SHORT CUT R

Create
CM PLACE A COMPONENT / Place a component.
D ALIGNED DIMENSION / Creates an aligned dimension.
FR FIND/REPLACE / Find and replace.
GP MODEL GROUP:CREATE GROUP; DETAIL GROUP:CREATE GROUP / Creates a group of elements.
LI MODEL LINE; BOUNDARY LINE; REBAR LINE / Places a new line.
LL LEVEL / Places a level in view.
MD MODIFY / Enters selection mode to select elements to modify.
PP or CTRLPROPERTIES; TOGGLE PROPERTIES PALETTE / Toggles the Properties palette.
RP REFERENCE PLANE / Creates a reference plane using drawing tools.
TX TEXT / Adds text
Manage
ES MEP SETTINGS:ELECTRICAL SETTINGS / Accesses dialog box to specify wiring parameters, voltages definitions, distri
MS MEP SETTINGS:MECHANICAL SETTINGS / Accesses dialog box to configure component sizes, and the behavior and a
SU ADDITIONAL SETTINGS:SUN SETTINGS / Opens the sun settings dialog box.
UN PROJECT UNITS / Opens the Project Units tool.
Modify
AL ALIGN / Aligns one or more elements with selected element.
AR ARRAY / Creates a linear or radial array of selected elements.
CO or CC COPY / Copies selected element(s).
CP COPE; APPLY COPING / Applies coping to steel beam or columns.
CS CREATE SIMILAR / Creates an element of the same type as the selected element.
DE DELETE / Removes selected element(s) from the building model.
DI ALIGNED DIMENSION / Creates an aligned dimension.
DM MIRROR - DRAW AXIS / Reverses the position of a selected model element, using a user-generated line as the mirro
EH HIDE IN VIEW:HIDE ELEMENTS / Hides an element from view.
EL SPOT ELEVATION / Displays the elevation of a selected point.
EOD OVERRIDE GRAPHICS IN VIEW:OVERRIDE BY ELEMENT / Changes the graphic display settings for selected elements
LI MODEL LINE; BOUNDARY LINE; REBAR LINE / Places a new line.
LW LINEWORK / Overrides the line style of selected line in the active view only.
MA MATCH TYPE PROPERTIES / Opens the Match Type tool to convert one or more elements to match the type assigne
MM MIRROR - PICK AXIS / Reverses the position of a selected model element, using a selected line as the mirror axis.
MV MOVE / Moves a selected element.
OF OFFSET / Moves a selected model line, detail line, wall, or beam a specified distance perpendicular to its length.
PN PIN / Locks a model element in place.
PP or CTRLPROPERTIES; TOGGLE PROPERTIES PALETTE / Toggles the Properties palette.
PT PAINT / Opens the Paint tool.
RC COPE:REMOVE COPING / Removes coping.
RE SCALE / Resizes the selected element.
RO ROTATE / Rotates selected element around an axis.
RP REFERENCE PLANE / Creates a reference plane using drawing tools.
SF SPLIT FACE / Divides the face of an element into regions for application of different materials.
SL SPLIT ELEMENT / Cuts an element (such as a wall or line) at a selected point.
TR TRIM/EXTEND TO CORNER / Trims or extend one or more elements to form a corner.
UP UNPIN / Unpins an element that is locked in position or an element that is driven by its host system.
VH HIDE IN VIEW:HIDE CATEGORY / Hides an element category from view.
 SHORT CUT REVIT CHAPTER 3

ers, voltages definitions, distribution systems, cable tray and conduit settings, and load calculation and circuit numbering settings.
t sizes, and the behavior and appearance of the mechanical systems.

er-generated line as the mirror axis.

ettings for selected elements in the current view.

ents to match the type assigned to another element.

perpendicular to its length.