PAES SPECIFICATIONS

PAES 109 - Walking-type Agricultural Tractor: Pull-type medium (150 kPa to 350 kPa)
• The peak transmission efficiency of the tractor shall be at least 85%. high (>350 kPa)
• The noise emitted by the tractor measured 50 mm away from the • Discharge: small (<0.5 m3/h)
operator’s ear level shall not be more than 92 db (A). medium (0.5 m3/h to 50 m3/h)
• 6 months warranty large (>50 m3/h)
PAES 110 - Walking-type Agricultural Tractor: Rotary Tilling-type • Application rate: low (<5 mm/h)
• The peak transmission efficiency of the axle-driven rotary tiller shall be medium (5 mm/h to 15 mm/h)
at least 80%. high (>15 mm/h)
• The tractor shall have no breakdowns/malfunctions during 5-hour • Trajectory angle: very low (<10°)
continuous running test. low (10° to < 25°)
normal (25° to 28°)
• 6 months warranty
• The actuating mechanism of the sprinkler shall operate at any inclination
PAES 112 - Lever-Operated Knapsack Sprayer of the riser up to 10° from the vertical.
• The sprayer shall have a minimum volumetric efficiency of 80%. • 6 months warranty.
• The sprayer shall not leak from the body or any of its component parts
PAES 127 - Drilling Rig
and the pressure shall not drop by more than 35 kPa when subjected to
leak test. • The drilling rig shall be capable of drilling at least 30-meter depth and a
minimum borehole diameter of 100 mm.
• The tank shall have a minimum capacity of 10 liters.
• The noise emitted by the machine measured 50 mm away from the
• The overall weight of the sprayer with its component parts, when fully
operator’s ear level shall not be more than 92 db (A).
loaded with water shall not exceed 22 kgs.
• 6 months warranty
• 6 months warranty
• Soil Type based on its Grain Size: Gravel > 2.0
PAES 114 - Centrifugal Pump Sand 2.0 - 0.05
• 6 months warranty Silt 0.05 - 0.002
PAES 116 - Small Engine Clay < 0.002
• At least 80% of the rated maximum output power shall be attained PAES 129 - Electric Motor *READ THIS ON PAES!
during the varying load test. • Universal motors are small series motors up to 3.73 kW rating.
• Noise level - 92 db(A) • 6 months warranty.
• 6 months warranty
PAES 131 - Moldboard Plow
PAES 118 - Four-Wheel Tractor • Hard wood and/or mild steel should be used in the manufacture of
• Three-point Linkage Categories standard, frame and landside.
Category Max. Drawbar Power kW • Carbon steel with at least 80% carbon content (e.g. AISI 1080) shall be
1 15 -35 used in the manufacture of the share.
2 30 - 75 • 6 months warranty.
3 60 - 168
4 135 - 300 PAES 132 - Moldboard Plow MOT
• All tractors powered by 15 kW engines or higher shall be equipped with • The implement’s draft shall be approximately 15% of the animal’s body
ROPS and seat belts weight.
• 6 months warranty • Plowing operation shall be done in fields of not less than 250 m 2 for
animal-drawn, 500 m2 for two-wheel tractor-drawn and 1,000 m2 for
PAES 121 - Disc Plow four-wheel tractor-drawn plows.
• Mild steel shall be used in the manufacture of the frame, scraper, thrust • For four-wheel tractor-drawn plows, a traveling speed of 5 kph to 6 kph
wheel and hitch. shall be maintained during the operation.
• Cast iron shall be used in the manufacture of spool. • For two-wheel tractor-drawn plows, a traveling speed of 3 kph to 4 kph
• Carbon steel shall be used in the manufacture of hitch pin. shall be maintained during the operation.
• Carbon steel with at least 80% carbon content (e.g. AISI 1080) or alloy • For animal-drawn plows, a traveling speed of 2 kph to 4 kph shall be
steel with at least 0.0005% boron content shall be used in the maintained during the operation.
manufacture of the disc blades. • The depth of cut shall be set at 1/3 of the disc diameter for disc plow.
• High carbon steel shall be used in the manufacture of standard. • The starting position shall be at least 2 m to 5 m from poles A and C to
• 6 months warranty. stabilize speed before measuring and recording data.
PAES 122 - Seeder and Planter • The soil hardness shall be measured using cone penetrometer.
• Required minimum efficiency PAES 133 - Disc Harrow MOT
Type of seeder Field Efficiency (%) • Harrowing operation shall be done in fields of not less than 1,000 m2
Row-crop planter and shall be rectangular in shape with sides in the ratio of 2:1 as much
Without fertilizer applicator 60 as possible.
With fertilizer applicator 55 • A traveling speed of 7 kph to 8 kph shall be maintained during the
Seed drill 65 operation.
• 6 months warranty
• Depending on the tractor size, headland shall be at least 3 m in length.
• The seeds to be used for this test should be the same as the ones used in
metering mechanism test. Each test trial shall be conducted in an area of PAES 134 - Furrower
not less than 500 m2 for manual seeding implement and 1,000 m2 for • The height of the standards shall vary according to the crop requirement
power-operated seeders. but shall not exceed 500 mm.
• 6 months warranty.
PAES 124 - Walking-type Agricultural Tractor: Float-Assist Tiller
• The peak transmission efficiency of the tractor shall be at least 80%. PAES 136 - Agricultural Trailer
• 6 months warranty. • The trailer shall be fitted with six amber (yellow) reflectors of not less
than 75 mm diameter placed at a distance of not more than 150 mm
PAES 125 - Sprinkler Head: Rotating Impact-Driven Type
inwards from extreme ends of rear and sides.
• Radius of throw: small (<5 m)
• 6 months warranty.
medium (5 m to 50 m)
• The trailer shall not show any sign of breakage or deformation in any
large (>50 m)
part when loaded with 125% of its payload and operated for a minimum
• Operating pressure: low (<150 kPa)
of three hours at a maximum speed of 30 kph.
Lonny Jung
 PAES SPECIFICATIONS

• The trailer shall not be loaded beyond the height of 3.8 m when PAES 155 - Mist Blower
measured from the ground. • There shall be a discharge rate of 0.12 to 0.17 Lpm per nozzle.
• The trailer shall be operated at a maximum speed of 20 kph for four- • There shall be an air speed of at least 90 m/s.
wheel tractor and 10 kph for two-wheel tractor. • 1 year warranty.
PAES 138 - Guidelines on After-Sales Service • 3 test trials.
• Warranty shall not cover any damage due to the following conditions: PAES 157 - Power Sprayer for Mango
a) accident or natural disaster; b) improper operation and maintenance • The power sprayer shall not produce noise higher than 92 db(A)
of the machine; and c) unauthorized repair and/or use of non-genuine measured 1 meter away from the source of noise.
parts. • The power sprayer shall have an operating pressure of 1.21 MPa (175
PAES 139 - Roll-Over Protective Structures (ROPS) psi) to 1.75 MPa (250 psi).
• Steel with an as-rolled thickness of not less than 2.5 mm and with a • The power sprayer shall have a discharge rate of at least 15 Lpm.
carbon content of not less than 0.2 % shall be used in the manufacture • 6 months warranty for parts and services.
of ROPS. • 1 year warranty for prime mover.
PAES 141 - Weeder • 3 test trials.
• The weeding efficiency shall be at least 80%. PAES 159 - Sugarcane Planter
• The percentage of plant damage shall not exceed 6 %. • The sugarcane planter shall plant the billets at a depth ranging from 20
PAES 143 - Rice Drum Seeder cm to 27 cm.
• The drum seeder shall be generally made of steel, plastic and rubber. • There shall be at least 80% field efficiency.
• 6 months warranty. • 6 months warranty.
PAES 144 - Rice Drum Seeder MOT • 3 test trials.
• This test shall be carried out at ¼, ½, and ¾ of the drum seeder’s hopper PAES 161 - Soil Auger
capacity based on its diameter with three seeding rate settings – low, • Soil boring auger is designed for drilling holes in the soil.
medium and high. • Welded joints shall not be less than 4 mm size fillet weld.
• Seeding operation shall be done in fields of not less than 250 m2 and • Undercut shall not exceed 2 mm for any length of weld.
shall be rectangular in shape with sides in the ratio of 2:1 as much as • The soil auger shall have an efficiency of at least 80%.
possible. The depth of wet field shall not exceed 12 cm. • The power-operated soil auger shall not produce noise higher than 92
• A traveling speed of 1 kph to 2 kph shall be maintained during operation. db(A) measured 50 mm away from the operator’s ear level.
• The starting position shall be at least 2 m from poles A and C to stabilize • 1 year warranty.
speed before measuring and recording data. PAES 163 - Spring-tooth Harrow
PAES 145 - Granular Fertilizer Applicator • The spring-tooth harrow shall have an operating depth of 50 to 150 mm
• The main structure of granular fertilizer applicator shall be generally (2” to 6”).
made of steel. • There shall be at least 80% field efficiency.
• 6 months warranty. • 1 year warranty.
PAES 146 - Granular Fertilizer Applicator MOT • 3 years trials.
• Fertilizer applicator shall be done in fields not less than 100 m2 for PAESS 165 - Granule Applicator
manually-operated, 250 m2 for animal-drawn, 500 m2 for two-wheel • There shall be at least 80% field efficiency.
tractor-drawn and 1000 m2 for four-wheel tractor-drawn fertilizer • The granule applicator shall not produce noise higher than 92 db(A)
applicators. The plot shall be rectangle in form with sides in the ratio of measured 1 meter away from the source of noise.
2:1 as much as possible. • 1 year warranty.
• For four-wheel tractor-drawn fertilizer applicator, a traveling speed of 5 • 3 test trials.
kph to 6 kph shall be maintained during the operation.
PAES 167 - Disc plow for walking type agricultural tractor
• For two-wheel tractor-drawn and manually-operated fertilizer
• Plowing operation shall be done in fields of not less than 500 m2.
applicators, a traveling speed of 3 kph to 4 kph shall be maintained
• A minimum traveling speed of 3 kph shall be attained during the
during the operation.
operation
• For animal-drawn fertilizer applicator, a traveling speed of 2 kph to 4
• 3 test trials.
kph shall be maintained during the operation.
• Headland shall be at least 3 m in width.
• 3 test trials.
• 1 year warranty.
PAES 147 - Field cultivator
• The field cultivator shall have an operating depth of 51 mm to 152 mm PAES 169 - Spike tooth harrow for walking type agricultural tractor
(2” to 6”). • Welded joints shall not be less than 4 mm size fillet weld.
• There shall be at least 80% field efficiency. • Undercut shall not exceed 2 mm for any length of weld.
• 3 years warranty. • 1 year warranty.
• 3 test trials. • 3 test trials.
PAES 149 - Subsoiler PAES 171 - Rice precision seeder
• The subsoiler shall have a operating depth of at least 350 mm. • Field Efficiency (%), minimum 60
• There shall be at least 80% field efficiency. • Seeding Rate (kg/ha), minimum 15
• 3 years warranty. • Seeding Efficiency (%), minimum 85
• Noise level, dB(A), maximum 92
PAES 151 - Mechanical Rice Transplanter
• 1 year warranty.
• There shall be a field efficiency of at least 80%.
• The percent damaged hills and percent missing hills shall not exceed
10%.
• 3 years warranty
PAES 153 - Hand Pump
• Lift type shall lift the water from cistern or well to at least 6 m.
• Force type hand pump shall lift the water up to a height of 15 m from
ground level.

Lonny Jung
 PAES SPECIFICATIONS

PAES 201 - Heated-Air Mechanical Grain Dryer • Unshelled Loss - 5.0%

• Heating system efficiency: • Scattering Loss - 0.5%
Petroleum based fuel – DF, 90% • Mechanically Damaged Grain, percent, maximum - 3.5
Petroleum based fuel – IDF, 75% • Noise Level db(A), maximum - 92
Biomass fuel – DF, 65%
PAES 222 - Chipping Machine
Biomass fuel – IDF, 50%
• Chipping machine shall be able to cut at least three different thickness
• Noise level – 92 db(A) settings with 5% maximum variation of cut.
PAES 204 - Mechanical Rice Thresher • The maximum noise emitted by the forage chopper shall be 92 db (A).
• Threshing Recovery, percent, minimum - 97
PAES 224 - Rice Combine
• Threshing Efficiency, percent, minimum - 99.8
• Field Efficiency, minimum - 75%
• Blower Loss - 1.2%
• Header Loss, maximum - 0.5%
• Separation Loss - 1.3%
• Blower Loss - 1.3%
• Unthreshed Loss - 0.2%
• Separation Loss - 1.2%
• Scattering Loss - 0.3%
• Unshelled Loss - 0.3%
• Mechanically Damaged Grain, percent, maximum - 2.0
• Scattering Loss - 0.2%
• Net Cracked Grain, percent, maximum - 5.0
• Total Machine Loss, maximum - 3.5%
• Noise Level db(A), maximum - 95
• Mechanically Damaged Grain, percent, maximum - 2.0
PAES 206 - Rice Mill • Net Cracked Grain, percent, maximum - 5.0
• Milling Recovery Index, minimum - 0.97 (Cono), 0.98 (Rubber Roll) • The recommended reel speed should be 25 % to 50 % faster than the
• Percent Head Rice Index, minimum - 0.90 ground speed.
• Hulling Efficiency Percent, minimum - 80
PAES 226 - Micromill
• Noise Level db(A), maximum - 95
• Milling Recovery, minimum - 62%
PAES 208 - Power-Operated Corn Sheller
• Head Rice, minimum - 50%
• Shelling elements shall be made of carbon steel
• Shelling Recovery, percent, minimum - 97 • Broken Grains, maximum - 50%
• Shelling Efficiency, percent, minimum - 99.5 • Bran, maximum - 10%
• Blower Loss - 1.0% • Noise Level db(A), maximum - 92
• Separation Loss - 1.0% PAES 228 - Fiber Decorticator
• Unshelled Loss - 0.5% • Fiber Recovery: Abaca - 3.37%
• Scattering Loss - 0.5% Banana - 0.59%
• Purity, percent, minimum - 98 Maguey - 3.75%
• Mechanically Damaged Grain, percent, maximum - 3.0 Pineapple - 1.42%
• Net Cracked Grain, percent, maximum - 5.0 Ramie - 5.00%
• Noise Level db(A), maximum - 100 Sisal - 3.52%
PAES 210 - Corn Mill PAES 230 - Coconut Oil Expeller
• For rollers, carbon steel • High-grade steel shall be generally used for the manufacture of the
• Grit #10 - 28% different components of the oil expeller.
• Grit #12 - 21%
• The expeller barrel shall be made of tool steel.
• Grit #14 - 7%
• The minimum percent crude oil recovery of oil expeller shall be 60%.
• Grit #16 - 6%
• The maximum temperature measured from the expeller barrel shall not
• Grit #18 - 2%
exceed 71ºC.
• Main Product, minimum - 64%
• By-Product, minimum - 31% PAES 232 - Multicrop Washer-Peeler
• Degerminator Efficiency, minimum - 80% • The minimum machine efficiency of the multicrop washer-peeler shall
be 90%.
PAES 212 - Rice Reaper
• All welded parts shall conform to AWS D1.1:2000.
• Field Efficiency, minimum - 65%
• Header Loss, maximum - 0.5% PAES 234 - Multicrop Juice Extractor
• Conveying Loss, maximum - 1.0% • All welded parts shall conform to AWS D1.1:2000.
• Total Machine Loss, maximum - 1.5% • The minimum juice extraction efficiency shall be 75% of the initial
• Noise Level db(A), maximum - 92 moisture content of the crop.
• The reaper shall be operated at the speed of 3 kph to 5 kph • The minimum juice extraction recovery shall be 90% of the juice
extracted.
PAES 214 - Rubber Roll for Rice Mill
• The maximum noise emitted by the multicrop juice extractor shall be 96
• The rubber shall have a minimum thickness of 15 mm. db (A).
• For hardness, it shall be conducted using a Durometer Hardness Tester.
PAES 236 - Crystallizer
PAES 216 - Hammer Mill • The minimum cooking recovery shall be 90 %.
• The hammer mill should be used for the desired product having a
PAES 238 - Multicrop Micromill
reduction ratio of at least 50:1.
• The minimum milling recovery shall be 95%.
PAES 218 - Forage Chopper
• The minimum milling efficiency shall be 90 %.
• Precision-cut and semi-precision cut forage chopper shall be able to cut
at least three different length settings with 5% max. variation of cut. PAES 244 - Biomass Shredder
• The maximum noise emitted by the forage chopper shall be 96 db (A). • Shredding efficiency shall be at least 90%.
PAES 220 - Peanut Sheller PAES 246 - Dehusked Corn Dryer
• Shelling Recovery, percent, minimum - 93 • Airflow rate of drying air for dehusked corn dryer shall be 15 to 40
• Shelling Efficiency, percent, minimum - 95 m3/min per cubic meter of dehusked corn.
• Blower Loss - 0.5% • The moisture content reduction rate shall be at least 0.25% per hour.
• Separation Loss - 1.0%
Lonny Jung
 PAES SPECIFICATIONS

PAES 248 - Fruit Dryer • The overhead rail system shall support a maximum moving load of 1000
• Maximum range of drying air temperature to be used in heat pump fruit kg for manual type while 2000 kg for automatic type of rail system.
dryer shall be 60°C to 70°C. • The minimum distance from trolley to trolley for cooling area shall be
• Air velocity inside the drying chamber of fruit dryer should be at least 300 mm.
0.2 m/s. • Track vibration shall not be more than 20 Hz (85 g).
• Final moisture content wet basis of the fruit to be dried shall not be more PAES 513 - Stunning Box/ Knocking Pen
than 15%. • For upright type, the pen floor shall be non-slip with slope of 7% inside
• Minimum drying efficiency of the fruit dryer shall be 75%. the pen and 16% on the discharge side.
• Actual performance factor shall be at least 70% of the total carnot cycle • For rotating type, Pressure gauge of range 0 to 10 bars with at least 70
performance factor of the heat pump fruit dryer system. mm diameter shall be installed.
PAES 250 - Coconut Coir Decorticator PAES 517 - Overhead Rail System for Large Ruminants
• Peripheral speed of the blades should be 25 m/s. • Overhead rail system shall support a maximum moving load of two (2)
PAES 252 - Coffee Pulper tons per meter.
• Pulping Recovery, percent, minimum - 93.5 • Track vibration shall not be more than 20 Hz (85 g).
• Pulping Efficiency, percent, minimum - 95 PAES 519 - Splitting Saw for Large Ruminants
• Separation Loss - 1.0 • The cutting blade shaft shall be made of tool steel.
• Unpulped Loss - 5.0 • The minimum splitting efficiency of the splitting saw shall be 80%.
• Scattering Loss - 0.5
• Purity, percent, minimum - 98
• Mechanically damaged parchment coffee, percent, maximum - 3.5
PAES 254 - Abaca Stripper
• For “hagotan”, stripping block shall be made of mild steel.
• Coil spring shall be made of high carbon steel.
• For manually operated stripping machine or “Hagotan”, minimum
potential fiber recovery shall be 12% of the weight of fresh tuxy.
• For spindle type stripping machine, minimum potential fiber recovery
shall be 10.5% of the weight of fresh tuxy.
• Stripping efficiency of the mechanized stripping machine shall be at
least 80%. Maximum stripping loss shall be 20%.
PAES 256 - Corn Picker
• Field efficiency (%), minimum - 65
• Picking efficiency (%), minimum - 99.5
• Conveyance efficiency (%), minimum - 99
• Total machine efficiency (%), minimum - 98.5
PAES 258 - Feed Mixer
• For ribbon feed mixer, linear speed shall range from 75 m/min to 100
m/min.
• For paddle feed mixer, linear speed shall range from 100 m/min to 120
m/min.
• For vertical feed mixer, the screw shall have rotating speed ranging from
100 to 200 rpm.
PAES 260 - Paddy seed cleaner
• Cleaning Recovery, % minimum - 99
• Purity of Output, % minimum - 98
• CleaningLoss, % maximum - 1
PAES 264 - Rice Husk Fed Heating System
• Burning efficiency of the furnace shall be at least 95%.
• Furnace efficiency shall be at least 65%.

PAES 503 - Hog Electric Stunner

• The electrical stunner shall operate at a constant frequency of 60 Hz.
PAES 507 - Dehairing Machine
• Scraper paddle shall be made of natural rubber material.
• The minimum dehairing efficiency shall be 95%, considering good
scalding operation has been observed.
• The minimum power requirement of the motor shall be 2.24 kW (3 Hp).
PAES 509 - Splitting Saw for Hog Carcass
• The minimum percent splitting efficiency shall be 80%.
• The optimum speed of the cutting blade for mechanical saw shall be
3500 to 4000 revolutions per minute (rpm) or a linear speed of 75 m/sec.
PAES 511 - Overhead Rail System for Hogs
Lonny Jung