Scribd
Upload
10 views

How To Navigate UsSteps With Pictures

The document provides 9 steps for navigating using a VOR (VHF Omnidirectional Range) radio. It explains how to tune the VOR frequency, identify the correct station, and determine which radial you are on by centering the CDI needle and noting the FROM indication. It also describes how to set the OBS knob to the reciprocal radial to fly direct to the VOR station by centering the needle next to the TO indication.

Uploaded by

Aashi Khandelwal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

How To Navigate UsSteps With Pictures

The document provides 9 steps for navigating using a VOR (VHF Omnidirectional Range) radio. It explains how to tune the VOR frequency, identify the correct station, and determine which radial you are on by centering the CDI needle and noting the FROM indication. It also describes how to set the OBS knob to the reciprocal radial to fly direct to the VOR station by centering the needle next to the TO indication.

Uploaded by

Aashi Khandelwal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

How to Navigate Using a VOR: 9

Steps (with Pictures)


Tune and identify. Tune the VOR frequency in the navigation radio.
It will be listed on VFR and IFR charts as well as instrument
approaches if it is a part of the approach. Identify that you have the
correct station and the signal is reliable by listening to the Morse
code identifier.[1] If you see a red “NAV” or “VOR” flag, barber pole,
or OFF instead of a TO/FR indication, the signal is unreliable, you are
overhead, or roughly 90º from the selected radial. The signal is
unreliable when you cannot hear the Morse Code identifier. A red
“GS” flag is not a VOR indication.
Get your bearing. Determine which radial you are on by turning the
OBS (Omni Bearing Selector) knob until the CDI (Course Deviation
Indicator) needle is centered and you have a FROM indication.

Looking at the picture above, you can see that the needle is
centered and the instrument gives a FROM indication (as a small
white triangle is showing and pointing down); so the aircraft is
on the 254 degree radial. It doesn't matter what the heading of
the aircraft is; it is located somewhere along a line 254° from
the VOR station. In order to fly to the VOR station, you would
first twist the OBS knob until the needle is centered and the
white triangle appears, next to the "TO" designator (in the
opposite direction, or up, from the "FR" designator). Note that
this will be 074 degrees, exactly 180° from the current radial.
Now turn the aircraft to this new heading and keep the needle
centered -- this will take you to the VOR station.
:

You might also like