Scribd
Upload
280 views

ALFANOIL - Waha EPF Presentation (MS)

Uploaded by

Badees Ghazal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
280 views

ALFANOIL - Waha EPF Presentation (MS)

Uploaded by

Badees Ghazal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

ALFANOIL EPF – DESIGN BASIS

EPF – Design Basis

Project:

North Gialo (6J) Development Project EPF

Location:

Libya

Owner:

Waha Oil Company


BASIC OF DESIGN

Ø Production gathering with Individual flowline connects producer wells to EPF


manifold. Total seventeen (17) flowline will be installed to connect the existing
producer wells. What bases of selection of
7wells and which wells?

Ø There will be 7 well flow lines to be installed in initial EPF production. 10 spare
connections are required for rest of existing wells.

Ø The design capacity of EPF will be as followings:


Oil – 20,000 BOPD what about condensate is it
sipked?

Gas – 40 MMSCFD Is it treaded water? unless


you should increase the size

Water Treatment – 500 BWPD


Ø Crude Composition (with BTEX)
BASIC OF DESIGN
Component mol%
Nitrogen 0.4073
CO2 3.2919 The fluid composition contain H2S = 50 ppm, The out put is 10ppm or 1.5
H2S 0.005 ppm dissolved in treated water, Is their sweeting uni, TBD
Methane 47.6609
Ethane 10.265
Propane 6.5152
i-Butane 1.3141
n-Butane
i-Pentane
3.057
1.2775
Ø The adjusted overall inlet feed
n-Pentane 1.3886
Cyclopentane
M-cyclopentane
0.0096
0.1131
composition is considered from the
Process BOD shared:
Cyclohexane 0.0944
M-cyclohexane 0.065
Benzene 0.3206
Toluene 0.158
Ethynyl-BZ 0.0926
o-Xylene 0.0374
124-MBenzene 0.0551
C6* 1.7761
C7* 2.0728
C8* 2.2932
C9* 1.6759
C10* 1.3027
C11* 0.9303
C12* 0.7362
C13* 0.7094
C14* 0.6029
C15* 0.519
C16* 0.4065
C17* 0.3713
C18* 0.3604
C19* 0.312
C20* 0.2669
C21* 0.2277
C22* 0.2173
C23* 0.1973
C24* 0.1765
C25* 0.1641
C26* 0.1422
C27* 0.1412
C28* 0.1292
C29* 0.1172
C30+* 1.627
H2O 6.3966
TOTAL 100%
BASIC OF DESIGN

Ø Package inlet Pressure as per input:


HP Pressure : 430 Psig
LP Pressure : 100 Psig

Ø Package inlet Temperature as per input: 110 F to 170 F

Ø Design Consideration:
70% flow from HP Pressure and 30% from LP Pressure
70% flow from LP Pressure and 30% from HP Pressure
Ø Outlet Battery limit Condition:
Crude Export Pressure at B/L : 252 psig
what type of proposed Gas

Gas Export Pressure ar B/L : 800 psig


Compressor ?
BASIC OF DESIGN

Ø Crude Oil:
RVP (to ASTM 323-82): 10 psia
BS&W content: 0.05 wt%
Salt Content: 12 PTB

Ø Export Gas
Hydrocarbon Dew Point: 15F @ 800psig
Water Content: 4 lb / MMSCF

Ø Treated Water:
Oil content: 55 ppmv maximum
Solid particles diameter: 20 micron maximum
H2S content: 10 ppm maximum
O2 content: 5 ppb maximum
BASIC OF DESIGN

Ø Crude Oil:
RVP (to ASTM 323-82): 9.08psia
BS&W content: 0.05 wt%

Ø Export Gas
Hydrocarbon Dew Point: 14.7F @ 800psig
Water Content: 2.4 lb / MMSCF

Ø Treated Water:
Oil content: 55 ppmv maximum
H2S content: 1.5 ppm maximum

Ø Flow at the package outlet:


Crude Export: 21680 BOPD
Gas Export : 36.5 MMSCFD
Treated Water : 528 BWPD
BASIC OF DESIGN

Why condensate send back


to LP Separator?

You might also like