Read This First

Creo®: Creo Parametric

10.0.0.0

Directory of Online Information

• Creo Help Centers

• Creo View Clients and Toolkits Software Matrix
• eSupport
• Creo 10.0 Hardware Notes
• Reference Documents
• Technical Support Search
• Update Advisor

• What’s New? Click the link below:

○ Creo Parametric

Copyright 2023 PTC, Inc.

10.0.0.0 Creo®: Creo Parametric
English
Creo Parametric
Creo 10.0.0.0 Is Available for Installation

Creo 10.0.0.0 is a scalable suite of interoperable, right-sized design applications for users
across the enterprise to more easily participate in and contribute to the product design
process. With these applications, companies can bring better products to market faster by
improving processes such as concept design, detailed design, and verification and
validation.
Installation
Creo 10.0.0.0 is packaged with the PTC License Server powered by FlexNet Publisher
11.19.1.0. PTC recommends that you upgrade your PTC License Server.
Windows Update for C Runtime Is Required for Creo 10.0.0.0
Creo 10.0.0.0 is built with Microsoft Visual Studio 2019 (VS2019), which is a compiler
change. The machine on which you are running Creo Parametric must have the Windows
update for C Runtime installed. When installing Creo, the installer detects if the correct
Windows update for C Runtime is installed. This applies both to a local installation and
when installing from a network.
If you do not have the required Windows update, the steps below describe what occurs
and what action you need to take:
1. The message The Windows update for Universal C Runtime is required in order for the
installation to continue. appears during installation and you are redirected to a
Microsoft web page.
2. There is an automatic exit from the installer.
3. Open the Microsoft web page Windows 10 Universal C Runtime.
4. Install the required update.
After you complete the update, you can install Creo 10.0.0.0.

2
Using the Creo Installation Assistant
For Creo 10.0.0.0 and later, use one of the two executables available on your installation
media to launch the Installation Assistant:
1. setup.exe—Launches the Creo Installation Assistant for the following operations:
• Installs or upgrades your Creo installation for the following cases:
○ Uses an existing node locked license file for the installation.
○ Specifies an already installed license server to use.
◆ Specify a license server with the format: 7788@<server_name>.
◆ Specify a triad license server with the format: 7788@<server1_
name>; 7788@<server2_name>; 7788@<server3_name>.
• Reconfigures node locked licenses for an existing installation.
• Generates a node locked license file using an SON (Sales Order Number) for a
node locked license.
2. install_license_server.exe—Launches the Creo Installation Assistant for
the following operations:
• Installs a license server for the following cases:
○ Uses an existing license file.
○ Generates a simple license file to install a single license server using an SON
(Sales Order Number) for a license server.
○ Generates an advanced license file to install a triad license server using an
SON for a triad license server or uses an existing triad server license file.
For the most up-to-date installation information, see the Creo Installation and
Administration Guide on the Reference Documents page or click File ▶ Help ▶ Reference
in the application.
Licensing Alternatives for Existing Customers
Existing customers can alternatively use the online licensing tools to request an updated
license pack via e-mail for installation on an existing PTC License Server. To run Creo
10.0.0.0, your PTC license pack must have updated licenses at version 41.0. See License
Management.

3
G-Post
In addition to the current solution for NC in Creo Parametric 10.0.0.0, there is also
support for G-POST V6.7 P17 from Austin N.C., Inc.
System Requirements and Hardware Certification Information
Visit the Creo 10.0 Hardware Notes page for Creo 10.0.0.0 for current, detailed system
requirements and certified hardware configurations.
PTC Product Release that is Interoperable with Creo
10.0.0.0
Creo Expert Moldbase Creo Expert Moldbase 16.0.0.0
Creo Progressive Die Creo Progressive Die 16.0.0.0
Creo Schematics Creo Schematics 8.0 and later releases.
Creo View Product Family: Creo View Creo View 10.0 and later releases.
and Creo View ECAD, Creo View Note
ECAD Compare, Creo View Express,
• A seat of Creo Parametric is a prerequisite
and Creo View Adapters
for the Adapter.
• For information about the latest (9.1)
Clients and Adapters, see the Creo View
Clients and Toolkits Software Matrix and
the Creo View Adapters Software Matrix
for details.
Windchill Creo 10.0.0.0 is planned to be supported with
Windchill 12.0.2.11 and later, with Windchill
12.1.2.1 and later, and with Windchill 12.2.0.0
and later. See the note that follows.

4
 Note
• For specific information on Windchill compatibility, refer to the Creo Data
Management Compatibility Roadmap.
• Before upgrading from one major release to another of Creo, transfer files from
your workspaces to avoid the loss of any local changes during the process.
• Using Creo 10.0.0.0 and later versions for the publishing of server side viewables
may require the Windchill server to be updated to a minimum CPS level. Refer to
the Creo-Windchill Compatibility document for additional details.

Asian and European Languages

Depending on the Creo application, the user interface and documentation are translated to
varying degrees into French, German, Italian, Japanese, Korean, Russian, Simplified
Chinese, Spanish, Traditional Chinese, and Brazilian Portuguese. A detailed list of
translated materials is available in the matrix Creo 10.0 Language Support.
OpenGL Library
Creo 10.0.0.0 uses advanced OpenGL 4.3 capabilities that improve the overall display
and graphics performance of Creo. To take advantage of this enhancement and for overall
improved display and graphics performance, Creo 10.0.0.0 requires graphics cards which
support OpenGL 4.3 or later. PTC recommends you consult with your hardware
manufacturer or graphics card vendor.
Upgrading Versions of Java
Java is not installed with the installation of the Creo application. Java is only required if
you are using J-Link, Java Object Toolkit, Creo Product Insight connected to ThingWorx
or Windchill PLM Connector. You can use your existing installation of Oracle Java, but
will require Java version 11 for Creo 10.0.0.0.
If Java version 11 is not installed, then a message appears during the installation. The
message notifies you that your version of JRE (Java run time environment) is out of date
and recommends installing the latest version of Java 11 to optimize performance.

5
Support for JAVA 11 and OpenJDK Amazon Corretto
Along with the existing Java 11 provided by Oracle, PTC now provides support for
Amazon Corretto OpenJDK. The version of Amazon Corretto follows the standard JAVA
support matrix for Creo. You can refer to the Platform Support notes at Creo Future
Platform Support Summary page to see details about the Java versions supported by PTC.
You must install one of the following Java 11 JDK distributions:
• Oracle Java —Creo detects and uses the installed version automatically.
• Amazon Corretto —If you install Amazon Corretto JAVA 11, then set the
environment variable PRO_JAVA_COMMAND to point to the location of the installed
JAVA 11 package.
Storage and Order of Customized Settings for the Creo User Interface
You can customize various aspects of the user interface for your Creo application,
including those in the list below:
• Ribbon
• Quick Access Toolbar
• Shortcut Menus
• Keyboard Shortcuts
• Graphics Toolbar
• Window layout
In all applications, unless the environmental variable, PTC_WF_ROOT is set,
customization settings for the user interface are automatically stored in the profile
directory of the user’s operating system in one of the locations listed below:
• When not connected to Windchill PDMLink, the file is created in %APPDATA%\
PTC\ProENGINEER\Wildfire\.wf\.Settings\creo_
customization.ui
• When connected to Windchill PDMLink, the file is created in the %PTC_WF_
ROOT%\.Settings folder.
When the Creo application starts, customization settings are applied from the following
locations in this order:
• Application load point directory:

6
 <creo_loadpoint>\F000\Common Files \text\creo_<app>_admin_
customization.ui\
• User’s profile directory
• Application startup directory, if the configuration option load_ui_
customization_run_dir is set to yes.
Refer to Support article CS37185 for details.
Recommendation for Configuration Files and Working Directories
When your Creo application starts, stored configuration options from the config.pro
file or the config.sup file, or from both files, are applied from the same locations and
in the same order as they were in Creo 9.0.
Default Embedded Browser in Creo
Starting with Creo 9.0, PTC is switching the default embedded browser in Creo to
Chromium. Internet Explorer is no longer supported and thus, the configuration option to
choose Internet Explorer as a browser is removed. This is due to the fact that Microsoft
has announced the official end of life date for Internet Explorer as June 15, 2022. PTC is
aware of current Creo View Express and authentication limitations with Chromium and is
working to address this as part of Creo 10 development. See Support article CS356984 for
details.
Creo Help Center—Help, What’s New, Tutorials, Reference Documents
Help Centers are available on ptc.com or you can download a Help Center for a local
installation. Refer to the Creo Installation and Administration Guide. The Help Center
provides access to the Help, including What’s New for your application and to other
resources such as free tutorials, Reference Documents, and the Creo Community. To open
a Help Center, click in your application. Alternatively, you can learn about user
interface items with context-sensitive Help using the F1 key. To access reference
information such as the Creo Installation and Administration Guide, click File ▶ Help ▶
Reference from your application or browse through Reference Documents.

PTC Learning Connector

The PTC Learning Connector for Creo, available by clicking in Creo Parametric,
provides context-sensitive recommendations for topics, articles, and videos as you work.
You can search the PTC Learning Connector using one or more keywords. The PTC
Learning Connector provides results from the following sources:

7
• PTC University Precision LMS—eLearning topics and videos
• Support Knowledge Base—Knowledge-based articles
• Help Center—Help topics and links to other materials
By default, the Learning Connector is active. To disable the Learning Connector set the
configuration option enable_learning_connector to no.
Information Related to Windchill

Chromium Embedded Browser

When using Chromium as the embedded browser in Creo to interact with Windchill, you
cannot view the 3D Creo View based thumbnails on the details page of the Creo models.
Chrome and Chromium based browsers do not support plug-ins, which is the technology
currently used to display the 3D Creo View based thumbnails in Creo. See Support article
CS197208 for details.
Single Sign On (SSO) Authentication
The embedded browser for Creo supports authentication to a Windchill server that is
configured for SAML 2.0 single sign-on (SSO) authentication. If you previously
authenticated with a standalone web browser, you will see an additional login request
from the embedded browser for Creo.
Creo Parametric TOOLKIT Is Updated to Support the Multibody Environment
The Creo TOOLKIT environment supports concepts for multibody part design.
Introduced as part of Creo Parametric 7.0, you can create parts that contain one or more
geometric bodies. Bodies contain only solid geometry. Nonsolid entities, like datums,
curves, and quilts, are not contained in any body. Bodies typically contribute to the mass
properties of the model and you can perform geometric operations on the bodies, such as
splitting a body or merging with other bodies. You can also select bodies as references for
features. For more information on the multibody functionality refer to the Creo
Parametric Help. The existing Creo TOOLKIT applications continue to work seamlessly
for legacy models and models having a single body. However, you must upgrade your
toolkit applications in Creo Parametric 8.0 to support the multibody environment. Creo
TOOLKIT is updated as follows to support the multibody environment:
• APIs are added
• Some APIs are deprecated and are superseded by new APIs

8
• Implementation of existing APIs is updated. No visible changes in Creo TOOLKIT
APIs
• Element trees are added to support new multibody features
• Some existing element trees are updated
• Some enumerated data types and their values are updated
• Existing structures are updated
Refer to the chapter, Migrating to the Multibody Environment, in the Creo Parametric
TOOLKIT 10.0 User’s Guide to understand the impact due to these changes and then
update your Toolkit applications as appropriate.

9
Software Copyright Information
Copyright © 2023 PTC Inc. and/or Its Subsidiary Companies. All Rights
Reserved.
Copyright for PTC software products is with PTC Inc. and its subsidiary
companies (collectively “PTC”), and their respective licensors. This software is
provided under written license or other agreement, contains valuable trade secrets
and proprietary information, and is protected by the copyright laws of the United
States and other countries. It may not be copied or distributed in any form or
medium, disclosed to third parties, or used in any manner not provided for in the
applicable agreement except with written prior approval from PTC. More
information regarding third party copyrights and trademarks and a list of PTC’s
registered copyrights, trademarks, and patents can be viewed here: https://www.
ptc.com/support/go/copyright-and-trademarks
User and training guides and related documentation from PTC are also subject to
the copyright laws of the United States and other countries and are provided under
a license agreement that restricts copying, disclosure, and use of such
documentation. PTC hereby grants to the licensed software user the right to make
copies of product documentation and guides in printed form, but only for internal/
personal use and in accordance with the license agreement under which the
applicable software is licensed. Any copy made shall include the PTC copyright
notice and any other proprietary notice provided by PTC. Note that training
materials may not be copied without the express written consent of PTC. This
documentation may not be disclosed, transferred, modified, or reduced to any
form, including electronic media, or transmitted or made publicly available by any
means without the prior written consent of PTC and no authorization is granted to
make copies for such purposes.
UNITED STATES GOVERNMENT RIGHTS
PTC software products and software documentation are “commercial items” as
that term is defined at 48 C.F.R. 2.101. Pursuant to Federal Acquisition Regulation
(FAR) 12.212 (a)-(b) (Computer Software) (MAY 2014) for civilian agencies or
the Defense Federal Acquisition Regulation Supplement (DFARS) at 227.7202-1
(a) (Policy) and 227.7202-3 (a) (Rights in commercial computer software or
commercial computer software documentation) (FEB 2014) for the Department of
Defense, PTC software products and software documentation are provided to the
U.S. Government under the PTC commercial license agreement. Use, duplication
or disclosure by the U.S. Government is subject solely to the terms and conditions
set forth in the applicable PTC software license agreement.
PTC Inc., 121 Seaport Blvd, Boston, MA 02210 USA

10