Scribd
Upload
147 views

2T X 18.1 Span ELK Hoist Data Sheet

This document provides specifications for a monorail trolley with a wire rope hoist. Key details include: - It is valid for voltages of 380V-415V at 50Hz and can lift loads up to 2000kg at speeds of 5-20m/min. - The hoist motor is 0.23-1.6kW and the travel drives are 2x 0.03-0.12kW. - Dimensions include a rope diameter of 6.5mm, cable length of 41150mm, and drum diameter of 176mm. - The trolley span is 300mm and it can operate on tracks according to DIN 4132 load standards.

Uploaded by

Nael Swedan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views

2T X 18.1 Span ELK Hoist Data Sheet

This document provides specifications for a monorail trolley with a wire rope hoist. Key details include: - It is valid for voltages of 380V-415V at 50Hz and can lift loads up to 2000kg at speeds of 5-20m/min. - The hoist motor is 0.23-1.6kW and the travel drives are 2x 0.03-0.12kW. - Dimensions include a rope diameter of 6.5mm, cable length of 41150mm, and drum diameter of 176mm. - The trolley span is 300mm and it can operate on tracks according to DIN 4132 load standards.

Uploaded by

Nael Swedan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

valid for 380 V - 415 V / 50 Hz

load capacity 2000 kg travelling speed 5 / 20 m/min


FEM group 4m / M7 lifting speed 0.7 / 4 m/min
hook path 9000 mm trolley span 300 mm
drives
hoist motor travel drive (2 drives)
motor type L trolley E 100
performance 0.23 / 1.6 kW 2 x 0.03 / 0.12 kW
duty cycle 60 % 50 %
no. of switching operations 420 c/h 300 c/h
nominal speed 435 / 2850 1/min 640 / 2670 1/min
rated current 1.8 / 4.4 A 0.29 / 0.46 A
starting current 2.9 / 22 A 0.4 / 1.2 A
cos phiN 0.54 / 0.73 0.67 / 0.85
cos phiA 0.73 / 0.8 0.85 / 0.94
ED (c/h) values represent the sum of the values for precision and main lifting
These are divided up into 1/3 (2/3) operation with precision and 2/3 (1/3) operation with main speed

dimensions and weights


rope diameter 6.5 mm A 391 mm I 70 mm
cable length 41150 mm B 474 mm K 70 mm
drum diameter 176 mm C 400 mm M 114 mm
rope pulley diameter 162.5 mm D 100 mm Nmin 98 mm
weight of bottom block 15.0 kg E 20 mm Nmax 500 mm
load hook (E) 1.0 - V F 25 mm R 746 mm
radius of curves  6650 mm G 280 mm T 216 mm
weight 266 kg H 176 mm Tfl 30 mm
trolley span 300 mm
Wheels suitable to be used on parallel flanges; wheels for inclined flanges upon request
When using a trolley travel limit switch dimension H will increase by 55 mm
Dimension C with bigger load hooks and track N > 300 mm on request
Smaller tracks upon request
load data for the track according to DIN 4132
load case H load case HZ load case HS
Rmax 1) / wheel RKAmin 2) / wheel RKAmit 3) / wheel FSKA 4) / hoist FMKA 5) / hoist FPUKR 6) / hoist
7.62 kN 0.65 kN 5.56 kN 1.11 kN 0.39 kN 6.2 kN
1) Wheel load with highest hook position without coefficient 4) Loads transverse to the runway (hoist)
2) Wheel load under dead weight without coefficient 5) Loads along the runway (hoist)
3) Wheel load with mean hook position without coefficient 6) Buffer force valid when using ABUS buffers (hoist)
ABUS Kransysteme GmbH monorail trolley with wire rope hoist
Sonnenweg 1 GM 800.2000 L-164.41.9000.4.E 100.20
51647 Gummersbach quotation: 065700-0015265-20230517-05 / 1 15/04/2010

© ABUS Kransysteme GmbH, subject to change, ABUKonfis Version 5.21w105

You might also like