PHILIPPGROUP

Transport and mounting systems for prefabricated units

VB3-PÜ-002-en - 09/19 - 1/500

Product Range
Version: 2019
 Our aims–
ambitious, customer-focused and feasible!

Our main objective is to achieve the highest-possible

customer satisfaction serving best service and well-engi-
neered products.
Individual challenges we meet with customized solutions.

Benefit from our competence.

Being dedicated to progress we combine keeping proven

solutions and integrating successful grown structures into
technological advance.
We have managed this so far. Today our company shows
Dear partner,
stability in performance, customer services, high quality
standards and personal commitment. Frequent TÜV certifi-
The PHILIPPGROUP headquartered in Aschaffenburg,
cations in accordance to EN ISO 9001 documents these
Germany, is family-owned and one of the largest
efforts.
midsize companies in northern Bavaria and operates
as an international production and trading company
We thank you for your interest and confidence.
successfully.

With about 300 employees at four different locations

and more than 30 strategic partners abroad, we are one
of the leading suppliers of transport and mounting sys-
tems for prefabricated concrete buildings, hydraulics,
pneumatics and power units as well as lashing/lifting
equipment and wire rope technology. Thorsten Philipp and his team
Numerous patents and industrial property rights reflect
our innovative strength and technical know-how.
 PHILIPPGROUP

The world is in motion.

We provide it support.

More than 45 years

of trust

PHILIPPGROUP
 PHILIPP – Strength and stability
It is an undisputed fact that building with precast con-
crete elements offers many planning and economic ad-
vantages in the construction of modern industrial and
office buildings as well as all kind of commercial con-
structions. Hereby, diverse structural precast concrete
elements take over multiple functions in the typical
skeleton construction. In this case the use of high-ca-
pacity and high-quality components is almost a matter
of course and an integral part of modern prefabricated
construction.

PHILIPP offers among other things for the product

groups connection, facade and fixing technology and,
in particular, transport anchor systems a wide range of
products and thus numerous technical solutions for a
variety of applications. In addition to a high product
quality, structural engineers and precast concrete in-
dustry benefit primarily from our high motivation for
best service. Individual technical support, competent
advice and user-friendly documentation as well as
software solutions (freeware) are the focus here.

If you have any questions about our product range,

please do not hesitate to contact us at any time. For
a first overview, we have summarised the most impor-
tant technical information in this brochure - solutions,
which support you!

4 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Transport anchor systems Page 6

Threaded transport anchor system Page 8
Spherical head anchor system Page 38
Hole anchor system Page 52
Cast-in lifting hoops Page 62
Further systems Page 70

Connecting technology Page 74

German approved systems for high forces Page 76
Constructive rails and connecting loops Page 82
Restraint dowel plate / Dowelling system Page 86

Facade technology Page 90

Sandwich panel anchor system SA / FA Page 92
Sandwich panel anchor system SPA Page 98
Sandwich FT Anchor Page 102

Fixing technology Page 106

Fixing sockets Page 108
Corner guards Page 112

Noise reduction system Page 118

Bearing system with noise reduction Page 120

Earthing technology Page 126

Earthing sleeve Page 128
Earthing connectors Page 129

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 5
 Transport and mounting – with safety
Transport anchors face daily "heavy" challenges during transport and mounting of precast concrete ele-
ments. Here, both the safety of people in the precast factory and on the construction site as well as the
safety in use are always in the centre of attention. Precisely and high-grade produced transport anchors
from PHILIPP prove the quality and thus create the required safety. Continuous quality assurance activities
additionally create confidence.
A suitable solution for almost every transport and mounting process of precast concrete elements of all kind
can be offered by PHILIPP. Although PHILIPP meets the constantly increasing requirements with product
optimizations of its standard portfolio or individually adapted solutions.
On the one hand, transport anchors are not subject to approval, on the other hand, both the so-called Ma-
chinery Directive and the VDI/BV-BS 6205 guideline series define in detail their manufacture, design and
application. The consistent CE-marking of the PHILIPP transport anchor systems is done on the basis of
these guidelines.
For each anchor system a detailed Installation and Application Instruction is available, providing important
information on prerequisites, reinforcement, load-bearing capacities (for steel and concrete) and much more.
Transport anchor systems

6 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Transport anchor systems

Threaded transport anchors for the lifting of e.g. wall-like elements Page 8
Threaded transport anchors for the lifting of e.g. slab-like elements Page 18
Lifting devices / accessories Page 24
Transport loop system (TPS system) Page 28
Power System SL Page 32
Spherical head anchors for the lifting of wall-like elements Page 38
Spherical head anchors in tubes, manholes, shafts and slab-like elements Page 46
Hole anchor system Page 52
Lifting hoops Page 62
Further systems Page 70

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 7
 Threaded transport anchors
Transport anchor systems

for the lifting of e.g. wall-like elements

The different Threaded anchor systems combine on the
one side a uniform thread system (RD or metric thread)
for screwing in various lifting devices and on the other
side specific designs for versatile applications, especially
for walls resp. wall-like elements.
For challenges such as thin element thickness, low em-
bedment depth due to less space, architectural con-
crete or inclinations of the concrete element the
Threaded transport anchors are prepared and
offer individually adapted solutions.
A wide range of accessories with lifting
devices, retaining and sealing caps com-
pletes the Threaded anchor system com-
prehensively.

Recommended use

Walls Floor and roofing slabs Shafts / manholes

Sandwich panels Bar-shaped elements

Beam Stairs

Features and benefits compact

Threaded transport anchors are totally embedded in the concrete element
Special RD thread is resistant to concrete dust, sand and other dirt
Small, optimized recesses on the concrete surface (KH-system)
Clear colour code for identification in the entire system
Bearing capacities from 0.5 t up to 20 t
Save load transfer by optimized anchorage of the reinforcing bar and / or design of the anchor
Normally suitable for all lifting directions (axial, diagonal, lateral)
Reinforcement optimized for effectiveness
Well graded type series and bearing capacities for economical use
Sockets available galvanised or in stainless steel

8 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor overview
Recommended use Transport anchor Types

Version: straight tail RD 12 - RD 60

Version: offset RD 30 - RD 52
Walls
Version: long wavy tail, Compact anchor, Lifting insert with cross hole RD 12 - RD 52
Lifting insert with crimped end RD 12 - RD 30
Version: straight tail RD 12 - RD 60
Beams and girders Version: long wavy tail, Compact anchor, Lifting insert with cross hole RD 12 - RD 52
Lifting insert with crimped end RD 12 - RD 30
Version: straight tail RD 12 - RD 60
Shafts / manholes
Compact anchor RD 12 - RD 52
Floor and roofing slabs / stairs Compact anchor RD 12 - RD 52

Version: straight tail Version: offset Version: long wavy tail Compact anchor

Lifting insert with cross hole Lifting insert with crimped end Threaded anchor elongation

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 9
 Threaded transport anchors for the lifting of e.g. wall-like elements

Threaded transport anchor - straight tail

Straight tail threaded transport anchors can be used universally

for various precast concrete elements on the one hand, but on the
other hand they can show their capabilities in e.g. bar-shaped el-
ements or walls. Either with extremely thin or heavy prefabricated
elements – depending on the element type and its dimensions dif- Øds
L
ferent sizes are available. Axial-, diagonal and lateral tension are
no problem for the threaded anchor with straight tail.
In combination with the Steel recess former SZ15 (see page 26),
additional reinforcement elements can be omitted with this
threaded anchor.

Threaded transport anchor - straight tail Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions Lateral tension (γmax 90°)
galvanised bearing capacity
L Øds
[kN] [mm] [mm] Axial tension (βmax 12.5°)
67M12 RD 12 5.0 195 8 Diagonal tension (βmax 45°)
67M14 RD 14 8.0 235 10
67M16 RD 16 12.0 275 12
67M18 RD 18 16.0 305 14
67M20 RD 20 20.0 355 16
67M24 RD 24 25.0 405 16
67M30 RD 30 40.0 505 20
67M36 RD 36 63.0 690 25
67M42 RD 42 80.0 840 28
67M52 RD 52 125.0 900 32
67M56 RD 56 150.0 1200 36
67M60 RD 60 200.0 1400 40
Types 12 - 52 also available in version stainless steel (ref.-no. 75M__VA)

PHILIPPGROUP

PHILIPP Threaded transport anchor For further details of the application and design of the threaded transport anchor
straight tail please refer to our website www.philipp-group.de.
VB3-T-002-en - 02/18 - PDF

Version: straight tail

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

10 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Threaded transport anchor - with offset

Especially for balancing the inclination during the lifting process

of sandwich panels the offset version of the threaded anchor has
been developed. The special shape of the offset anchor enables
the transport and mounting process (nearly) in the centre line of
the precast element. Hereby, axial and diagonal tension can easily
Ls
be realized with the offset threaded anchor.

Øds

Threaded transport anchor - with offset Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions
galvanised bearing capacity
Ls a Øds Axial tension (βmax 12.5°)
[kN] [mm] [mm] [mm] Diagonal tension (βmax 30°)
67M30GK RD 30 40.0 750 60 20
67M36GK RD 36 63.0 950 60 25
67M42GK RD 42 80.0 1100 70 28
67M52GK RD 52 125.0 1400 90 32
Also available in version stainless steel (ref.-no. 75M__VAGK).

PHILIPP Threaded transport anchor For further details of the application and design of the threaded transport anchor
with offset please refer to our website www.philipp-group.de.
T-054-en - 01/17
VB3-T-054-en

Version: offset

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 11
 Threaded transport anchors for the lifting of e.g. wall-like elements

Threaded transport anchor - long wavy tail

The Threaded anchor long wavy tail also offers a wide range of
applications. Its speciality lies primarily in walls as well as bar-
shaped elements (purlin, waler, beams etc.). With the waveform
and the ribbed reinforcing steel, modes of operation are combined
in the concrete and thus enable shorter embedment depths. All
load directions can be realised with the Threaded anchor long L
wavy tail easily. Øds

Threaded transport anchor - long wavy tail Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions Lateral tension (γmax 90°)
galvanised bearing capacity
L Øds
[kN] [mm] [mm] Axial tension (βmax 12.5°)
67M12WE RD 12 5.0 137 8 Diagonal tension (βmax 45°)
67M14WE RD 14 8.0 170 10
67M16WE RD 16 12.0 216 12
67M18WE RD 18 16.0 235 14
67M20WE RD 20 20.0 257 16
67M24WE RD 24 25.0 350 16
67M30WE RD 30 40.0 450 20
67M36WE RD 36 63.0 570 25
67M42WE RD 42 80.0 620 28
67M52WE RD 52 125.0 750 32
Also available in version stainless steel (ref.-no. 75M__VAWE).

PHILIPPGROUP

PHILIPP Threaded transport anchor For further details of the application and design of the Threaded transport anchor
long wavy tail please refer to our website www.philipp-group.de.
VB3-T-003-en - 07/18 - PDF

Version: long wavy tail

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

12 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Compact anchor

An extremely wide range of applications can be realised with the

Compact anchor due to the combination of a compressed foot
and a plain round steel bar. Because of the very short embedment
depth the Compact anchor is typically suitable for special wall ge-
L
ometries with less space, but also for use in stairs and slabs, for
example. Axial-, diagonal and lateral tension are no problem for
the Compact anchor.

Compact anchor Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension Lateral tension (γmax 90°)
galvanised bearing capacity
L
[mm] [kN] Axial tension (βmax 12.5°)
67K120100 100 Diagonal tension (βmax 45°)
RD 12 5.0
67K120150 150
67K140105 105
RD 14 8.0
67K140140 140
67K160130 130
RD 16 12.0
67K160175 175
67K180150 150
RD 18 16.0
67K180225 225
67K200185 185
RD 20 20.0
67K200250 250
67K240200 200
RD 24 25.0
67K240275 275
67K300275 275
RD 30 40.0
67K300350 350
67K360334 334
RD 36 63.0
67K360450 450
67K420385 385
RD 42 80.0
67K420500 500
67K520550 550
RD 52 125.0
67K520700 700
Also available in version stainless steel (ref.-no. 75K_____VA).

PHILIPP Compact anchor For further details of the application and design of the Compact anchor please refer
to our website www.philipp-group.de.
VB3-T-005-en - 01/16

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 13
 Threaded transport anchors for the lifting of e.g. wall-like elements

Lifting insert with cross hole

Lifting inserts with cross hole are simple but versatile transport
anchors within the PHILIPP Threaded anchor system. The applied
force into the precast concrete element - typically walls or bar-
shaped elements - is done via the reinforcement to be planned
separately and inserted through the cross hole. Axial-, diagonal L
and lateral tension are no problem for the Lifting insert with cross
hole.

Lifting insert with cross hole Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension Lateral tension (γmax 90°)
galvanised bearing capacity
L
[kN] [mm] Axial tension (βmax 12.5°)
71HM12 RD 12 5.0 40 Diagonal tension (βmax 45°)
71HM14 RD 14 8.0 47
71HM16 RD 16 12.0 55
71HM18 RD 18 16.0 65
71HM20 RD 20 20.0 67
71HM24 RD 24 25.0 77
71HM30 RD 30 40.0 105
71HM36 RD 36 63.0 125
71HM42 RD 42 80.0 145
71HM52 RD 52 125.0 195
Also available in version stainless steel (ref.-no. 77HM__VA).

PHILIPP Lifting insert with cross hole For further details of the application and design of the Lifting insert with cross hole
please refer to our website www.philipp-group.de.
VB3-T-011-en - 01/18

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

14 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Lifting insert with crimped end

For rather light elements such as small walls or bar-shaped ele-

ments, the Lifting insert with crimped end is a simple and often
used transport anchor system. The applied force into the precast
concrete element is done via the reinforcement to be planned sep-
L
arately and inserted through the cross hole. With the Lifting insert
with crimped end all load directions can be realised without any
problems.

Lifting insert with crimped end Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension Lateral tension (γmax 90°)
galvanised bearing capacity
L
[kN] [mm] Axial tension (βmax 12.5°)
71Ö12 RD 12 5.0 60 Diagonal tension (βmax 45°)
71Ö14 RD 14 8.0 70
71Ö16 RD 16 12.0 77
71Ö18 RD 18 16.0 85
71Ö20 RD 20 20.0 92
71Ö24 RD 24 25.0 105
71Ö30 RD 30 40.0 135
Also available in version stainless steel (ref.-no. 77Ö__VA).

PHILIPP Lifting insert with crimped end For further details of the application and design of the Lifting insert with crimped
end please refer to our website www.philipp-group.de.
VB3-T-012-en - 01/18

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 15
 Threaded transport anchors for the lifting of e.g. wall-like elements

Elongation for threaded transport anchors

The anchor elongation is intended for applications where it is not

possible to lift off directly at the transport anchor. E.g. with cu-
bicles in prefabricated construction with subsequently mounted
roof element, the transport of the complete module is thus pos-
sible. Here, the elongation is screwed into an existing threaded
transport anchor (of the cubicle) through a recess in the roofing
slab. LV.min

Elongation for threaded transport anchors

Ref.-No. Type Steel Dimensions
galvanised bearing capacity
for thread LV.min
[kN] [RD / M] [mm] FZ (βmax 12.5°)
67AVL12___ RD 12 5.0 12 40
67AVL16___ RD 16 12.0 16 55
67AVL20___ RD 20 20.0 20 65
LV
67AVL24___ RD 24 25.0 24 75
67AVL30___ RD 30 40.0 30 105
67AVL36___ RD 36 63.0 36 110
67AVL42___ RD 42 80.0 42 135
67AVL52___ RD 52 125.0 52 180
The elongation length LV has to be added to the reference number

PHILIPP Threaded transport anchor elongation For further details of the application and design of the Threaded transport anchor
elongation please refer to our website www.philipp-group.de.
VB3-T-055-en - 08/18

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

16 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 17
 Threaded transport anchors
Transport anchor systems

for the lifting of e.g. slab-like elements

The different Threaded anchor systems combine on the
one side a uniform thread system (RD or metric thread)
for screwing in various lifting devices and on the other
side specific designs for versatile applications, especially
for slabs resp. slab-like elements.
For challenges such as thin slab elements (and the re-
sulting low embedment depth), the Threaded trans-
port anchors are prepared and offer individually
adapted solutions.
A wide range of accessories with lifting
devices, retaining and sealing caps com-
pletes the Threaded anchor system com-
prehensively.

Recommended use

Floor and roofing slabs

Features and benefits compact

Threaded transport anchors are totally embedded in the concrete element
Special RD thread is resistant to concrete dust, sand and other dirt
Small optimized recesses on the concrete surface (KH system)
Clear colour code for identification in the entire system
Bearing capacities from 0.5 t up to 12.5 t
Save load transfer by optimized anchorage of the reinforcing bar and / or design of the anchor
Suitable for axial and diagonal tension
Reinforcement optimized for effectiveness
Well graded type series and bearing capacities for economical use
Sockets available galvanised or in stainless steel

18 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor overview
Recommended use Transport anchor Types

Version: short wavy tail RD 12 - RD 42

Floor and roofing slabs Screw anchor RD 12 - RD 30
Capped end anchor RD 12 - RD 52

Version: short wavy tail Screw anchor Capped end anchor

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 19
 Threaded transport anchors for the lifting of e.g. slab-like elements

Threaded transport anchor - short wavy tail

The Threaded anchor short wavy tail is intended for use exclu-
sively in slab-like elements. With the waveform and the ribbed re-
inforcing steel, modes of operation are combined in the concrete
and thus enable shorter embedment depths. The load directions
axial and diagonal tension are available without restrictions for
this anchor type. L
Øds

Threaded transport anchor - short wavy tail

Ref.-No. Type Steel Dimensions
galvanised bearing capacity Axial tension (βmax 12.5°)
L Øds Diagonal tension (βmax 45°)
[kN] [mm] [mm]
67M12K RD 12 5.0 110 8
67M14K RD 14 8.0 130 10
67M16K RD 16 12.0 170 12
67M18K RD 18 16.0 175 14
67M20K RD 20 20.0 187 16
67M24K RD 24 25.0 240 16
67M30K RD 30 40.0 300 20
67M36K RD 36 63.0 380 25
67M42K RD 42 80.0 450 28
Also available in version stainless steel (ref.-no. 75M__VAK).

PHILIPP Threaded transport anchor For further details of the application and design of the Threaded transport anchor
short wavy tail please refer to our website www.philipp-group.de.
VB3-T-004-en - 01/16

Version: short wavy tail

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

20 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Screw anchor

Due to their low embedment depth, screw anchors are the ideal
solution for light, thin slab-like precast concrete elements. In ad-
dition, under certain conditions the additional reinforcement for
diagonal tension can be omitted, so that the installation of the
screw anchor is quite simple. The load directions axial and diago- L
nal tension are available without restrictions for this anchor type.

Screw anchor
Ref.-No. Type Steel Dimension
galvanised bearing capacity Axial tension (βmax 12.5°)
L Diagonal tension (βmax 45°)
[kN] [mm]
67SA12 RD 12 5.0 60
67SA14 RD 14 8.0 70
67SA16 RD 16 12.0 80
67SA18 RD 18 16.0 90
67SA20 RD 20 20.0 100
67SA24 RD 24 25.0 115
67SA30 RD 30 40.0 150
Also available in version stainless steel (ref.-no. 75SA__VA).

PHILIPP Screw anchor For further details of the application and design of the Screw anchor please refer to
our website www.philipp-group.de.
VB3-T-007-en - 01/16

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 21
 Threaded transport anchors for the lifting of e.g. slab-like elements

Capped end anchor

Also specialised for the transport of slab-like elements is the

Capped end anchor with the lowest embedment depth of the
Threaded anchor system. However, the Capped end anchor is
highly efficient and offers load bearing capacities up to 12.5 t per
anchor. Axial and diagonal tension are possible load directions
for this anchor type. The anchor available in two length variants
allows the installation of straight or bended anchorage reinforce-
L
ment.
b a

Capped end anchor

Ref.-No. Type Steel Dimensions
galvanised bearing capacity Axial tension (βmax 12.5°)
L a b Diagonal tension (βmax 45°)
[kN] [mm] [mm] [mm]
71FL12 30
RD 12 5.0 25 35
71FL12L 50

71FL14 RD 14 8.0 33 35 35

71FL16 35
RD 16 12.0 35 50
71FL16L 70

71FL18 RD 18 16.0 44 45 60

71FL20 47
RD 20 20.0 60 60
71FL20L 80
71FL24 54
RD 24 25.0 60 80 Axial tension (βmax 12.5°)
71FL24L 100
Diagonal tension (βmax 45°)
71FL30 72
RD 30 40.0 80 100
71FL30L 120
71FL36 84
RD 36 63.0 100 130
71FL36L 140
71FL42 98
RD 42 80.0 130 130
71FL42L 160
71FL52 119
RD 52 125.0 130 150
71FL52L 200
Also available in version stainless steel (ref.-no. 77FL__VA).

PHILIPP Capped end anchor For further details of the application and design of the Capped end anchor please
refer to our website www.philipp-group.de.
VB3-T-009-en - 07/19 - PDF

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

22 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 23
 Lifting devices / accessories
Transport anchor systems

The wide range of accessories for the Threaded trans-

port anchor system convinces with its variety and well-
thought-out combination possibilities for the different
lifting devices resp. corresponding recess formers and
sealing caps. No matter whether standard sizes or par-
ticularly small recesses are required, the wide choice of
system components leaves nothing to be desired.

Features and benefits compact

General
Perfectly matched components for the Threaded transport anchor system
 igh quality in production, continuous testing of safety-relevant parts
H
Systems / components that have been established as standard in precast construction for many years

Lifting devices
Wide range of lifting devices for every requirement on the lifting and transport of precast concrete elements
 ll lifting devices applicable for axial, diagonal and lateral lifting situations
A
Optimal technical coordination between lifting device and Threaded transport anchor
All lifting devices available with metric thread or special round thread (RD) with a metric pitch
High-quality and tested lifting devices
Clear colour code for identification in the entire system

Accessories
Marking rings (plastic) for a safe assignment of transport anchors and lifting devices
 ide range of retaining caps and recess formers coordinated with the lifting devices
W
Sealing caps in different materials, dimensions exactly matched to retaining caps and recess formers

24 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

KHN system WS system KH system

Lifting loop Lifty Lifty with wire rope Wirbelstar Wirbelstar KH

sion

sion

sion

sion

sion
Axial ten

D
Axial ten

Axial ten

Axial ten

Axial ten
ia D D D D
ia ia ia ia
go go go go go
on

n
io

io

io

io
na na na na na
si

s
en

en

en

en

en
lt lt lt lt lt
en en en en en
lt

lt

lt

lt

lt
no
na

na

na

na

ta si si si si si na
on wed on on on on
go

llo
go

go

go

go
we allo
ia

ia

ia

ia

ia

d not
D

Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 25
 Lifting devices / Accessories

Marking rings Lifting devices

Lifting loop Lifting loop Lifty Lifty with wire Wirbelstar Wirbelstar KH
The PHILIPP Marking rings ensure an easy and safe
with Adapter rope
classification of installed Threaded transport an-
for lateral tension rotatable rotatable
chor and lifting device which has to be used.
under load under load
Marking ring
System: standard M/RD
Sizes: Type 12 to 60
Ref.-no.: 74KR__

Marking ring with clip

System: standard M/RD
Sizes: Type 12 to 52
Ref.-no.: 74KR__CLIP

ion

ion

ion

ion

ion
ion

Axial tens

Axial tens

Axial tens

Axial tens

Axial tens
Axial tens
D D D D D D
ia ia ia ia ia ia
go go go go go

n
go

io

io

io

io

io
na na na na na

io
na

ns

ns

ns

ns

ns
ns
l te l te l te l te l te

l te

l te

l te

l te

l te
l te

l te
ns ns ns ns ns

na

na

na

na

na
no ns

na
t al io io io io io io
wed

go

go

go

go

go
n n n n n
go
low n allo

ia

ia

ia

ia

ia
ed ia
not

D
D

Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension Lateral tension

Sizes: Sizes: Sizes: Sizes: Sizes: Siz

12 to 52 12 to 52 12 to 52 12 to 36 12 to 60 12 to
Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.
RD-thread 69RD__ 69M__Q90 RD-thread 62LI__ RD-thread 62LI__DS RD-thread 62WS__ RD-thread
M-thread 69M__ M-thread 62LI__M M-thread 62LI__MDS M-thread 62WS__M M-thread 6

Plane to surface
- - -

Plastic recess former KHN

Sizes: Type 12 to 52 - -
Ref.-no.: 72KHN__

Steel recess former KHN

KHN system (Lifty)

Sizes: Type 12 to 52 - -
Ref.-no.: 72KHN__STK

Magnetic recess former KHN

Sizes: Type 12 to 52 - -
Ref.-no.: 72MAXKHN__

Steel recess former SZ15

Fixations / recess formers

Sizes: Type 12 to 52 - - -
Ref.-no.: 72KHN__SZ15

Plastic recess former WS

Sizes: Type 36 to 52 - - - -
Ref.-no.: 72KHN__WS
WS system (Wirbelstar)

Steel recess former WS

Sizes: Type 12 to 60 - - - -
Ref.-no.: 72SAT__K

Magnetic recess former WS

Sizes: Type 12 to 52 - - - -
Ref.-no.: 72SATM__K

Plastic retaining cap KH

Sizes: Type 12 to 24 - - -
KH system (Wirbelstar KH)

Ref.-no.: 72KH__

Steel retaining cap KH

Sizes: Type 12 to 52 - - -
Ref.-no.: 72KH__STAHL
Type 12-24
Type 30-52
Magnetic retaining cap KH
Sizes: Type 12 to 52 - - -
Ref.-no.: 72MAXKH__

Sizes 56 and 60 only with RD-thread, diagonal tension ≤ 30° possible, diagonal tension > 30° and lateral tension not possible.
Special solutions of fixations, nailing plates and sealing caps on request!
This is just a summary of our product range, which is only valid with appropriate Installation and Application Instructions, and datasheets of accessories.

26 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Sealing caps 
Wirbelstar KH Plastic Stainless steel Plastic Stainless steel Plastic Plastic Stainless steel Stainless steel
with KH ring (concrete grey) with slot (concrete grey) with slot (concrete grey) (concrete grey) with slot
rotatable or or or
under load internal hexagon internal hexagon internal hexagon

...-S

...-S
...-S

...-ISK
ion

...-ISK
Axial tens

...-ISK
D
ia
go
n
io

na
ns

l te
l te

ns
na

io
go

n
ia
D

Lateral tension Lateral tension

zes: Sizes: Sizes: Sizes: Sizes: Sizes: Sizes: Sizes: Sizes:

o 52 12 to 52 12 to 52 12 to 52 12 to 60 12 to 52 12 to 24 12 to 52 12 to 52
.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no. Ref.-no.
62WS__KH 72ASS__ 72ASKHN__VA 72ASKHN__ 72ASSAT__VA 72ASO1224PLAN 72ASO 72ASO__VA 72ASO1224VA
62WS__MKH 72ASO3042PLAN 72ASO3042VA
72ASO52PLAN 72ASO52VA

- - - - - - -

- - - - - -
PHILIPP Ø40

- - - - - -
PHILIPP Ø40

- - - - - -
PHILIPP Ø40

- - - - - - - -

- - - - - -

- - - - - -

- - - - - -

- - - - -

- - - - -

- - - - -

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 27
 Transport loop system (TPS system)
Transport anchor systems

While constructive precast concrete elements can usual-

ly be transported and mounted using standard transport
anchor systems, special prefabricated elements require
particular solutions. Shafts and manholes in various di-
mensions, tubes but also retaining walls are typical el-
ements for the use of the Transport loop system (TPS
system). A lifting loop at a right angle to the transport an-
chor enables these special elements to be lifted directly
in the production or mounting state.

Recommended use

Shafts / manholes Tanks

Features and benefits compact

Reusable lifting device
Threaded transport anchors are totally embedded in the concrete element
Special RD thread is resistant to concrete dust, sand and other dirt
Load bearing capacities up to 6.3 t
Only suitable for lateral tension
Reinforcement optimized for effectiveness
Threaded socket electro-galvanised.

28 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Transport loop Transport anchor TPS 16 + 24 Transport anchor TPS 30 Transport anchor TPS 36

Application for shafts and manholes Application for tanks

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 29
 Transport loop system (TPS-system)

Transport loop

The Transport loop system (TPS) has been specially developed for
the transport of (thin-walled) pipe and manhole elements as well
as light, retaining walls or similar. In particular, the combination
of a simple, short anchor and a screw-on and therefore reusable
lifting loop makes this system so attractive.

Transport loop
Ref.-No. Type Bearing Dimension
capacity L
[kN] [mm]
67TPS122000 TPS 16 20.0 280
67TPS154000 TPS 24 40.0 310
67TPS185200 TPS 30 52.0 390
67TPS206300 TPS 36 63.0 525 not
permissible

PHILIPP Transport loop system For further details of the application and design of the Transport loop system please
refer to our website www.philipp-group.de.
VB3-T-046-en - 03/17

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

30 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Transport loop anchor

130

100
L
L

L
100
Type 16 and 24
Type 36
Type 30

Transport loop anchor

Ref.-No. Type Steel Dimension Lateral tension
galvanised bearing capacity L (γmax 12.5°)
[kN] [mm]
67TPSA16 TPS 16 20.0 95.0
67TPSA24 TPS 24 40.0 110.0 not
67TPSA30 TPS 30 52.0 120.0 permissible

71FL36 TPS 36 63.0 84.0

PHILIPP Transport loop system For further details of the application and design of the Transport loop system please
refer to our website www.philipp-group.de.
VB3-T-046-en - 03/17

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 31
 Power System SL
Transport anchor systems

With an optimizing of the standard Threaded anchor sys-

tem the closed SL system with its transport anchor, lift-
ing device and suitable accessories can provide further
possibilities. Significantly higher load bearing capacities
and less load classes than comparable standard thread-
ed transport anchors simplify the design and planning of
lifting operations. Both, the colour coding and the left-
hand thread on all system components prevent the risk
of confusion and guarantee a safe handling.

Recommended use

Walls Bar-shaped elements Shafts / manholes

Features and benefits compact

Highly loadable threaded transport anchors
No mix-up with standard Threaded transport anchors due to left-hand thread.
One lifting device for all load directions and applications
Simple, optical differentiation (grooves at the socket)
Threaded transport anchors are totally embedded in the concrete element
Clear colour code for identification in the entire system
Bearing capacities from 2.0 t up to 20 t
Applicable for all load directions (axial, diagonal, lateral)
Reinforcement optimized for effectiveness
Threaded socket electro galvanised

32 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Threaded transport anchor SL Lifty SL Marking ring SL Nailing plate SL

Colour code of the Power System SL

SL 16 SL 24 SL 30 SL 42 SL52

20.0 50.0 80.0 145.0 200.0

max. load bearing capacity (allow. F) [kN]

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 33
 Power System SL

Threaded transport anchor SL

All Threaded transport anchors SL are designed for the trans-

port of precast concrete elements, such as walls or bar-shaped
concrete units. Either with extremely thin or heavy prefabricated
elements – depending on the element type and its dimensions dif-
ferent sizes are available. Axial-, diagonal and lateral tension are Øds
no problem for the Threaded transport anchors SL. L

Threaded transport anchor SL - straight tail Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions Lateral tension (γmax 90°)
galvanised bearing capacity
L Øds
[mm] [mm] Axial tension (βmax 12.5°)
67M16SL SL 16 20.0 455 12 Diagonal tension (βmax 45°)
67M24SL SL 24 50.0 580 20
67M30SL SL 30 80.0 750 25
67M42SL SL 42 145.0 1100 32
67M52SL SL 52 200.0 1200 40

PHILIPP Power System SL For further details of the application and design of the Threaded transport anchor SL
please refer to our website www.philipp-group.de.
VB3-T-028-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

34 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Lifty SL

The Lifty SL is a specially designed lifting device for the Power

System SL. It consists of a forged ring bolt with a welded chain link
and is therefore ideally suited in its robust design for daily use in
the factory and on the construction site.
b

M-LH

Lifty SL
Ref.-No. Type Thread Bearing capacity Dimensions
b l
[M-LH] [kN] [mm] [mm]
62LISL16M SL 16 16 20.0 50 150
62LISL24M SL 24 24 50.0 50 162
62LISL30M SL 30 30 80.0 50 177
62LISL42M SL 42 42 145.0 65 220
62LISL52M SL 52 52 200.0 65 220

PHILIPP Power System SL For further details of the application and design of the Lifty SL please refer to our
website www.philipp-group.de.
VB3-T-028-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 35
 Power System SL

Marking ring SL with clip

With the Marking ring SL with clip on the one hand a clear identi-
fication of the anchor when installed is possible and on the other
hand to secure the position of the optional additional reinforce- ØD
ment (for diagonal or lateral tension). Ød
Due to the explicit colour coding a quick and correct assignment
to the corresponding lifting device is ensured.

B h

Marking ring SL with clip

Ref.-No. Type Dimensions
ØD Ød B h
[mm] [mm] [mm] [mm]
74KR16SLCLIP SL 16 31 17 49 10
74KR24SLCLIP SL 24 41 25 63 10
74KR30SLCLIP SL 30 52 31 15 10
74KR42SLCLIP SL 42 64 43 15 13
74KR52SLCLIP SL 52 80 53 15 13

PHILIPP Power System SL For further details of the application and design of the Marking ring SL with clip
please refer to our website www.philipp-group.de.
VB3-T-028-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

36 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Nailing plate SL, plastic

The Nailing plate SL (plastic) is used to fix the Threaded transport

anchor SL to the mould tightly. This can be done either by nailing
or hot gluing of the Nailing plate SL before the anchor is screwed ØD
on.

hT

H
Ød

Nailing plate SL, plastic

Ref.-No. Type Dimensions
ØD Ød H hT
[mm] [mm] [mm] [mm]
72KHN16SL SL 16 40 30 20 10
72KHN24SL SL 24 55 45 25 10
72KHN30SL SL 30 70 60 30 10
72KHN42SL SL 42 96 86 35 12
72KHN52SL SL 52 96 86 35 12

PHILIPP Power System SL For further details of the application and design of the Nailing plate SL please refer
to our website www.philipp-group.de.
VB3-T-028-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Threaded anchors www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 37
 Spherical head transport anchor
Transport anchor systems

for the lifting of e.g. wall-like elements

Spherical head transport anchors already define oppor-
tunity standard for a long time, as both their design resp.
geometry are simple and their handling easy (quick lift
anchors). With the corresponding lifting device the (un)
coupling can be done quickly and lifting operations in all
load directions are possible. They cover a wide range of
applications, especially in wall-like elements and bar-
shaped units, Spherical head transport anchors
can show their strengths.

Recommended use

Walls Bar-shaped elements Girders

Sandwich panels Shafts / manholes Tanks

Features and benefits compact

Spherical head transport anchors are totally embedded in the concrete
Simple installation due to rotation-symmetrical anchor design
Quick (un)coupling of the lifting device into the anchor
Lifting device suitable for all load directions (axial, diagonal and lateral)
Load bearing capacities up to 32 t
Robust, durable lifting device
Spherical head anchor with offset optimized for sandwich elements
Reinforcement optimized for effectiveness
Well graded type series and bearing capacities for economical use

38 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor Overview
Recommended use Transport anchor Types

Spherical head transport anchor KK 1.3 - KK 32.0

Walls Spherical head transport anchor - with offset KK 2.5 - KK 20.0
Spherical head rod anchor KK 1.3 - KK 15.0
Bar-shaped elements Spherical head transport anchor KK 1.3 - KK 32.0
(such as beams, purlins, walers and girders) Spherical head rod anchor KK 1.3 - KK 15.0
Spherical head transport anchor KK 1.3 - KK 32.0
Shafts / tanks
Spherical head rod anchor KK 1.3 - KK 15.0
Girder Spherical head transport anchor - double-head KK 20.0 - KK 32.0

Spherical head transport anchor Version: with offset Spherical head rod anchor Version: double-head

Spherical head lifting clutch Accessories

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 39
 Spherical head anchors for lifting of e.g. wall-like elements

Spherical head transport anchor

Spherical head transport anchors are very universally applicable

anchors for wall-like geometries, which are used in both light and
very heavy precast concrete parts. They convince with their sim-
plicity and robust components as well as an easy installation with
the appropriate accessories. Here, the applicable load directions
L
are axial and diagonal tension.

2.5PH
-
KK170

Spherical head transport anchor Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension
bright bearing capacity
L
Axial tension (βmax 12.5°)
[kN] [mm]
Diagonal tension (βmax 45°)
81-013-120 13.0 120
KK 1.3
81-013-240 13.0 240
81-025-170 25.0 170
KK 2.5
81-025-280 25.0 280
81-040-210 40.0 210
81-040-240 40.0 240
KK 4.0
81-040-340 40.0 340
81-040-420 40.0 420
81-050-240 50.0 240
81-050-340 KK 5.0 50.0 340
81-050-480 50.0 480
81-075-300 75.0 300
81-075-540 KK 7.5 75.0 540
81-075-680 75.0 680
81-100-340 100.0 340
KK 10.0
81-100-680 100.0 680
81-150-400 150.0 400
KK 15.0
81-150-840 150.0 840
81-200-500 200.0 500
KK 20.0
81-200-1000 200.0 1000
81-320-700 KK 32.0 320.0 700
- also available in electro-galvanised b.z.p. (e.g. 81-025-170VC)
or hot-dip galvanised h.d.g. (e.g. 81-025-170FV) version.
- stainless steel on request.

PHILIPP Spherical head anchor For further details of the application and design of the Spherical head anchor please
refer to our website www.philipp-group.de.
VB3-T-032-en - 01/16

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

40 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Spherical head anchor - with offset

A special bended Spherical head anchor (with offset) is well-prov-

en for the transport of precast concrete sandwich panels, in order
to keep the load application in the centre line of the element. Thus,
the panel is (nearly) lifted in a straight way and can be transported a
easily. Both axial and diagonal tension can be realized easily with
a Spherical head anchor to be offset.
L

2.5PH
-2
KK 80

Spherical head transport anchor - with offset Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions
bright bearing capacity
L a
[kN] [mm] [mm] Axial tension (βmax 12.5°)
81-025-268GK KK 2.5 25.0 268 50 Diagonal tension (βmax 45°)

81-050-466GK KK 5.0 50.0 466 60

81-075-664GK KK 7.5 75.0 664 70
81-100-664GK KK 10.0 100.0 664 70
81-150-825GK KK 15.0 150.0 825 80
81-200-986GK KK 20.0 200.0 986 80
- also available in electro-galvanised b.z.p. (e.g. 81-025-268GKVC)
or hot-dip galvanised h.d.g. (e.g. 81-025-268GKFV) version.
- stainless steel on request.

PHILIPP Spherical head anchor For further details of the application and design of the Spherical head anchor with
offset please refer to our website www.philipp-group.de.
VB3-T-034-en - 01/17

Version: with offset

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 41
 Spherical head anchors for lifting of e.g. wall-like elements

Spherical head rod anchor

Spherical-head rod anchors are universally applicable transport

anchors, which can be used in light to medium-weight, wall-like
precast concrete elements. Instead of a forged foot this anchor
has a ribbed surface, is easy to install with the corresponding ac-
cessories and convinces with its simplicity and robust load-bear- L
ing components. Possible lifting directions are here axial and di-
agonal tension.

2.5PH
-4
KK 00

Spherical head rod anchor Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension
bright bearing capacity
L
Axial tension (βmax 12.5°)
[kN] [mm]
Diagonal tension (βmax 45°)
81-013-270ST KK 1.3 13.0 270
81-025-400ST 25.0 400
KK 2.5
81-025-520ST 25.0 520
81-040-510ST KK 4.0 40.0 510
81-050-580ST 50.0 580
KK 5.0
81-050-900ST 50.0 900
81-075-750ST 75.0 750
KK 7.5
81-075-1150ST 75.0 1150
81-100-870ST 100.0 870
KK 10.0
81-100-1300ST 100.0 1300
81-150-1080ST 150.0 1080
KK 15.0
81-150-1550ST 150.0 1550
- also available in electro-galvanised b.z.p. (e.g. 81-025-400STVC)
or hot-dip galvanised h.d.g. (e.g. 81-025-400STFV) version.
- stainless steel on request.

PHILIPP Spherical head rod anchor For further details of the application and design of the Spherical head rod anchor
please refer to our website www.philipp-group.de.
VB3-T-035-en - 01/16

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

42 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Spherical head transport anchor - double-head

Especially for applications in heavy but thin concrete elements the

Spherical head double head anchor is designed. Compared to the
standard Spherical head, the dimensions from the anchor foot to
the anchor head have been adjusted or reduced so that a particu-
larly small element thickness can be achieved. L

32PH
-7
KK00

Spherical head transport anchor - double-head

Axial tension (γmax 10°)
Ref.-No. Type Steel Dimension
bright bearing capacity
L Diagonal tension (βmax 45°)
[kN] [mm] Axial tension (βmax 12.5°)
81-200-500D KK 20.0 200.0 500
81-320-700D KK 32.0 320.0 700
- a lso available in electro-galvanised b.z.p. (e.g. 81-025-400DVC)
or hot-dip galvanised h.d.g. (e.g. 81-025-400DFV) version.
- stainless steel on request.

PHILIPP Spherical head double-head anchor For further details of the application and design of the Spherical head double head
anchor please refer to our website www.philipp-group.de.
VB3-T-065-en - 01/18

www.philipp-group.de
Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 43
 Spherical head anchors for lifting of e.g. wall-like elements

Spherical head lifting clutch / recess formers

Exclusively for the Spherical head anchor system the Spherical daily use. In order to increase the safety of the clutch a check
head lifting clutch is designed and enables with its simple mecha- gauge for a fast and easy test of important wear measurements
nism an easy, safe and very fast (un)coupling of a precast element. is available.
Due to its robust design it is very durable and therefore ideal for

Spherical head lifting clutch

Ref.-No. Type Bearing Dimensions b1
capacity l h b1
[kN] [mm] [mm] [mm]
80-HKD-013 KK 1.3 13 158 70 46
80-HKD-025 KK 2.5 25 197 86 66 h
80-HKD-050 KK 5.0 50 240 88 72 l
80-HKD-100 KK 10.0 100 340 115 89
80-HKD-200 KK 20.0 200 453 150 130
80-HKD-320 KK 32.0 320 593 200 168

Suitable rubber recess formers in various sizes fix the Spherical for a simple and safe coupling of the lifting clutch.
head anchor securely in position and create the recess required

Rubber recess former

Ref.-No. Type Dimensions Colour
Da h Da
[mm] [mm]
83-AKO-013 KK 1.3 60 30 blue
83-AKO-025 KK 2.5 74 37 yellow
83-AKO-050 KK 5.0 94 47 blue
83-AKO-075 KK 7.5 118 59 red
h

83-AKO-100 KK 10.0 118 59 yellow

83-AKO-150 KK 15.0 160 80 grey
83-AKO-200 KK 20.0 160 80 grey
83-AKO-320 KK 32.0 214 107 black

Recess formers for the Spherical head anchor system are also available in steel and steel with magnets.

PHILIPP Spherical head lifting clutch For further details of the application and design of the Spherical head lifting clutch
please refer to our website www.philipp-group.de.
VB3-T-037-en - 08/18

www.philipp-group.de
Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

44 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Accessories

In order to fix a rubber recess former for the Spherical head an- for individually screwing in a fixing element. An easy release and
chor system to the formwork, we offer either an accessory with reuse of the recess former is thus guaranteed.
ready-made threaded rod and wing nut or with an internal thread

Stamped part with threaded rod

Ref.-No. Type Dimensions M
M L
[mm] [mm]
83-SGS-013 KK 1.3 8 80
83-SGS-025 KK 2.5 10 80
83-SGS-050 KK 4.0 / 5.0 10 80
83-SGS-075 KK 7.5 / 10.0 12 100

L
83-SGS-200 KK 15.0 / 20.0 12 100

Stamped part with internal thread

Ref.-No. Type Dimensions
M S
[mm] [mm]
83-SIG-013 KK 1.3 8 9.0 M
83-SIG-025 KK 2.5 10 11.0
83-SIG-050 KK 4.0 / 5.0 10 12.5

S
83-SIG-075 KK 7.5 / 10.0 12 15.0
83-SIG-200 KK 15.0 / 20.0 12 15.0

PHILIPP Accessories For further details of the application and design of the Accessories for the Spherical
head transport anchor system please refer to our website www.philipp-group.de.
VB3-T-038-en - 01/16

for the Spherical head transport anchor system

www.philipp-group.de
Data sheet

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 45
 Spherical head transport anchor
Transport anchor systems

Spherical head anchors in tubes, manholes, shafts and

slab-like elements
For more special applications as well as for standard pre-
cast elements Spherical head transport anchors can be
used. For example, shaft and manhole elements in dif-
ferent sizes, tube elements and slab-like elements are
no particular challenge for the smaller but very efficient
Spherical head anchors. With a lifting device to be
easy (un)coupled all lifting operations are prob-
lem-free and in all load directions possible.

Recommended use

Tubes Shafts / manholes Tanks

Floor and roofing slabs

Features and benefits compact

Spherical head transport anchors are totally embedded in the concrete element
Simple installation due to rotation-symmetrical anchor design
Robust, durable lifting device
Quick (un)coupling of the lifting device into the anchor
Lifting device suitable for all load directions (axial, diagonal and lateral)
Load bearing capacities up to 20 t
Reinforcement optimized for effectiveness
Well graded type series and bearing capacities for economical use

46 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor Overview
Recommended use Transport anchor Types
Spherical head transport anchor KK 5.0 - KK 20.0
Tubes / shafts / tanks
Spherical head transport anchor - double headed KK 1.3 - KK 2.5
Floor and roofing slabs Spherical head flat steel anchor KK 2.5 - KK 10.0

Spherical head transport anchor Spherical head flat steel anchor Version: double headed Spherical head lifting clutch

Accessories

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 47
 Spherical head anchors in tubes, manholes, shafts and slab-like elements

Spherical head transport anchor

These Spherical head anchors with their short lengths are spe-
cially optimised for the lifting of tubes and shafts. They convince
with their simplicity and robust components as well as an easy
installation with the appropriate accessories. All load directions
can be realised with the ‘short’ Spherical head anchors without L
any problems.

5.0PH
Spherical head transport anchors for tubes, shafts and manholes -
KK120
Ref.-No. Type Steel Dimension
bright bearing capacity
L
[kN] [mm]
81-050-075 50.0 75 Axial tension (γmax 15°)
81-050-085 50.0 85 Lateral tension (γmax 90°)
81-050-095 KK 5.0 50.0 95
81-050-110 50.0 110 Axial tension (βmax 12.5°)
81-050-120 50.0 120 Diagonal tension (βmax 45°)
81-075-085 75.0 85 Lateral tension (βmax 90°)
81-075-095 75.0 95
81-075-100 75.0 100
KK 7.5
81-075-120 75.0 120
81-075-140 75.0 140
81-075-165 75.0 165
81-100-115 100.0 115
81-100-120 100.0 120
81-100-135 100.0 135
81-100-150 KK 10.0 100.0 150
81-100-170 100.0 170
81-100-200 100.0 200
81-100-250 100.0 250
81-150-140 150.0 140
81-150-165 150.0 165
KK 15.0
81-150-200 150.0 200
81-150-300 150.0 300
81-200-165 200.0 165
81-200-200 200.0 200
KK 20.0
81-200-250 200.0 250
81-200-340 200.0 340
- also available in electro-galvanised b.z.p. (e.g. 81-100-150VC)
or hot-dip galvanised h.d.g. (e.g. 81-100-150FV) version.
- stainless steel on request.

PHILIPP Spherical head anchor For further details of the application and design of the Spherical head anchor please
refer to our website www.philipp-group.de.
VB3-T-033-en - 01/16

for tubes and shafts

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system www.philipp-group.de

48 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Spherical head flat steel anchor

The transport of plane precast concrete elements, e.g. slabs or roof

elements, is the ideal field of application for Spherical head flat a
steel anchors. With a significantly larger anchor plate compared to
an anchor foot, the embedment depth can be decisively reduced
while still providing high load capacity.
L

a
2.5PH
-
KK85

Spherical head flat steel anchor

Ref.-No. Type Steel Dimension
bright bearing capacity
Axial tension (βmax 12.5°)
L a
Diagonal tension (βmax 45°)
[kN] [mm] [mm]
81-025-055FL 25.0 55 70
KK 2.5
81-025-120FL 25.0 120 70
81-050-055FL 50.0 55 90
81-050-065FL KK 5.0 50.0 65 90
81-050-110FL 50.0 110 90
81-100-115FL KK 10.0 100.0 115 90
- also available in electro-galvanised b.z.p. (e.g. 81-025-120FLVC)
or hot-dip galvanised h.d.g. (e.g. 81-025-120FLFV) version.

PHILIPP Spherical head flat steel anchor For further details of the application and design of the Spherical head flat steel
anchor please refer to our website www.philipp-group.de.
VB3-T-047-en - 08/18 - PDF

Data sheet
www.philipp-group.de
/ Download-Center / Transport and Mounting Systems / Technical documents

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 49
 Spherical head anchors in tubes, manholes, shafts and slab-like elements

Spherical head transport anchor - double headed

Spherical head anchors double headed are mainly used in light,

thin-walled tubes as well as reinforced concrete manholes and
shafts. Available in two load classes and with standard spherical
head, the anchor is particularly suitable for formworks with au-
tomatic anchor feed. Specially designed recess formers make it L
easier to fix the anchor to the formwork and also to couple it later
using the lifting clutch.
2.5PH
-
KK120

Spherical head transport anchor - double headed Axial tension (γmax 15°)

Lateral tension (γmax 90°)
Ref.-No. Type Steel Dimension
bearing capacity Axial tension (βmax 12.5°)
L Diagonal tension (βmax 45°)
[kN] [mm] Lateral tension (βmax 90°)
81-013-065MA 13.0 55
KK 1.3
81-013-085MA 13.0 85
81-025-065MA 25.0 65
81-025-085MA KK 2.5 25.0 85
81-025-120MA 25.0 120
- also available in electro-galvanised b.z.p. (e.g. 81-025-085MAVC)
version.

Further information about the corresponding lifting device and fixing accessories can be found on pages 44 and 45.

PHILIPP Spherical head double-headed anchor For further details of the application and design of the Spherical head double head-
ed anchor please refer to our website www.philipp-group.de.
VB3-T-036-en - 01/16

Data sheet

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system www.philipp-group.de

50 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Spherical head system

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 51
 Hole anchor system
Transport anchor systems

The Hole anchor system belongs also to the well-estab-

lished Transport anchor systems and basically consists
of anchors made of flat steel and the lifting device, the
Ring clutch. Possible applications are usually reflected in
various shapes of the anchor or anchor foot. However, the
anchor head always has a hole in which the ring clutch
fits perfectly. Anchors and Ring clutches allow lifting op-
erations in all load directions.

Recommended use

Walls Bar-shaped elements Tanks

Sandwich panels Girders

Floor and roofing slabs Shafts / manholes

Features and benefits compact

Hole anchors are totally embedded in the concrete element
Simple installation
Quick (un)coupling of the lifting device into the anchor
Lifting device suitable for all load directions (axial, diagonal and lateral)
Load bearing capacities up to 26 t
Robust, durable lifting device
Reinforcement optimized for effectiveness
Well graded type series and bearing capacities for economical use

52 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor Overview
Recommended use Transport anchor Types

Spread anchor LA 0.7 - LA 22.0

Walls / shafts / tanks Two-hole anchor LA 1.4 - LA 26.0
Erection anchor - one-sided / double-sided LA 1.4 - LA 22.0
Sandwich panels Sandwich panel anchor LA 2.5 - LA 17.0
Bar-shaped elements Spread anchor LA 0.7 - LA 22.0
Spread anchor LA 0.7 - LA 22.0
Floor and roofing slabs Plate anchor LA 1.4 - LA 10.0
Flat feed anchor LA 0.7 - LA 22.0
Spread anchor LA 0.7 - LA 22.0
Girders
Two-hole anchor LA 1.4 - LA 26.0

Spread anchor Two-hole anchor Erection anchor Plate anchor

one-sided

double-sided

Flat feed anchor Sandwich panel anchor Ring clutch Recess former

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 53
 Hole anchor system

Spread anchor

With its special spreading at the anchor foot, this transport anchor
is very multifunctional. It offers an optimum anchoring for thin-
walled elements as well as large-format concrete elements. Beams,
columns, walls and π-slabs are typical applications for that anchor
type. For special requirements, the Spread anchor can be used also
as a Two-hole anchor. For this purpose, the anchor has an addi-
tional slotted hole.
PH
2.5 L
15
Spread anchor SA

Ref.-No. Type Steel

Dimension
black steel bearing capacity
L
[kN]
[mm]
48SA007110 LA 0.7 1107.0
48SA014110 110
LA 1.4 14.0 Axial tension (γmax 15°)
48SA014160 160
48SA020130 130 Lateral tension (γmax 90°)
48SA020160 LA 2.0 20.0 160
48SA020210 210
48SA025150 150 Axial tension (βmax 30°)
48SA025200 LA 2.5 25.0 200
Diagonal tension (βmax 60°)
48SA025250 250
48SA030160 160
48SA030200 LA 3.0 30.0 200
48SA030280 280
48SA040180 180
48SA040240 LA 4.0 40.0 240
48SA040320 320
48SA050180 180
48SA050240 LA 5.0 50.0 240
48SA050400 400
48SA075260 260
48SA075300 LA 7.5 75.0 300
48SA075420 420
48SA100300 300
48SA100370 LA 10.0 100.0 370
48SA100520 520
48SA140370 370
LA 14.0 140.0
48SA140460 460
48SA220500 500
LA 22.0 220.0
48SA220620 620
- also available in electro-galvanised b.z.p. (e.g. 48SA025200VC)
or hot-dip galvanised h.d.g. (e.g. 48SA025200FV) version.

PHILIPP Hole anchor system For further details of the application and design of the Spread anchor please refer to
our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

54 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Two-hole anchor

For more light elements such as (small) walls and bar-shaped ele-
ments, the Two-hole anchor is a simple and often used transport
anchor system. The applied force into the precast concrete ele-
ment is done via the reinforcement to be planned separately and
inserted through the slotted hole. On request, Two-hole anchors
with additional holes resp. in longer dimensions can be supplied.
PH
2.5
9
ZA
L

Two-hole anchor Axial tension (γmax 15°)

Ref.-No. Type
Steel Dimension
black steel bearing capacity L
[kN] [mm]
48ZA014090 LA 1.4 14.0 90 Axial tension (βmax 30°)

2.5 PH

SA 15
48ZA020090 LA 2.0 20.0 90 Diagonal tension (βmax 60°)
48ZA025090 LA 2.5 25.0 90
48ZA030120 LA 3.0 30.0 120
48ZA040120 LA 4.0 40.0 120
2.5 PH

48ZA050120 LA 5.0 50.0 120 SA 15

48ZA075160 LA 7.5 75.0 160

48ZA100165 LA 10.0 10.0 165
48ZA140240 LA 14.0 14.0 240
48ZA220300 LA 22.0 22.0 300
48ZA260300 LA 26.0 26.0 300
- also available in electro-galvanised b.z.p. (e.g. 48ZA025090VC)
or hot-dip galvanised h.d.g. (e.g. 48ZA025090FV) version.

PHILIPP Hole anchor system For further details of the application and design of the Two-hole anchor please refer
to our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 55
 Hole anchor system

Erection anchor, double-sided

Erection anchors double-sided are designed in particular for thin-

walled concrete elements which are to be erected at right angles
to the horizontal production level. Due to its special head design,
the lifting device does not rest on the concrete but on the anchor
under lateral tension, so the erection forces are transferred into
the anchor and a spalling of concrete is prevented. Special notch-
es on the Erection anchor are provided for a precise positioning of
L
the installation reinforcement. 2.5
PH
23
AB

Erection anchor double sided Axial tension (γmax 15°)

Ref.-No. Type Steel Dimension
Lateral tension (γmax 90°)
black steel bearing capacity L
Diagonal tension (βmax 60°)
[kN] [mm] Axial tension (βmax 30°)

2.5 PH

SA 15
48AB014200 LA 1.4 14.0 200
48AB025230 LA 2.5 25.0 230
48AB040270 LA 4.0 40.0 270
48AB050290 LA 5.0 50.0 290
2.5 PH

SA 15

48AB075320 LA 7.5 75.0 320

48AB100390 LA 10.0 100.0 390
48AB125500 LA 12.5 125.0 500
48AB170500 LA 17.0 170.0 500
48AB220500 LA 22.0 220.0 500
- also available in electro-galvanised b.z.p. (e.g. 48AB025230VC)
or hot-dip galvanised h.d.g. (e.g. 48AB025230FV) version.

PHILIPP Hole anchor system For further details of the application and design of the Erection anchor double-sided
please refer to our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

56 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Erection anchor - one-sided

This Erection anchor is - also - designed for thin-walled elements

which are to be lifted at right angles to the horizontal production
level, but the anchor can be loaded in one direction only. Because
of its special head design the lifting device does not rest on the
concrete but on the anchor, so the erection force is transferred
into the anchor and a spalling of concrete is prevented. Special
notches on the Erection anchor are provided for a precise posi-
L
tioning of the installation reinforcement. 2.5
PH
23
AE

Erection anchor, one-sided Lateral tension (γmax 90°)

Ref.-No. Type Steel Dimension Axial tension (γmax 15°)
black steel bearing capacity L
Diagonal tension (βmax 60°)
[kN] [mm] Axial tension (βmax 30°)
48AE014200 LA 1.4 14.0 200
48AE025230 LA 2.5 25.0 230
48AE040270 LA 4.0 40.0 270
48AE050290 LA 5.0 50.0 290
2.5 PH

SA 15

48AE075320 LA 7.5 75.0 320

48AE100390 LA 10.0 100.0 390
48AE125500 LA 12.5 125.0 500
48AE170500 LA 17.0 170.0 500
48AE220500 LA 22.0 220.0 500
- a lso available in electro-galvanised b.z.p. (e.g. 48AE025230VC)
or hot-dip galvanised h.d.g. (e.g. 48AE025230FV) version.

PHILIPP Hole anchor system For further details of the application and design of the Erection anchor one-sided
please refer to our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 57
 Hole anchor system

Plate anchor

Because of its low embedment depth, the Plate anchor is special-

ised in the transport of very thin, slab-like elements. Nevertheless,
the Plate anchor is highly effective and offers load bearing capac-
ities up to 10 t per anchor. The anchor plate must be reinforced

PA 8
crosswise with additional rebars as standard.

2.5 PH
L

e
e

Plate anchor
Ref.-No. Type Steel Dimensions
Axial tension
black steel bearing capacity (βmax 30°)
L e Diagonal tension
[kN] [mm] [mm] (βmax 60°)
48PA0140055 LA 1.4 14.0 55 80
48PA0250080 LA 2.5 25.0 80 80
48PA0500120 LA 5.0 50.0 120 100
48PA1000160 LA 10.0 100.0 160 140
- also available in electro-galvanised b.z.p. (e.g. 48PA0250080VC)
or hot-dip galvanised h.d.g. (e.g. 48PA0250080GV) version.

PHILIPP Hole anchor system For further details of the application and design of the Plate anchor please refer to
our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

58 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Flat foot anchor

Also for the transport of thin, slab-like elements, the Flat foot an-
chor can be used as an alternative to the Plate anchor. Especially
with higher concrete strengths, the maximum load-bearing capac-
ity of this anchor type is achieved at the time of lifting. The anchor

FF 7

2.5 PH
foot shall be reinforced crosswise with additional rebars.

Flat foot anchor

Ref.-No. Type Steel Dimensions
Axial tension
black steel bearing capacity (βmax 30°)
L e Diagonal tension
[kN] [mm] [mm] (βmax 60°)
48FF007065 LA 0.7 7.0 65 70
48FF014065 LA 1.4 14.0 65 70
48FF020070 LA 2.0 20.0 70 80
48FF025075 LA 2.5 25.0 75 94
48FF030090 LA 3.0 30.0 90 100
48FF040110 LA 4.0 40.0 110 100
48FF050125 LA 5.0 50.0 125 105
48FF075170 LA 7.5 75.0 170 120
48FF100200 LA 10.0 100.0 200 120
48FF125220 LA 12.5 125.0 220 200
48FF170270 LA 17.0 170.0 270 200
48FF220310 LA 22.0 220.0 310 200
- also available in electro-galvanised b.z.p. (e.g. 48FF025075VC)
or hot-dip galvanised h.d.g. (e.g. 48FF025075FV) version.

PHILIPP Hole anchor system For further details of the application and design of the Flat foot anchor please refer
to our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 59
 Hole anchor system

Sandwich panel transport anchor

The lifting and transport of multilayer precast reinforced concrete

panels, so called sandwich elements, is the only application of the
Sandwich panel anchor. This anchor enables a lifting in the centre
line of the concrete element and thus a (nearly) vertical hanging
during lifting operations.

L
PH
2.5

25
SW

Sandwich panel transport anchor Axial tension (γ)

Ref.-No. Type Steel Dimension Lateral tension (γmax 90°)
black steel bearing capacity L
[kN] [mm]
Axial tension (β)
48SW025250 LA 2.5 25.0 250
48SW050300 LA 5.0 50.0 300
48SW075350 LA 7.5 75.0 350
48SW100350 LA 10.0 100.0 350
48SW170400 LA 17.0 170.0 400
2.5 PH

- also available in electro-galvanised b.z.p. (e.g. 48SW025250VC)

SA 15

or hot-dip galvanised h.d.g. (e.g. 48SW025250GV) version.

PHILIPP Hole anchor system For further details of the application and design of the Sandwich panel anchor
please refer to our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

60 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Ring clutch / recess former

The corresponding lifting device for the Hole anchor system is the load classes. There is no danger of mix-up, because only the cor-
Ring clutch. It consists of a hinged handle and a coupling head, rect Ring clutch fits to the corresponding transport anchor sizes.
which fits only in the boring of the Hole transport anchors. The
Ring clutch is available in four sizes, each suitable for 3 - 4 anchor

Ring clutch
b
Ref.-No. Type Bearing Dimensions
capacity
L a b
[kN] [mm] [mm] [mm] a
48RK025265 LA 2.5 25.0 265 70 58
48RK050330 LA 5.0 50.0 330 86 65 L
48RK100425 LA 10.0 100.0 425 112 90
48RK260605 LA 26.0 260.0 605 160 120

Matching recess formers (rubber, steel or magnetic versions) in the required recess for a simple and safe coupling of the clutch.
various sizes fix the Hole anchors securely in position and create

Plastic recess former PLA-AK-A1

Ref.-No. Type Dimensions
a b c
[mm] [mm] [mm] a
48AKA01025 LA 2.5 43 104 45
48AKA01050 LA 5.0 49 126 59
48AKA01100 LA 10.0 67 188 85
48AKA01260 LA 26.0 112 234 118
b
c

PHILIPP Hole anchor system For further details of the application and design of the Ring clutch please refer to
our website www.philipp-group.de.

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Hole anchor systems www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 61
 Cast-in lifting hoops
Transport anchor systems

Cast-in lifting hoops are the combination of simple but

powerful transport anchors on the one hand and ex-
tremely cost-effective solutions for high load-bearing
capacities on the other. Furthermore, the very good cost/
performance ratio is improved by the fact, that no spe-
cial lifting device is required for the system. The range
of application includes very light to very heavy precast
elements up to almost 100 t per anchor. Both, the sim-
plicity of the Cast-in lifting hoops and their appli-
cation as well as their enormous effectiveness
provide the ideal solution for a wide range of
requirements.

Recommended use

Walls Floor and roofing slabs Girders

Bar-shaped elements

Features and benefits compact

Installation without additional recess former
No special lifting device required
Very high load-bearing capacities depending on the element dimensions
Special accessories available to guarantee the required radii in order to protect the wire rope and get full load-bearing capacity
(Wire protection pulley)
Only for axial and diagonal tension
Cost-effective transport anchor system

62 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Anchor Overview
Recommended use Lifting hoops Types

Cast-in lifting hoop AS 0.8 - AS 25.0

Walls
Polypropylene lifting loop AS 0.15 - AS 1.20
Floor and roofing slabs Angled loop AS 2.5 - AS 5.2
Bar-shaped elements Cast-in lifting hoop AS 0.8 - AS 25.0
Girders Cast-in lifting hoop AS 16.0 - AS 25.0

Cast-in lifting hoop Wire protection pulley Angled loop Polypropylene lifting loop

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 63
 Cast-in lifting hoops

Cast-in lifting hoop type AS 0.8 - AS 25.0

Cast-in lifting hoops convince by their simplicity and use in vari-

ous concrete elements, such as wall-like elements, columns, bar-

2016
shaped elements, beams and girders. Used wire-rope is bonded

2500kg
and forms a loop which encloses a concrete core – thus it enables
high load-bearing capacities for this transport anchor type. A spe-
cial lifting device is not required for transport and mounting of the
elements. Moreover, Cast-in lifting hoops also offer high perfor-
mance at a low price and thus combine many advantages. H

Cast-in lifting hoop type AS 0.8 - AS 25.0 Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions
galvanised bearing capacity
H B
[kN] [mm] [mm] Axial tension (βmax 12.5°)
442008 AS 0.8 8.0 235 95 Diagonal tension (βmax 30°)

442012 AS 1.2 12.0 235 95

442016 AS 1.6 16.0 235 100
442020 AS 2.0 20.0 270 115
442025 AS 2.5 25.0 310 135
442040 AS 4.0 40.0 340 150
442052 AS 5.2 52.0 365 165
442063 AS 6.3 63.0 380 180
442080 AS 8.0 80.0 440 205
442100 AS 10.0 100.0 515 245
442125 AS 12.5 125.0 570 270 The Wire protection pulley completes the system of the
442160 AS 16.0 160.0 605 286 Cast-in lifting hoops and is used as wire rope protection
442200 AS 20.0 200.0 730 345 with the correct transition radius when lifting the ele-
442250 AS 25.0 250.0 780 375 ments (page 66).

PHILIPP Cast-in lifting hoop For further details of the application and design of the Cast-in lifting hoop please
refer to our website www.philipp-group.de.
VB3-T-040-en - 05/18

Type AS 0.8 - AS 25.0

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops www.philipp-group.de

64 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Cast-in lifting hoop type AS 28.0 - AS 95.0

If very heavy or massive concrete elements (hall girders and

beams, columns, bridge elements etc.) have to be lifted, transport-

2016
ed and mounted, the use of Cast-in lifting hoops for the heavy load

2500kg
range up to 95 t capacity is obvious. Used wire-rope is bonded
and forms a loop which encloses a concrete core – thus it enables
very high load-bearing capacities for this transport anchor type.
Although this heavy-duty anchor is always combined with an indi-
vidual design service from PHILIPP, the Cast-in lifting hoop in this H
application area is nevertheless convincing with an unbeatable
B
price / performance ratio.

Cast-in lifting hoop type AS 28.0 - AS 95.0 Axial tension (γmax 15°)

Ref.-No. Type Steel Dimensions
galvanised bearing capacity
H B
[kN] [mm] [mm] Axial tension (βmax 12.5°)
Diagonal tension (βmax 30°)
442280 AS 28.0 280.0 800 375
442320 AS 32.0 320.0 880 426
442370 AS 37.0 370.0 950 440
442420 AS 42.0 420.0 1000 480
442470 AS 47.0 470.0 1100 520
442520 AS 52.0 520.0 1200 550
442570 AS 57.0 570.0 1350 645
442650 AS 65.0 650.0 1430 690 The Wire protection pulley completes the system of the
442750 AS 75.0 750.0 1530 725 Cast-in lifting hoops and is used as wire rope protection
442850 AS 85.0 850.0 1680 850 with the correct transition radius when lifting the ele-
442950 AS 95.0 950.0 1800 900 ments (page 66).

PHILIPP Drahtseilabhebeschlaufe For further details of the application and design of the Cast-in lifting hoop please
refer to our website www.philipp-group.de.
VB3-T-041-de - 04/19 - PDF

Typ AS 28.0 - AS 95.0

Einbau- und Verwendungsanleitung

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 65
 Cast-in lifting hoops

Wire protection pulley

The Wire protection pulley is an accessory for the Cast-in lifting

hoop and is used to protect the wire resp. to ensure the capacity b
of the anchor during lifting. It is available as a steel or high quality
plastic (POM) version and avoids a strong deformation of the wire
rope caused by too small radii at the loading point.

ØD
Wire protection pulley (steel version)
Ref.-No. Type Dimensions for
Cast-in lifting hoop
ØD b
[mm] [mm] Type
44SR008020 2.0 43 18 AS 0.8 - AS 2.0
44SR025063 6.3 75 32 AS 2.5 - AS 6.3
44SR080160 16.0 112 56 AS 8.0 - AS 16.0
44SR200250 25.0 148 68 AS 20.0 - AS 25.0
44SR280520 52.0 202 95 AS 28.0 - AS 52.0
44SR570990 99.0 256 140 AS 57.0 - AS 95.0
Also available in POM material and as a set (picture) Set (Wire protection pulley, shackle, master link)

PHILIPP Wire protection pulley

The Wire protection pulley is an accessory for the PHILIPP

Cast-in lifting hoop and is used to protect the wire respec- b
tively to ensure the capacity of the Cast-in lifting hoop. It is ØdS.max
available as a steel or plastic (POM) version.
When the Wire protection pulley is used a strong deforma-
tion of the wire rope caused by too small radii at the loading
point is avoided.
ØDR
ØdN
ØD

The Wire protection pulley is also available as a complete

set for the different load classes. The system consists of a
Wire protection pulley, a high strength shackle with eye bolt
and a master link (see table 2).

Picture 1

Table 1: Dimensions
Ref.-No. Type ØD ØDR ØdS.max ØdN b Weight for
(ØDR ≥ 3,5 × ØdS) Cast-in lifting hoop
[mm] [mm] [mm] [mm] [mm] [kg/pc.] [Type]

For further details of the application and design of the Wire protection pulley please
Version: steel
44SR008020 2.0 43 31.5 9.0 17.0 18.0 0.12 AS 0.8 - AS 2.0
44SR025063 6.3 75 56.0 16.0 28.0 32.0 0.75 AS 2.5 - AS 6.3
44SR080160 16.0 112 84.0 24.0 44.0 56.0 2.90 AS 8.0 - AS 16.0
PHILIPP Wire protection pulley 44SR200250 25.0 148 112.0 32.0 53.0 68.0 6.25 AS 20.0 - AS 25.0
44SR280520 52.0 202 154.0 44.0 73.0 95.0 16.40 AS 28.0 - AS 52.0
44SR570990 99.0 256 196.0 56.0 98.0 140.0 29.00 AS 57.0 - AS 95.0

refer to our website www.philipp-group.de.

Version: plastic (POM)
44SR008020POM 2.0 43 31.5 9.0 17.0 18.0 0.02 AS 0.8 - AS 2.0
44SR025063POM 6.3 75 56.0 16.0 28.0 32.0 0.13 AS 2.5 - AS 6.3
44SR080160POM 16.0 112 84.0 24.0 44.0 56.0 0.52 AS 8.0 - AS 16.0
44SR200250POM 25.0 148 112.0 32.0 53.0 68.0 1.12 AS 20.0 - AS 25.0
44SR280520POM 52.0 202 154.0 44.0 73.0 95.0 2.95 AS 28.0 - AS 52.0
44SR570990POM 99.0 256 196.0 56.0 98.0 140.0 5.23 AS 57.0 - AS 95.0

Table 2: Wire protection pulley in a set / set components

Ref.-No.   
Steel Plastic Wire protection pulley Shackle Master link
(POM) (acc. to DIN EN 13889) (acc. to DIN EN 1677-4)
VB3-T-063-en - 07/19 - PDF

[Type] [Nominal size] [Nominal size]

44SR008020K 44SR008020POMK 2.0 2.0 A13
44SR025063K 44SR025063POMK 6.3 6.5 A22
44SR080160K 44SR080160POMK 16.0 17.0 A36
44SR200250K 44SR200250POMK 25.0 25.0 A45
44SR280520K 44SR280520POMK 52.0 55.0 A56
44SR570990K 44SR570990POMK 99.0 120.0 A90

for Cast-in lifting hoops

www.philipp-group.de
Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops
© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • July 2019 2

66 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Polypropylene lifting loop

The loop made of Polypropylene (PP) is the cheap and simple

solution for lifting of small slab-like or wall-like precast concrete
elements. Due to the additional anchorage reinforcement to be
planned, a load capacity up to 1.2 t per anchor is possible. A special
lifting device is not required for transport and mounting of the
elements.

H
B

Polypropylene lifting loop Axial tension (γmax 15°)

Ref.-No. Type Rope Dimensions Diagonal tension (βmax 30°)
bearing capacity
H B
[kN] [mm] [mm] Axial tension (βmax 12.5°)
43P06 AS 0.150 1.50 220 100 Diagonal tension (βmax 30°)
43P08 AS 0.250 2.50 220 100
43P10 AS 0.360 3.60 260 120
43P12 AS 0.500 5.00 290 140
43P14 AS 0.875 8.75 330 160
43P16 AS 1.200 12.00 370 180

PHILIPP Polypropylene lifting loop For further details of the application and design of the Polypropylene loop please
refer to our website www.philipp-group.de.
VB3-T-042-en - 08/18

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 67
 Cast-in lifting hoops

Angled loop

The application of the Angled loop is focused on light, slab-like

precast concrete elements, hollow core floors etc. This anchor
type, which is easy to install and to fix to the reinforcement, can
be used without a special lifting device. The unbeatable price/
performance ratio of the Angled loop makes it very attractive for
precasters.

h
L

Angled loop
Ref.-No. Type Steel Dimensions
bearing capacity Axial tension (βmax 12.5°)
h L
Diagonal tension (βmax 30°)
[kN] [mm] [mm]
44W10180350 AS 2.5 25.0 180 350
44W12230380 AS 4.0 40.0 230 380
44W14230380 AS 5.2 52.0 230 380

PHILIPP Angled loop For further details of the application and design of the Angled loop please refer to
our website www.philipp-group.de.
VB3-T-043-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops www.philipp-group.de

68 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Lifting hoops

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 69
 Further systems
Transport anchor systems

Besides the standard range of transport anchors in nor-

mal weight concrete, there are further, special systems
for use in other building materials, such as masonry or
lightweight concrete. This portfolio shown here offers
special versions of the anchor head as well as the anchor
foot. With the various anchor head types, the user has
the freedom to use his preferred lifting device.

Recommended use

Walls (masonry) Walls

Features and benefits compact

 hree versions available:
T
- with integrated lifting loop
- with threaded socket (Threaded anchor system)
- with Spherical head (Spherical head anchor system)
Load-bearing capacities up to 4 t

70 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Masonry anchor Lightweight concrete anchor

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 71
 Further systems

Masonry anchor

Masonry anchors are designed for the transport of prefabricated masonry panels. They
are inserted through the corings of the bricks and finally grouted with mortar. Due to the Type 1
long anchor with a waved end the safe load transfer into the unit is guaranteed. With three
different anchor head versions nearly every lifting device can be used for transport and
mounting of masonry walls.
1200
69/2 kg
01
RD16 2

Masonry anchor with wire rope loop (type 1)

Ref.-No. Steel Dimensions Colour code
bearing capacity Øds L Øds
[kN] [mm] [mm] Type 2
73MW08___ 9.0 8 as required Sulfur yellow RD
73MW10___ 14.0 10 as required Jet black
73MW12___ 20.0 12 as required Clay brown
73MW14___ 31.0 14 as required Pastel orange
73MW16___ 40.0 16 as required Emerald green

L
Øds

Masonry anchor with threaded insert (type 2)

Ref.-No. Steel Dimensions Thread Type 3
bearing capacity Øds L RD ØD
[kN] [mm] [mm]
73HM12___ 5.0 8 as required 12

C K
P 100
- K
H 0
73HM14___ 8.0 10 as required 14
73HM16___ 12.0 12 as required 16

L
Øds
73HM18___ 16.0 14 as required 18
73HM20___ 20.0 16 as required 20
73HM24___ 25.0 16 as required 24
73HM30___ 40.0 20 as required 30

Masonry anchor with Spherical head (type 3)

Ref.-No. Steel Dimensions L
bearing capacity Øds L ØD
[kN] [mm] [mm] [mm]
73KK14___ 25.0 14 as required 25
73KK20___ 40.0 20 as required 36

PHILIPP Masonry anchor For further details of the application and design of the Masonry anchors please refer
to our website www.philipp-group.de.
VB3-T-044-en - 01/16

Data sheet

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Further systems www.philipp-group.de

72 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Lightweight concrete anchor

Anchors for lightweight concrete are designed for wall-like elements made of concrete
with open structure resp. lightweight concrete with low concrete strengths. A U-profile Type 1
welded to the anchor foot guarantees the safe transfer of force into the lightweight con-
crete. With three different designs of the anchor head, the requirements for a specific
lifting device for the transport and mounting process can be met.
1200
69/2 kg
01
RD16 2

Lightweight concrete anchor with wire rope loop (type 1)

Ref.-No. Steel Dimensions
bearing capacity Øds L a b
Øds Type 2
[kN] [mm] [mm] [mm] [mm]
73MW10____LB 14.0 10 as required 115 60 RD
73MW12____LB 20.0 12 as required 115 60
73MW14____LB 31.0 14 as required 175 60
73MW16____LB 40.0 16 as required 230 60

Lightweight concrete anchor with threaded insert (type 2) Øds

L
Ref.-No. Steel Dimensions Thread
Type 3
bearing capacity Øds L a b RD
[kN] [mm] [mm] [mm] [mm] ØD
73HM16____LB 12.0 10 as required 115 60 16

C K
P 100
- K
H 0
73HM20____LB 20.0 12 as required 115 60 20
73HM24____LB 25.0 14 as required 175 60 24
73HM30____LB 40.0 16 as required 230 60 30 Øds

L
Lightweight concrete anchor with spherical head (type 3) b
Ref.-No. Steel Dimensions
bearing capacity Øds L a b ØD
a
[kN] [mm] [mm] [mm] [mm] [mm]
73KK10____LB 13.0 10 as required 115 60 18
73KK12____LB 25.0 12 as required 115 60 25
73KK14____LB 32.0 14 as required 175 60 25
L
b
73KK16____LB 40.0 16 as required 230 60 36

PHILIPP Lightweight concrete anchor For further details of the application and design of the Lightweight concrete anchor
please refer to our website www.philipp-group.de.
VB3-T-045-en - 01/16

Data sheet

/ Products / Transport and Mounting Systems / Transport Anchor Systems / Further systems www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 73
 Creating connections - safely
In modern skeleton construction, a wide variety of connection solutions are required and applied. Solutions
listed here are focused on vertical connections for walls to each other and walls to columns.
Most of these connections can be realised with mounting parts such as boxes or rails, which generate a form
and force fit connection in the joints. Wire rope loops with a high flexibility are used as reinforcement, which
allow connections that are hardly possible with other connecting elements. Finally, the joints are filled with a
high-strength mortar.
A differentiation is made here between systems via which static loads are to be transferred or simple, con-
structive connections are sufficient. If civil engineers require specific designed connections, connecting sys-
tems with German approvals from DIBt and systems with calculation basis Eurocode 2 are available. Everything
else can be easily and quickly connected by constructive loops or rails.
All told, wire rope loops simplify the installation of precast concrete elements by their flexibility significantly.
Connection technology

74 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Connection technology
German approved systems for high forces Page 76
Constructive rails and loops Page 82
Restraint dowel plate / dowelling system Page 86

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 75
 German approved systems for high forces
German approved systems for high loads are required if
there are high (shear)-forces to be transferred into the
Connection technology

concrete element, e.g. for stiffening within a precast con-

crete building. Depending on the requirements and ap-
plication area, several solutions are available and can be
chosen by customer’s need.

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Possible applications

Wall / wall Wall / column Wall /wall (corner connection)

Wall / wall (T-connection, 2 walls) Wall / wall (T-connection, 3 walls)

Design tool
For the design of the German approved
systems for high forces an easy-to-use
and user-friendly software is available
on our website to provide individual de-
signs on the basis of simple geometric
data.

www.philipp-group.de

76 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Power One System Power Duo System PowerOS

Power Duo System

Power Box System Mortar (P&T / BETEC®)

EuroGrout® BETEC® EuroGrout®
THIXO mortar / grouting mortar THIXO mortar / grouting mortar THIXO mortar / grouting mortar
(Universalfüller / Varix)

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 77
 German approved systems

Power One System

The Power One system is a connecting device for the force- and
form-fit connection of primarily thin precast concrete elements
starting with 10 cm thickness. It is able to safely transfer forces in
all three directions, parallel and right-angled to the joint as well
as tensile forces in rope direction. High design values as also the
consideration of fire exposure characterise this connection solu-
tion.

Power One rail

Ref.-no. Dimensions
B1 B2 H L L1 SL
[mm] [mm] [mm] [mm] [mm] [mm]
84PONE400905 60 50 40 1250 190 90

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2093 B1
Institut für
Werkstoffe im Bauwesen
Technische Universität
B2
Darmstadt

SL

L1

PHILIPP Power One System For further details of the application and design of the Power One system please
refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2093

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-V-016-en - 09/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

78 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Power Duo System

The true classic connecting rail system creates a force- and

form-fit connection of precast concrete elements starting from a
thickness of 14 cm. Forces in three load directions are transferred
safely, shear forces parallel and right-angled to the joint as well
as tensile forces in rope direction. High design values as also the
consideration of fire exposure characterise this connection solu-
tion. A wide range of suitable mortar types completes the system.

Power Duo rails

Ref.-no. Dimensions
B1 B2 B3 H L L1 SL
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
84PDS700905 50 80 70 70
1250 190 90
84PDS200905 50 60 50 20

PHILIPP GmbH PHILIPP GmbH

Lilienthalstrasse 7-9 Lilienthalstrasse 7-9
63741 Aschaffenburg 63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0 Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440 Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2028 Z – 21.8-2066

Institut für Institut für

B2 B2
Werkstoffe im Bauwesen Werkstoffe im Bauwesen
Technische Universität
Darmstadt
Technische Universität
Darmstadt B3 B3

SL
H SL
H
L
B1 B1
L
L1 L1

PHILIPP Power Duo System For further details of the application and design of the Power Duo system please
refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2028

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2066

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-V-001-en - 02/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 79
 German approved systems

Power OS

A combination of know-how from the well-known connection sys-

tems of the Power series with the requirements of in-situ concrete
constructions the Power OS rail stands for. The German approved
system for connections between (semi-finished)precast elements/
in-situ concrete connections and in-situ or semi-finished ele-
ments consists of only one rail. High design values for all three
load directions are also available as standard here, and thus en-
able a wide range of applications. There is no mortar required by
using the Power OS rail.

Power OS rail
Ref.-no. Dimensions
B1 B2 H L L1 SL
[mm] [mm] [mm] [mm] [mm] [mm]
84POS201555 80 70 20 1250 250 155

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2093

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

SL
B1

B2

L L1

PHILIPP Power OS rail For further details of the application and design of the Power OS please refer to our
website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2098

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-V-017-en - 09/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

80 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Power Box System

Small but not a less powerful solution for a force- and form-fit con-
nection of precast concrete elements – the Power Box. With this,
shear forces parallel and right-angled to the joint are transferred
safely. High design values as also the consideration of fire expo-
sure characterise this connection solution.

Power Box
Ref.-No. Dimensions
SL B H L L1
[mm] [mm] [mm] [mm] [mm]
54PB120 120 80 25 220 190

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg

B
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1840

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

SL

L1
L

PHILIPP Power Box System For further details of the application and design of the Power Box system please
refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1840

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-V-002-en - 08/18 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 81
 Constructive rails and single loops
Connecting rails and loops are always used for construc-
tive connections when no forces have to be transferred
Connection technology

by the connection. In this regard, single loops or rails with

many variations leave nothing to be desired.

Features and benefits compact

 ounting parts for the constructive connection of precast concrete elements
M
Force- and form-fit connection through part geometry resp. profiling
Flexibility in rail depth, loop length and number
Different connection variants possible - wall-to-wall, wall-column, corner and T-connection
Rails can be shortened at any desired length, alternatively application-related positioning of individual boxes
Tight sealing of the rails (during concreting and hardening of the concrete) by durable plastic cover
Free choice of grouting material – concrete or mortar (grouting or Thixo mortar)
Simple installation, thus practical application
Also available in variant for lightweight concrete elements

82 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Connecting rail 50×20 Connecting rail 50×40 Connecting rail 50/70×70

Connecting loop - metal Connecting loop - plastic

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 83
 Constructive rails and single loops

Connecting rail

Connecting rails are a combination of a galvanized steel sheet pro-

file with regularly arranged wire rope loops which are inserted into
the rails tightly and ready for installation. The profiled surface of
the rail ensures a good adhesion with the concrete or mortar. In
various widths and heights as well as with different number and
length of loops the connecting rail is available.

Connecting rail B3
Ref.-no. Number Dimensions B1

SL H L B1 B2 B3 L1
[pcs.] [mm] [mm] [mm] [mm] [mm] [mm] [mm] SL

84VS20080 2 / 3 / 5 80 20 1250 50 50 60 190 H

84VS20100 2 / 3 / 5 100 20 1250 50 50 60 190 B2
L
84VS20120 2 / 3 / 5 120 20 1250 50 50 60 190
L1
84VS40080 2 / 3 / 5 80 40 1250 50 50 60 190
84VS40100 2 / 3 / 5 100 40 1250 50 50 60 190
84VS40120 2 / 3 / 5 120 40 1250 50 50 60 190
84VS70100 5 100 70 1250 70 50 80 190
The number of loops (2/3/5) has to be added to the reference number.

PHILIPP Connecting rails and loops For further details of the application and design of the Connecting rails please refer
to our website www.philipp-group.de.
VB3-V-004-en - 07/18 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

84 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Connecting loop

The single Connecting loop as the simplest device to create non-

load-bearing connections between precast concrete elements is
extremely easy to handle and use.

Connecting loop
Ref.-no. Dimensions
L L1 B H SL
[mm] [mm] [mm] [mm] [mm]
Metal box
54VSM080 160 190 50 20 80
54VSM100 160 190 50 20 100
54VSM120 160 190 50 20 120
54VSM140 190 190 50 20 140
Plastic box
54VS080 160 210 78 42 80
54VS100 160 210 78 42 100
54VS120 160 210 78 42 120

This version is a combination of a single steel wire rope and a This version is a combination of a single steel wire rope and a
metal recess former (box) in which the ready-for-use wire rope is plastic recess former (box) in which the ready-for-use wire rope
inserted. is inserted.

B B H
H

L1 L1

L L
SL SL

PHILIPP Connecting rails and loops For further details of the application and design of the Connecting loop please refer
to our website www.philipp-group.de.
VB3-V-004-en - 07/18 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 85
 Restraint dowel / dowelling system
Pocket-pin-connections are very typical for prefabricat-
ed constructions and often used as force-transferring
Connection technology

components or simply as a constructive connecting de-

vice. The latter includes the Restraint dowel plate as well
as the Dowelling system with its simple application.

Recommended use

Walls

Features and benefits compact

Restraint dowel plate
C onstructive connection by an angled steel component
Simple fixation of precast elements
Available in three versions - bright, galvanised or primed
Available with approved dowel on request

Dowelling system
C onstructive connection between stacked precast concrete elements
System of Rebar pocket and Concrete pocket
 hree pocket sizes for different rebar diameters
T
Flexibility in the alignment of the connection by shape and size of the Concrete pocket

86 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Restraint dowel plate Rebar pockets Concrete pocket

Connection: Rebar pocket / Restrain dowel plate Connection: Rebar pocket / Concrete pocket

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 87
 Restraint dowel / dowelling system

Restraint dowel plate

The Restraint dowel plate is used to fix precast concrete elements

safely to their position and creates also a constructive connection ØD
between.

LDo
L
M

LDü

Restraint dowel plate

Ref.-No. ØD LDo L M LDü
bright hot-dip galvanised primed [mm] [mm] [mm] [mm]
1 × Restraint dowel plate + 1 × dowel
72LDS220 72LDS220FV 72LDS220GR 20 150 260 16 135
1 × Restraint dowel plate
72LD220 72LD220FV 72LD220GR 20 150 260 - -

PHILIPP Restraint dowel plate For further details of the application and design of the Restraint dowel plate please
refer to our website www.philipp-group.de.
VB3-V-013-en - 03/16

Data sheet

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

88 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Dowelling system

For a simple fixation of two stacked concrete units the dowelling Both, the Rebar pocket and Concrete pocket are simply fixed to the
system is used. It consists of a Rebar pocket - available in three formwork by means of pocket holders during the production of the
sizes - for the upper precast concrete element, a Concrete pocket precast elements.
for the lower element and a suitable rebar to be provided on site.

72DT
72DH__
A
ØD
B
H a
Ød H1
b

h
72HH__ 72TH h1

Rebar pocket Concrete pocket

Ref.-no. Dimensions Colour Ref.-no. Dimensions Colour
ØD H A B H1
[mm] [mm] [mm] [mm] [mm]
72DH23 39 180 grey 72DT 87 56 150 black
72DH27 42 190 black
72DH33 49 200 blue

Rebar pocket holder Concrete pocket holder

Ref.-no. Dimensions Colour Ref.-no. Dimensions Colour
Ød H a b h1
[mm] [mm] [mm] [mm] [mm]
72HH23 23 30 anthracite 72TH 80 52 20 black
72HH27 27 30 black
72HH33 33 33 blue

PHILIPP Dowelling system For further details of the application and design of the Dowelling system please refer
to our website www.philipp-group.de.
VB3-V-006-en - 04/18 - PDF

Data sheet

/ Products / Transport and Mounting Systems / Connection technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 89
 Impressive facades need load-bearing connection devices
The appearance of many prefabricated buildings is essentially determined by the design of their facades.
Very often, these precast concrete elements are produced in the economical sandwich technology, which
includes a load-bearing layer, an inner insulation (layer) and a visible facing layer.
A common way to connect the facing layer to the load-bearing layer is to use anchors made of stainless
steel. These form a system of load-bearing anchors and pins, which transfers horizontal and vertical forces
into the load-bearing layer.
Both, the SPA and SA/FA system are two well established, long-time tested and state of the art solutions for
sandwich elements. For all these anchor types German approvals are available including generally accepted
calculation methods. For the design a user-friendly software is available as freeware on our website.
Facade technology

90 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Facade technology
Sandwich panel anchor system SA / FA Page 92
Sandwich panel anchor system SPA Page 98
Sandwich FT Anchor Page 102

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 91
 System SA / FA
With the load-bearing anchors SA (Sleeve anchors) and/
or FA (Flat anchors) one is prepared for almost all chal-
lenges concerning the connection of the facing layer
with the load-bearing layer. Various systems from both
types of load-bearing anchors offer a wide range of solu-
Facade technology

tions. High design resistances of the components made

of high-quality stainless steel combined with the mini-
mum possible use material input result in a very eco-
nomical anchoring system.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Features and benefits compact

German approval DIBt, also KIWA certified
Insulation thicknesses from 3 to 25 cm possible
Simple design using the free software for sandwich panels
Detailed static verification by design software (for architects, consultants, institutes and engineers)
All system components made of high-quality stainless steel (SS316) for a permanent corrosion resistance

Design software
PHILIPP provides a free software for the de-
sign of the sandwich panel anchor systems.
Here are some advantages of the software
available on the PHILIPP website: www.philipp-group.de

S imple and easy to understand user interface

Separation of geometry input and design
Fast design optimized for economic efficiency
Detailed and comprehensible design results
Interface to the CAD system STRAKON from DICAD

92 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Load-bearing anchors SA Load-bearing anchors FA Load-bearing anchor CPC

Connector pins VN Connector pins VB Connector pins AN

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 93
 Sandwich panel anchor SA / FA

Load-bearing anchor SA (Sleeve anchor)

As a single load-bearing anchor it should usually be positioned PHILIPP GmbH

Lilienthalstrasse 7-9
63741 Aschaffenburg

in the centre of gravity of the sandwich element. Due to its cylin-

Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Ød Z – 21.8-2013

drical design, a load transfer in all directions is ensured and thus Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

turning of the element can be done without any problems. The t

system with Sleeve anchor is possible to be used for insulation
thicknesses up to 15 cm and has to be completed by a Flat anchor
or Connector pin cross to avoid a torsion of the facing layer.
Alternatively, it is possible to combine the Sleeve anchor with a
load-bearing Flat anchor. H

Load-bearing anchor SA
Ref.-no. Dimensions
Ød t H
[mm] [mm] [mm]
77MA15___051 51 1.5 150 175 200 225 260 300
77MA15___076 76 1.5 150 175 200 225 260 300
77MA15___102 102 1.5 150 175 200 225 260 300
77MA15___127 127 1.5 150 175 200 225 260 300
77MA15___153 153 1.5 150 175 200 225 260 300
77MA15___178 178 1.5 150 175 200 225 260 300
77MA15___204 204 1.5 150 175 200 225 260 300
77MA15___229 229 1.5 150 175 200 225 260 300
77MA15___255 255 1.5 150 175 200 225 260 300
77MA15___280 280 1.5 150 175 200 225 260 300
The reference number has to be added by the required height H of the anchor.
E.g. load-bearing anchor SA, anchor thickness t = 1.5 mm, height H =225 mm, Ød = 204 mm  ref.-no.: 77MA15225204

PHILIPP Sandwich panel anchor system SA / FA For further details of the application and design of the Sandwich panel anchor SA/
FA please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2013

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

94 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Load-bearing anchor FA (Flat anchor)

Flat anchors are characterised by their flat design and the re- PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg

sulting significant reduction in installation effort for sandwich

Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

t Z – 21.8-2013

elements. With both, the system, which is available in many sizes, L

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

as well as minimal edge distances, almost all problems up to an

insulation layer thickness of 25 cm can be solved. High design re-
sistances are achieved with the thin stainless steel sheet, so that
this system can be used universally.

Load bearing anchor FA

Ref.-No. Dimensions
L t H
[mm] [mm] [mm]

80
77FA15______ 1.5 150 175 200 225 260 - - - -
120
160
200
77FA20______ 240 2.0 150 175 200 225 260 280 300 320 360
280
320
360
77FA30______ 3.0 - - - - 260 280 300 320 360
400

The reference number has to be added by the required height H and length L of the anchor.
E.g. load-bearing anchor FA, anchor thickness t = 3.0 mm, height H =280 mm, L = 320 mm  ref.-no.: 77FA30280320

PHILIPP Sandwich panel anchor system SA / FA For further details of the application and design of the Sandwich panel anchor SA /
FA please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2013

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 95
 Sandwich panel anchor SA / FA

Load bearing anchor CPC (Connector Pin Cross)

The Connector pin cross is a very simple load-bearing system con- Required Connector pin length of the load-bearing anchor CPC
sisting of two Connector pins positioned at a 90° angle to each
Insulation Required Connector pin lengths
other. For small to medium element sizes this low-priced system is thickness L
applicable and achieves very good design resistances without any hD CPC-04 CPC-05 CPC-06
additional reinforcement. Basically, the length L of the Connector [mm] [mm] [mm] [mm]
pins depends on the insulation thickness hD. 30 220 220 (220)
40 240 240 (240)
50
260 260 260
60
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

70 280 280 280

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität

80
Darmstadt

300 300 300

90
100 320 320 320
110
340 340 340
Ød L 120
130 360 360 360
140 400 380 380
150
400 (400) 400
160
170 (420) (420) 420
180
(440) (440) (440)
190
200 (460) (460) (460)
210 (480) (480) (480)
220
(500) (500) (500)
230
240 (520) (520) (520)
250
(540) (540) (540)
260
Values in brackets (...) are special lengths

PHILIPP Sandwich panel anchor system SA / FA For further details of the application and design of the Sandwich panel anchor SA /
FA please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2013

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

96 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Connector pins VN / VB / AN

In order to reduce the deformations within a sandwich element,

VN
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg

pins are distributed over the entire panel in a designed, regular

Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Ød
grid. These pins are available in three types, Connector pins (VN), Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Connector stirrups (VB) and Clip-on pins (AN), and are always com- Ød
bined with a load-bearing anchor system. The stainless steel pins
available for each insulation layer thickness are provided in three H
H
diameters (Ø4, 5 and 6 mm) and are very easy to handle during
installation. H
Ød VB AN

Connector pin
Ref.-no. H Connector pin (type VN) Connector stirrup (type VB) Clip-on pin (type AN)
[mm] Ød = 4.0 Ød = 5.0 Ød = 6.0 Ød = 4.0 Ød = 5.0 Ød = 4.0 Ød = 5.0
77____160 160 VN40 - - VB40 - AN40 AN50
77____180 180 VN40 - - VB40 - AN40 AN50
77____200 200 VN40 VN50 - VB40 - AN40 AN50
77____220 220 VN40 VN50 - VB40 - AN40 AN50
77____240 240 VN40 VN50 - VB40 VB50 AN40 AN50
77____250 250 - - - VB40 VB50 AN40 AN50
77____260 260 VN40 VN50 - - - - -
77____280 280 VN40 VN50 - - VB50 AN40 AN50
77____300 300 VN40 VN50 - - VB50 AN40 AN50
77____320 320 - VN50 VN60 - VB50 - AN50
77____340 340 - VN50 VN60 - - - AN50
77____360 360 - - VN60 - - - AN50
77____380 380 - - VN60 - - - AN50
77____400 400 - - VN60 - - - -
77____420 420 - - VN60 - - - -
77____440 440 - - VN60 - - - -
77____460 460 - - VN60 - - - -
77____480 480 - - VN60 - - - -
77____500 500 - - VN60 - - - -
77____520 520 - - VN60 - - - -
The reference number has to be added by the required pin type and diameter.
E.g. Connector pin type  VN; pin diameter Ød = 5.0 mm  50; height H = 280 mm  ref.-no.: 77VN50280

PHILIPP Sandwich panel anchor system SA / FA For further details of the application and design of the Sandwich panel anchor SA/
FA please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-2013

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 97
 System SPA
Sandwich panel anchor SPA are convincing despite their
filigree design with high load-bearing capacities and
low thermal bridges (thermal optimized system). Vari-
ous combinations allow a wide range of applications for
connecting the load-bearing layer with the facing lay-
Facade technology

er. Load-bearing anchors SPA are well-established with

their possibilities and applications for many years and
together with the systems SA/FA they complete the
standard range of sandwich anchor systems stain-
less steel-based. PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Features and benefits compact

German approval DIBt, also KIWA certified
Insulation thicknesses from 3 to 40 cm possible
Simple design using the free software for sandwich panels
Detailed static verification by design software (for architects, consultants, institutes and engineers)
All system components made of high-quality stainless steel (SS316) for a permanent corrosion resistance

Design software
PHILIPP provides a free software for the de-
sign of the sandwich panel anchor systems.
Here are some advantages of the software
available on the PHILIPP website: www.philipp-group.de

S imple and easy to understand user interface

Separation of geometry input and design
Fast design optimized for economic efficiency
Detailed and comprehensible design results
Interface to the CAD system STRAKON from DICAD

98 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Load-bearing anchors SPA-1 Load-bearing anchors SPA-2 Load bearing anchors CPC

see page 94

Connector pins VN Connector pins VB Connector pins AN

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 99
 Sandwich panel anchor SPA

Load-bearing anchor SPA

SPA load-bearing anchors with their product combinations of Load-bearing anchor SPA-1 / SPA-2
two types (SPA-1, SPA-2), four diameters and many heights cov-
Ref.-no. Ref.-no. Dimensions
er the widest range of applications. Insulation thicknesses up to SPA-1 SPA-2 Ød H L
40 cm are possible. Small cross sections reduce thermal bridges [mm] [mm] [mm]
to a minimum, high design resistances prove the efficiency of this 77SPA1050160 77SPA2050160 5.0 160 263
load-bearing anchor system. 77SPA1050180 77SPA2050180 5.0 180 303
77SPA1050200 77SPA2050200 5.0 200 343
PHILIPP GmbH
77SPA1050220 77SPA2050220 5.0 220 383
77SPA1050240 77SPA2050240 5.0 240 423
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

77SPA1050260 77SPA2050260 5.0 260 463

Z – 21.8-1986

Institut für

L
Werkstoffe im Bauwesen

77SPA1070160 77SPA2070160 6.5 160 259

Technische Universität
Darmstadt

Ød
77SPA1070180 77SPA2070180 6.5 180 299
77SPA1070200 77SPA2070200 6.5 200 338
77SPA1070220 77SPA2070220 6.5 220 378
0
108020
77SPA
Nr.:
Artikel

/ 200
- Ø8
SPA1
Typ:

77SPA1070240 77SPA2070240 6.5 240 419

77SPA1070260 77SPA2070260 6.5 260 458
H

77SPA1070280 77SPA2070280 6.5 280 498

77SPA1070300 77SPA2070300 6.5 300 538
77SPA1070320 77SPA2070320 6.5 320 579
77SPA1080180 77SPA2080180 8.0 180 294
77SPA1080200 77SPA2080200 8.0 200 335
77SPA1080220 77SPA2080220 8.0 220 374
PHILIPP GmbH
77SPA1080240 77SPA2080240 8.0 240 414
77SPA1080260 77SPA2080260 8.0 260 453
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

77SPA1080280 77SPA2080280 8.0 280 494

Z – 21.8-1986

L Institut für
Werkstoffe im Bauwesen

77SPA1080300 77SPA2080300 8.0 300 534

Technische Universität
Darmstadt

Ød 77SPA1080320 77SPA2080320 8.0 320 574

0
208020

77SPA1080340 77SPA2080340 8.0 340 613

77SPA
Nr.:
Artikel

/ 200
- Ø8
SPA2
Typ:

77SPA1080360 77SPA2080360 8.0 360 654

77SPA1100180 77SPA2100180 10.0 180 287
77SPA1100200 77SPA2100200 10.0 200 327
H

77SPA1100220 77SPA2100220 10.0 220 366

77SPA1100240 77SPA2100240 10.0 240 407
77SPA1100260 77SPA2100260 10.0 260 447
77SPA1100280 77SPA2100280 10.0 280 487
77SPA1100300 77SPA2100300 10.0 300 528
77SPA1100320 77SPA2100320 10.0 320 567
77SPA1100340 77SPA2100340 10.0 340 607
77SPA1100360 77SPA2100360 10.0 360 646
77SPA1100380 77SPA2100380 10.0 380 686
77SPA1100400 77SPA2100400 10.0 400 726
77SPA1100420 77SPA2100420 10.0 420 767
77SPA1100440 77SPA2100440 10.0 440 806
77SPA1100460 77SPA2100460 10.0 460 846
77SPA1100480 77SPA2100480 10.0 480 885
77SPA1100500 77SPA2100500 10.0 500 926
77SPA1100520 77SPA2100520 10.0 520 966

PHILIPP Sandwich panel anchor system SPA For further details of the application and design of the Sandwich panel anchor SPA
please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-F-002-en - 04/18 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

100 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Connector pin VN / VB / AN

In order to reduce the deformations within a sandwich element,

VN
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg

pins are distributed over the entire panel in a designed, regular

Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Ød
grid. These pins are available in three types, Connector pins (VN), Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt

Connector stirrups (VB) and Clip-on pins (AN), and are always com- Ød
bined with a load-bearing anchor system. The stainless steel pins
available for each insulation layer thickness are provided in three H
H
diameters (Ø4, 5 and 6 mm) and are very easy to handle during
installation. H
Ød VB AN

Connector pin
H Ref.-no. Connector pin (type VN) Connector stirrup (type VB) Clip-on pin (type AN)
[mm] Ød = 4.0 Ød = 5.0 Ød = 6.0 Ød = 4.0 Ød = 5.0 Ød = 4.0 Ød = 5.0
77____160 160 VN40 - - VB40 - AN40 AN50
77____180 180 VN40 - - VB40 - AN40 AN50
77____200 200 VN40 VN50 - VB40 - AN40 AN50
77____220 220 VN40 VN50 - VB40 - AN40 AN50
77____240 240 VN40 VN50 - VB40 VB50 AN40 AN50
77____250 250 - - - VB40 VB50 AN40 AN50
77____260 260 VN40 VN50 - - - - -
77____280 280 VN40 VN50 - - VB50 AN40 AN50
77____300 300 VN40 VN50 - - VB50 AN40 AN50
77____320 320 - VN50 VN60 - VB50 - AN50
77____340 340 - VN50 VN60 - - - AN50
77____360 360 - - VN60 - - - AN50
77____380 380 - - VN60 - - - AN50
77____400 400 - - VN60 - - - -
77____420 420 - - VN60 - - - -
77____440 440 - - VN60 - - - -
77____460 460 - - VN60 - - - -
77____480 480 - - VN60 - - - -
77____500 500 - - VN60 - - - -
77____520 520 - - VN60 - - - -
The reference number has to be added by the required pin type and diameter.
E.g. connector pin type  VN; pin diameter Ød = 5.0 mm  50; height H = 280 mm  Ref.-No.: 77VN50280

PHILIPP Sandwich panel anchor system SPA For further details of the application and design of the Sandwich panel anchor SPA
please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 21.8-1986

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-F-002-en - 04/18 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 101
 FT Anchor
Even the simple and efficient fixing of window and door
elements is also a challenge for reinforced precast con-
crete sandwich elements. Ideally, these elements should
be located in the insulation layer in order to benefit from
building physics advantages. The FT Anchor for doors,
Facade technology

windows and other openings in sandwich panels and

insulated double walls fulfil these requirements with a
clever combination of material and construction.

Features and benefits compact

Simple installation
No thermal bridges, as the anchor is made of glass-fibre reinforced plastic
Effortless and exact fixation of door and window elements

Design software
For the planning of FT Anchors in reinforced concrete sandwich elements the free-of-charge PHILIPP design
software can be taken. Besides the actual design of load-bearing anchors and pins the use of FT Anchors can be
specified for each opening by a few clicks.
E xact U-value calculation enables www.philipp-group.de
thermal optimisation of single pan-
els or entire façades - here all ther-
mal losses via anchors and joints are
considered.

102 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Insulation thickness 60 mm / 80 mm / 120 mm

Insulation thickness > 120 mm

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 103
 FT Anchor

FT Anchor

The window and door anchor (FT Anchor) enables a quick fixa-
tion of opening elements in reinforced precast concrete sandwich
panels or insulated double walls by its simple angle design and its
glass fibre reinforced plastic compound. By means of self-drilling
screws windows and doors are installed directly in the insulation
h
level and without thermal bridges. As the FT Anchor is already in-
stalled during the production of the sandwich panel or insulated
double wall, this results in a noticeable time advantage at the con-
struction site.
b l

FT Anchor
Ref.-no. Dimensions
b l h
[mm] [mm] [mm]
77FTA060 60 100 73
77FTA080 80 100 73
77FTA120 120 140 73

PHILIPP FT Anchor

The PHILIPP FT Anchor is used for the fixation of doors,

windows and comparable components in precast concrete
sandwich elements and insulated double walls. As the ap-
plication is quite simple the fixation in the precast elements
is done fast and easily.
Glass fibre reinforced plastic is the main constituent the h
FT Anchor is made of, so no thermal bridges in a sandwich
element are the result. FT Anchors are available in a width
of 60, 80 and 120 mm. Other insulation layers are bridged
by reinforcements in the bearing layer.
b l

Picture 1

Table 1: Dimensions of the FT Anchor

Ref.-No. b l h
[mm] [mm] [mm]
77FTA060 60 100 73

For further details of the application and design of the FT Anchor please refer to our
77FTA080 80 100 73

77FTA120 120 140 73

PHILIPP FT Anchor

website www.philipp-group.de.
b b > 120 mm

Picture 2 Picture 3

Advantages of the window and door fixation anchor:

Easy installation
already during the production of sandwich elements
VB3-F-003-en - 08/19 - PDF

Noticeable time saving

caused by fast mounting of windows and doors at the
job-site.
Effortless and exact fixation
of door and window elements
No thermal bridges
as the anchor is made of glass fibre plastic

Picture 4 Previous solution Picture 5 FT Anchor Solution

www.philipp-group.de
Installation Instruction

/ Products / Transport and Mounting Systems / Facade technology

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • August 2019 2

104 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Facade technology

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 105
 Fixing sockets with our promise: stronger than the concrete
Fixations are as important as connections in prefabricated concrete elements. Because often elements have
to be fixed directly to prefabricated concrete panels, slabs or beams, and this should be done very fast and
simple to minimise mounting costs. Prefabricated fixing points with high load-bearing capacities offer ideal
conditions for this in comparison to retrofitted solutions.
Fixing technology

106 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Fixing technology
Fixing sockets Page 108
Corner guards Page 112

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 107
 Fixing sockets
Fixing sockets are available in four different designs
and thus open up numerous possibilities for fixing ele-
ments of all kinds to precast concrete parts, regardless of
whether on the face or surface side. These fixing points
already integrated in the precast concrete element save
time during installation compared to e.g. dowel-solutions
Fixing technology

and have a capacity of up to 2.75 t. All types of fixing

sockets are also available in stainless steel.

Features and benefits compact

L ow-priced fixing elements
Wide range of metric thread sizes
High efficiency, high load capacities achieved with a minimum of material
Suitable for the transfer of tensile and/or shear forces
Load bearing capacities up to 27.5 kN
Time savings on the job site due to pre-planned fixing points
Numerous installation situations possible due to four different anchorage variants in the concrete
Available in galvanised as well as stainless steel version

108 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Cross pin Cross hole Waved end Angular end

Cross pin and nailing plate Cross hole and nailing plate Waved end and nailing plate Angular end and nailing plate

The fixing sockets are also available in stainless steel on request

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 109
 Fixing sockets

Fixing socket with cross pin / cross hole

Fixing socket with cross pin

Ref.-no. Type Perm. F Dimensions
h
galvanised [mm]
M [kN] ØD h e d f d
6807212060 12 5.0 17.0 60 13.0 50.0 10
6807216080 16 8.0 22.5 80 19.0 50.0 12 e
6807216100 16 10.0 22.5 100 19.0 50.0 12
6807220095 20 12.0 27.0 95 20.0 85.0 14
6807220115 20 13.0 27.0 115 20.0 85.0 14 f M
6807224120 24 18.0 32.0 120 24.0 85.0 14 ØD
Also available in stainless steel.

Fixing socket with cross hole

Ref.-no. Type Perm. F Dimensions
galvanised [mm] h
Ød
M [kN] ØD h e Ød
6801206040 6 1.5 9.0 40 8 6.3
6801208040 8 2.0 11.0 40 10 8.3 e

6801208050 8 2.5 11.0 50 10 8.3

6801210050 10 3.5 13.5 50 11 8.3
6801212060 12 5.0 17.0 60 13 12.2
M
6801212070 12 6.0 17.0 70 13 12.2 ØD
6801216070 16 7.0 22.5 70 19 12.2
6801216080 16 8.0 22.5 80 19 12.2
6801216100 16 10.0 22.5 100 19 12.2
6801216120 16 12.0 22.5 120 19 12.2
6801220100 20 12.5 27.0 100 20 14.3
6801220120 20 14.0 27.0 120 20 14.3
6801224120 24 18.0 32.0 120 24 14.3
6801230150 30 27.5 42.0 150 30 17.2
Also available in stainless steel.

PHILIPP Fixing sockets For further details of the application and design of the Fixing sockets please refer to
our website www.philipp-group.de.
VB3-B-001-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Fixing technology www.philipp-group.de

110 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Fixing socket with waved end / angular end

Fixing socket with waved end

Ref.-no. Type Perm. F Dimensions
galvanised [mm] h
M [kN] ØD h e
6803210040 10 3.0 13.5 40 11.0
6803210060 10 4.0 13.5 60 11.0 e

6803212050 12 4.0 17.0 50 13.0

6803212070 12 6.0 17.0 70 13.0
6803216070 16 7.0 22.5 70 19.0
M
6803216100 16 10.0 22.5 100 19.0 ØD
6803220100 20 12.5 27.0 100 20.0
6803224100 24 16.0 32.0 100 24.0
Also available in stainless steel.

Fixing socket with angular end

Ref.-no. Type Perm. F Dimensions
galvanised [mm] h
d
M [kN] ØD h e d
6805208035 8 1.8 11.0 35 10 25 e
6805210060 10 4.0 13.5 60 11 25
6805212045 12 3.5 17.0 45 13 25
6805212070 12 6.0 17.0 70 13 25
6805216060 16 6.0 22.5 60 19 35
M
6805216100 16 10.0 22.5 100 19 35 ØD
6805216130 16 12.0 22.5 130 19 35
6805220100 20 12.5 27.0 100 20 35
Also available in stainless steel.

PHILIPP Fixing sockets For further details of the application and design of the Fixing sockets please refer to
our website www.philipp-group.de.
VB3-B-001-en - 01/16

Installation and Application Instruction

/ Products / Transport and Mounting Systems / Fixing technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 111
 Corner guards
Corner guards are installed to protect edges of precast
reinforced concrete elements, e.g. columns or walls. Both
the angle geometry itself, the material and the anchoring
elements in the prefabricated part are available in vari-
ous designs, so that numerous combinations are possible
and therefore leave hardly any wishes unfulfilled.
Fixing technology

The installation into the precast element is very easy due

to the optimised angled design and the non-disturbing
anchoring elements for the corner reinforcement.

Features and benefits compact

 eady for installation with anchoring reinforcement
R
Optimised angled design for precise fitting in the formwork
Available in three standard lengths - on request also in special lengths
Diverse combinations of angle types and anchoring elements available
Available in galvanised steel or stainless steel

112 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Type 1 Type 2 Type 3

Angle

FV - hot-dip galvanised
82KSW 1 A 050 1500 FV A4 - stainless steel SS316
A2 - stainless steel SS304
Reinforcement

Type A Type B Type C

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 113
 Corner guard

Corner guard type 1A / 2A / 3A

Corner guard type 1A Corner guard type 2A Corner guard type 3A /2A /3A
Ref.-no. Angle L Ref.-no. Angle L Ref.-no. Angle L
type 1 [mm] type 2 [mm] type 3 [mm]
82KSW1A0501000__ 1000 82KSW2A0501000__ 1000 82KSW3A0501000__ 1000
82KSW1A0501500__ 50×5 1500 82KSW2A0501500__ 50×5 1500 82KSW3A0501500__ 53×5 1500
82KSW1A0502000__ 2000 82KSW2A0502000__ 2000 82KSW3A0502000__ 2000
82KSW1A0601000__ 1000 82KSW2A0601000__ 1000 82KSW3A0601000__ 1000
82KSW1A0601500__ 60×6 1500 82KSW2A0601500__ 60×6 1500 82KSW3A0601500__ 64×6 1500
82KSW1A0602000__ 2000 82KSW2A0602000__ 2000 82KSW3A0602000__ 2000
82KSW1A0801000__ 1000 82KSW2A0801000__ 1000 82KSW3A0801000__ 1000
82KSW1A0801500__ 80×6 1500 82KSW2A0801500__ 80×8 1500 82KSW3A0801500__ 84×6 1500
82KSW1A0802000__ 2000 82KSW2A0802000__ 2000 82KSW3A0802000__ 2000
82KSW1A1001000__ 1000 82KSW2A1001000__ 1000 82KSW3A1001000__ 1000
82KSW1A1001500__ 100×8 1500 82KSW2A1001500__ 100×8 1500 82KSW3A1001500__ 110×8 1500
82KSW1A1002000__ 2000 82KSW2A1002000__ 2000 82KSW3A1002000__ 2000

PHILIPP Corner guard For further details of the application and design of the Corner guard please refer to
our website www.philipp-group.de.
VB3-B-006-en - 08/18

www.philipp-group.de
Data sheet

/ Products / Transport and Mounting Systems / Fixing technology

114 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Corner guard type 1B / 2B / 3B

Corner guard type 1B Corner guard type 2B Corner guard type 3B

Ref.-no. Angle L Ref.-no. Angle L Ref.-no. Angle L
type 1 [mm] type 2 [mm] type 3 [mm]
82KSW1B0501000__ 1000 82KSW2B0501000__ 1000 82KSW3B0501000__ 1000
82KSW1B0501500__ 50×5 1500 82KSW2B0501500__ 50×5 1500 82KSW3B0501500__ 53×5 1500
82KSW1B0502000__ 2000 82KSW2B0502000__ 2000 82KSW3B0502000__ 2000
82KSW1B0601000__ 1000 82KSW2B0601000__ 1000 82KSW3B0601000__ 1000
82KSW1B0601500__ 60×6 1500 82KSW2B0601500__ 60×6 1500 82KSW3B0601500__ 64×6 1500
82KSW1B0602000__ 2000 82KSW2B0602000__ 2000 82KSW3B0602000__ 2000
82KSW1B0801000__ 1000 82KSW2B0801000__ 1000 82KSW3B0801000__ 1000
82KSW1B0801500__ 80×6 1500 82KSW2B0801500__ 80×8 1500 82KSW3B0801500__ 84×6 1500
82KSW1B0802000__ 2000 82KSW2B0802000__ 2000 82KSW3B0802000__ 2000
82KSW1B1001000__ 1000 82KSW2B1001000__ 1000 82KSW3B1001000__ 1000
82KSW1B1001500__ 100×8 1500 82KSW2B1001500__ 100×8 1500 82KSW3B1001500__ 110×8 1500
82KSW1B1002000__ 2000 82KSW2B1002000__ 2000 82KSW3B1002000__ 2000

PHILIPP Corner guard For further details of the application and design of the Corner guard please refer to
our website www.philipp-group.de.
VB3-B-006-en - 08/18

www.philipp-group.de
Data sheet

/ Products / Transport and Mounting Systems / Fixing technology

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 115
 Corner guard

Corner guard type 1C / 2C / 3C

Corner guard type 1C Corner guard type 2C Corner guard type 3C

Ref.-no. Angle L Ref.-no. Angle L Ref.-no. Angle L
type 1 [mm] type 2 [mm] type 3 [mm]
82KSW1C0501000__ 1000 82KSW2C0501000__ 1000 82KSW3C0501000__ 1000
82KSW1C0501500__ 50×5 1500 82KSW2C0501500__ 50×5 1500 82KSW3C0501500__ 53×5 1500
82KSW1C0502000__ 2000 82KSW2C0502000__ 2000 82KSW3C0502000__ 2000
82KSW1C0601000__ 1000 82KSW2C0601000__ 1000 82KSW3C0601000__ 1000
82KSW1C0601500__ 60×6 1500 82KSW2C0601500__ 60×6 1500 82KSW3C0601500__ 64×6 1500
82KSW1C0602000__ 2000 82KSW2C0602000__ 2000 82KSW3C0602000__ 2000
82KSW1C0801000__ 1000 82KSW2C0801000__ 1000 82KSW3C0801000__ 1000
82KSW1C0801500__ 80×6 1500 82KSW2C0801500__ 80×8 1500 82KSW3C0801500__ 84×6 1500
82KSW1C0802000__ 2000 82KSW2C0802000__ 2000 82KSW3C0802000__ 2000
82KSW1C1001000__ 1000 82KSW2C1001000__ 1000 82KSW3C1001000__ 1000
82KSW1C1001500__ 100×8 1500 82KSW2C1001500__ 100×8 1500 82KSW3C1001500__ 110×8 1500
82KSW1C1002000__ 2000 82KSW2C1002000__ 2000 82KSW3C1002000__ 2000

PHILIPP Corner guard For further details of the application and design of the Corner guard please refer to
our website www.philipp-group.de.
VB3-B-006-en - 08/18

www.philipp-group.de
Data sheet

/ Products / Transport and Mounting Systems / Fixing technology

116 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Fixing technology

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 117
 If you don’t want to hear anything, please read
Requirements from buildings physics are also becoming more and more important in the prefabricated build-
ing technology. Here, the protection of human health but also rising demands on comfort are playing an
increasingly important role.
Sound insulation takes up a considerable part here, so that unacceptable disturbances due to sound transmis-
sion are avoided. In addition to air-borne sound insulation, impact sound insulation is an important component
when considering the structural physics of a building.
In storey buildings, stair flights and landings must be installed soundproofed so that impact sound trans-
mission from the staircase via the staircase walls or floor slabs is prevented. In case of precast reinforced
concrete elements, suitable decoupling elements can meet this requirement.
The secret of sound insulation lies in the actual elastomer bearings, which are the most important part of the
bearings.
Noise reduction technology

118 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Noise reduction technology

Bearing system with noise reduction Page 120

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 119
Noise reduction technology

Bearing system with noise reduction

The Bearing system with noise reduction (TSS) is ap-
proved for the sound-insulated bearing of precast re-
inforced concrete elements such as stairs of all kinds,
landings, floor slabs and beam-like elements. It is suitable
for use indoors as well as outdoors under predominantly
static loads.
On one side the system consists of the installation parts
(bearing element, optional fire protection plate and a
shear dowel) and on the other side of a threaded
anchor, into which the bolt and bearing ele- PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0

ment are screwed later.

Fax +49 (0) 6021 / 40 27-440

Overall, the Bearing system with noise re- Institut für

Werkstoffe im Bauwesen
Technische Universität
Darmstadt

duction and fire protection convinces by

its easy handling, economical anchoring
(transport anchor can be used for the final
bearing) and a considerable impact sound
reduction.

Features and benefits compact

Approved by DIBt (German approval)
Installation distances up to 80 mm tested and approved.
Noise reduction according to the increased level of DIN 4109 (part 2).
Fire protection F90 according to DIN 4102-2 by using the Fire protection plate.

Noise reduction technique

Installation parts Parts set in concrete

Bearing element Fire protection Threaded bolt Threaded anchors

plate
(optional) Compact anchor wavy tail straight tail angled

Bearing casing

Plastic bushing

Steel plate

Elastomeric bearing

120 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Bearing element Threaded bolt Fire protection plate

Compact anchor Threaded anchor (wavy tail) Threaded anchor (straight tail) Threaded anchor (angled)

The Bearing system with noise reduction and fire protection is also available in stainless steel.

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 121
 Bearing system with noise reduction

Bearing element / threaded bolt

Bearing element
b Ref.-no. t h hA Elastomeric bearing Steel plate
[mm] [mm] [mm] [mm]
Galvanised version
h
67TSEN-CIP Cipremont® Bright zinc hA
132 88 76 45
67TSEN Compression bearing plated
Stainless steel version
67TSENVA-CIP Cipremont® Stainless b
132 88 76 45 t
67TSENVA Compression bearing steel

Threaded bolt
Ref.-no.
Thread e LB
M [mm] [mm]
S355 galvanised (marking ST) M
670TSSN160ST 160
670TSSN170ST 170 e
670TSSN180ST 180
670TSSN190ST M36 60 190 ST LB
670TSSN200ST 200
670TSSN210ST 210
670TSSN220ST 220
Tempered steel (marking 8)
670TSSN1608 160
670TSSN1708 170
670TSSN1808 180
670TSSN1908 M36 60 190 8

670TSSN2008 200
670TSSN2108 210
670TSSN2208 220
Stainless steel S460 (marking VA)
670TSSN160VA 160
670TSSN170VA 170
670TSSN180VA 180
670TSSN190VA M36 60 190 VA

670TSSN200VA 200
670TSSN210VA 210
670TSSN220VA 220

PHILIPP Bearing system with noise reduction For further details of the application and design of the Bearing system with noise
reduction and fire protection please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 15.7-332

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-S-001-en - 02/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Noise Reduction System www.philipp-group.de

122 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Threaded anchors

Compact anchor
Ref.-no. Thread ØD1 L Øds
[mm] [mm] [mm]
Galvanised version
67TSS360235 RD 36 60 235 25 Øds
Stainless steel version
L
75TSS360235VA RD 36 60 235 25
ØD1

Threaded anchor (wavy tail)

Ref.-no. Thread L Øds
[mm] [mm]
Galvanised version Øds
67M36K RD 36 380 25
67M36WE RD 36 570 25
L
Stainless steel version
75M36VAK RD 36 380 25
75M36VAWE RD 36 570 25

Threaded anchor (straight tail)

Ref.-no. Thread L Øds
[mm] [mm]
Galvanised version Øds
67M36 RD 36 690 25
67M361100 RD 36 1100 25
L
Stainless steel version
75M36VA RD 36 690 25
75M361100VA RD 36 1100 25

PHILIPP Bearing system with noise reduction For further details of the application and design of the Bearing system with noise
reduction and fire protection please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 15.7-332

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-S-001-en - 02/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Noise Reduction System www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 123
 Bearing system with noise reduction

Threaded anchor / fire protection plate

Threaded anchor (45° angled)

Ref.-no. Thread Øds a la wb
[mm] [mm] [mm] [°]
Galvanised version
67M360850GE45 RD 36 25 165 690 45° la Øds

Stainless steel version a

75M360850VAGE45 RD 36 25 165 690 45° wb

Fire protection plate

Ref.-no. Type d b
[kg/m3] [mm] [mm]
67TSBMN020 150 20 150 b b
67TSBMN030 150 30 150
67TSBMN050 150 50 150 d
Arti

67T
kel
Nr.:
Typ

150 SBM
:

kg/m N02
³ 0

20

PHILIPP Bearing system with noise reduction For further details of the application and design of the Bearing system with noise
reduction and fire protection please refer to our website www.philipp-group.de.
PHILIPP GmbH
Lilienthalstrasse 7-9
63741 Aschaffenburg
Tel . +49 (0) 6021 / 40 27-0
Fax +49 (0) 6021 / 40 27-440

Z – 15.7-332

Institut für
Werkstoffe im Bauwesen
Technische Universität
Darmstadt
VB3-S-001-en - 02/19 - PDF

Installation Instruction

/ Products / Transport and Mounting Systems / Noise Reduction System www.philipp-group.de

124 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Noise Reduction System

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 125
 Wide range of earthing technology
Earthing technology is always used when a defined reference potential or potential equalisation shall to be
provided. This is to short-circuit any voltages that may occur. In principle, measures are taken which are nec-
essary for the connection of an electrical part to earth.
Earthing technology

126 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Earthing technology
Earthing technology Page 128

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 127
 Earthing technology for traffic sector
Earthing measures applied in the area of electrically op-
erated railways belong to the group of railway earthing.
With these special products, the reinforcement of pre-
cast reinforced concrete elements in the neighbourhood
Earthing technology

of electrical installations under high voltage is to be

earthed.
A wide range of Earthing sleeves and connectors allows a
variety of possible combinations.
All Earthing sleeves and connectors are approved
by Deutsche Bahn (DB) and ÖBB (German and
Austrian Federal Railways).

Earthing sleeves
Type Version Product DB  ÖBB 
01
Earthing sleeve 01
straight flat steel
F40 02
Flat steel double-sided Earthing sleeve 02 Ebs 15.03.19-11 ED 6409 Bl.5
40 mm × 5 mm straight flat steel 03
03
Earthing sleeve
90° angled flat steel
01
Earthing sleeve 01
straight rebar
71 EB B16
02 02
Earthing sleeve Reinforcement
double-sided Earthing sleeve Ebs 15.03.19-25 -
bar
straight rebar 03
Ø16 mm
03
Earthing sleeve
90° angled reinforcement bar
01
Earthing sleeve 01
K95 welding bridge
Copper cable 02 02 Ebs 15.03.19-26 -
95 mm2 double-sided Earthing sleeve 03
03
double sided welding bridge
 German Railway,  Austrian Railway

128 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

Earthing connectors
Type Version Product DB 

01
PVC cable coating Ebs 15/03/2017-1
double-sided cable lug
K50
Copper cable 50 mm2
02
Non-halogen cable coating Ebs 15/03/2017-1
double-sided cable lug

01
71 EV
PVC cable coating Ebs 15/03/2017-1
Earthing connector
double-sided cable lug
K70
Copper cable 70 mm2
02
Non-halogen cable coating Ebs 15/03/2017-1
double-sided cable lug

03
K70
VPE cable coating Ebs 15/03/2017-6
CuStAl cable 70 mm2
double-sided cable lug
 German Railway

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 129
 Earthing technology for traffic sector

Earthing sleeve type 71 EB F40

The Earthing sleeve is made of a flat steel with a welded socket

plus a stainless steel washer. In order to protect the entire end
area of the Earthing sleeve against corrosion it is galvanised. With F40.01 M
all Earthing sleeves incl. thread connection the thread is sealed by M
L
a protective sticker.
LH

LH

F40.02

B L
M F40.03
LH

Earthing sleeve type 71 EB F40

Ref.-no. Type M Conductor L B LH
cross-section
[mm2] [mm] [mm] [mm]
400
71ERD16 71 EB F40.01-0400 M16 200 - 53
(standard)
400
71EBF4002-400 71 EB F40.02-0400 M16 200 - 53
(standard)
350
71EBF4003-350 71 EB F40.03-0350 M16 200 110 53
(standard)
Other designs and lengths available on request

PHILIPP Earthing technique in traffic sector For further details of the application and design of Earthing sleeves please refer to
our website www.philipp-group.de.

Product Overview

/ Products / Transport and Mounting Systems / Earthing technology www.philipp-group.de

130 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Earthing sleeve type 71 EB B16

Contrary to the Earthing sleeve with flat steel, the type 71 EB B16
has a reinforcing bar Ø16 as conductor. With this type the socket
B16.01
is crimped on the rebar. The threaded insert consists of a steel
socket with a welded stainless steel washer. With a copper layer, B16.02
which in addition to its good conductivity also serves as additional L
corrosion protection, the threaded socket is provided.
LH
L
M
LH B16.03

L
M
LH
B

Earthing sleeve type 71 EB B16

Ref.-no. Type M Conductor L B LH
cross-section
[mm2] [mm] [mm] [mm]
400
71EBB1601-0400 71 EB-B16.01-0400 M16 201 - 53
(standard)
400
71EBB1602-0400 71 EB B16.02-0400 M16 201 - 53
(standard)
400
71EBB1603-0400 71 EB B16.03-0400 M16 201 min. LH + 70 53
(standard)
Other designs and lengths available on request

PHILIPP Earthing technique in traffic sector For further details of the application and design of Earthing sleeves please refer to
our website www.philipp-group.de.

Product Overview

/ Products / Transport and Mounting Systems / Earthing technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 131
 Earthing technology for traffic sector

Earthing sleeve type 71 EB K95

This Earthing sleeve has a flexible copper cable with a cross sec-
tion of 95 mm² as a conductor. It is available with a crimped-on
threaded insert as well as with a crimped-on welding bridge for K95.01
LS
welding to the reinforcement. Here, the welding bridge is made
K95.02
by pressing a special steel tube. Both, the threaded insert and the L
welding bridge are coated with a copper layer to improve the con-
LH
ductivity and to protect them against corrosion. LH

M L

LH

M LS

LS K95.03

Earthing sleeve type 71 EB K95

Ref.-no. Type M Conductor L LH LS
cross-section
[mm2] [mm] [mm] [mm]
400
71EBK9501-0400 71 EB K95.01-0400 M16 95 53 80
(standard)
400
71EB 95.2-0400 71 EB K95.02-0400 M16 95 53 -
(standard)
400
71EBK9503-0400 71 EB K95.03-0400 - 95 - 80
(standard)
Other designs and lengths available on request

PHILIPP Earthing technique in traffic sector For further details of the application and design of Earthing sleeves please refer to
our website www.philipp-group.de.

Product Overview

/ Products / Transport and Mounting Systems / Earthing technology www.philipp-group.de

132 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP
Earthing connector type 71 EV K50

This Earthing connector consists of a copper cable NYY-O as a

conductor and two tin-plated pressed cable lugs as end-version.
In contrast, the conductor of type 71EVK50.02 consists of a copper
cable N2XH-O with a halogen-free coating.
ØdB

Earthing connector type 71 EV K50

Ref.-no. Type ØdB Conductor cross-section L
[mm] [mm2] [mm]
300
71EVK5001-0300 71 EV K50.01-0300 Ø17 50
(standard)
300
71EVK5002-0300 71 EV K50.02-0300 Ø17 50
(standard)
Other lengths available on request

PHILIPP Earthing technique in traffic sector For further details of the application and design of Earthing connectors please refer
to our website www.philipp-group.de.

Product Overview

/ Products / Transport and Mounting Systems / Earthing technology www.philipp-group.de

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 133
 Earthing technology for traffic sector

Earthing connector type 71 EV K70

The Earthing connector type 71EVK70.02 consists of a copper cable

NYY-O or N2XH-O as a conductor and two tin-plated pressed cable
lugs as end-version. For the Earthing connector type 71EVK70.03
a BayEnergy® - Bahnerdungsleitung of the company Bayerische
ØdB
Kabelwerke AG is used.

Earthing connector type 71 EV K70

Ref.-no. Type ØdB Conductor cross-section L
[mm] [mm2] [mm]
300
71EVK7001-0300 71 EV K70.01-0300 Ø17 70
(standard)
300
71EVK7002-0300 71 EV K70.02-0300 Ø17 70
(standard)
300
71EVK7003-0300 71 EV K70.03-0300 Ø17 70
(standard)
Other lengths available on request

PHILIPP Earthing technique in traffic sector For further details of the application and design of Earthing sleeves please refer to
our website www.philipp-group.de.

Product Overview

/ Products / Transport and Mounting Systems / Earthing technology www.philipp-group.de

134 © 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019
 PHILIPPGROUP

/ Products / Transport and Mounting Systems / Earthing technology

© 2019 PHILIPP GmbH, 63741 Aschaffenburg • Technical changes and errors reserved • November 2019 135
PHILIPPGROUP

Imprint

PHILIPP GmbH
Lilienthalstrasse 7-9
D-63741 Aschaffenburg

Managing Director:
Martin Philipp
Thorsten Philipp
Responsible:
Thorsten Philipp
Companies Register:
Amtsgericht Aschaffenburg
HRB-No.:
896
Ust-IdNo.:
DE 132084295
Our customers trust us to deliver. We do everything in our power to reward their faith
and we start each day intending to do better than the last. We provide strength and
stability in an ever-changing world.

Welcome to the PHILIPP Group

Sustainable
solutions

PHILIPPGROUP

PHILIPP GmbH PHILIPP GmbH PHILIPP GmbH PHILIPP ACON Hydraulic GmbH PHILIPP Vertriebs GmbH
Lilienthalstrasse 7-9 Roßlauer Strasse 70 Sperberweg 37 Hinter dem grünen Jäger 3 Leogangerstraße 21
D-63741 Aschaffenburg D-06869 Coswig/Anhalt D-41468 Neuss D-38836 Dardesheim A-5760 Saalfelden / Salzburg
Phone: + 49 (0) 6021 / 40 27-0 Phone: + 49 (0) 34903 / 6 94-0 Phone: + 49 (0) 2131 / 3 59 18-0 Phone: + 49 (0) 39422 / 95 68-0 Phone + 43 (0) 6582 / 7 04 01
Fax: + 49 (0) 6021 / 40 27-440 Fax: + 49 (0) 34903 / 6 94-20 Fax: + 49 (0) 2131 / 3 59 18-10 Fax: + 49 (0) 39422 / 95 68-29 Fax + 43 (0) 6582 / 7 04 01 20
[email protected] [email protected] [email protected] [email protected] [email protected]