Operation and maintenance manual for

Chain Hoist PREMIUM PRO

Installation - Operation - Maintenance

Chain Hoist
PREMIUM PRO 1 t

IMPORTANT - READ BEFORE USE!

PLANETA-Hebetechnik GmbH • Resser Str. 17 & 23 • D-44653 Herne
Tel. +49 2325 9580-0 • Fax +49 2325 77077 • [email protected] • www.planeta-hebetechnik.de
© Reprint, also in extracts, only with written permission of PLANETA-Hebetechnik GmbH
01-02-09-0000-0918-03-BA-EN-PLA
Index

SAFETY4

1. Generally 5
2. Important Notes 6
3. Special safety 6
4. Installation instructions before connecting 7
5. Operation 7
6. Maintenance and inspection 7
7. Overload safety device 8
8. Specifications 9
9. Spare parts for Chain Hoist PREMIUM PRO 0,25 t – 5 t 10
10. Spare Parts List for Chain Hoist PREMIUM PRO 0,25 t – 5 t 11
11. Spare parts for Chain Hoist PREMIUM PRO 10 t 15
12. Spare Parts List for Chain Hoist PREMIUM PRO 10 t 16
13. Annual safety inspections 17

CE-DECLARATION OF CONFORMITY
SAFETY

1. Read before 2. Do not 3. Do not work 4. Never pull the 5. Never work
use! overload under a load! chain from the with a
side! damaged
hoist!

6. Never lift human 7. Never throw 8. Do not wrap 9. NEVER 10. Never work
with this hoist! the hoist the load chain extend the up to the end
around the Hand lever of chain
load with a pipe!

11. Never attach the 12. 11.Never 13. Never work 14. Never remove
load on the tip of work with a without a the warning
the hook! twisted or safety latch! notice
broken chain!

4
1. Generally

Chain hoists are for lifting of loads only.

The hoists can be attached to a trolley of any type as a travelling hoist.

Five prominent features:

– Safety in operation with minimum maintenance.

– High efficiency and low hand force.
– Light weight and easy handling.
– Fine appearance with small size
– Durability in service.

Intellectual property

Hoist models, drawings and engineering are of our exclusive property. It is expressly
forbidden to copy, use or hand over to third parties such information without a specific
written permission.

Warranty

PLANETA warrants to the original user its hoists to be free of defects in material and
workmanship for a period of one year from the date of purchase. PLANETA will repair,
without cost, any product found to be defective, including parts and labor charges, or
at its option, will replace such products or refund the purchase price less a reasonable
allowance for depreciation, in exchange for the product.
If any product proves defective within its original one year warranty period, it should
be returned to any authorized PLANETA dealer, transportation prepaid with proof of
purchase or hoist data sheet / test certificate.
This warranty does not apply to products which PLANETA has determined to have
been misused or abused, improperly maintained by the purchaser; or where the
malfunction or defect can be attributed to the use of no genuine PLANETA parts.
PLANETA makes no other warranty, and all implied warranties including any warranty
of merchantability or fitness for a particular purpose are limited to the duration of the
expressed warranty period as set forth above. PLANETA´s maximum liability is limited
to the purchase price of the product and in no event shall PLANETA be liable for any
consequential, indirect, incidental, or special damages of any nature arising from the
sale or use of the product, whether based on contract, tort, or otherwise.

5
2. Important Notes

– Read instruction and make it available to operators on the device before use.
– Operator must be instructed properly with the device. Never leave the device under
load unattended!
– Never exceed lifting capacity indicated on the name plate. Do not draw any pull and
lifting chains over angles.
– Do not transport persons or loads with the product over areas where persons
could be.
– Device must be checked once a year by a technical expert, in case of harder
operating conditions more often. Ask your retailer or us. The enterpriser is liable in
case of damages and has to provide test certificates.
– Check the device regarding damages, unfastened screws or twists before using it
to eliminate failures.
– Repair works on hoisting devices shall only be carried out by the manufacturer or
an instructed repair shop by using original spare parts.
– Check load carrying constructions, load securing devices, mountings, cross beams
etc. regarding load carrying capacity and condition of the required loads by a
technical expert.
– Non-observance of the instruction, improper use, and corrosion by insufficient
protection or product alterations without authority result in expiry of the warranty.
– Risk of corrosion in case of continuous contact with unfavourable atmospheric
conditions as for example high humidity or harmful environmental influences
atmospheres with acid vapours, corrosive gases or high dust concentration cause
early wear. This effectuates no claim under warranty.
– Further information or spare part lists will kindly be provided by us or your specialist
dealer.

3. Special safety

– Read before use.

– Do not overload
– Do not work under a load
– Never pull the chain from the side
– Never work with a damaged hoist
– Never lift persons with this hoist
– Never throw the hoist
– Do not wrap the load chain around the load
– Never work up to the end of chain
– Never attach the load on the tip of the hook.
– Never work with a twisted or broken chain
– Never work without a safety latch
– Never remove the warning notice

6
4. Installation instructions before connecting

A. Before first use

– Chain hoists with travelling trolley underlie the accident prevention regulation (UVV)
(Federal cooperative society regulations of Germany - DGUV Regulation 52).
Before the first initiation a quality inspection by a technical expert for cranes has to
be carried out. Please contact PLANETA for it. We will kindly advise you!
– Never use the hoist below -20 degrees Celsius or above + 60 degrees Celsius.

B. Installation and testing prior to each use

– Hang hoist with the clamp into the load carrying system and turn once.
– Hand chain and load chain must hang free and be without breaks or twists.
– Chain block: Pull through hand chain one time completely without load.
– Inspection of load brake: Lift up lightly the load and hold it. If load is safe, go on lifting.
When lowering, the load shall not slide after hand chain shutdown or stop of the lever.
– If everything is performed properly, operation can be started.
– Important for devices of multiple lines: Lower block shall not be snapped through the
chain loop. This can be recognised by a twisted chain. Each second chain link is in
one row not steadily in alignment. If the welded seams of the chain links are not in
same direction the lower block must be struck back through the chain loop.
– The last chain link must be fastened on the hoist body.

5. Operation

– Brake closes independently when hanging on the minimal load

(appr. 10% of nominal load).
– Chain block is only suitable for vertical lifting and lowering.
– To move the load the hand chain is pulled up or down.

6. Maintenance and inspection

Chains and Hooks

– The chains and clamps have to be inspected continuously! Clean chain before
inspection. Lubricate load chain from time to time! Never lubricate or grease the
brake!
– Retracted chain shall not click under load.
– Check chain for tension! The internal length (t) of a worn chain link, smallest
diameter of wire (D) and length of 11 chain links (a) are measured by a slide gauge
where the chain must be tightened firmly.
– Dimensions: If the deviations of measurement exceed the values (a) in the
following table substitute chain immediately. Measure of diameter (D) shall not be
under-run and the pitch (t) of the single link not be exceeded.

7
7. Overload safety device

All spur gear chain blocks PREMIUM PRO have a

standard adjustable overload safety device from 500kg
or above. This protects the device by prohibiting lifting
more than the preset friction connection in the hand
wheel permits. The overload protection is set at the
factory. By fastening or loosening the press nut pos. 49,
the pressure on the friction disc is increased or lowered.
If the desired value is reached, the nut pos. 49 is
secured by bending one or two teeth of the tooth wheel
pos. 50 into the corresponding gap in the nut.

Max. measurement of
Min. chain link
Capacity
1 chain 11 chain diameter (D)
link (t) links (a)

0,25 t 12,6 mm 134,9 mm 3,6 mm

0,5 t 15,8 mm 170,0 mm 4,5 mm

1 t 18,9 mm 210,9 mm 5,4 mm

1,5 t 25,2 mm 271,9 mm 7,2 mm

2 t 25,2 mm 271,9 mm 7,2 mm

3 t 31,5 mm 352,5 mm 9,0 mm

5 t 31,5 mm 352,5 mm 9,0 mm

10 t 31,5 mm 352,5 mm 9,0 mm

20 t 31,5 mm 352,5 mm 9,0 mm

Clamp mouth opening

Capacity
“G” normal – max.

0,25 t 40 – 42 mm

0,5 t 26 – 29 mm

1 t 32 – 35 mm

1,5 t 38 – 42 mm

2 t 38 – 42 mm

3 t 43 – 47 mm

5 t 48 – 53 mm

10 t 60 – 66 mm

20 t 84 – 92 mm

8
8. Specifications

Chain Hoist PREMIUM PRO 0,25 - 3 t Chain Hoist PREMIUM PRO 5 t Chain Hoist PREMIUM PRO 10 t

TYPE PREMIUM PRO... 0,25 0,5 1 1,5 2 3 5 10 20 30

Capacity t 0,25 0,5 1 1,5 2 3 5 10 20 30

Standard lift m 3 3 3 3 3 3 3 3 3 3

Min. headroom (A) mm 259 309 373 460 460 553 630 900 1033 1320

Hand chain force daN 22 24 30,5 36 36 37 39 39,5 40,5 47 x 2

Hand chain operation m 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5
length

Number of chain falls 1 1 1 1 1 1 2 4 8 12

Chain size mm 4 x 12 5 x 15 6 x 18 8 x 24 8 x 24 10 x 30 10 x 30 10 x 30* 10 x 30 10 x 30

B (Dimensions) mm 95 114 152 190 190 240 240 391 955 690

C mm 99,4 110 139 150 150 158 158 166 169 435

D mm 30 33 40 52 52 62 72 85 110 106

E mm 22 22 28 33 33 37 44 60 70 80

F mm 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5

Weight with 3 m lift kg 4,2 5,7 10,8 16,8 17,1 26,2 40 62 160 350

Weight for 1 m additional lift kg 0,35 0,55 0,78 1,4 1,4 2,2 4,4 8,8 17,6 21,6

* Grade 100 Subject to technical changes!

9
10
Chain Hoist PREMIUM PRO 5 t Chain Hoist PREMIUM PRO 0,25 - 3 t
9. Spare parts for Chain Hoist PREMIUM PRO 0,25 t – 5 t

Chain Hoist PREMIUM PRO 0,25 - 3 t Chain Hoist PREMIUM PRO 5 t
10. Spare Parts List for Chain Hoist PREMIUM PRO 0,25 t – 5 t

Component parts PREMIUM PRO 0,25 t Component parts PREMIUM PRO 0,5 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
1 8 Locking nut Z0200101 Piece 1 8 Locking nut Z0200201 Piece
2 1 Gear box cap Z0200102 Piece 2 1 Gear box cap Z0200202 Piece
3 1 Washer Z0200103 Piece 3 1 Washer Z0200203 Piece
4 2 Gear wheel Z0200104 Piece 4 2 Gear wheel Z0200204 Piece
5 1 Driving shaft Z0200105 Piece 5 1 Driving shaft Z0200205 Piece
6 1 Center gear wheel Z0200106 Piece 6 1 Center gear wheel Z0200206 Piece
8 1 Right side plate Z0200108 Piece 8 1 Right side plate Z0200208 Piece
9 1 Top hook pin Z0200109 Piece 9 1 Top hook pin Z0200209 Piece
12 2 Chain guide roller Z0200112 Piece 12 2 Chain guide roller Z0200212 Piece
14 1 Load Chain sprocket Z0200114 Piece 14 1 Load Chain sprocket Z0200214 Piece
15 5 Hand chain Z0200115 m 15 5 Hand chain Z0200215 m
16 1 Left side plate Z0200116 Piece 16 1 Left side plate Z0200216 Piece
17 1 Chain stripper Z0200117 Piece 17 1 Chain stripper Z0200217 Piece
18 1 Chain suspension Z0200118 Piece 18 1 Chain suspension Z0200218 Piece
19 1 Split pin Z0200119 Piece 19 1 Split pin Z0200219 Piece
20 1 Pin Z0200120 Piece 20 1 Pin Z0200220 Piece
21 3 Load chain Z0200121 m 21 3 Load chain Z0200221 m
22 1 Name plate Z0200122 Piece 22 1 Name plate Z0200222 Piece
23 1 Brake seat Z0200123 Piece 23 1 Brake seat Z0200223 Piece
25 1 Ratchet disk Z0200125 Piece 25 1 Ratchet disk Z0200225 Piece
26 4 Name plate rivet Z0200126 Piece 26 4 Name plate rivet Z0200226 Piece
27 1 Split pin Z0200127 Piece 27 1 Split pin Z0200227 Piece
28 1 Castle nut Z0200128 Piece 28 1 Castle nut Z0200228 Piece
29 1 Hand wheel cover Z0200129 Piece 29 1 Hand wheel cover Z0200229 Piece
76 1 Dust protection cover Z0200176 Piece 76 1 Dust protection cover Z0200276 Piece

Not listed items are only available in the module!

Complete parts PREMIUM PRO 0,25 t Complete parts PREMIUM PRO 0,5 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
Top load hook assem- Top load hook assem-
46 1 bly, Item 31, 33 (2x), Z0200146 Set 46 1 bly, Item 31, 33 (2x), Z0200246 Set
34 (2x), 35 (2x), 47 34 (2x), 35 (2x), 47
Safety latch assembly, Safety latch assembly,
47 1 Z0200179 Set 47 1 Z0200247 Set
Item 36, 37, 38, 39 Item 36, 37, 38, 39
Load hook assembly, Load hook assembly,
Item 32, 41 (2x), Item 32, 41 (2x),
48 1 Z0200178 Set 48 1 Z0200248 Set
42, 43, 42, 43,
44 (2x), 45 (2x), 47 44 (2x), 45 (2x), 47
Friction plates assem- Friction plates assem-
49 1 Z0200149 Set 49 1 Z0200249 Set
bly, Item 24 (2x) bly, Item 24 (2x)
Overload protection Overload protection
50 1 assembly, Item 51, Z0200150 Set 50 1 assembly, Item 51, Z0200250 Set
52, 53, 54, 55, 56 52, 53, 54, 55, 56
Ratchet Pawl assem- Ratchet Pawl assem-
70 1 bly, Item 10 (2x), 11 Z0200170 Set 70 1 bly, Item 10 (2x), 11 Z0200270 Set
(2x), 13 (2x) (2x), 13 (2x)
Locking set assembly, Locking set assembly,
72 1 Z0200172 Set 72 1 Z0200272 Set
Item 7, 30 (2x) Item 7, 30 (2x)

11
Component parts PREMIUM PRO 1 t Component parts PREMIUM PRO 1,5 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
1 8 Locking nut Z0200301 Piece 1 8 Locking nut Z0200401 Piece
2 1 Gear box cap Z0200302 Piece 2 1 Gear box cap Z0200402 Piece
3 1 Washer Z0200303 Piece 3 1 Washer Z0200403 Piece
4 2 Gear wheel Z0200304 Piece 4 2 Gear wheel Z0200404 Piece
5 1 Driving shaft Z0200305 Piece 5 1 Driving shaft Z0200405 Piece
6 1 Center gear wheel Z0200306 Piece 6 1 Center gear wheel Z0200406 Piece
8 1 Right side plate Z0200308 Piece 8 1 Right side plate Z0200408 Piece
9 1 Top hook pin Z0200309 Piece 9 1 Top hook pin Z0200409 Piece
12 2 Chain guide roller Z0200312 Piece 12 2 Chain guide roller Z0200412 Piece
14 1 Load Chain sprocket Z0200314 Piece 14 1 Load Chain sprocket Z0200414 Piece
15 5 Hand chain Z0200315 m 15 5 Hand chain Z0200415 m
16 1 Left side plate Z0200316 Piece 16 1 Left side plate Z0200416 Piece
17 1 Chain stripper Z0200317 Piece 17 1 Chain stripper Z0200417 Piece
18 1 Chain suspension Z0200318 Piece 18 1 Chain suspension Z0200418 Piece
19 1 Split pin Z0200319 Piece 19 1 Split pin Z0200419 Piece
20 1 Pin Z0200320 Piece 20 1 Pin Z0200420 Piece
21 3 Load chain Z0200321 m 21 3 Load chain Z0200421 m
22 1 Name plate Z0200322 Piece 22 1 Name plate Z0200422 Piece
23 1 Brake seat Z0200323 Piece 23 1 Brake seat Z0200423 Piece
25 1 Ratchet disk Z0200325 Piece 25 1 Ratchet disk Z0200425 Piece
26 4 Name plate rivet Z0200326 Piece 26 4 Name plate rivet Z0200426 Piece
27 1 Split pin Z0200327 Piece 27 1 Split pin Z0200427 Piece
28 1 Castle nut Z0200328 Piece 28 1 Castle nut Z0200428 Piece
29 1 Hand wheel cover Z0200329 Piece 29 1 Hand wheel cover Z0200429 Piece
76 1 Dust protection cover Z0200376 Piece 76 1 Dust protection cover Z0200476 Piece

Not listed items are only available in the module!

Complete parts PREMIUM PRO 1 t Complete parts PREMIUM PRO 1,5 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
Top load hook assem- Top load hook assem-
46 1 bly, Item 31, 33 (2x), Z0200346 Set 46 1 bly, Item 31, 33 (2x), Z0200446 Set
34 (2x), 35 (2x), 47 34 (2x), 35 (2x), 47
Safety latch assembly, Safety latch assembly,
47 1 Z0200347 Set 47 1 Z0200447 Set
Item 36, 37, 38, 39 Item 36, 37, 38, 39
Load hook assembly, Load hook assembly,
Item 32, 41 (2x), Item 32, 41 (2x),
48 1 Z0200348 Set 48 1 Z0200448 Set
42, 43, 42, 43,
44 (2x), 45 (2x), 47 44 (2x), 45 (2x), 47
Friction plates assem- Friction plates assem-
49 1 Z0200349 Set 49 1 Z0200449 Set
bly, Item 24 (2x) bly, Item 24 (2x)
Overload protection Overload protection
50 1 assembly, Item 51, Z0200350 Set 50 1 assembly, Item 51, Z0200450 Set
52, 53, 54, 55, 56 52, 53, 54, 55, 56
Ratchet Pawl assem- Ratchet Pawl assem-
70 1 bly, Item 10 (2x), 11 Z0200370 Set 70 1 bly, Item 10 (2x), 11 Z0200470 Set
(2x), 13 (2x) (2x), 13 (2x)
Locking set assembly, Locking set assembly,
72 1 Z0200372 Set 72 1 Z0200472 Set
Item 7, 30 (2x) Item 7, 30 (2x)

12
Component parts PREMIUM PRO 2 t Component parts PREMIUM PRO 3 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
1 8 Locking nut Z0200501 Piece 1 8 Locking nut Z0200601 Piece
2 1 Gear box cap Z0200502 Piece 2 1 Gear box cap Z0200602 Piece
3 1 Washer Z0200503 Piece 3 1 Washer Z0200603 Piece
4 2 Gear wheel Z0200504 Piece 4 2 Gear wheel Z0200604 Piece
5 1 Driving shaft Z0200505 Piece 5 1 Driving shaft Z0200605 Piece
6 1 Center gear wheel Z0200506 Piece 6 1 Center gear wheel Z0200606 Piece
8 1 Right side plate Z0200508 Piece 8 1 Right side plate Z0200608 Piece
9 1 Top hook pin Z0200509 Piece 9 1 Top hook pin Z0200609 Piece
12 2 Chain guide roller Z0200512 Piece 12 2 Chain guide roller Z0200612 Piece
14 1 Load Chain sprocket Z0200514 Piece 14 1 Load Chain sprocket Z0200614 Piece
15 5 Hand chain Z0200515 m 15 5 Hand chain Z0200615 m
16 1 Left side plate Z0200516 Piece 16 1 Left side plate Z0200616 Piece
17 1 Chain stripper Z0200517 Piece 17 1 Chain stripper Z0200617 Piece
18 1 Chain suspension Z0200518 Piece 18 1 Chain suspension Z0200618 Piece
19 1 Split pin Z0200519 Piece 19 1 Split pin Z0200619 Piece
20 1 Pin Z0200520 Piece 20 1 Pin Z0200620 Piece
21 3 Load chain Z0200521 m 21 3 Load chain Z0200621 m
22 1 Name plate Z0200522 Piece 22 1 Name plate Z0200622 Piece
23 1 Brake seat Z0200523 Piece 23 1 Brake seat Z0200623 Piece
25 1 Ratchet disk Z0200525 Piece 25 1 Ratchet disk Z0200625 Piece
26 4 Name plate rivet Z0200526 Piece 26 4 Name plate rivet Z0200626 Piece
27 1 Split pin Z0200527 Piece 27 1 Split pin Z0200627 Piece
28 1 Castle nut Z0200528 Piece 28 1 Castle nut Z0200628 Piece
29 1 Hand wheel cover Z0200529 Piece 29 1 Hand wheel cover Z0200629 Piece
76 1 Dust protection cover Z0200576 Piece 76 1 Dust protection cover Z0200676 Piece

Not listed items are only available in the module!

Complete parts PREMIUM PRO 2 t Complete parts PREMIUM PRO 3 t
Item Qty. Description Part-No. Item Qty. Description Part-No.
Top load hook assem- Top load hook assem-
46 1 bly, Item 31, 33 (2x), Z0200546 Set 46 1 bly, Item 31, 33 (2x), Z0200646 Set
34 (2x), 35 (2x), 47 34 (2x), 35 (2x), 47
Safety latch assembly, Safety latch assembly,
47 1 Z0200547 Set 47 1 Z0200647 Set
Item 36, 37, 38, 39 Item 36, 37, 38, 39
Load hook assembly, Load hook assembly,
Item 32, 41 (2x), Item 32, 41 (2x),
48 1 Z0200548 Set 48 1 Z0200648 Set
42, 43, 42, 43,
44 (2x), 45 (2x), 47 44 (2x), 45 (2x), 47
Friction plates assem- Friction plates assem-
49 1 Z0200549 Set 49 1 Z0200649 Set
bly, Item 24 (2x) bly, Item 24 (2x)
Overload protection Overload protection
50 1 assembly, Item 51, Z0200550 Set 50 1 assembly, Item 51, Z0200650 Set
52, 53, 54, 55, 56 52, 53, 54, 55, 56
Ratchet Pawl assem- Ratchet Pawl assem-
70 1 bly, Item 10 (2x), 11 Z0200570 Set 70 1 bly, Item 10 (2x), 11 Z0200670 Set
(2x), 13 (2x) (2x), 13 (2x)
Locking set assembly, Locking set assembly,
72 1 Z0200572 Set 72 1 Z0200672 Set
Item 7, 30 (2x) Item 7, 30 (2x)

13
Component parts PREMIUM PRO 5 t
Item Qty. Description Part-No.
1 8 Locking nut Z0200701 Piece
2 1 Gear box cap Z0200702 Piece
3 1 Washer Z0200703 Piece
4 2 Gear wheel Z0200704 Piece
5 1 Driving shaft Z0200705 Piece
6 1 Center gear wheel Z0200706 Piece
8 1 Right side plate Z0200708 Piece
9 1 Top hook pin Z0200709 Piece
12 2 Chain guide roller Z0200712 Piece
14 1 Load Chain sprocket Z0200714 Piece
15 5 Hand chain Z0200715 m
16 1 Left side plate Z0200716 Piece
17 1 Chain stripper Z0200717 Piece
18 1 Chain suspension Z0200718 Piece
19 1 Split pin Z0200719 Piece
20 1 Pin Z0200720 Piece
21 3 Load chain Z0200721 m
22 1 Name plate Z0200722 Piece
23 1 Brake seat Z0200723 Piece
25 1 Ratchet disk Z0200725 Piece
26 4 Name plate rivet Z0200726 Piece
27 1 Split pin Z0200727 Piece
28 1 Castle nut Z0200728 Piece
29 1 Hand wheel cover Z0200729 Piece
76 1 Dust protection cover Z0200776 Piece

Not listed items are only available in the module!

Complete parts PREMIUM PRO 5 t
Item Qty. Description Part-No.
Safety latch assembly,
47 1 Z0200747 Set
Item 36, 37, 38, 39
Friction plates assem-
49 1 Z0200749 Set
bly, Item 24 (2x)
Overload protection
50 1 assembly, Item 51, Z0200750 Set
52, 53, 54, 55, 56
Top load hook
assembly, Item 40, 47,
57 1 Z0200757 Set
58 (2x), 59, 60 (3x), 61
(4x), 62
Load hook assembly,
Item 47, 64 (2x),
63 1 65, 66, Z0200763 Set
67 (2x), 68 (2x), 69
(2x), 71, 73 (2x)
Ratchet Pawl assem-
70 1 bly, Item 10 (2x), 11 Z0200770 Set
(2x), 13 (2x)
Locking set assembly,
72 1 Z0200772 Set
Item 7, 30 (2x)

14
11. Spare parts for Chain Hoist PREMIUM PRO 10 t

15
12. Spare Parts List for Chain PREMIUM PRO 10 t

Component parts PREMIUM PRO 10 t

Item Qty. Description Part-No.
1 8 Locking nut Z0200801 Piece
2 1 Gear box cap Z0200802 Piece
3 1 Washer Z0200803 Piece
4 2 Gear wheel Z0200804 Piece
5 1 Driving shaft Z0200805 Piece
6 1 Center gear wheel Z0200806 Piece
8 1 Right side plate Z0200808 Piece
9 1 Top hook pin Z0200809 Piece
12 2 Chain guide roller Z0200812 Piece
14 1 Load Chain sprocket Z0200814 Piece
15 5 Hand chain Z0200815 m
16 1 Left side plate Z0200816 Piece
17 1 Chain stripper Z0200817 Piece
18 1 Chain suspension Z0200818 Piece
19 1 Split pin Z0200819 Piece
20 1 Pin Z0200820 Piece
21 3 Load chain Z0200821 m
22 1 Name plate Z0200822 Piece
23 1 Brake seat Z0200823 Piece
25 1 Ratchet disk Z0200825 Piece
26 4 Name plate rivet Z0200826 Piece
27 1 Split pin Z0200827 Piece
28 1 Castle nut Z0200828 Piece
29 1 Hand wheel cover Z0200829 Piece
76 1 Dust protection cover Z0200876 Piece

Not listed items are only available in the module!

Complete parts PREMIUM PRO 10 t
Item Qty. Description Part-No.
Safety latch assembly,
47 1 Z0200847 Set
Item 36, 37, 38, 39
Friction plates assem-
49 1 Z0200849 Set
bly, Item 24 (2x)
Overload protection
50 1 assembly, Item 51, Z0200850 Set
52, 53, 54, 55, 56
Ratchet Pawl assem-
70 1 bly, Item 10 (2x), 11 Z0200870 Set
(2x), 13 (2x)
Locking set assembly,
72 1 Z0200872 Set
Item 7, 30 (2x)
Top load hook
assembly, Item 47, 77,
74 1 Z0200874 Set
78, 79, 80, 81, 82 (3x),
83 (3x)
Load hook assembly,
Item 47, 84, 85 (2x),
75 1 Z0200875 Set
86, 87, 88, 89 (2x), 90,
91 (2x)

16
13. Annual safety inspections

Name & Signature

Type of test Date Result
the examiner

17
 CE-Declaration of Conformity
in the sense of 2006/42/EC Guidelines, Appendix II A, 2004/108/EG,
Appendix I and 2006/95/EG, Appendix III

We herewith declare that the

PLANETA-Hebetechnik GmbH, Resser Straße 17, 44653 Herne

that the partly completed machinery

Chain Hoist Model PREMIUM PRO
in payload range 250 kg – 30.000 kg

which was developed for lifting and lowering of loads, in the standard version, including
load capacity control and meets the basic requirements for the following EC directives,
as applicable for the delivered scope:

EG-Maschine-Directive 2006/42/EG

Authorized for the compilation of the relevant technical documentation

Dipl.-Ing. Matthias B. Klawitter, CE-Koordinator,

PLANETA-Hebetechnik GmbH, Resser Straße 17, 44653 Herne

Herne, 08.06.2016 PLANETA-Hebetechnik GmbH

Dipl.-Ing. Christian P. Klawitter

(General Manager)

For the completion, installation and commissioning according to the operating

instructions is responsible

Location

Date

Person in charge

Company
Notes
Your responsible supplier

© PLANETA-Hebetechnik GmbH