 34 each 212.30 7218.20
inside and white paint over a coat of zinc chromate yellow primer (of
approved quality) on the outside surface of the cisterm flush pipe other
fitting etc. complete for new work

278 Re-painting CI cistern with bitumastic or any other anti corrosive paint 34 each 146.25 4972.50
inside and white paint on the outside surface of the cistern flush pipe
other fitting etc. complete including polishing of wooden seat and lid
and cleaning of WC pan with acid wherever necessary

279 Repainting CI cistern with synthetic enamel paint of approved colour 34 each 65.75 2235.50
brand and manufacture on the outside surface fo cistern flush pipe
other fitting etc. complete
280 painting sand cast iron / centrifugally cast (spun) iron soil waste vent
pipes and fitting with paint of any colour such as chocolate grey or buff
etc, over a coat of primer(of approved quality) for new work

280.1 100mm dia meter pipes 34 mtr 18.60 632.40

280.2 75mm dia metre pipe 34 mtr 14.25 484.50
281 Repainting sand cast iron / centrifugally cast iron (spun) iron soil
waste vent pipes and fitting with paint of any colour such as chocolate
grey or buff etc.
281.1 100mm dia meter pipes 34 mtr 9.30 316.20
281.2 75mm dia metre pipe 34 mtr 7.00 238.00
282 Repainting bath tub of size 1700x730x430mm with enamel paint 34 each 208.45 7087.30
283 Dismantling, Providing and fixing vitreous china dual purpose closet
suitable for use as squatting pan or european type water closet (angle
indian WC pan ) with seat lid with CP brass hinges and rubbers
buffers 10ltr low level flushing cistern with fitting and brackets 40mm
flush bend 20mm over flow pipe with specials of standard make and
mosquito proof coupling of approved municippal design complete,
including painting of fitting and brackets cutting and making good the
walls and floors wherever required

283.1 white vitreous china dual purpose WC pan with white solid plastic seat 34 each 4142.20 140834.80
and lid with white vitreous china flushing cistern and CP flush bend

284 Dismantling, Providing and fiixing PTMT waste coupling for wash basin
and sink of approved quality and colour
284.1 waste coupling 31mm of 79mm length and 62mm breadth weighing 34 each 75.80 2577.20
not less than 45 grms
284.2 waste coupling 38mm of 83mm length and 77mm breadth weighing 34 each 100.20 3406.80
not less than 60grms
285 Dismantling, Providing and fixing PTMT bottle trap for wash basin and
sink
285.1 Bottle trap 31mm single piece moulded with height of 270mm effective 34 each 366.20 12450.80
length of tail pipe 260mm from the centre of the waste coupling 77mm
breadth with 25mm minimum water seal weighinng not less than 260
grms

285.2 Bottle trap 38mm single piece moulded with height of 270mm effective 34 each 395.25 13438.50
length of tail pipe 260mm from the centre of the waste coupling 77mm
breadth with 25mm minimum water seal weighinng not less than 263
grms

286 Dismantling, Providing and fixing PTMT liquid soap container 109mm 34 each 164.65 5598.10
wide 125mm high and 112mm distance from wall of standard shape
with bracket of the same material with snap fitting of approved quality
and colour weighing not less than 105grms

287 Dismantling, Providing and fixing PTMT towel ring trapezoidal shape 34 each 149.00 5066.00
215mm long 200mm wide with a minimum distances of 37mm from
wall face with concealed fitting arrangement of approved quality and
colour weighing not less than 88 grms

288 Dismantling, Providing and fixing PTMT towel rail complete with
brackets fixed to wooden cleats with CP brass screws with concealed
fitting arrangement of approved quality and colour
288.1 450mm long towel rail with total length of 495mm 78mm wide and 34 each 294.65 10018.10
effective height of 88mm weighing not less than 170grms
288.2 600mm long towel rail with total length of 645mm width 78mm and 34 each 329.50 11203.00
effective height of 88mm weighing not less than 190grms

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

289 Dismantling, Providing and fixing PTMT shelf 440mm long 124mm 34 each 370.15 12585.10
width and 36 mm height of approved quality and colour weighinng not
less than 300 grams
290 Dismantling, Providing and fixing PTMT 15mm urinal spreader size 34 each 147.25 5006.50
95x69x100mm with 1/2" BSP thread and shapes weighing hot less
than 60 grms
291 Dismantling, Providing and fixing PTMT urinal cock of approved quality
and colour
291.1 15mm nominal bore 80mm long 42mm high and 30mm wide with BSP 34 each 113.90 3872.60
female threads weighing not less than 48grm
292 Dismantling, Providing and fixing MS holder bat clamp of approved
design to sand cast iron cast iron (spun) pipes comprising of MS flat
brackets made of 50x5mm flat of specified shape projecting 75mm
outside the wall surface and fixed on wall with 4nos 6mm dia
expansion hold fasteners including drilling neccessary holes in brick
wall CC/RCC surface and the cost of bolts etc. the pipe shall be fixed
to the already fixed brackets with the help of 30mm x 1.6mm
galvanised MS flats of specified shape and of total length 420mm and
shall be fixed with MS nuts bolts and washers of size of size 25x6mm ,
one bolts on each side of the pipe

292.1 total bracket length 580mm of approved shape and design (for single 34 each 121.70 4137.80
100mm dia pipe)
292.2 total bracket length 810mm of approved shape and design (for two 34 each 148.05 5033.70
100mm dia pipes)
292.3 total bracket length 1040mm of approved shape and design (for three 34 each 174.35 5927.90
100mm dia pipes)
293 Dismantling the spoiled AC specials and replacing with approved 34 Each 168.29 5721.86
quality new ones in CM 1:1 including chasing brick masonry /
concrete, making good in CM including cost of all materials etc
complete for all specials for 100 mm (4") dia all as directed by Engineer-
in-charge.

294 Dismantling the spoiled AC specials and replacing with approved 34 Each 153.66 5224.44
quality new ones in CM 1:1 including chasing brick masonry /
concrete, making good in CM including cost of all materials etc
complete for all specials for 75 mm (3") dia all as directed by Engineer-
in-charge. ( Nahany trap and PVC Pipe if replaced will be measured
separaately)

295 Rectifying the dampness due to leaking joints of Nahany traps alkathin 34 Each 177.55 6036.70
/ lead pipe connections to W.C's joints in AC pipes embedded in
flooring including chasing brick work / concrete and making good
after repairs in cement mortar including cost of all materials, curing
etc complete for all specials all as directed by Engineer-in-charge.( trap
and PVC Pipe if replaced will be measured separaately)

296 Dismantling and replacing with new ones of approved make including Admn.
chasing of brick work / concrete, making good in CM cost of all approval2
materials, curing for the following items etc complete all as directed by 010-11
Engineer-in-charge.

297 Wash hand basins of size 22"x16" (without fittings) ( Material will be 34 Each 0.00
free issue by BHEL)
298 Wash hand basins of size 18"x12" (without fittings). 34 Each 0.00
299 Indian water closet 630 mm / 580 mm ( Material will be free issue by 34 Each 0.00
BHEL)
300 fixing European Water closets complete all as directed by Engineer-in- 34 Each 0.00
charge. ( Material will be free issue by BHEL)
301 Standing type white glazed flat back urinals. 34 Each 0.00
302 Porcelain 'P' trap of size 4" 34 Each 0.00
303 Orissa Pan of approved make and size 580 x 440 mm ( Material will be 34 Each 0.00
free issue by BHEL)
304 SWG gully traps 6"x6" or 4"x4" with CI frame and cover. 34 Each 0.00
305 Fixing of white coloured PVC low level flushing cistern 10 lit capacity 34 Each 0.00 Flush Tanks will be issued free of
supplied from BHEL stores complete all as directed by Engineer-in- cost from BHEL stores
charge.
306 Fixing of coloured PVC low level flushing cistern 10 lit capacity 34 Each 0.00 Flush Tanks will be issued free of
supplied from BHEL stores complete all as directed by Engineer-in- cost from BHEL stores
charge.
307 Polished shahabad stone sinks of 1/2" tick, 24" x 18" x 7" including 34 Each 0.00
proper fixing (without fittings).
308 Dismantling and replacing with new ones of approved make including
cost of all materials etc complete all as directed by Engineer-in-charge.

308.1 1/2" C.P. pillar taps (500 gms) SEIKO DELUX HEAVY DUTY. 34 Each 0.00
308.2 1/2" brass stop cock (400 gms) 34 Each 0.00
308.3 3/4" brass stop cock. 34 Each 0.00
308.4 1/2" X 18" PVC pipe connections. (Heavy duty). 34 Each 0.00
308.5 PVC flexible pipe 32 mm dia. 34 Each 0.00
308.6 3/4" polymer ball cock of ISI makes approved brand. 34 Each 0.00
308.7 1/2" polymer ball cock of ISI makes approved brand. 34 Each 0.00
308.8 E.W.C seat covers (solid) of any shade. 34 Each 0.00
308.9 CP consealed stock cock 1/2" dia with internal brass threadings. 34 Each 0.00

308.1 Hot and cold mixing vlave of SEIKO DELUX make. 34 Each 0.00
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

308.11 C.P. waste coupling 1 1/4" dia (32 mm). 34 Each 0.00
308.12 C.P. Nahani trap jalise 5" dia. 34 Each 0.00
308.13 Hot water connections. 34 Each 0.00
308.14 C.I. brackets. 34 Each 0.00
308.15 Porcelain foot rests 250 x 125 x 25 mm 34 Each 0.00
308.16 1/2" C.I bib taps with brass internal, turning (Alto brand or 34 Each 0.00
equivalent).
308.17 1/2" Polymet bib taps (PTMT material) prayag make. 34 Each 0.00
308.18 PVC shower swing type for the 1/2" 3/4" pipe (Prayag make). 34 Each 0.00
308.19 1/2" C.I. stop cock with brass internal turnings (Alto or equivalent 34 Each 0.00
brand).
308.2 PVC syphon set suitable for PVC/CI law down flush tank of 10 litres 34 Each 0.00
capacity with all fittings etc.
309 Supplying and fixing of PVC balls ISI marked for ball cocks in over 34 Each 0.00
head tanks and flush tanks for 20 mm dia.etc. complete all as directed
by Engineer-in-charge.
310 Supplying and fixing CI Nahany trap 76 mm (3") dia in cement 34 Each 0.00
concrete 1:2:4 and 12.7 mm (5") dia CI grating hinged to Nahany trap
including breaking of the flooring and redoing the same wherever
necessary etc complete all as directed by Engineer-in-charge.

311 Removing and refixing GI pipe 13 to 40 mm dia including cost of 34 One Rmt 0.00
jointing materials such as specials like collars, elbows, bends etc
complete all as directed by Engineer-in-charge.
312 Supplying and fixing Telephonic shower including cost of all materials 34 Each 0.00
and fixtures and fittings etc complete all as directed by Engineer-in-
charge.
313 Providing PVC storage tank covers located over the buildings to suit 34 Each 0.00
existing PVC storage tanks with nut and bolts etc complete all as
directed by Engineer-in-charge.
314 Dismantling of the existing AC/PVC Pipe (old pipes are to be handed 34 Rmt 0.00
over to department as per instructions of the Engineer-in-charge) and
supplying & fixing of 75 mm dia Prince/ Sudhakar make or
equivalent quality as approved by Engineer-in-charge of PVC / SWR
pipes (as per ISI standards) 4 kgs/ cm². etc complete all as directed by
Engineer-in-charge.

315 Dismantling of the existing AC /PVC Pipes (the pipes are to be 34 Rmt 0.00
returned to department as per instructions of the Engineer-in-charge)
and Supply & Fixing Prince / Sudhakar make or equivalent
approved quality PVC / SWR pipes (as per ISI standards) 4 kg /
cm²…110 mm dia etc complete all as directed by Engineer-in-charge.

316 Dismantling of the existing specials and Supplying & Fixing Prince /
Sudhakar make or equivalent approved quality (U.V. resistant UPVC)
SWR pipe fittings (as per ISI standards) etc complete all as directed by
Engineer-in-charge.

316.1 75 mm dia plain bend. 34 Each 0.00

316.2 75 mm dia plug bend. 34 Each 0.00
316.3 75 mm dia off-set. 34 Each 0.00
316.4 75 mm dia Single 'Y' with door. 34 Each 0.00
316.5 75 mm dia pipe clip. 34 Each 0.00
316.6 75 mm dia single tee with door. 34 Each 0.00
316.7 110 mm dia plain bend. 34 Each 0.00
316.8 110 mm dia plug bend. 34 Each 0.00
316.9 110 mm dia Single 'Y' with door. 34 Each 0.00
316.1 110 mm dia Double 'Y' with door. 34 Each 0.00
316.11 110 mm dia off-set. 34 Each 0.00
316.12 110 mm dia vent cowl. 34 Each 0.00
316.13 110 mm dia pipe clip. 34 Each 0.00
316.14 110 mm dia single tee with door. 34 Each 0.00
316.15 110 mm dia coupler. 34 Each 0.00

WATER SUPPLY WORKS

317 Providing and fixing Polyethene -Aluminium-Polythelene(PE-AL-PE)

Complete Pressure Pipe confroming to IS -15450 U.V.stabilized for hot
&cold water supply,capable to withstand tempreture up to 80
Cincluding all special fittings of composite metrial (engineering plastic
bland and brass inserts wherever required) e.g.elbows,tees,reducers,
couplers &connectors etc.with clamp at 1.00metre speacing. this
includes testing of joint complete as per directon of the Engineer in
charge

Internal work-Exposed on wall

317.1 1216(16mm OD) pipe 34 metre 146.65 4986.10
317.2 1620 (20 mm OD) pipe 34 metre 176.45 5999.30
317.3 2025 (25 mm OD) pipe 34 metre 222.85 7576.90
317.4 2532 (32 mm OD) pipe 34 metre 297.50 10115.00
317.5 3240 (40 mm OD) pipe 34 metre 391.30 13304.20
317.6 4050 (50 mm OD) pipe 34 metre 507.60 17258.40

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

318 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE)

Composite Pressure Pipes conforming to IS - 15450 U.V.stabilized with
carbon black having thermal stability for hot & cold
water supply, capable to withstand temperature up to 80 C
includingall special fittings of composite material (engineering plastic
blendand brass inserts wherever required) e.g. elbows, tees,
reducers,couplers & connectors etc. with clamps at 1.00 metre
spacing. Thisincludes the costs of cutting chases and including testing
of jointscomplete as per direction of the engineer in charge.

Comcealed work including cutting chases and making good the wall
etc.
318.1 1216 (16mm OD )Pipe 34 metre 219.61 7466.58 Cement / Steel will be issued free of
cost from BHEL Stores
318.2 1620 (20 mm OD) pipe 34 metre 256.21 8710.98 Cement / Steel will be issued free of
cost from BHEL Stores
318.3 2025(25mm OD) Pipe 34 metre 315.16 10715.28 Cement / Steel will be issued free of
cost from BHEL Stores
318.4 2532(32mm OD) Pipe 34 metre 408.66 13894.28 Cement / Steel will be issued free of
cost from BHEL Stores
319 Providing and fixing Polyethene -Aluminium-Polythelene(PE-AL-PE)
Complete Pressure Pipe confroming to IS -15450 U.V.stabilized with
carbon black having thermal stablity for hot and cold water supply
capable to withstand temperature upto 80oc including all special fitting
of composite material (engineering plastic blend and brass inserts
wherever required ) e.g elbows tees reducers couplers and connectors
etc, with trenching refilling and testing of joints complete as per
direction of the engineer in charge

External work
319.1 1216(16mm OD) pipe 34 mtr 143.95 4894.30
319.2 1620 (20 mm OD) pipe 34 mtr 171.10 5817.40
319.3 2025 (25 mm OD) pipe 34 mtr 214.90 7306.60
319.4 2532 (32 mm OD) pipe 34 mtr 284.35 9667.90
319.5 3240 (40 mm OD) pipe 34 mtr 371.50 12631.00
319.6 4050 (50 mm OD) pipe 34 mtr 487.75 16583.50
320 providing and fixing 3 layer PP-R(poly propylene Random copolymer )
pipes SDR 7.4 U V stabilized and anti - microbial fusion welded having
thermal stablity for hot and cold water supply including all PP-R plain
and brass threaded polypropylene random fitting i/c fixing the pipe
with clamps at 1.00 m spacing. this including testing of joints
complete as per direction of engineer in charge

Internal work-Exposed on wall

320.1 PP--16 pipe, 16mm OD 34 mtr 71.15 2419.10
320.2 PP--16 pipe, 20mm OD 34 mtr 96.40 3277.60
320.3 PP--16 pipe, 25mm OD 34 mtr 135.30 4600.20
320.4 PP--16 pipe, 32mm OD 34 mtr 205.40 6983.60
320.5 PP--16 pipe, 40mm OD 34 mtr 314.30 10686.20
320.6 PP--16 pipe, 50mm OD 34 mtr 436.60 14844.40
321 providing and fixing 3 layer PP-R(poly propylene Random copolymer )
pipes SDR 7.4 U V stabilized and anti - microbial fusion welded having
thermal stablity for hot and cold water supply including all PP-R plain
and brass threaded polypropylene random fitting i/c fixing the pipe
with clamps at 1.00 m spacing. this including testing of joints
complete as per direction of engineer in charge Concealed work
including cutting chases and making good the walls etc.

321.1 PP--16 pipe, 16mm OD 34 mtr 118.01 4012.18 Cement / Steel will be issued free of
cost from BHEL Stores
321.2 PP--16 pipe, 20mm OD 34 mtr 148.46 5047.48 Cement / Steel will be issued free of
cost from BHEL Stores
321.3 PP--16 pipe, 25mm OD 34 mtr 197.26 6706.68 Cement / Steel will be issued free of
cost from BHEL Stores
321.4 PP--16 pipe, 32mm OD 34 mtr 284.66 9678.28 Cement / Steel will be issued free of
cost from BHEL Stores
322 Providing and fixing 3 layer PP-R(poly propylene Random copolymer )
pipes UV stablized and anti - microbial fusion welded having thermal
stablitily for hot and cold water supply including all PP-R plain and
brass threaded polypropylene random fitting including trenching
refilling and testing of joints complete as per direction of engineer in
charge

322.1 PN - 16 pipe, 16mm OD (SDR-7.4) 34 mtr 68.45 2327.30

322.2 PN - 16 pipe, 20mm OD (SDR-7.4) 34 mtr 91.10 3097.40
322.3 PN - 16 pipe, 25mm OD (SDR-7.4) 34 mtr 129.45 4401.30
322.4 PN - 16 pipe, 32mm OD (SDR-7.4) 34 mtr 194.40 6609.60
322.5 PN - 16 pipe, 40mm OD (SDR-7.4) 34 mtr 294.50 10013.00
322.6 PN - 16 pipe, 50mm OD (SDR-7.4) 34 mtr 416.80 14171.20
322.7 PN - 16 pipe, 63mm OD (SDR-7.4) 34 mtr 639.50 21743.00
322.8 PN - 16 pipe, 75mm OD (SDR-7.4) 34 mtr 903.70 30725.80
322.9 PN - 16 pipe, 90mm OD (SDR-7.4) 34 mtr 1431.50 48671.00
322.1 PN - 10 pipe, 110mm OD (SDR-11) 34 mtr 1499.45 50981.30
322.11 PN - 10 pipe, 160mm OD (SDR-11) 34 mtr 3134.30 106566.20
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

C.P.V.C Pipes
323 Providing and fixing chlorinted polyvinyl chloride (CVCV) pipes , having
thermal stability for hot and cold water supply including all CPVC
plain and brass threaded fitting including of pipes with clamps at
1.00m spacing. This including jointing of pipes and fitting with one
step CPVC solvent cement and testing of joints completes as per
direction of engineer in charge

Internal work-Exposed on wall

323.1 15mm nominal outer dia. Pipes 34 mtr 97.95 3330.30
323.2 20mm nominal outer dia. Pipes 34 mtr 115.65 3932.10
323.3 25mm nominal outer dia. Pipes 34 mtr 150.40 5113.60
323.4 32mm nominal outer dia. Pipes 34 mtr 196.35 6675.90
323.5 40mm nominal outer dia. Pipes 34 mtr 275.05 9351.70
323.6 50mm nominal outer dia. Pipes 34 mtr 418.50 14229.00
324 providing and fixing chlorinated polyvinyl chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain and brass threaded fitting i/c fixing the pipe with clamps at
1.00m spacing. This including jointing of pipes and fitting with one
step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of
engineer in charge

Concealed work including cutting chases and making good the walls
etc.
324.1 15mm nominal outer dia. Pipes 34 mtr 150.51 5117.18 Cement / Steel will be issued free of
cost from BHEL Stores
324.2 20mm nominal outer dia. Pipes 34 mtr 170.86 5809.08 Cement / Steel will be issued free of
cost from BHEL Stores
324.3 25mm nominal outer dia. Pipes 34 mtr 217.61 7398.58 Cement / Steel will be issued free of
cost from BHEL Stores
324.4 32mm nominal outer dia. Pipes 34 mtr 272.46 9263.48 Cement / Steel will be issued free of
cost from BHEL Stores
325 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain and brass threaded fitting this including jointing of pipes and
fitting with one step CPVC solvent cement trenching refilling and
testing of joints complete as per direction of engineer in charge.

325.1 15mm nominal outer dia. Pipes 34 mtr 92.60 3148.40

325.2 20mm nominal outer dia. Pipes 34 107.70 3661.80
325.3 25mm nominal outer dia. Pipes 34 144.55 4914.70
325.4 32mm nominal outer dia. Pipes 34 185.30 6300.20
325.5 40mm nominal outer dia. Pipes 34 255.25 8678.50
325.6 50mm nominal outer dia. Pipes 34 398.65 13554.10
325.7 62.50mm nominal outer dia. Pipes 34 1217.80 41405.20
325.8 75mm nominal outer dia. Pipes 34 1590.75 54085.50
325.9 100mm nominal outer dia. Pipes 34 2206.10 75007.40
325.1 150mm nominal outer dia. Pipes 34 3831.90 130284.60
326 Providing and fixing GI pipes complete with GI fitting and clamps
including cutting and making good the walls etc. Internal work-
Exposed on wall
326.1 15mm nominal bore 34 mtr 79.46 2701.64 Cement / Steel will be issued free of
cost from BHEL Stores
326.2 20mm nominal bore 34 mtr 102.18 3474.19 Cement / Steel will be issued free of
cost from BHEL Stores
326.3 25mm nominal bore 34 mtr 142.70 4851.94 Cement / Steel will be issued free of
cost from BHEL Stores
326.4 32mm nominal bore 34 mtr 186.52 6341.51 Cement / Steel will be issued free of
cost from BHEL Stores
326.5 40mm nominal bore 34 mtr 221.83 7542.08 Cement / Steel will be issued free of
cost from BHEL Stores
326.6 50mm nominal bore 34 mtr 300.68 10222.98 Cement / Steel will be issued free of
cost from BHEL Stores
327 Concealed pipe including painting with anti corrosive bitumstic paint
cutting chases and making good the wall
327.1 15mm dia nominal bore 34 mtr 144.75 4921.50
327.2 20mm dia nominal bore 34 mtr 170.60 5800.40
328 Providing and fixing GI pipe complete with GI fitting including
trenching and refilling etc. External work
328.1 15mm nominal bore 34 mtr 94.05 3197.70
328.2 20mm nominal bore 34 mtr 116.60 3964.40
328.3 25mm nominal bore 34 mtr 156.85 5332.90
328.4 32mm nominal bore 34 mtr 193.60 6582.40
328.5 40mm nominal bore 34 mtr 219.60 7466.40
328.6 50mm nominal bore 34 mtr 280.10 9523.40
328.7 65mm nominal bore 34 mtr 356.15 12109.10
328.8 80mm nominal bore 34 mtr 458.15 15577.10
329 Making connection of GI distribution branch with GI main of following
sizes by providing and fixing tee including cutting and threading the
pipe ect complete
329.1 25 to 40mm nominal bore 34 each 166.05 5645.70
329.2 50 to 80mm nominal bore 34 each 423.20 14388.80

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

330 Fixing water and stop cock in GI pipe line including cutting and 34 each 121.90 4144.60
threading the pipe and making long screws etc. complete (cost of water
meter and stop cock to be paid separately)
331 Providing and fixing brass bib cock of approved quality:
331.1 15 mmnominal bore 34 each 191.70 6517.80
331.2 20 mm nominal bore 34 each 235.20 7996.80
332 Providing and fixing brass stop cock of approved quality :
332.1 15 mmnominal bore 34 each 191.70 6517.80
332.2 20 mm nominal bore 34 each 235.20 7996.80
333 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end)
333.1 25 mm nominal bore 34 each 285.50 9707.00
333.2 32 mm nominal bore 34 each 358.00 12172.00
333.3 40 mm nominal bore 34 each 399.00 13566.00
333.4 50 mm nominal bore 34 each 578.20 19658.80
333.5 65 mm nominal bore 34 each 831.75 28279.50
333.6 80 mm nominal bore 34 each 1369.25 46554.50
334 Providingand fixing ball vaive (brass) of approved quality ,High or low
pressure ,with plastic floats complete :
334.1 15 mmnominal bore 34 each 228.35 7763.90
334.2 20 mm nominal bore 34 each 333.25 11330.50
334.3 25 mm nominal bore 34 each 385.90 13120.60
335 Providing and fixing gun metal non return of approved quality
(screwed end)
335.1 25 mm nominal bore
335.1.1 Horizontal 34 each 292.15 9933.10
335.1.2 vertical 34 each 317.70 10801.80
335.2 Nil
335.3 Nil
335.4 32 mm nominal bore
335.4.1 Horizontal 34 each 371.45 12629.30
335.4.2 vertical 34 each 464.40 15789.60
335.5 Nil
33.56 Nil
335.7 40 mm nominal bore
335.7.1 Horizontal 34 each 494.95 16828.30
335.7.2 vertical 34 each 605.30 20580.20
335.8 Nil
335.9 Nil
335.1 50 mm nominal bore
335.10.1 Horizontal 34 each 738.20 25098.80
335.10.2 vertical 34 each 847.40 28811.60
335.11 Nil
335.12 Nil
335.13 65 mm nominal bore
335.13.1 Horizontal 34 each 1282.10 43591.40
335.13.2 vertical 34 each 1467.95 49910.30
335.14 Nil
335.15 Nil
335.16 80 mm nominal bore
335.16.1 Horizontal 34 each 1812.25 61616.50
335.16.2 vertical 34 each 2390.70 81283.80
336 Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main
336.1 15 mmnominal bore 34 each 139.75 4751.50
336.2 20 mm nominal bore 34 each 187.20 6364.80
336.3 25 mm nominal bore 34 each 243.70 8285.80
337 Providing and fixing uplasticised PVC connection pipe with brass
unions
337.1 30 cm length
337.2 15 mmnominal bore 34 each 35.10 1193.40
337.3 20 mm nominal bore 34 each 43.25 1470.50
337.4 45 cm length
337.5 15 mmnominal bore 34 each 44.75 1521.50
337.6 20 mm nominal bore 34 each 56.35 1915.90
338 Providing and fixing CP brass shower rose with 15 or 20mm inlet
338.1 100 mm dia meter 34 each 40.40 1373.60
338.2 150 mm dia meter 34 each 55.80 1897.20
339 laying in position centrifugally cast spun iron S&S or flanged 34 quintal 55.55 1888.70
pipes(excluding cost of pipe)
340 Laying in position S&S or flanged CI special such as tees bends collars 34 quintal 100.25 3408.50
tapers and caps etc. (excluding cost fo specials)
341 Providing and laying S&S CI standard specials such as tees bends
collars tapers caps etc., (Heavy class)
341.1 Upto 300mm dia 34 quintal 2893.35 98373.90
341.2 over 300mm dia 34 quintal 3119.85 106074.90
343 Providing and laying flanged CI standard specials such as tees bends
collars tapers caps etc. suitable for flanges jointing as per IS 1538

343.1 Upto 300mm dia 34 quintal 5123.45 174197.30

343.2 over 300mm dia 34 quintal 5648.45 192047.30
344 Providing and laying S&S centrifuglly cast (spun) iron pipes (class LA)
conforming to IS 1536
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

344.1 100 mm dia pipe 34 mtr 737.15 25063.10

344.2 125 mm dia pipe 34 mtr 902.35 30679.90
344.3 150 mm dia pipe 34 mtr 1066.65 36266.10
344.4 200 mm dia pipe 34 mtr 1484.00 50456.00
344.5 250 mm dia pipe 34 mtr 2106.80 71631.20
344.6 300 mm dia pipe 34 mtr 2800.00 95200.00
344.7 350 mm dia pipe 34 mtr 3455.55 117488.70
344.8 400 mm dia pipe 34 mtr 4233.20 143928.80
344.9 450 mm dia pipe 34 mtr 5065.65 172232.10
344.1 500 mm dia pipe 34 mtr 6165.95 209642.30
344.11 600 mm dia pipe 34 mtr 8149.40 277079.60
345 Providing lead caulked joints to spun iron or CI pipes and specials
including testing of joints but excluding the cost of pig lead

345.1 100 mm diameter pipe 34 each 82.25 2796.50

345.2 125 mm diameter pipe 34 each 120.45 4095.30
345.3 150 mm diameter pipe 34 each 123.30 4192.20
345.4 200 mm diameter pipe 34 each 163.45 5557.30
345.5 250 mm diameter pipe 34 each 204.20 6942.80
345.6 300 mm diameter pipe 34 each 246.35 8375.90
345.7 350 mm diameter pipe 34 each 256.00 8704.00
345.8 400 mm dia meterpipe 34 each 332.10 11291.40
345.9 450 mm diameter pipe 34 each 371.60 12634.40
345.1 500 mm dia meterpipe 34 each 393.70 13385.80
345.11 600 mm diameter pipe 34 each 528.40 17965.60
346 Supplying pig lead at site of work 34 quintal 6742.20 229234.80
347 Providing flanged joints to double flanged CI / DI pipes and specials
including testing of joints
347.1 80 mm diameter pipe 34 each 65.60 2230.40
347.2 100 mm diameter pipe 34 each 113.00 3842.00
347.3 125 mm diameter pipe 34 each 114.15 3881.10
347.4 150 mm diameter pipe 34 each 156.90 5334.60
347.5 200 mm diameter pipe 34 each 162.70 5531.80
347.6 250 mm diameter pipe 34 each 236.75 8049.50
347.7 300 mm diameter pipe 34 each 246.05 8365.70
347.8 350 mm diameter pipe 34 each 335.05 11391.70
347.9 400 mm dia meterpipe 34 each 564.20 19182.80
347.1 450 mm diameter pipe 34 each 702.00 23868.00
347.11 500 mm dia meterpipe 34 each 778.45 26467.30
347.12 600 mm diameter pipe 34 each 892.00 30328.00
348 Providing and fixing CI sluice valves (with cap ) complete with bolts
nuts rubber insertions etc. (the tail pieces if required will be paid
separately)
348.1 100 mm dia pipe
348.1.1 Class I 34 each 2468.05 83913.70
348.1.2 Class II 34 each 2550.45 86715.30
348.2 Nil
348.3 Nil
348.4 125 mm dia pipe
348.4.1 Class I 34 each 3034.75 103181.50
348.4.2 Class II 34 each 3163.60 107562.40
348.5 Nil
348.6 Nil
348.7 150 mm dia pipe
348.7.1 Class I 34 each 3689.10 125429.40
348.7.2 Class II 34 each 3889.75 132251.50
348.8 Nil
348.9 Nil
348.1 200 mm dia pipe
348.10.1 Class I 34 each 6731.80 228881.20
348.10.2 Class II 34 each 7221.20 245520.80
348.11 Nil
348.12 Nil
348.13 250 mm dia pipe
348.13.1 Class I 34 each 10013.80 340469.20
348.13.2 Class II 34 each 10240.90 348190.60
348.14 Nil
348.15 Nil
348.16 300 mm dia pipe
348.16.1 Class I 34 each 12270.50 417197.00
348.16.2 Class II 34 each 12718.30 432422.20
349 Constructing masonry chamber 30x30x50 cm inside with 75 class
designation brick work in cement mortar 1:4( 1 cement 4 coarse sand )
for stop cock with CI surface box 100x100x75mm (inside) with hinged
cover fixed in cement concrete slab 1:2:4 mix ( 1 cement 2 coarse sand
4 graded stone aggregate 20mm nominal size) necessary excavation
foundation concrete 1:5:10( 1 cement 5 fine sand 10 graded stone
aggregate 40mm nominal size) and 12mm thick finished with a floating
coat of neat cement complete as per standard design

349.1 With FPS bricks 34 each 462.57 15727.45 Cement / Steel will be issued free of
cost from BHEL Stores

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

350 Constructing masonry chamber 60x60x75 cm inside with 75 class

designation brick work in cement mortar 1:4 ( 1 cement 4 coarse sand)
for sluice valve with CI surface box 100mm top diameter 160mm
bottom diameter and 180mm deep (inside) with chained lid and RCC
top slab 1:2:4 mix ( 1 cement 2 coarse sand 4 graded stone aggregate
20mm nominal size) necessary excavation foundation concrete 1:5:10(
1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3(1 cement 3 coarsed sand)
12mm thick finished with a floating coat of neat cement complete as
per standard design

350.1 With FPS bricks 34 each 2835.27 96399.11 Cement / Steel will be issued free of
cost from BHEL Stores
351 Constructing masonry chamber 90x90x100 cm inside with 75 class
designation brick work in cement mortar 1:4 ( 1 cement 4 coarse sand)
for sluice valve with CI surface box 100mm top diameter 160mm
bottom diameter and 180mm deep (inside) with chained lid and RCC
top slab 1:2:4 mix ( 1 cement 2 coarse sand 4 graded stone aggregate
20mm nominal size) necessary excavation foundation concrete 1:5:10(
1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3(1 cement 3 coarsed sand)
12mm thick finished with a floating coat of neat cement complete as
per standard design

351.1 With FPS bricks 34 each 4839.01 164526.20 Cement / Steel will be issued free of
cost from BHEL Stores
352 Constructing masonry chamber 120x120x100 cm inside with 75 class
designation brick work in cement mortar 1:4 ( 1 cement 4 coarse sand)
for sluice valve with CI surface box 100mm top diameter 160mm
bottom diameter and 180mm deep (inside) with chained lid and RCC
top slab 1:2:4 mix ( 1 cement 2 coarse sand 4 graded stone aggregate
20mm nominal size) necessary excavation foundation concrete 1:5:10(
1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3(1 cement 3 coarsed sand)
12mm thick finished with a floating coat of neat cement complete as
per standard design

352.1 With FPS bricks 34 each 6681.45 227169.30 Cement / Steel will be issued free of
cost from BHEL Stores
353 Constructing masonry chamber 60x60x75 cm inside with 75 class
designation brick work in cement mortar 1:4 ( 1 cement 4 coarse sand)
for sluice valve with CI surface box 100mm top diameter 160mm
bottom diameter and 180mm deep (inside) with chained lid and RCC
top slab 1:2:4 mix ( 1 cement 2 coarse sand 4 graded stone aggregate
20mm nominal size) necessary excavation foundation concrete 1:5:10(
1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3(1 cement 3 coarsed sand)
12mm thick finished with a floating coat of neat cement complete as
per standard design

353.1 With FPS bricks 34 each 2702.51 91885.34 Cement / Steel will be issued free of
cost from BHEL Stores
354 Constructing masonry chamber60x45x50 cm inside with 75 class
designation brick work in cement mortar 1:4 ( 1 cement 4 coarse sand)
for sluice valve with CI surface box 100mm top diameter 160mm
bottom diameter and 180mm deep (inside) with chained lid and RCC
top slab 1:2:4 mix ( 1 cement 2 coarse sand 4 graded stone aggregate
20mm nominal size) necessary excavation foundation concrete 1:5:10(
1 cement 5 fine sand 10 graded stone aggregate 40mm nominal size)
and inside plastering with cement mortar 1:3(1 cement 3 coarsed sand)
12mm thick finished with a floating coat of neat cement complete as
per standard design

354.1 With FPS bricks 34 each 2658.75 90397.43 Cement / Steel will be issued free of
cost from BHEL Stores
355 Painting GI pipes and fitting with synthetic enamal white paint over a
ready mixed priming coat both of approved quality for new work

355.1 15 mm diameter pipe 34 mtr 4.80 163.20

355.2 20 mm diameter pipe 34 mtr 5.45 185.30
355.3 25 mm diameter pipe 34 mtr 7.45 253.30
355.4 32 mm diameter pipe 34 mtr 8.75 297.50
355.5 40 mm diameter pipe 34 mtr 10.40 353.60
355.6 50 mm diameter pipe 34 mtr 12.20 414.80
356 Repainting GI pipes and fitting with synthetic enamal white paint of
approved quality
355.1 15 mm diameter pipe 34 mtr 2.45 83.30
355.2 20 mm diameter pipe 34 mtr 2.85 96.90
355.3 25 mm diameter pipe 34 mtr 3.70 125.80
355.4 32 mm diameter pipe 34 mtr 4.30 146.20
355.5 40 mm diameter pipe 34 mtr 5.05 171.70
355.6 50 mm diameter pipe 34 mtr 5.90 200.60

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

356.7 Painting GI pipes and fitting two coats of anti corrosive bitumastic
paint of approved quality
356.7.1 15 mm diameter pipe 34 mtr 2.60 88.40
356.7.2 20 mm diameter pipe 34 mtr 3.05 103.70
356.7.3 25 mm diameter pipe 34 mtr 3.90 132.60
356.7.4 32 mm diameter pipe 34 mtr 4.55 154.70
356.7.5 40 mm diameter pipe 34 mtr 5.20 176.80
356.7.6 50 mm diameter pipe 34 mtr 6.10 207.40
356.7.7 40 mm diameter pipe 34 mtr 7.50 255.00
356.7.8 50 mm diameter pipe 34 mtr 8.65 294.10
357 Providing and filling sand of grading Zone V or coarse grade all round
the GI pipes in external work
357.1 15 mm diameter pipe 34 mtr 21.95 746.30
357.2 20 mm diameter pipe 34 mtr 22.25 756.50
357.3 25 mm diameter pipe 34 mtr 22.85 776.90
357.4 32 mm diameter pipe 34 mtr 23.40 795.60
357.5 40 mm diameter pipe 34 mtr 23.70 805.80
357.6 50 mm diameter pipe 34 mtr 24.60 836.40
357.7 65 mm diameter pipe 34 mtr 38.85 1320.90
357.8 80 mm diameter pipe 34 mtr 40.00 1360.00
357.9 100 mm diameter pipe 34 mtr 42.40 1441.60
357.1 150 mm diameter pipe 34 mtr 63.15 2147.10
358 Boring with 100mm diametre casting pipe for hand pump/ tube well in
all soils except ordinary hard rocks requiring blasting including
removing the casting pipe after the hand pipe / tube well is lowered
and tested

358.1 Upto 6mtr depth 34 mtr 151.00 5134.00

358.2 Beyond 6m and upto 12m depth 34 mtr 179.25 6094.50
358.3 Beyond 12m and upto 18m depth 34 mtr 208.70 7095.80
359 Providing and placing in position filters of 40mm diameter GI pipe with 34 mtr 367.35 12489.90
brass strainer of approved quality
360 Providing and fixing to filler and lowering to proper levels 40mm GI 34 mtr 209.00 7106.00
pipe for tube well including clearing and priming the tube well

361 Providing and placing in position hand pump of approved quality for 34 each 576.80 19611.20
40mm diameter GI pipe complete with all accessories
362 Providing and fixing GI union in GI pipe including cutting and
threading the pipe and making long screws etc, complete (new work)

362.1 15 mmnominal bore 34 each 75.90 2580.60

362.2 20 mm nominal bore 34 each 96.80 3291.20
362.3 25 mm nominal bore 34 each 107.25 3646.50
362.4 32 mm nominal bore 34 each 123.55 4200.70
362.5 40 mm nominal bore 34 each 164.20 5582.80
362.6 50 mm nominal bore 34 each 235.60 8010.40
362.7 65 mm nominal bore 34 each 428.40 14565.60
362.8 80 mm nominal bore 34 each 507.40 17251.60
362.9 Providing and fixing GI union in existing GI pipe line cutting and
threading the pipe and making long screws including excavation
refilling the earth or cutting of wall and making good the same
complete wherever required

362.9.1 15 mmnominal bore 34 each 149.20 5072.80

362.9.2 20 mm nominal bore 34 each 170.10 5783.40
362.9.3 25 mm nominal bore 34 each 180.55 6138.70
362.9.4 32 mm nominal bore 34 each 196.80 6691.20
362.9.5 40 mm nominal bore 34 each 237.45 8073.30
362.9.6 50 mm nominal bore 34 each 335.50 11407.00
362.9.7 65 mm nominal bore 34 each 528.30 17962.20
362.9.8 80 mm nominal bore 34 each 607.30 20648.20
363 Providing and placing on terrace (at all floor levels) polyethylene water 34 per litre 5.25 178.50
storage tank ISI 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet outlet and overflow
pipes but without fitting and the base support for tank

364 Providing and fixing CP brass bib cock of approved quality conforming
to IS 8931
364.1 15 mmnominal bore 34 each 207.00 7038.00
365 Providing and fixing CP brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810grms

365.1 15 mmnominal bore 34 each 262.05 8909.70

366 Providing and fixing CP brass long body bib cock of approved quility
conforming to IS standards and weighing not less than 690 gms

366.1 15 mmnominal bore 34 each 253.95 8634.30

367 Providing and fixing CP brass stop cock (concealed) of standard design
and of approved make conforming to IS 8931
367.1 15 mmnominal bore 34 each 262.55 8926.70
368 Providing and fixing CP brass angle valve for basin mixer and geyser
points of approved quality conforming to IS 8931a) 15mm nominal
bore
368.1 15mm nominal bore 34 each 347.65 11820.10

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

369 Providing and fixing PTMT bib cock of approved quality and colour

369.1 15mm nominal bore, 86mm long weighing not less than 88gms 34 each 120.85 4108.90
369.2 15mm nominal bore, 122mm long weighing not less than 99gms 34 each 264.90 9006.60
369.3 15mm nominal bore, 165mm long weighing not less than 110gms 34 each 189.40 6439.60

369.4 15mm nominal bore, 90mm long weighing not less than 93gms 34 each 137.15 4663.10
369.5 Providing and fixing PTMT stop cock of approved quality and colour

369.5.1 15mm nominal bore, 86mm long weighing not less than 88gms 34 each 120.85 4108.90
369.5.2 20mm nominal bore, 89mm long weighing not less than 88gms 34 each 148.75 5057.50
369.6 concealed stop cock, 15mm nominal bore, 108mm long weighing not 34 each 195.20 6636.80
less than108gms
370 Providing and fixing PTMT pillar cock of approved quality and colour

370.1 15mm nominal bore, 107mm long weighing not less than 110gms 34 each 185.25 6298.50

370.2 15mm nominal bore, 125mm long weighing not less than 120gms 34 each 266.55 9062.70

371 Providing and fixing PTMT push cock of approved quality and colour

371.1 15mm nominal bore, 98mm long weighing not less than 75gms 34 each 113.90 3872.60
371.2 15mm nominal bore, 80mm long weighing not less than 46gms 34 each 96.45 3279.30
372 Providing and fixing PTMT grating of approved quality and colour .

372.1 Circular type

372.1.1 100 mm nominal dia . 34 each 39.70 1349.80
372.1.2 125 mmnominal dia with 25mm weste hole 34 each 46.65 1586.10
372.2 Nil
372.3 Nil
372.4 Rectangular type with openable circular lid .
372.4.1 150 mm nominal size squre 100 mm diamiter of the inner hinged 34 each 109.35 3717.90
round grating
373 Providing and fixing CI double acting air valve of approved quality with
bolts nuts rubber insertions ect complete ( the tail pieces tapers etc, if
required will be paid separately)
373.1 50mm dia 34 each 3615.70 122933.80
373.2 80mm dia 34 each 5276.65 179406.10
373.3 100mm dia 34 each 6858.75 233197.50
374 Providing and fixing enclosed type water meter (bulk type) conforming
to IS 2373 and tested by municipal board complete with bolts nuts
rubber insertions etc. ( the tail pieces if required will be paid
separately)

374.1 80 mm nominal bore 34 each 2448.40 83245.60

374.2 100 mm nominal bore 34 each 3719.80 126473.20
374.3 150 mm nominal bore 34 each 5261.80 178901.20
374.4 200 mm nominal bore 34 each 5914.55 201094.70
375 Providing and fixing CI dirt box stairner for bulk type water meter with
nuts bolts rubber insertions ect complete conforming to IS 2373

375.1 80mm dia 34 each 3110.45 105755.30

375.2 100mm dia 34 each 4672.20 158854.80
375.3 150mm dia 34 each 6067.85 206306.90
375.4 200mm dia 34 each 8404.80 285763.20
376 Providing and fixing PTMT ball cock of approved quality colour and
make complete with Epoxy coated aluminium rod with L.P/ H.P.H.D
plastic ball
376.1 15mm nominal bore, 105mm long weighing not less than 138gms 34 each 165.60 5630.40

376.2 20mm nominal bore, 120mm long weighing not less than 198gms 34 each 234.50 7973.00

376.3 25mm nominal bore, 152mm long weighing not less than 440gms 34 each 497.40 16911.60

376.4 40mm nominal bore, 206mm long weighing not less than 690gms 34 each 902.75 30693.50

376.5 50mm nominal bore, 242mm long weighing not less than 1240gms 34 each 1338.30 45502.20

377 Providing and fixing PTMT angle stop cock 15mm nominal bore 34 each 148.75 5057.50
weighing not less than 85 gms
378 Providing and fixing PTMT swivelling shower 15mm nominal bore 34 each 101.95 3466.30
weighing not less than 40 gms
379 Providing and fixing PTMT soap Dish holder having length of 138mm 34 each 133.30 4532.20
breadth 102mm height of 75mm with concealed fitting arrangement.
Weighing not less than 106gms
380 Providing and laying S&S CI standard specials such as tees bends
collars tapers and caps etc suitable for flanged jointing as per IS 1538

380.1 Upto 300mm dia 34 quintal 4205.85 142998.90

380.2 Above 300mm dia 34 quintal 4737.80 161085.20
381 Providing and laying S&S CI standard specials suitable for mechanical
jointing as per IS 13382
381.1 Upto 300mm dia 34 quintal 6305.85 214398.90
381.2 Above 300mm dia 34 quintal 6586.90 223954.60
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

382 Providing and laying DI special of class K- 12 suitable for mechanical

joints as per IS 9523
382.1 Upto 600mm dia 34 quintal 10487.25 356566.50
382.2 Above 600mm dia 34 quintal 15685.00 533290.00
383 Providing and laying DI special of class K- 12 suitable for mechanical
joints as per IS 9523
383.1 Upto 600mm dia 34 quintal 11023.85 374810.90
383.2 Above 600mm dia 34 quintal 16644.40 565909.60
384 Providingf push on joints to centrifugally (spun) cast iro pipes or
ductile iron pipes including testing of joints and including the cost of
rubber gasket
384.1 100mm dia pips 34 joint 39.00 1326.00
384.2 150mm dia pips 34 joint 60.30 2050.20
384.3 200mm dia pips 34 joint 98.20 3338.80
384.4 250mm dia pips 34 joint 111.70 3797.80
384.5 300mm dia pips 34 joint 153.10 5205.40
384.6 350mm dia pips 34 joint 182.15 6193.10
384.7 400mm dia pips 34 joint 340.40 11573.60
384.8 450mm dia pips 34 joint 378.35 12863.90
384.9 500mm dia pips 34 joint 393.20 13368.80
384.1 600mm dia pips 34 joint 489.30 16636.20
384.11 650mm dia pips 34 joint 739.65 25148.10
384.12 700mm dia pips 34 joint 853.45 29017.30
384.13 800mm dia pips 34 joint 953.35 32413.90
384.14 900mm dia pips 34 joint 1255.25 42678.50
384.15 1000mm dia pips 34 joint 1523.90 51812.60
385 Providing and laying double flanged (screws / welded) centrifugally
(spun) cast iron, class B( IS: 1536)
385.1 100mm dia CI Double Flanged Pipe 34 mtr 1151.15 39139.10
385.2 150mm dia pips CI Double Flanged Pipe 34 mtr 1781.85 60582.90
385.3 200mm dia pips CI Double Flanged Pipe 34 mtr 2468.85 83940.90
385.4 250mm dia pips CI Double Flanged Pipe 34 mtr 3304.85 112364.90
385.5 300mm dia pips CI Double Flanged Pipe 34 mtr 4201.30 142844.20
385.6 350mm dia pips CI Double Flanged Pipe 34 mtr 5372.75 182673.50
385.7 400mm dia pips CI Double Flanged Pipe 34 mtr 6940.35 235971.90
385.8 450mm dia pips CI Double Flanged Pipe 34 mtr 8985.75 305515.50
385.9 500mm dia pips CI Double Flanged Pipe 34 mtr 11716.30 398354.20
386.1 600mm dia pips CI Double Flanged Pipe 34 mtr 15287.90 519788.60
387 Providing and laying S&S centrifugally cast (spun) / Ductile iron pipes
conforming to IS 8329
387.1 100mm dia pips Ductile iron class K-7 pipes 34 mtr 703.30 23912.20
387.2 150mm dia pips Ductile iron class K-7 pipes 34 mtr 1025.40 34863.60
387.3 200mm dia pips Ductile iron class K-7 pipes 34 mtr 1457.15 49543.10
387.4 250mm dia pips Ductile iron class K-7 pipes 34 mtr 1972.55 67066.70
387.5 300mm dia pips Ductile iron class K-7 pipes 34 mtr 2784.90 94686.60
387.6 350mm dia pips Ductile iron class K-7 pipes 34 mtr 3214.25 109284.50
387.7 400mm dia pipsDuctile iron class K-7 pipes 34 mtr 3837.60 130478.40
387.8 450mm dia pips Ductile iron class K-7 pipes 34 mtr 4550.35 154711.90
387.9 500mm dia pips Ductile iron class K-7 pipes 34 mtr 5367.20 182484.80
387.1 600mm dia pips Ductile iron class K-7 pipes 34 mtr 7081.30 240764.20
387.11 700mm dia pips Ductile iron class K-7 pipes 34 mtr 8795.70 299053.80
387.12 800mm dia pips Ductile iron class K-7 pipes 34 mtr 12243.20 416268.80
387.13 900mm dia pips Ductile iron class K-7 pipes 34 mtr 15055.70 511893.80
387.14 1000mm dia pips Ductile iron class K-7 pipes 34 mtr 18247.50 620415.00
387.15 100mm dia pips Ductile iron class K-9 pipes 34 mtr 775.50 26367.00
387.16 150mm dia pips Ductile iron class K-9 pipes 34 mtr 1152.80 39195.20
387.17 200mm dia pips Ductile iron class K-9 pipes 34 mtr 1589.45 54041.30
387.18 250mm dia pips Ductile iron class K-9 pipes 34 mtr 2056.35 69915.90
387.19 300mm dia pips Ductile iron class K-9 pipes 34 mtr 2639.45 89741.30
387.2 350mm dia pips Ductile iron class K-9 pipes 34 mtr 3102.25 105476.50
387.21 400mm dia pips Ductile iron class K-9 pipes 34 mtr 4435.65 150812.10
387.22 450mm dia pips Ductile iron class K-9 pipes 34 mtr 4925.90 167480.60
387.23 500mm dia pips Ductile iron class K-9 pipes 34 mtr 6591.35 224105.90
387.24 600mm dia pips Ductile iron class K-9 pipes 34 mtr 7404.65 251758.10
387.25 700mm dia pips Ductile iron class K-9 pipes 34 mtr 10052.75 341793.50
387.26 750mm dia pips Ductile iron class K-9 pipes 34 mtr 11464.10 389779.40
387.27 800mm dia pips Ductile iron class K-9 pipes 34 mtr 11808.40 401485.60
387.28 900mm dia pips Ductile iron class K-9 pipes 34 mtr 13770.10 468183.40
387.29 1000mm dia pips Ductile iron class K-9 pipes 34 mtr 15500.90 527030.60
388 Providing and laying double flanged (screws / welded) centrifugally
(spun) ductile pipes of class K-9 conforming to IS 8329

388.1 100mm dia pips Ductile iron Double Flanged 34 mtr 2206.35 75015.90
388.2 150mm dia pips Ductile iron Double Flanged 34 mtr 3055.35 103881.90
388.3 200mm dia pips Ductile iron Double Flanged 34 mtr 3963.40 134755.60
388.4 250mm dia pips Ductile iron Double Flanged 34 mtr 5262.65 178930.10
388.5 300mm dia pips Ductile iron Double Flanged 34 mtr 6771.65 230236.10
388.6 350mm dia pips Ductile iron Double Flanged 34 mtr 8434.20 286762.80
388.7 400mm dia pipsDuctile iron Double Flanged 34 mtr 10076.25 342592.50
388.8 450mm dia pips Ductile iron Double Flanged 34 mtr 12180.70 414143.80
388.9 500mm dia pips Ductile iron Double Flanged 34 mtr 14761.20 501880.80
388.1 600mm dia pips Ductile iron Double Flanged 34 mtr 20023.70 680805.80
388.11 700mm dia pips Ductile iron Double Flanged 34 mtr 24693.40 839575.60
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

389 Providing and fixing unplasticised PVC connection pipe with PTMT
nuts collar and bush of approved quality and colour
389.1 15mm nominal bore with 30cm length 34 each 45.55 1548.70
389.2 15mm nominal bore with 45 cm length 34 each 52.90 1798.60
390 Providing and fixing PTMT extension nipple for water tank pipe fitting
of approved quality and colour
390.1 15mm nominal bore. weighing not less than 32gms 34 each 38.75 1317.50
390.2 20mm nominal bore. weighing not less than 40gms 34 each 45.75 1555.50
390.3 25mm nominal bore. weighing not less than 62gms 34 each 66.65 2266.10
391 Cutting holes up to 30x 30 cm in walls including making good the
same
391.1 with FPS bricks 34 each 75.49 2566.60 Cement / Steel will be issued free of
cost from BHEL Stores
392 Cutting holes up to 15 x 15 cm in RCC floors and roofs for passing 34 each 78.56 2670.88 Cement / Steel will be issued free of
drain pipe etc, and repairing the holes after insertion of drain pipe etc. cost from BHEL Stores
with cement concrete 1:2:4( 1cement 2 coarse sand 4 grade stone
aggregate 20mm nominal size) including finishing complete so as to
make it leak proof

393 Making chases up to 7.5 x 7.5 cm in walls including making good and 34 mtr 32.01 1088.18 Cement / Steel will be issued free of
finishing with matching surface after housing GI pipe etc. cost from BHEL Stores

394 Making hole up to 20x20cm and embedding pipes up to 150mm 34 mtr 44.19 1502.39 Cement / Steel will be issued free of
diameter in masonry and filling with cement concrete 1:3:6( 1 cement cost from BHEL Stores
3 coarse sand 6 graded stone aggregate 20mm nominal size) including
disposal of malba

395 Disinfecting CI water mains by flushing with water containing

bleaching power at 0.5 gms per litre of water and cleaning the same
with fresh water operation to be repeated three times including getting
the sample of water from the disinfected main tested in the municipal
laboratory

395.1 80 mm dia meter C.I pipe 34 mtr 2.90 98.52

395.2 100 mm dia meter C.I pipe 34 mtr 3.81 129.59
395.3 125 mm dia meter C.I pipe 34 mtr 4.79 162.81
395.4 150 mm dia meter C.I pipe 34 mtr 5.81 197.47
395.5 200 mm dia meter C.I pipe 34 mtr 7.87 267.56
395.6 250 mm dia meter C.I pipe 34 mtr 10.08 342.57
395.7 300 mm dia meter C.I pipe 34 mtr 11.50 391.00
395.8 350 mm dia meter C.I pipe 34 mtr 13.03 443.00
395.9 400 mm dia meter C.I pipe 34 mtr 14.71 499.97
395.1 450 mm dia meter C.I pipe 34 mtr 16.46 559.52
395.11 500 mm dia meter C.I pipe 34 mtr 18.35 623.75
395.12 600 mm dia meter C.I pipe 34 mtr 22.36 760.14
396 Extra for every operation disinfecting the CI main by flusing with water
containing bleaching powder at 0.5 gms per litre of water and cleaning
the same with fresh water including getting the samples of water
tested in the municipal laboratory

396.1 80 mm dia meter C.I pipe 34 mtr 1.07 36.33

396.2 100 mm dia meter C.I pipe 34 mtr 1.30 44.22
396.3 125 mm dia meter C.I pipe 34 mtr 1.60 54.25

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

396.4 150 mm dia meter C.I pipe 34 mtr 1.88 64.01

396.5 200 mm dia meter C.I pipe 34 mtr 2.84 96.46
396.6 250 mm dia meter C.I pipe 34 mtr 3.36 114.22
396.7 300 mm dia meter C.I pipe 34 mtr 3.89 132.09
396.8 350 mm dia meter C.I pipe 34 mtr 4.64 157.74
396.9 400 mm dia meter C.I pipe 34 mtr 5.42 184.31
396.1 450 mm dia meter C.I pipe 34 mtr 6.25 212.47
396.11 500 mm dia meter C.I pipe 34 mtr 7.09 241.18
396.12 600 mm dia meter C.I pipe 34 mtr 8.88 301.90
397 Dismantling old CI pipes incliding excavation and refilling trenches
after taking out the pipes breaking lead caulked joints melting of lead
and making into blockes including stacking of pipes at site lead up to
50 mtr

397.1 80 mm dia meter C.I pipe 25 mtr 0.83 20.66

397.2 100 mm dia meter C.I pipe 25 mtr 0.85 21.34
397.3 125 mm dia meter C.I pipe 25 mtr 0.88 21.95
397.4 150 mm dia meter C.I pipe 25 mtr 0.90 22.61
397.5 200 mm dia meter C.I pipe 25 mtr 1.00 24.99
397.6 250 mm dia meter C.I pipe 25 mtr 1.09 27.33
397.7 300 mm dia meter C.I pipe 25 mtr 1.17 29.33
397.8 350 mm dia meter C.I pipe 25 mtr 1.25 31.15
397.9 400 mm dia meter C.I pipe 25 mtr 1.31 32.79
379.1 450 mm dia meter C.I pipe 25 mtr 1.38 34.49
379.11 500 mm dia meter C.I pipe 25 mtr 1.46 36.41
379.12 600 mm dia meter C.I pipe 25 mtr 1.53 38.30
380 Labour for cutting CI pipe with steel saw
380.1 80 mm dia meter C.I pipe 25 each cut 22.10 552.50
380.2 100 mm dia meter C.I pipe 25 each cut 29.80 745.00
380.3 125 mm dia meter C.I pipe 25 each cut 41.75 1043.75
380.4 150 mm dia meter C.I pipe 25 each cut 56.15 1403.75
380.5 200 mm dia meter C.I pipe 25 each cut 74.90 1872.50
380.6 250 mm dia meter C.I pipe 25 each cut 92.65 2316.25
380.7 300 mm dia meter C.I pipe 25 each cut 111.40 2785.00
380.8 350 mm dia meter C.I pipe 25 each cut 129.10 3227.50
380.9 400 mm dia meter C.I pipe 25 each cut 147.70 3692.50
380.1 450 mm dia meter C.I pipe 25 each cut 165.60 4140.00
380.11 500 mm dia meter C.I pipe 25 each cut 184.20 4605.00
380.12 600 mm dia meter C.I pipe 25 each cut 218.55 5463.75
381 NIL
to
411
DRAINAGE WORKS
412 Providing and laying and jointing glazed stoneware pipes grade "A"
with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement
1 fine sand ) including testing of joints etc. complete
412.1 100 mm diameter 34 mtr 94.45 3211.19 Cement / Steel will be issued free of
cost from BHEL Stores
412.2 150 mm diameter 34 mtr 134.60 4576.47 Cement / Steel will be issued free of
cost from BHEL Stores
412.3 200 mm diameter 34 mtr 224.30 7626.07 Cement / Steel will be issued free of
cost from BHEL Stores
412.4 230 mm diameter 34 mtr 244.20 8302.67 Cement / Steel will be issued free of
cost from BHEL Stores
412.5 250 mm diameter 34 mtr 314.35 10687.86 Cement / Steel will be issued free of
cost from BHEL Stores
412.6 300 mm diameter 34 mtr 435.50 14807.05 Cement / Steel will be issued free of
cost from BHEL Stores
413 Providing and fixing square mouth SW gully trap grade :A: complete
with CI grating brick masonry chamber with water tight CI cover with
frame of 300x300mm size(inside) the weighing of cover to be not less
than 4.50kg and frame to be not less than 2.70kg as per standard
design

413.1 100x100mm size P type

414.1.1 With FPS bricks class designation 75 34 each 792.64 26949.90
415.1.2 with sewer bricks conforming to IS 4885 34 each 890.84 30288.70
415.2 Nil
415.3 Nil
415.4 150x100mm size P type
415.4.1 With FPS bricks class designation 75 34 each 824.72 28040.55
415.4.2 with sewer bricks conforming to IS 4885 34 each 922.92 31379.35
415.5 Nil
415.6 Nil
415.7 180x150mm size P type
415.7.1 With FPS bricks class designation 75 34 each 904.80 30763.20
415.7.2 with sewer bricks conforming to IS 4885 34 each 1003.00 34102.00
416 Dismantling of old SW pipe including breaking of joints and bed
concrete stacking of useful materials near the site within 50m lead and
disposal of unservicable materials into municipal dumps

416.1 100 mm diameter 34 mtr 13.35 453.90

416.2 150 mm diameter 34 mtr 14.75 501.50
416.3 200 mm diameter 34 mtr 15.70 533.80
416.4 230 mm diameter 34 mtr 16.20 550.80
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

416.5 250 mm diameter 34 mtr 16.65 566.10

416.6 300 mm diameter 34 mtr 17.60 598.40
416.7 350 mm diameter 34 mtr 20.25 688.50
416.8 400 mm diameter 34 mtr 22.15 753.10
416.9 450 mm diameter 34 mtr 23.10 785.40
417 Providing and laying non- pressure NP2 class (light duty) RCC pipes
with collars joints with stiff mixture of cement mortar in the proportion
of 1:2 ( 1 cement 2 fine sand ) including testing of joints etc, complete

417.1 100 mm dia RCC pipe 34 mtr 171.31 5824.57 Cement / Steel will be issued free of
cost from BHEL Stores
417.2 150 mm dia RCC pipe 34 mtr 199.68 6789.23 Cement / Steel will be issued free of
cost from BHEL Stores
417.3 250 mm dia RCC pipe 34 mtr 253.45 8617.29 Cement / Steel will be issued free of
cost from BHEL Stores
417.4 300 mm dia RCC pipe 34 mtr 332.94 11320.10 Cement / Steel will be issued free of
cost from BHEL Stores
417.5 450 mm dia RCC pipe 34 mtr 486.88 16554.02 Cement / Steel will be issued free of
cost from BHEL Stores
417.6 500 mm dia RCC pipe 34 mtr 571.13 19418.32 Cement / Steel will be issued free of
cost from BHEL Stores
417.7 600 mm dia RCC pipe 34 mtr 878.21 29859.15 Cement / Steel will be issued free of
cost from BHEL Stores
417.8 700 mm dia RCC pipe 34 mtr 981.37 33366.63 Cement / Steel will be issued free of
cost from BHEL Stores
417.9 800 mm dia RCC pipe 34 mtr 1145.23 38937.90 Cement / Steel will be issued free of
cost from BHEL Stores
417.1 900 mm dia RCC pipe 34 mtr 1388.04 47193.29 Cement / Steel will be issued free of
cost from BHEL Stores
417.11 1000 mm dia RCC pipe 34 mtr 1711.92 58205.31 Cement / Steel will be issued free of
cost from BHEL Stores
417.12 1100 mm dia RCC pipe 34 mtr 2061.50 70091.14 Cement / Steel will be issued free of
cost from BHEL Stores
417.13 1200 mm dia RCC pipe 34 mtr 2172.41 73861.93 Cement / Steel will be issued free of
cost from BHEL Stores
418 Constructing brick masonry manhole in cement mortar 1:4( 1 cement
4 coarse sand ) RCC top slab with 1:2:4 mix ( 1 cement 2 coarse sand 4
graded stone aggregate 20mm nominal size) foundation concrete 1:4:8
mix (1 cement 4 coarse sand 8 graded stone aggregate 40mm nominal
size) inside plastering 12mm thick with cement mortar 1:3( 1 cement 3
coarse sand ) finished with floating coat of neat cement and making
channels in cement concrete 1:2:4( 1 cement 2 coarse sand 4 graded
stone aggregate 20mm nominal size) finished with a floating coat of
neat cement complete as per standard design

418.1 Inside size 90x80 cm and 45cm deep including CI cover with frame
(light duty) 455x610mm internal dimensions total weight of cover and
frame to be not less than 38 kg ( weight to cover 23 kg and weight of
frame 15 kg

418.1.1 With FPS bricks with class designation 75 34 each 3842.52 130645.82 Cement / Steel will be issued free of
cost from BHEL Stores
418.1.2 with sewer bricks conforming to IS 4885 34 each 4099.32 139377.02 Cement / Steel will be issued free of
cost from BHEL Stores
418.2 Nil
418.3 Nil
418.4 Inside size 102x90 cm and 90cm deep including CI cover with frame
(medium duty) 500mm internal dimensions total weight of cover and
frame to be not less than 116 kg ( weight to cover 58 kg and weight of
frame 58 kg

418.4.1 With FPS bricks with class designation 75 34 each 9385.71 319114.00 Cement / Steel will be issued free of
cost from BHEL Stores
418.4.2 with sewer bricks conforming to IS 4885 34 each 10088.16 342997.30 Cement / Steel will be issued free of
cost from BHEL Stores
418.5 Nil
418.6 Nil
418.7 Inside size 102x90 cm and 90cm deep including CI cover with frame
(heavy duty) 560mm internal dimensions total weight of cover and
frame to be not less than 208 kg ( weight to cover 108 kg and weight of
frame 100 kg

418.7.1 With FPS bricks with class designation 75 34 each 13177.36 448030.10 Cement / Steel will be issued free of
cost from BHEL Stores
418.7.2 with sewer bricks conforming to IS 4885 34 each 13781.61 468574.60 Cement / Steel will be issued free of
cost from BHEL Stores
419 Extra for depth for manholes
419.1 Size 90x80cm
419.1.1 With FPS bricks with class designation 75 34 each 1988.97 67625.05 Cement / Steel will be issued free of
cost from BHEL Stores
419.1.2 with sewer bricks conforming to IS 4885 34 each 2736.77 93050.25 Cement / Steel will be issued free of
cost from BHEL Stores
419.2 Nil
419.3 Nil
419.4 size 120x90cm

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

419.4.1 With FPS bricks with class designation 75 34 each 2377.69 80841.60 Cement / Steel will be issued free of
cost from BHEL Stores
419.4.2 with sewer bricks conforming to IS 4885 34 each 3269.04 111147.50 Cement / Steel will be issued free of
cost from BHEL Stores
420 Constructing brick masonry circular type manhole 0.91mm internal
dia at bottom and 0.56m dia at top in cement mortar 1:4( 1 cement 4
coarse sand ) in side cement plaster 12mm thick with cement mortar
1:3( 1 cement 3 coarse sand ) finished with a floating coat of neat
cement foundation concrete 1:3:6( 1 cement 3 coarse sand 6 graded
stone aggregate 40mm nominal size) and making necessary channel in
cement concrete 1:2:4( 1 cement 2 coarse sand 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat
cement all complete as per standard design

420.1 0.91m deep with SFRC cover and frame (heavy duty HD-20 grade
designation) 560mm internal diameter conforming to IS 12592 total
weight of cover and frame to be not less than 182 kg, fixed in cement
concrete 1:2:4( 1 cement 2 coarse sand 4 graded stones aggregate
20mm nominal size) including centering shuttering all complete at the
external surface shall be paid for separately)

420.1.1 With FPS bricks with class designation 75 34 each 3482.05 118389.70 Cement / Steel will be issued free of
cost from BHEL Stores
420.1.2 with sewer bricks conforming to IS 4885 34 each 3896.45 132479.30 Cement / Steel will be issued free of
cost from BHEL Stores
421 Extra depth for circular type manhole o.91m internal dia(at bottom)
with beyond 0.91m to 1.67m
421.1 with F.P.S bricks class designation 75 34 mtr 384.39 13069.33 Cement / Steel will be issued free of
cost from BHEL Stores
421.2 with sewer bricks conforming to IS 4885 34 mtr 1010.54 34358.43 Cement / Steel will be issued free of
cost from BHEL Stores
422 Providing NS foot rests including fixing in manholes with 20x20x10 cm
cement concrete blocks 1:3:6( 1cement 3 coarse sand 6 graded stone
aggregate 20mm nominal size) as per standards design

422.2 with 20x20mm square bar 34 each 145.21 4936.98 Cement / Steel will be issued free of
cost from BHEL Stores
422.3 with 20mm dia meter round bar 34 each 120.51 4097.18 Cement / Steel will be issued free of
cost from BHEL Stores
423 Providing and fixing in position pre cast RCC manholescover and frame
of required shape and approved quality
423.1 LD-2.5
423.1.1 Rectangular shape 600x450mm internal diamensions 34 each 815.69 27733.51 Cement / Steel will be issued free of
cost from BHEL Stores
423.1.2 square shape 450mm internal diamensions 34 each 697.83 23726.26 Cement / Steel will be issued free of
cost from BHEL Stores
423.1.3 Circular shape 450mm internal diameter 34 each 621.13 21118.46 Cement / Steel will be issued free of
cost from BHEL Stores
423.2 Nil
423.4 Nil
423.5 MD-10
423.5.1 square shape 450mm internal diamensions 34 each 757.79 25764.91 Cement / Steel will be issued free of
cost from BHEL Stores
423.5.2 Circular shape500mm internal diameter 34 each 742.08 25230.76 Cement / Steel will be issued free of
cost from BHEL Stores
423.6 Nil
423.7 Nil
423.8 HD-20
423.8.1 Circular shape560mm internal diameter 34 each 1059.63 36027.46 Cement / Steel will be issued free of
cost from BHEL Stores
423.9 EHD-35
423.9.1 Circular shape560mm internal diameter 34 each 1172.33 39859.26 Cement / Steel will be issued free of
cost from BHEL Stores
424 Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls floors with cement
concrete 1:2:4 mix( 1 cement 2 coarse sand 4 grades stone aggregate
20mm nominal size) cement plastered on both sides with cement
mortar 1:3( 1 cement 3 coarse sand) finished with a floating coat of
neat cement and making neccessary channels for the drain etc.
complete

424.1 For pipes 100 to 230mm diameter 34 each 134.74 4581.27 Cement / Steel will be issued free of
cost from BHEL Stores
424.2 for pipes 250 to 300mm diameter 34 each 155.26 5278.81 Cement / Steel will be issued free of
cost from BHEL Stores
424.3 for pipes 350 to 450mm diameter 34 each 222.20 7554.68 Cement / Steel will be issued free of
cost from BHEL Stores

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

425 Dismantling of manhole including RCC top slab CI cover with frame
including stacking of useful materials near the site and disposal of
unserviceable materials into municipal dumps within 50m lead

425.1 Rectangular manhole 90x80cm and 45cm deep 34 each 388.75 13217.50
425.2 Rectangular manhole 120x90cm and 90cm deep 34 each 680.85 23148.90
425.3 Rectangular arch type manhole 140x90cm and 2.45m deep 34 each 1277.35 43429.90
425.4 Circular manhole 122cm diameter and 1.68m deep 34 each 988.45 33607.30
425 Raising manhole cover and frame slab to required level including
dismantling existing slab and making good the damage as required
(Raising depth of manhole to be paid separately)

425.1 Rectangular manhole 90x80cm with rectangular cover 600x450mm of 34 each 824.25 28024.50
grade LD-2.5
425.2 Rectangular manhole 120x90cm with circular cover 500mm dia of 34 each 1287.45 43773.30
grade MD-10
425.3 Rectangular manhole 120x90cm with circular cover 560mm dia of 34 each 1198.10 40735.40
grade HD-20
425.4 Circular manhole 140cm dia with circular cover 600mm dia of grade 34 each 115.25 3918.50
EHD-35
426 Constructing brick masnory chamber for underground CI inspection
chamber and bends with 75 class designation bricks in cement mortar
1:4( 1 cement 4 coarse sand) CI cover with frame (light duty)
455x610mm internal diamensions total weight of cover with frame to
be not less than 38kg (weight of cover 23kg and weight of frame 15kg )
RCC top slab with 1:2:4 mix( 1 cement 2 coarse sand 4 graded stone
aggregate 20mm nominal size) foundation concrete 1:5:10 ( 1 cement 5
fine sand 10 graded stone aggregate 40mm nominal size) inside
plastering 12mm thick with cement mortar 1:3( 1cement 3 coarse sand
) finished smooth with a floating coat of neat cement on walls and bed
concrete etc, complete as per standard design

426.1 Inside dimensions 455x610mm and 45 cm deep for single pipe line

426.1.1 with FPS bricks 34 each 2671.38 90826.92 Cement / Steel will be issued free of
cost from BHEL Stores
426.2 Nil
426.3 inside dimensions 500x700mm and 45cm deep for pipe line with one
or two inlets
426.3.1 with FPS bricks 34 each 3052.59 103788.20 Cement / Steel will be issued free of
cost from BHEL Stores
426.4 Nil
426.5 inside dimensions 600x850mm and 45cm deep for pipe line with three
or more inlets
426.5.1 with FPS bricks 34 each 3398.19 115538.60 Cement / Steel will be issued free of
cost from BHEL Stores
427 Extra for depth beyond 45 cm of brick masonry chamber
427.1 For 455x610mm size
427.1.1 with FPS bricks 34 mtr 1386.46 47139.78 Cement / Steel will be issued free of
cost from BHEL Stores
427.2 Nil
427.3 For 500x700 mm size
427.3.1 with FPS bricks 34 mtr 1512.29 51417.86 Cement / Steel will be issued free of
cost from BHEL Stores
427.4 Nil
427.5 For 600x 850 mm size
427.5.1 with FPS bricks 34 mtr 1754.16 59641.58 Cement / Steel will be issued free of
cost from BHEL Stores
428 Cleaning of Inspection Chamber / Manholes of different sizes, and
diameters, silt, sand, root from Chambers and waste materials to be
removed and disposal upto 10 Meters etc complete as directed by the
Engineer-in-charge.

428.1 For Inspection Chambers 34 Nos 241.00 8194.00

428.2 For main Man holes upto any depth existing in township. 34 Nos 527.00 17918.00
429 Cleaning of external Sewerlines SWG/RCC Line of different
Diameters.With bamboos / roding by using rope with knots, the line
should be clear with all organic materials etc including roots, removal
of silt, obstructed sludge with required tools, removal of silt sand,
material came from the manholes, disposal upto lift upon a distance of
2 KM or suitable place as directed by the Engineer-in-charge.

429.1 4" Dia SWG Line Cleaning 34 One Rmt 9.80 333.20
429.2 6" Dia SWG Line Cleaning 34 One Rmt 18.20 618.80
429.3 9" Dia SWG Line Cleaning 34 One Rmt 24.80 843.20
429.4 12" Dia SWG Line Cleaning 34 One Rmt 40.00 1360.00
430 Providing and fixing in position pre-cast R.C.C. SFRC or other 34 Each 584.00 19856.00
approved brand light duty rectangular shape man hole covers of 900
x 450 mm internal dimensions or suitable to present inspection
chamber covers, of approved quality including transporting to each
quarter and placing in position etc complete all as directed by
Engineer-in-charge.

ROAD WORKS
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

431 Preparation and consolidation of sub grade with power road roller of 8 34 sqm 33.90 1152.60
to 12 tonnes capacity after excavating earth to an average of 22.5cm
depth dressing to camber and consolidating with road roller including
making good the undulations etc. and re-rolling the sub grade and
disposal of surface earth lead upto 50mtr

432 Extra for compaction of earth work in embankment under optimum 34 cum 4.50 153.00
moisture conditions to give at least 95% of the maximum dry density
(proctor density)
433 Supplying and stacking at site
433.1 90mm to 45mm size stone aggregate 34 cum 742.30 25238.20
433.2 63mm to 45mm size stone aggregate 34 cum 768.45 26127.30
433.3 53mm to 22.4mm size stone aggregate 34 cum 810.55 27558.70
433.4 over burnt (Jhama) brick aggregate 120mm to 40mm 34 cum 398.20 13538.80
433.5 over burnt (Jhama) brick aggregate 90mm to 45mm 34 cum 438.85 14920.90
433.6 stone screening 13.2mm nominal size (Type A) 34 cum 892.25 30336.50
433.7 stone screening 11.2mm nominal size (Type B) 34 cum 979.40 33299.60
433.8 Red bajri 34 cum 654.15 22241.10
433.9 Good earth 34 cum 144.05 4897.70
433.10 moorum 34 cum 421.85 14342.90
434 Laying spreading and compacting stone aggregate of specified sizes to 34 cum 192.55 6546.70
WBM specifications including spreading in uniform thickness hand
picking rolling with 3 wheeled road/ vibratory roller 8-10 tonnes in
stages to proper grade and camber applying and brooming requisite
type of screening / binding material to fill up interstices of coarse
aggregate watering and compacting to the required density.

435 Laying water bound macadam sub base with brick aggregate and
blinding material earth etc. including screening sorting and spreading
to template and consolidation with light power road roller etc.(payment
for brick aggregate and moorum etc to be made separately)

435.1 over burnt (Jhama) brick aggregate 120mm to 40mm 34 cum 136.20 4630.80
435.5 over burnt (Jhama) brick aggregate 90mm to 45mm 34 cum 136.20 4630.80
436 Supplying stacking and spreading 6mm thick red bajri watering and
rolling complete including preparation of the surface and rolling

436.1 With road roller / hand roller 34 sqm 6.70 227.80

437 Brick edging in full brick width and half brick depth including
excavation. Reffiling and disposal of surplus earth lead upto 50mtr

437.1 With FPS bricks of class designation 75 34 mtr 52.35 1779.90

438 Brick edging laid lengthwise with half brick depth including excavatio,
refilling and disposal of surplus earth lead upto 50mtr
438.1 With FPS bricks of class designation 75 34 mtr 14.90 506.60
439 Scarifying metalled (water bound) road surface including disposal of 34 sqm 6.45 219.30
rubbish lead upto 50m and consolidation of the aggregate received
from scarifing with power road roller of 8 to 10 tonnes capacity

440 Making bajri path including preparation of subgrade supplying and 34 sqm 69.95 2378.30
laying brick aggregate of 50mm nominal size 7.5cm deep with blinding
material consisting of 12mm moorum and 12mm red bajri consolidated
with road roller

441 Dry stone pitching 22.5cm thick including supply of stones and 34 sqm 211.10 7177.40
preparing surface completes
441 Dry brick pitching half brick thick in drains including supply of bricks
and preparing the surface complete
441.1 With FPS bricks of class designation 75 34 sqm 183.55 6240.70
441.2 Cutting road and making good the same including supply of extra
quantities of material ie aggregate moorum screening red bajri and
labour required
441.2.1 water bound macadam 34 cum 572.45 19463.30
442 Cutting bajri paths and making good the same including supply of 34 sqm 53.25 1810.50
extra quantities of brick aggregate moorum and red bajri required

443 Supplying at site

443.1 RCC standard post/ struts/ rails/ pales of mix 1:1.5:3( 1cement 34 cum 10361.90 352304.60 Cement / Steel will be issued free of
1.5coarse sand 3 graded stone aggregate 12.5mm nominal size) with cost from BHEL Stores
wooden plugs or 6mm bar nibs wherever required as per direction of
engineer in charge including fixing (cost of earth works in excavation,
concrete works in foundation to be paid separately)

443.2 Welded steel wire fabric of required width rectangular mesh painted 34 kg 46.50 1581.00
with two or more coats of enamel paint of approved shade over a coat
of primer (painting to be paid for separately)
444 Supplying and fixing turn buckles and straining bolts for barbed wire 34 each set 88.15 2997.10
fencing

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

445 Fencing with RCC post placed at required distance embedded in

cement concrete blocks every 15th post last but one end post and
coner post shall be stutted on both sides and end post one side only,
provided with horizontal lines and two diagonal of barbed wire 9.38kg
per 100mtr (min) between the two posts fitted and fixed with GI staples
on wooden plugs or GI binding wire tied to 6mm bar nibs fixed while
casting the post (cost of RCC posts strusts earth work and concrete to
be paid for separateley) payment to be made per metre cost of total
lenght of barbed wire used

445.1 With GI barbed wire 34 mtr 5.85 198.90

446 Fencing with angle iron post placed at required distance embeded in
cement concrete blocks every 15th post last but one end post and
corner post shall be strutted on both sides and end post on one side
only and provided with horizontal lines and two diagonals interwoven
with horizontal wires of barbed wire 9.38kg per 100m (min) between
the two posts fitted and fixed with GI staples turn buckles etc.
complete (cost of posts struits earth work and concrete work to be paid
for separately) payment to be made per metre cost of total lenght of
barbed wire used

446.1 With GI barbed wire 34 mtr 8.45 287.30

447 Supplying at site angle iron post and strut of required size including 34 kg 43.35 1473.90
bottom to be split and bent at right angle in opposite direction for
10cm length and drilling holes upto 10mm dia etc. complete

448 welded steel wire fabric fencing with posts of specified material and of 34 sqm 11.50 391.00
standard design placed and embedded in cement concrete blocks
45x45x60cm of mix 1:5:10( 1cement 5 fine sand 10 graded stone
aggregate 40mm nominal size) every 15th post last but one end post
and corcer post shall be strutted on both sides and and end post on
one side only and struts embedded in cement concrete blocks
70x45x50cm of the same mix provided with welded steel wire fabric
fixed between the posts fitted and fixing with GI staples on wooden
plugs or tied between the posts fitted and fixed with GI binding wire
(cost of posts welded steel wire fabric painting earth work in excavation
and concrete to be paid for separately)

449 Engraving letters in hard stone 34 per letter 1.55 52.70

per cm
height

450 Providing and fixing 15x15x90cm boundary stone of hard stone with 34 each 77.10 2621.40
top 30cm chisel dressed on all four sides and on top (cost of excavation
refilling and concrete etc. to be paid for separately)
451 Providing and fixing 15cm dia at top 20cm at bottom and 90cm high 34 each 214.87 7305.59 Cement / Steel will be issued free of
precast reiforced cement concrete 1:1.5:3(1 cement 1.5 coarse sand 3 cost from BHEL Stores
graded stone aggregate 20mm nominal size) boundary stone as per
standard design including finishing smooth with cement mortar 1:3( 1
cement 3 fine sand ) (cost of excavation refilling and concreting to be
paid for separately)

452 Providing and fixing precast reinforced cement concrete 1:1.5:3(

1cement 1.5 coarse sand 3 graded stone aggregate 20mm nominal size)
kilometres stones as per standard design including finishing smooth in
1:3 cement mortar (1cement fine sand) but excluding the cost of earth
work concrete in foundation painting and lettering etc. which shall be
paid for separately

452.1 35x111x25cm size 34 each 899.16 30571.58 Cement / Steel will be issued free of
cost from BHEL Stores
452.2 50x152.5x25cm size 34 each 1197.10 40701.25 Cement / Steel will be issued free of
cost from BHEL Stores
452.3 35x93.5x18cm size 34 each 618.81 21039.40 Cement / Steel will be issued free of
cost from BHEL Stores
453 Cement concrete 1:2:4( 1cement 2 coarse sand 4 grade stone aggregate 34 cum 1949.59 66286.06 Cement / Steel will be issued free of
40mm nominal size) in pavements laid to required slope and camber in cost from BHEL Stores
panels as required including consolidation finishing and tamping
complete

454 Providing and laying desing mix cement concrete in raods taxi tracks 34 cum 3692.40 125541.60
and runways having a minimum works test beam flexural strength of
30 kg per cm2 at 28days using not less than 430kg. Of cement per
cum of finished concrete coarse sand and grade stone aggregate of
40mm nominal size in appropriate proportions as per specified design
ctriteria approved by engineer in charge mechanically vibrated using
needle and surface vibrators including steel form work with sturdy MS
channel sections including curing and approved joint filler and filling
construction joints and dummy joints with approved joint filler and
primer including rouding of the edges and filling the grooves10x25mm
deep at top for construction joints and 10mmx50mm deep at top for
dummy joints with joint sealing compound (conforming to grade B of IS
1834) including making necessary arrangements for expansion joints
etc. all complete with readymix concrete.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

455 Extra for providing and mixing hard crete of approved quality as per 34 ltr 33.70 1145.80
manufactures specification in cement concrete
456 providing and fixing in position pre moulded joint filler in expansion 34 per cm 2.00 68.00
joints depth cm
width per
in length

457 Providing and laying in position bitumen hot sealing compoud for
expansion joints etc
457.1 Using grade A sealing compound 34 per cm 1.10 37.40
depth cm
width per
in length

458 Painting runway/ taxi track/ apron marking with adequate no of coats
to give uniform finish with road marking paint of superior make as
approved by the engineer in charge i/c cleaning the surface of all dirt
scales oil grease and other foreign material etc., and lining out
complete

458.1 New work (two or more coats) 34 sqm 70.15 2385.10

458.2 Old work( one or more coats) 34 sqm 43.10 1465.40
459 Painting raod surface marking with adequate no of coats to give
uniform finish with ready mixed road marking paint conforming to IS
164 on bitumious surface in white / yellow shade including cleaning
the surface of all dirt scales oil grease and foreign material etc.
complete

459.1 New work (two or more coats) 34 sqm 58.10 1975.40

459.2 Old work( one or more coats) 34 sqm 37.40 1271.60
460 making bell mouth opening/ entrance of size 100x50x50cm for 34 each 695.15 23635.17 Cement / Steel will be issued free of
drainage pipe under footpath including providing cement concrete cost from BHEL Stores
1:3:6( 1cement 3 coarse sand 6 grade stone aggregate 20mm nominal
size) for shape of bell mouth including plastering providing and fixing
precast RCC/SFRC slab including plastering with cement mortar 1:3(
1 cement 3 fine sand ) of 6 mm thickness on exposed surface of the
slab and bell mouth including centring shuttering and neat cement
punnig inside the bell mouth etc. all completee

461 Providing and fixing glow studs of size 100x20mm made of heavy duty 34 each 536.60 18244.40
body shall be mouled ASA (acrylic styrene acryloretrite) or HIP (high
impact polystyrene ) or ABC having electronically welded micro
prismatic lens with abrasion resistant coating as approved by engineer
in charge. the cats eye shall support a load of 13635kg tested in
accordance with ASTM D 4280. the slope of retro- reflective surface
shall be 35 +/-5 degress to base. the reflective panels on both sides
with at least 12cm of reflective area up each side. the luminance
intensity should be as per the specification and shall be tested as
described in ASTM I:809 as recommended in BS 873 part 4 :1973. the
studs shall be fixed to the road surface using the adhesive conforming
to IS as per procedure recommended by the manufacturer complete
and as per direction of engineer in charge

462 preparation of sub base road pavement with commerial dry lime
(slaked) fly ash stabilised soil with a mix of 3% lime 12% fly ash and
85% local suitable soil by weight so as to achieve minimum field CBR
of 20 including mixing rolling with road rolling with road roller curring
etc. all complete

462.1 minimum thickness 15cm 34 cum 323.20 10988.80

463 Providing and fixing precast lime fly ash concrete blocks 1:2:6( 1 lime 2 34 cum 3112.16 105813.44 Cement / Steel will be issued free of
fly ash 3 coarse sand 6 grade stone aggregate 20mm nominal size) cost from BHEL Stores
including finishing with 10mm thick cement mortar 1:3( 1cement 3
coarse sand ) in foot paths including preparation of sub grade with a
hand rammer laying 10mm thick leveling course of fine sand (jamuna
sand) and filling the joints with fine sand

464 Providing and fixing concertina coil fencing with required dia 34 mtr 180.25 6128.50
610mm(having 15nos round per 6metre length ) up to 3m height of
wall with existing angle iron Y shape placed 2.4m or 3.00m apart and
with 9 horizontal RBT stud tied with GI staples and GI clips to retain
horizontal including necessary bolts or GI barbed wire tied to angle
iron all complete as per direction of engineer in charge with reinforced
barbed tape(RBT) / spring core (2.5mm thick) wire of high tensile
strength of 165kg/ sqmm with tape (0.52mm thick ) and weight
43.478gm / metre (cost of MS angle CC blocks shall be paid
separately)

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

465 Manufacturing supplying and fixing retro reflective sign boards made
upof 2mm thick aluminium sheet, face to be fully covered with high
intensityencapsulated type heat activated retro reflective sheeting
conforming totype - IV of ASTM-D 4956-01 in blue and silver white or
other colourcombination including subject matter, message (bi-
lingual), symbols andborders etc. as per IRC ; 67:2001, pasted on
substrate by an adhesivebacking which shall be activated by applying
heat and pressureconforming to class -2 of ASTM-D-4956-01 and
fixing the same withsuitable sized aluminium alloy rivets @ 20 cm c/c
to back support frameof M.S. angle iron of size 25x25x3 mm along with
theft resistantmeasures, mounted and fixed with 2 Nos. M.S. angles of
size 35x35x5mm to a vertical post made up to M.S. Tee section ISMT
50x50x6 mmwelded with base plate of size 100x100x5 mm at the
bottom end andincluding making holes in pipes, angles flats, providing
& fixing M.S.message plate of required size steel work to be painted
with two or morecoats of synthetic enamel paint of required shade and
of approved brand& manufacture over priming coat of zinc chromate
yellow primer (verticalMS-Tee support to be painted in black and white
colours).Backside of aluminium sheet to be painted with two or more
coats of epoxy paint overand including appropriate priming coat
including all leads and lifts etc.complete as per drawing , specification
and direction of Engineer--in-charge

465.1 Mandatory / Regulatory sign boards of 900mm dia metre with part as 34 sqm 3776.45 128399.30
length of 3750mm
465.2 cautionary / warning sign boards of equilateral triangular shape 34 sqm 2616.55 88962.70
having each side of 900mm with support length of 3650mm
466 Manufacturing supplying and fixing retro reflective overhead signage 34 sqm 4017.75 136603.50
boards made up of 2mm thick aluminium sheet face to be fully
coveredwith high intensity and encapsulated lens type heat activated
retroreflective sheeting conforming to type - III of ASTM-D-4956-01
asapproved by Engineer-in-charge letters, borders etc. as per IRC : 67-
2001 in silver white with blue colour back ground and with high
intensitygrade, pasted on substrate by pressure sensitive adhesive
backing whichshall be activated by applying pressure conforming to
class II of ASTM-D-4956-01 and fixing the same to the plate of
structural frame work bymeans of suitable sized aluminium alloys,
rivets or bolts & nuts @ 300mm centre to centre all along the periphery
as well as in two vertical rowsalong with theft resistant measures
including the cost of painting with twoor more coats of epoxy paint in
grey colour on the back side of aluminiumsheet including appropriate
priming coat. The rate includes the cost ofrounding off the corners,
lowering down the structural frame work fromthe gantry, fixing and
erecting the same in position all complete as perdrawings, specification
and direction of the engineer-in-charge.(Structuralframe work
including M.S. plate to be provided separately. Rectangulararea of the
sheet only shall be measured for payment).

467 Providing Retro-reflective regulatory sign board of size 900mm dia metermade 34 sqm 4117.10 139981.40
out of 2mm thick aluminium sheet, face to be fully covered withhigh intensity
encapsulated lens type retro -reflective sheeting asapproved by Engineer-in-
charge . Letter, symbols, borders etc. will be asper IRC - 67 with required
colour scheme on the boards and with the highintensity grade A. The
aluminium sheet to be riveted to M.S. frame ofangle iron of size 40x40x4mm
The boards will be fixed to 1 No. 50x50mmsquare post made of M.S. angle
50x50x4m, 4m long welded to the framewith adequate anti-theft arrangement
.Sheet work to be painted with twoor more coats of synthetic enamel paint over
an under coat (primer) andback side of aluminium sheet to be painted with two
or more coats ofepoxy paint including appropriate priming coat complete in all
respects asper direction of Engineer-in-charge.

468 Providing and applying 2.5mm thick road marking strips (retro 34 sqm 497.30 16908.20
reflective) of specified shade / colour using hot thermoplastic material
by fully / semi automatic thermoplastic paint applicator machine fitted
with profile shoe glass beads dispenser propane tank heater and profile
shoe heater driven by experienced operator on road surface
includingcost of material labour T& P cleaning the road surface of all
dirt seals oil grease and foreign material etc. complete as per direction
of engineer in charge and accordance with applicable specification

469 Providing and laying and making kerb channel 30cm wide and 50mm 34 mtr 127.54 4336.43 Cement / Steel will be issued free of
thick of cement concrete 1:3:6(1 cement 3 coarse sand 6 grade stone cost from BHEL Stores
aggregate 20mm nominal size) over 75mm bed of dry brick ballast
40mm nominal size well rammed and consolidated and grouted with
fine sand encluding finishing the top smooth etc. complete as per
direction of engineer incharge

470 providing and laying 75mm thick compacted bed of dry brick aggregate 34 sqm 63.15 2147.10
of 40mm thick nominal size including spreading well ramming
consolidating and grounting with jamuna sand including finishing
smooth etc. complete as per direction of engineer incharge

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

471 providing and fixing post delineators (made of ABS body fitted with 2 34 each 786.35 26735.90
nos 100mm dia) reflective and reflectors are mounted on MS pipe of
65mm dia dully power coated anti rust and theft steel not to be
installed as per direction of engineer in charge

472 Excavating holes upto 0.10 cum including getting out the excavated
soil then returning the soil as deported in layers not exceeding 20cm in
depth including consolidating and deposited layer by ramming
watering etc. disposing of surplus excavated soil as directed with in a
lead of 50mm and lift upto 1.5m

472.1 all kinds of soil 34 each 10.85 368.90

473 Providing and fixing at or near ground level factory made RCC 34 sqm 304.45 10351.15 Cement / Steel will be issued free of
pavement slab of M-30 grade of size 450x450x50mm (HPL or cost from BHEL Stores
equivalent ) including reiforcement with 6mm dia MS bars 4nos each
side including setting in position in footpath to the required level and
line over a bed of 20mm average thick cement mortar ( 1cement 3
coarse sand) having thickness not more than 5mm except on curve
including filling of joints with same cement mortar and making grooves
etc. complete as per direction of engineer in charge

474 providing and laying 60mm thick factory made cement concrete 34 sqm 345.45 11745.30
interlocking paver block of M-30 grade made by block making machine
with strong vibratory compaction and of approved size and design /
shape laid in required colour and pattern over and including 50mm
thick compacted as per the direction of engineer in charge

475 Providing and laying at or near ground level factory made kerb stone of 34 cum 4221.31 143524.54 Cement / Steel will be issued free of
M-25 grade cement in position to the required line level and curvature cost from BHEL Stores
jointed with cement mortar 1:3( 1 cement 3 coarse sand ) including
making joints with or without grooves (thickness of joints expect at
sharp curve shall not to more than 5mm ) including making drainage
opening wherever required complete etc. as per direction of engineer
incharge(lenght of finished kerb edgeing shall be measured for
payment ) precast CC kerb stone shall be approved by engineer in
charge

476 Providing and fixing GI chain link fabric fencing of required width in
mesh size 50x50mm including strengthening with 2mm dia wire or
nuts bolts and washers as required complete as per the direction of
engineer in charge

476.1 made of GI wire of dia 4mm 34 sqm 373.45 12697.30

476.2 made of GI wire of dia 4mm PVC coated to achieve outer dia not less 34 sqm 403.95 13734.30
than 5mm in required colour and shade
477 Providing and fixing GI chain link fabric fencing of required width in 34 sqm 464.95 15808.30
mesh size 25x25mm including strengthening with 2mm dia wire or
nuts bolts and washers as required complete as per the direction of
engineer in charge

478 Supplying and stacking of hard stone (for stone pitching ) 22.5cm thick 34 cum 458.35 15583.90
at site
479 Dry stone pitching 22.5mm thick laid in courses and required profile 34 sqm 96.60 3284.40
with hammer dressed stones having no side less than 15cm with
minimum depth of 20cm including preparing the beding surfaces ect,
all complete(payment for stone to be made separately)

480 75mm thick back filling for pitching including supplying of required
materials and consolidation etc. complete with
480.1 moorum 34 sqm 34.45 1171.30
480.2 stone aggregate 20mm nominal size 34 sqm 69.05 2347.70
480.3 Stone aggregate 40mm nominal size 34 sqm 65.10 2213.40
481 Providing and laying CC pavement of mix M25 with ready mixed 34 cum 4471.25 152022.50
concrete from batching plant . The ready mixed concrete shall be laid
and finished with screed board vibrator vacum dewatering process and
finally finished by floating brooming with wire brush etc. complete as
per specification and directions of engineer in charge (the panel
shuttering work shall be paid for separately)

481.1 Deduct for using of M20 grade concrete instead of M25 grade concrete 34 cum 147.30 5008.20
in CC pavement
482 Scarifying the existing bitumen road surface to a depth of 50mm and 34 sqm 2.60 88.40
disposal of scarified material within all lifts and lead upto 1000mtr (by
mechanical means)
483.1 Providing and laying Bituminous Macadam on prepared suface with 34 cum 5779.81 196513.54
specified graded crushed stone aggregate for profile corrective base/
binder course including loading of agregate with F.E. loader, hot
mixing of stone aggregates and bitumen in hot mix plant, transporting
the mixed material by tippers to paver and laying the mixed material
with paver finisher fitted with electronic sensing device to the required
level and grade and rolling with road rollers, as per MORTH
specification to achieve the desired density and compaction ( but
excluding the cost of primer/ tack coat) for an average thickness of
50mm/ 75mm average compacted thickness with bitumen of 60/70
grade @ 3.5% (Percentage by weight of total mix) etc. complete all as
directed by Engineer-in-charge.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

483.2 2.5cm premix carpet surfacing with 2.25 cu.m and 1.12cu.m of stone 34 sqm 135.80 4617.20
chippings of 13.2mm and 11.2mm size respectively per 100 sq.m and
52 kg and 56kg of hot bitumen per cu.m of stone chippings of 13.2mm
and 11.2mm size respectively including a tack coat with hot straight
run bitumen including consolidtion with road roller of 6 to 9 tonne
capacity etc complete (tack coat to be paid for separately) with paving
Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt.

483.3 Providing and applying tack coat using bitumen emulsion (Rapid 34 sqm 13.22 449.48
Setting) complying with IS 8887-1995, spraying the bitumen emulsion
with mechanically operated spray unit, cleaning and preparing the
existing road surface as per specifications. On bituminous surface @
0.25 kg/sqm.

HORTICULTURE WORKS
484 Trenching in ordinary soil up to a depth of 6cm including removal and 34 cum 16.95 576.30
stacking of serviceable materials and then disposing of by spreading
and neatly leveling with in a lead of 50m and making up the trenched
area to proper levels by filling with earth mixed with sludge or / and
manure before and after flooring trench with water (excluding cost of
imported earth sludge or manure)

485 Supplying and stacking of good earth at site including royalty and 34 cum 144.05 4897.70
carriage up to 1 km (earth measured in stacks will be reduced by 20%
for payment)
486 Supplying and stacking of good earth at site including royalty and 34 cum 136.85 4652.90
carriage up to 1 km (earth measured in stacks will be reduced by 8%
for payment)
487 Supplying and stacking at site dump manuere from approved source
including carriage up to 1 km (earth measured in stacks will be
reduced by 8% for payment)
487.1 Screemed through sieves of IS designation 20mm 34 cum 82.90 2818.60
487.2 Screemed through sieves of IS designation 16mm 34 cum 90.75 3085.50
487.3 Screemed through sieves of IS designation 4.75mm 34 cum 97.05 3299.70
488 Rough dressing the trenched ground including breaking clods 34 100sqm 33.05 1123.70
489 Uprooting weeds from the trenched area after 10 to 15 days of its 34 100sqm 106.85 3632.90
flooring with water including disposal of uprooted vegetation
490 Fine dressing the ground 34 100sqm 80.20 2726.80
491 Spreading of sludge, dump manure or / and good earth in required 34 cum 11.60 394.40
thickness (cost of sludge, dump manure or / and good earth to be paid
separately)
492 Mixing earth and sludge or manure in proportion specified or directed. 34 cum 7.85 266.90

493 Grassing with doob grass including watering and maintenance of the
lawn for 30 days or more till the grass forms a thick lawn free from
weeds and fit for mowing including supplying good earth if needed ( the
good earth shall be paid for separately)

493.1 In rows 15cm apart in either direction 34 100sqm 121.00 4114.00

493.2 in rows 7.5cm apart in either direction 34 100sqm 251.25 8542.50
493.3 in rows 5cm apart in either direction 34 100sqm 384.85 13084.90
494 Renovating lawns including weeding cheeling the grass forking the 34 100sqm 741.50 25211.00
ground top dressing with sludge or manure mixing the same with
forked soil watering and maintaining the lawn for 30 days or more till
the grass forms a thick lawn free from weeds and fit for mowing and
disposal of rubbish as directed including supplying good earth if
needed but excluding the cost of sludge or manure( the good earth
shall be paid for separately)

495 Uprooting rank vegetation and weeds by digging the area to a depth of 34 100sqm 1318.20 44818.80
60cm removing all weeds and other growth with roots by forking
repeatedly breaking clods, rough dressing flooring with water uproofing
fresh growths after 10 to 15 days and then fine dressing for planting
new grass including disposal of all rubbish with all leads and lifts.

496 Preparation of beds for hedging and shrubbery by excavating 60cm 34 cum 47.90 1628.60
deep and trenching the excavated base to a further depth of 30cm
refilling the excavated earth after breaking clods and mixing with
sludge or manure in the ratio of 8:1( 8 parts of stacked volume of earth
after reduction by 20% one part of stacked volume of sludge or manure
after reduction by 8%), flooring with water filling with earth if
necessary watering and finally fine dressing leveling ect. including
stacking and disposal of material declared unserviceable and surplus
earth by spreading and leveling as directed within a lead of 50m lift
upto 1.5m complete (cost of sludge, manure or extra earth to be paid
for separately)

497 Digging holes in ordinary soil and refilling the same with the excavated
earth mixed with manure or sludge in the ratio of 2:1 by volume ( 2
parts of stacked volume of earth after reduction by 20% :1 part of
stacked volume of manure after reduction by 8% ) flooring with water
dressing including removal of rubbish and surplus earth., if any with
all leads and lifts ( cost of manure sludge or extra good earth if needed
to be paid for separately)

497.1 Holes 1.2 m dia and 1.2m deep 34 each 146.65 4986.10
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

497.2 Holes 60cm dia and 60cm deep 34 each 19.25 654.50
498 Half brick circular tree guard in 50 class designation bricks internal
diameter 1.25meter and height 1.2 meter above ground and 0.20m
below ground bottom two course laid dry and top three courses in
cement mortar 1:6( 1 cement 6 fine sand ) and the intermediate
courses being in dry honey comb masonry as per design complete

498.1 with FPS bricks 34 each 146.16 4969.42

499 Providing and fixing MS flat iron tree guard 60cm dia. And 2 m height 34 each 1592.10 54131.40
above ground level formed of 4 nos. 25x6mm and 8 nos. 25x3mm
vertical MS flats rivetted to 3 nos. 25x6mm MS flat iron rings in two
halves bolted together with 8mm dia. And 30mm long bolts including
painting two coats with paint of approved brand and manufacture over
a coat of priming complete in all respects

500 Making tree guard 53cm dia and 1.3m high as per design from empty
coal tar drums supplied free by the department including providing
and fixing 2nos MS sheet rings 50x0.5mm with rivets complete in all
respects including painting insides and outside of tree guard with

500.1 A coat of coal tar 34 each 104.00 3536.00

500.2 Two or more coats of synthetic enamal paint of approved quality shade 34 each 187.15 6363.10
over a priming coat
501 Making tree guard 53cm dia and 2 m high as per design from empty
coal tar drums supplied free by the department including providing
and fixing four legs 40cm long of 30x3mm MS flat riveted to tree guard
and providing and fixing 2 nos MS sheet rings 50x0.5mm with rivets
complete in all respects including painting inside and outsie of tree
guard with

501.1 A coat of coal tar 34 each 220.15 7485.10

501.2 Two or more coats of synthetic enamal paint of approved quality shade 34 each 348.85 11860.90
over a priming coat
502 Edging with bricks laid dry length wise including excavation refilling
consolidating with hand packing and spreading neatly surplus earth
within a lead of 50 m
502.1 75 class designation
502.2 FPS bricks 34 mtr 15.05 511.70
502.3 50 class designation
502.4 FPS bricks 34 mtr 13.85 470.90
503 Filling mixture of earth and sludge or manure in the desired proportion 34 cum 3.95 134.30
in trenches, flooring with water and leveling (cost of supplying earth
and sludge or manure and mixing excluded)
504 Excavation in dumped stones or malba including stacking of 34 cum 109.95 3738.30
serviceable and material separately and disposal of unseviceable
material lead up to 50m and lift up to 1.5m disposed material to be
neatly dressed.

505 Excavation in bajri path including stacking of serviceable and 34 cum 122.55 4166.70
unserviceable material lead up to 50m and lift up to 1.5 m disposed
material to be neatly dressed
506 Excavation in water bound macadam road including stacking the 34 cum 150.80 5127.20
serviceable material lead up to 50m and lift up to 1.5m disposed
material to be neatly dressed
507 Flooding the ground with water including making kiaries and 34 100sqm 68.40 2325.60
dismantling the same
508 Grass cutting including light jungle, collection of stones, disposing, 34 SQM 0.75 25.50
the cut grass and light jungle to places as directed by the Engineer-in-
charge. The rate quoted shall include the cost of cutting, cleaning,
loading, conveyance within a lead of 2 KM to places as directed and
spreading etc complete.

509 Cutting the hedges around the quarters and public buildings with big 34 One 3.00 102.00
scissors, knives etc including clearing and disposing the cut waste Cum
within a lead of 2 km all as directed by the Engineer-in-charge. The
waste materials shall be cleared on the same day and the rate shall
include all tools, transport etc.

510 Uprooting and clearing parthinium and other weeds with big scissors, 34 One Sqm 1.16 39.44
knives etc including clearing and disposing the cut waste within a lead
of 2 km all as directed by the Engineer-in-charge. The waste materials
shall be cleared on the same day and the rate shall include all tools,
transport etc.

511 Cleaning jungle including uprooting of rank vegetation, grass brush 34 one cum 2.64 89.76
wood, trees and saplings of girth up to 30 cm measured at a height of
1 m above ground level and removal of rubbish up to a distance of 5
Km outside the periphery of the area cleared etc complete all as
directed by Engineer-in-charge.

512 Arresting the growth of trees along the walls of the buildings in 34 each 200.00 6800.00
Township by applying gylcil with ammonia od required quantity till tree
is dried and removing the dried tree along with roots and dispoting off,
upto 2 KM lead etc complete as directed by Engineering - in - charge.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

513 Cutting of tree branches over buildings at more than 6 meters height
and removing other kind of branches from the cut branch and stocking
as directed by the Engineer-in-charge within a lead of 3 kms (separate
payment will be made for transporting the tree branches from site to
BHEL Nursery stockyard).

513.1 100 to 200 mm girth with its braches. 34 Each 34.20 1162.80
513.2 above 200 mm girth with its braches. 34 Each 56.60 1924.40

PROVIDING MACHINARY
514 Supply of JCB 55 Per Hour 750.00 41250.00
515 Supply of Tractor with ripper / Trolley 55 Per Day 1000.00 55000.00
516 Supply of Tractor with hydraulic Lift with 4 USW 55 Per Day 2672.00 146960.00
517 Supply of water Tanker 55 Per Day 800.00 44000.00
518 Supply of Kambi Series/ Machine for de-silting or De-choking or 55 Per Day 15000.00 825000.00
Removal of silt

MISCELANEOUS WORKS
519 Cleaning and removing all un wanted things from the roof terrace 40 One Sqm 1.15 46.00
of various buildings at an elevated level of 12 to 20 metre from FFL.
Rate includes labour, tools, wire brush, brooms, baskets etc., sweeping
and clearing off all dirt, silt, dust, leaves and other foreign matters etc,
with out damaging the terrace treatment and thereby collecting all the
wastes in bags / casketc, lowering to ground floor with out affecting
the working environment and dumping the same in the near by dust
bins / earmarked areas / low lying areas etc complete. Sweeping has
to be done only as and when necessary. Payment will be made only for
the areas where actually the job was carried out.

520 Cleaning of water tanks of various sizes using minimum 150 gms 40 Each 33.00 1320.00
cleaching powder for each tank of any number of parts including cost Tank
of bleaching powder. (The agency shall make his own arrangements
for tools required and shall repair and replace the ball cocks damaged
while cleaning).

521 Fixing barbed wire fencing to the RCC poles / MS angles horizontally 40 One Rmt 3.73 149.28 Barbed wire is issued free of cost
and diagonally with GI binding wire including cost of fixing materials. from BHEL Stores
The payment shall be mad for running length of each row of fencing
and including tightening the loose barbed wire wherever necessary.
The barbed wire shall be supplied free of cost at BHEl stores.

522 Erection RCC poles/M.S angles posts in position by coveying the 40 Each 32.98 1319.20
same to the places as directed.
523 Upkeeping of play fields by sweeping the areas neatly, watering, 40 One Sqm 0.35 14.00
spreading screened murram, rolling with hand driven roller etc
complete as instructed
524 Carrying the earth / gravel from stacks to the areas of filling, 40 One Cum 18.00 720.00
spreading in layers of 150 mm thick watering, ramming and
consolidation with power roller of required capacity so as to bring the
surface to proper line, level camber and grade etc complete as directed
by Engineer-in-charge

525 Labour charges for fixing of chain link mesh with a required tools etc 40 Sqm 20.00 800.00 Chain link mesh will be free supply
complete all as directed by Engineer-in-charge. The required binding by BHEL.
wire or any materials will be arranged by the BHEL.

526 Larvacidal treatment at all the breeding places with required 40 one month 6600.00 264000.00
periodicity covering areas as per Annexure-I atleast once in a week, in
and around the township and with in the period of mosquito life cycle
to arrest the reoccurrence of breeding using specified chemicals such
as Baytex 1000 / M.L. Oil / Pyrethurm emulsion in a proper effective
dosage for knock down and preventive treatments all as directed.

527 Fogging the entire township with diesel mixed pyrethurn 2% extract 40 One 7700.00 308000.00
during the mosquito density season for the destruction of adult operation
mosquitoes during the migration time at the open areas around the
residential and non-residential buildings checking the entry into the
houses and functional buildings all as directed (Van foggers /
approved movable foggers, four numbers must be used during
operation to cover the entire township in four days).

528 Fogging in General Hospital premises in township with diesel mixed 40 One 2000.00 80000.00
pyrethurn 2% extract during the mosquito density season for the operation
destruction of adult mosquitoes during the migration time at the open
areas around the residential and non-residential buildings checking
the entry into the houses and functional buildings all as directed (Van
foggers / approved movable foggers, four numbers must be used
during operation to cover the entire township in four days).

529 General anti-mosquito / insecticidal spray for destruction of all kinds 40 nos 1.00 40.00
of insects such as mosquitoes, cockroaches, bed bugs, cateerpillars
and lizards etc, with alternate usage of safe chemicals formulations of
Baygon concentrate, Malathion, Nuvan, Cypermachine, Feneveirate,
Deltamethrine and Pyrethrine basing on the immunity level of the pest
all as directed for residential buildings.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

530 General anti-mosquito / insecticidal spray for destruction of all kinds 40 each 5.00 200.00
of insects such as mosquitoes, cockroaches, bed bugs, cateerpillars
and lizards etc, with alternate usage of safe chemicals formulations of
Baygon concentrate, Malathion, Nuvan, Cypermachine, Feneveirate,
Deltamethrine and Pyrethrine basing on the immunity level of the pest
all as directed for non-residential buildings.

531 General anti-mosquito / insecticidal spray for destruction of all kinds 40 each 750.00 30000.00
of insects such as mosquitoes, cockroaches, bed bugs, cateerpillars
and lizards etc, with alternate usage of safe chemicals formulations of
Feneveirate, Deltamethrine and Pyrethrine basing on the immunity
level of the pest covering General Hospital Male ward, Female ward,
Surgical ward, Gynac ward, All special rooms 12 nos, New OPD 1st
floor and ground floor, Old OPD, Isolation ward, Labs, Operation
threator, children ward, Stores area, open pockets with in the premises
and all office rooms etc complete, all as directed by Engineer-in-
charge.

531.1 Antitermite treatment to the infected wooden items such as doors, 40 one sqm 1.50 60.00
windows, ventilators, ward robes etc in residential buildings.

531.2 Antitermite treatment to infected walls and floor joints in residential 40 one sqm 1.50 60.00
and non-residential buildings.
531.3 Antitermite treatment to infected open areas around trees and plants. 40 one sqm 1.50 60.00

352 Treatment and destruction of white ants, nest hills built in the open 40 nos 2.00 80.00
areas of the township including the disposal of excavated earth to the
places and filling with the other pit to be made to the extent for
removal of queen nest shown to the department for a check.

533 Treatment to the bandicoot holes and destruction of bandicoots by 40 nos 2.00 80.00
applying radent treatment and eradicating the bandicoot menance
completely.
534 Removing beehive of any size carefully in all levels at stage beams, 40 nos 390.00 15600.00
columns, slabs, ladders etc., in the over head tank or other buildings /
structures etc. While removing beehive, the contractor should follow
all safety rules & regulations, all as per instructions of Engineer-in-
charge.

535 Treatment for eradication of rat menance in buildings by applying 40 each 4.00 160.00
radent treatment and providing trapes if necessary.
536 Destruction of stray dogs found in the township area by applying 40 nos 10.00 400.00
poisions as prescribed and explained by the department supervisor
concerned including the dispisal of dead animal by way of collection,
carrying and burying them in a scientific way at the places as directed
by the department including cost of materials and machinery required
etc for stray dogs.

537 Removing of silt and debris from the open drains and removing and 40 One Rmt 5.32 212.80
replacing of approach paths wherever required to remove the silt
underneath the approach paths, including loading, unloading and
conveyance to a distance of 2 kms and spreading at the places as
directed by the Engineer-in-charge.

538 Removal of silt, debris and vegetation growth from the nallahs
including loading, unloading and conveyance to a distance of 2 kms
and spreading at the places as directed by the Engineer-in-charge.

538.1 Bed width upto 5M 40 One Rmt 72.00 2880.00

538.2 Bed width upto 10M 40 One Rmt 144.00 5760.00
539 Removing silt and debris from the R.C.C hume pipes of all dia. 40 One Rmt 33.96 1358.40
Provided at the approches to residential and non-residential buildings,
etc.,
540 Supply of SFRC Medium Duty Approach Slabs for open drains
including transportation and placing at one location etc complete all as
directed by Engineer-in-charge.
540.1 Size 1000 x 600 x 60 mm 40 No 933.00 37320.00
540.2 Size 1200 x 600 x 60 mm 40 No 1117.00 44680.00
REPAIRS TO FURNITURE
541 Recaning of chairs.
541.1 Recaning of ordinary chair back rest 20 Each 140.00 2800.00
541.2 Recaning of ordinary chair seat 20 Each 140.00 2800.00
541.3 Revolving chair back rest. 20 Each 188.33 3766.67
541.4 Revolving chair seat. 20 Each 190.00 3800.00
541.5 On bed support back rest. 20 Each 100.00 2000.00

542 Repairs to steel tubular chairs.

542.1 Re-fitting with new screws, bolt & nuts. 20 Each 66.67 1333.33
542.2 Supply and fixing of new back rest. 20 Each 266.67 5333.33
542.3 Supply and fixing of new seats 20 Each 266.67 5333.33
542.4 Supply and fixing of chair wooden arm rest. 20 Each 66.67 1333.33
542.5 Supply and fixing of rubber shoes. 20 Each 8.33 166.67
542.6 Supply and fixing of chair end caps 20 Each 4.00 80.00

543 Revolving, High back, Cushion chairs.

543.1 Servicing / Repairing of revolving chairs. 20 Each 56.67 1133.33
543.2 Re-fitting with new screws, bolt & nuts. 20 Each 56.67 1133.33
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

543.3 Welding of revolving / High back chair 20 Each 166.67 3333.33

543.4 Supply and fixing of revolving chair castor wheels. 20 Each 100.00 2000.00
543.5 Supply and fixing of High back chair gas lift. 20 Each 1000.00 20000.00
543.6 Supply and fixing of High back chair bush 20 Each 150.00 3000.00
544 Steel table
544.1 Servicing / Repairing of table. 20 Each 100.00 2000.00
544.2 Supply and fixing of table locks. 20 Each 375.00 7500.00
544.3 Supply and fixing of table handle. 20 Each 50.00 1000.00
544.4 Supply and fixing of rubber shoes. 20 Each 8.33 166.67

545 Steel Alamarahs

545.1 Servicing / repairing of alamarah 20 Each 100.00 2000.00
545.2 Supply and fixing of alarmarah locks. 20 Each 350.00 7000.00
545.3 Supply and fixing of alarmarah handles. 20 Each 196.67 3933.40
545.4 Supply and fixing of almerah shelf hooks 20 Each 20.00 400.00
545.5 Minot denting and welding of alamarah 20 Each 100.00 2000.00
545.6 Supply and fixing of licking rod and lever set 20 Each 150.00 3000.00
545.7 Supply and fixing of alamarah floor legs 450 x 125 mm height x 100 20 Sets 350.25 7005.00
mm width.

546 Opening of Locked steel furniture a such as tables, alarmarah etc. 20 Each 200.00 4000.00
without damaging the furniture.

547 Manufacturing and supplying duplicate keys 2 Nos. suitable to existing 20 Pairs 130.00 2600.00
locks (as per measurements to a oblained form the lock)

548 Repairing of bed side lockers and welding. 20 Each 50.00 1000.00

549 Supply and fixing of bed side locker and handles. 20 Each 150.00 3000.00

550 Repairing and weliding of steel cots. 20 Each 250.00 5000.00

551 Cutting of hospital bed legs x uniform height and providing shoes to 20 Each 50.00 1000.00
legs of various sizes.

552 Supply and fixing of steel cot nut and bolt fixing. 20 Each 20.00 400.00

553 Servicing / Repairing flower bed cot / decolum flower cot. 20 Each 350.00 7000.00

554 Supply & fixing Rubber Shoes / of aspectic furniture, cots etc.
554.1 1/2" to 3/4" dia pipe shoes. 20 Each 10.00 200.00
554.2 3/4" to 1" dia pipe shoes. 20 Each 15.00 300.00
554.3 1" to 1 1/2" dia pipe shoes. 20 Each 21.33 426.67

555 Reparing the teak wood furniture and making them good to use
including cost of all materials etc., complete as directed.
555.1 Teak wood armless chairs. 20 Each 15.00 300.00
555.2 Teak wood chairs with arms. 20 Each 20.00 400.00
555.3 Teak wood sitting benches. 20 Each 30.00 600.00
555.4 Teak wood stools. 20 Each 20.00 400.00
555.5 Teak wood single desk with benches. 20 Each 25.00 500.00
555.6 Teak wood double desk with benches. 20 Each 25.00 500.00
555.7 Teak wood writing tables of all sizes. 20 Each 30.00 600.00

556 Tightening the joints of wooden furniture items by nails / screws etc, 20 Each 2.00 40.00
including making good for reuse as directed by Engineer-in-charge.

557 Supply and fixing of best teak wood required size (planks, scantling 20 One Cum 50000.00 1000000.00
and reapers).

558 Applying two coats of spray painting to all steel aspetic furniture with
synthetic enamel paint of an approved coloured brand including
scraping surface, cost of all materials etc., complete.
558.1 Almerah (large) 40 Each 1800.00 72000.00
558.2 Almerah (small) 40 Each 1500.00 60000.00
558.3 Office table (Clerk table) 40 Each 638.33 25533.33
558.4 Office table (Jr. Executive table) 40 Each 715.00 28600.00
558.5 Office table (Sr. Executive table) 40 Each 831.67 33266.67
558.6 Steel racks upto 3 feet. 40 Each 331.67 13266.67
558.7 Steel racks upto 8 feet. 40 Each 966.67 38666.67
558.8 Filing cabinet (4 draws) 40 Each 931.67 37266.67
558.9 Filing cabinet (2 draws) 40 Each 400.00 16000.00
558.1 Revolving chair 40 Each 245.00 9800.00
558.11 Tubular chairs 40 Each 125.00 5000.00
558.12 Dining chairs 40 Each 133.33 5333.33
558.13 3 seater PVC tubular guest chair / for pipe only. 40 Each 90.00 3600.00
558.14 Dining table (8 seater for canteen). 40 Each 200.00 8000.00
558.15 Bed side lockers. 40 Each 208.33 8333.33
558.16 Cots (Big) 40 Each 473.33 18933.33
558.17 Cots for children 40 Each 300.00 12000.00
558.18 Cots with decolum flower steel 40 Each 633.33 25333.33
Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

558.19 Flower cots 40 Each 483.33 19333.33

558.2 Cot with cradle 40 Each 525.00 21000.00
558.21 Cradles 40 Each 150.00 6000.00
558.22 Table for Diepensary / Stecture 40 Each 400.00 16000.00
558.23 Examination couch tables 40 Each 358.33 14333.33
558.24 Laboratory table (big) 40 Each 250.00 10000.00
558.25 Dispensary wheel chair 40 Each 100.00 4000.00
558.26 Instrumental cabinet (big) 40 Each 483.33 19333.33
559
559.1 Instrucmental cabinet (small) 40 Each 300.00 12000.00
559.2 Bed side screens 40 Each 75.00 3000.00
559.3 I.V.stands 40 Each 71.67 2866.67
559.4 Foot steps 40 Each 56.67 2266.67
559.5 Back rest 40 Each 25.00 1000.00
559.6 Walker stand 40 Each 25.00 1000.00
559.7 Wash basin stand 40 Each 25.00 1000.00
559.8 Oxygen cylinderstand 40 Each 75.00 3000.00
559.9 Medicine trolley 40 Each 133.33 5333.33
559.1 Dressing trolley 40 Each 133.33 5333.33
559.11 Baby trolley 40 Each 100.00 4000.00
559.12 Dental eash chairs 40 Each 100.00 4000.00
559.13 Revolving stools 40 Each 66.67 2666.67
559.14 Canteen big trolley 40 Each 500.25 20010.00

560 Apply two coats of synthetic enamel paint to old wood work and
furniture.
560.1 Tables / Dining tables 35 Each 216.67 7583.33
560.2 Table / Dining table (big) 35 Each 250.00 8750.00
560.3 Bench with wooden back 35 Each 283.33 9916.67
560.4 Foot steps 35 Each 75.00 2625.00
560.5 Stools 35 Each 75.00 2625.00
560.6 Physiotherapy table 35 Each 200.00 7000.00
560.7 Long benches (Big) 35 Each 216.67 7583.33
560.8 Cane easy chairs. 35 Each 100.00 3500.00
560.9 Wooden alamaraih 35 Each 500.00 17500.00

561 Apply two coats of polishing with shillack or other equivalent brancd
on old wood work furniture items including sand papering, finishing
etc complete all as directed by Engineer-in-charge.

561.1 Tables / Dining tables 40 Each 100.00 4000.00

561.2 Wooden long bench 40 Each 100.00 4000.00
561.3 Wooden long bench with back. 40 Each 400.00 16000.00
561.4 Stools 40 Each 75.00 3000.00
561.5 Wooden alamaraih 40 Each 50.00 2000.00
561.6 Foot steps. 40 Each 50.00 2000.00

562 Removing the existing tapestry and restiching the same with new
tapestry of approved colour and quality including attending to repairs,
providing walling, polishing, buffers etc complete including cost of all
materials, cost of 'U' foam, tapestry. The rate shall include the
transportation charges of the furniture.

562.1 Three seater sofa. 25 Each 6436.67 160916.67

562.2 Two seater sofa. 25 Each 4646.67 116166.67
562.3 Single seater sofa. 25 Each 2595.00 64875.00
562.4 Wooden guest cushined chairs. 25 Each 1750.00 43750.00
562.5 Steel tubular guest cushined chairs. 25 Each 1300.00 32500.00
562.6 Revolving high back chair (cusioned). 25 Each 1341.67 33541.67
562.7 Revolving low back chair (cusioned). 25 Each 1208.33 30208.33
562.8 Revolving computer chairs (cusined) 25 Each 1000.00 25000.00

Lettering of Boards and Banners

563 Applying one coat of synthetic enamel paint of an approved brand 30 Sqm 37.40 1122.00
and shade to road surface / kerb stones including cleaning the stones
properly, cost of all materials and labour etc complete synthetic
enamel paint of approved shade and brand to kerb stones etc complete
all as directed by Engineer-in-charge..

564 Applying one coat of synthetic enamel paint of approved brand and 30 Sqm 18.45 553.50
shade to road sign boards including cost of all materials, labour etc
complete all as directed by Engineer-in-charge.
565 Painting the township layout on supplied boards approximate Size 30 Sqm 70.15 2104.50
3.00x1.50 M, as per the layout with different shades indicating the
functional and residential buildings separately and in different colours
for various types, bordering, index preparations, key plan etc, complete
as per the instructions (The paints shall be of synthetic enamel for G.P
of approved make). The rate quoted shall include rubbing the existing
painting surface and cost of all the materials like brushes and
paintsetc complete all as directed by Engineer-in-charge.

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

566 Preparing the supplied boards of different sizes to receive the painting 30 Sqm 628.00 18840.00
as per the drawing and painting the letters of different sizes in different
shapes with synthetic enamel paint of approved make in different
shades as per the instructions. The quoted rate shall include rubbing
of the existing painted surface to receive the new painting and cost of
all materials like brushes, paints etc etc directed by Engineering - in
charge.

567 Providing radium sticker letters and arrow marks of approved colour 30 Sqm 301.07 9032.10
and design and size. The base board will be supplied by the
department and as directed by the Engineer-in-charge.
568 Supply and fixing of multi colour digital printing on paper with 30 Sqm 2105.40 63162.00
lamination on 10 mm M.D.F.Board Supporting with Iron Frame
including all incidential charges etc complete as directed by Engineer-
in-charge etc directed by Engineering - in charge.

569 Supply and fixing of satin cloth flags of 1 mtr x 3 mtrs in size and 30 Nos 21.37 641.10
providing BHEL monogram on the flag including stitching charges,
cost of all materials etc complete all as directed by Engineer-in-charge.

Conveyance
570 Conveyance by Manual or Mechanical means of Lime, Murram,
building Rubbish including loading un-loading with lift of 50 m upto
lead mentoned below all complete all as directed by Engineer in charge

570.1 1 Km 45 Cum 39.53 1778.85

570.2 2 Km 45 Cum 45.13 2030.85
570.3 3 Km 45 Cum 50.66 2279.70
570.4 4 Km 45 Cum 55.99 2519.55
570.5 5 Km 45 Cum 61.19 2753.55
570.6 5.1 Km to 10 Km 45 Cum per 4.67 210.15
Km above
5 Km

570.7 10.1 Km to 20 Km 45 Cum per 3.90 175.50

Km above
10 Km

570.8 Above 20 Km 45 Cum per 3.24 145.80

Km above
20 km

571 Conveyance by Manual or Mechanical means of Earth including

loading un-loading with lift of 50 m upto lead mentoned below all
complete all as directed by Engineer in charge
571.1 1 Km 25 Cum 49.42 1235.50
571.2 2 Km 25 Cum 56.41 1410.25
571.3 3 Km 25 Cum 63.32 1583.00
571.4 4 Km 25 Cum 69.99 1749.75
571.5 5 Km 25 Cum 76.48 1912.00
571.6 5.1 Km to 10 Km 25 Cum per 5.84 146.00
Km above
5 Km

571.7 10.1 Km to 20 Km 25 Cum per 4.88 122.00

Km above
10 Km

571.8 Above 20 Km 30 Cum per 4.05 121.50

Km above
20 km

572 Conveyance by Manual or Mechanical means of Manure or sludge

including loading un-loading with lift of 50 m upto lead mentoned
below all complete all as directed by Engineer in charge

572.1 1 Km 20 Cum 42.97 859.40

572.2 2 Km 20 Cum 49.05 981.00
572.3 3 Km 20 Cum 55.07 1101.40
572.4 4 Km 20 Cum 60.86 1217.20
572.5 5 Km 20 Cum 66.51 1330.20
572.6 5.1 Km to 10 Km 20 Cum per 5.08 101.60
Km above
5 Km

572.7 10.1 Km to 20 Km 20 Cum per 4.24 84.80

Km above
10 Km

572.8 Above 20 Km 20 Cum per 3.52 70.40

Km above
20 km

Contractor
 BHEL Schedule of Rates

SCHEDULE OF RATES

BHEL ITEM DESCRIPTION QUANTITY*** UNIT Contractors AMOUNT Remarks

NO Rate( Rs)

573 Conveyance by Manual or Mechanical means of Excavated rock

including loading un-loading with lift of 50 m upto lead mentoned
below all complete all as directed by Engineer in charge

573.1 1 Km 30 Cum 79.07 2372.10

573.2 2 Km 30 Cum 90.25 2707.50
573.3 3 Km 21 Cum 101.32 2127.72
573.4 4 Km 20 Cum 111.99 2239.80
573.5 5 Km 20 Cum 122.37 2447.40
573.6 5.1 Km to 10 Km 20 Cum per 9.35 187.00
Km above
5 Km

573.7 10.1 Km to 20 Km 40 Cum per 7.80 312.00

Km above
10 Km

573.8 Above 20 Km 43 Cum per 6.48 278.64

Km above
20 km

TOTAL 43 60000004.62
*** NOTE: ALL THE QUANTITIES MENTIONED ARE INDICATIVE. THE QUANTITIES IN INDIVIDUAL ITEMS WILL BE
OPERATED AS PER THE DISCRETION OF ENGINEER - IN- CHARGE

Contractor