Scribd
Upload
156 views

Analog Component Trainer Kit

The DTK-03B is an analog component trainer on a single board used to educate engineers about active and passive components. It contains resistor, capacitor and inductor banks, voltage regulators, transistors, diodes, a relay, and other components. Students can perform experiments by connecting the components via 2mm banana sockets. The trainer kit comes with a user manual and sample experiment programs.

Uploaded by

Anil Fauzdar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
156 views

Analog Component Trainer Kit

The DTK-03B is an analog component trainer on a single board used to educate engineers about active and passive components. It contains resistor, capacitor and inductor banks, voltage regulators, transistors, diodes, a relay, and other components. Students can perform experiments by connecting the components via 2mm banana sockets. The trainer kit comes with a user manual and sample experiment programs.

Uploaded by

Anil Fauzdar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIGITAL/ANALOG LAB

.....a total solution for Educational Lab Trainers

DTK-03B on 2mm banana sockets


! On board Two Input Switches & Two Output
ANALOG COMPONENT TRAINER
Led Indicator
! Variable potentiometers of 1K, 100K
provided on board
! 20 Pin Vero Socket with output terminated in
2mm Socket
! Fixed DC Power Supply: ±12V.
! Variable DC Power supply of 0 to +15V & 0
to 30V.
! AC Power Supply of 15V-0-15V-
! All interconnections are made using 2mm
socket.
! All ICS are mounted on IC Sockets.
! Bare board Tested Glass Epoxy SMOBC
DTK-03B is a Single Board Trainer Kit which PCB is used.
is widely used to train engineers to ! Attractive ABS Enclosure.
Develop/Study hardware for any Active & ! User’s Manual with sample experimental
Passive components in laboratory. This board programs
having Resistor bank, capacitor bank,
Inductor bank, Regulators, Transistors,
Diodes, Relay etc for experimenting the
active & Passive component techniques. .
Specifications
! Resistor Bank ranging from 10 ohm to 1M
ohm
! Capacitor Bank ranging from 1Kpf - 1micro
farad
! Inductor Bank (10nos)
! Voltage regulators one each IC-7805, 7905
! Transistors one each NPN-BC547,SL100,
PNP-BC558,SK100
! JFET 2N3819, MOSFET BS170, DIAC
DB3, UJT 2N6027, SCR TYN612, TRAIC
BT136
! Diodes 1N 4007 (4 Nos.), Diode 1N4148,
Diode OA79, Zener Diodes 1.2V, 5.1V, 12V
! 12V SPDT Relay with outputs NC, NO &
Common terminated on 2mm banana
sockets
! On board Thermistor, Photodiode & LDR.
! One 8ohm Speaker with outputs on 2mm
banana sockets
! One five mm LED with outputs terminated

Note : Specifications can be altered without notice in our constant efforts for improvement.

Kitek Technologies Pvt. Ltd., B-4, Lotus C.H.S., Plot No. 8, Sector - 7, Airoli, Navi Mumbai - 400708.
Tel.: 65116548 u Telefax : 27694323 u Email: [email protected] u Web : www.kitektechnologies.com

You might also like