TS-9200

Bi-Directional Amplifier

As a Bi-Directional Amplifier (BDA), TS-9200 is used to provide bi-

directional communication between terminal radios and the base
station in order to fit in any kind of environment. It can be used
outdoors to extend the coverage range of base station, making
communication services available in areas with no or weak signals.
Additionally, it can be used indoors as the signal source to improve
signal strength. With a multi-channel selecting unit, TS-9200 BDA
can selectively amplify the signals, ensuring the frequency purity of
repeated signals and the stability of output power. It has excellent
compatibility and is now widely used in trunking communication
systems such as TETRA, iDEN, MPT-1327, LTR, APCO25 as well as
conventional communication system.

BDA Type:
Integrated RF BDA
Fiber Optical BDA（Coupling by air）
Fiber Optical BDA（Coupling directly）
Product Highlights

● With modularized design, easy for maintenance;

● Software remote monitoring (GSM、Ethernet(SNMP) 、
serial port), easy for maintenance and management.
● SDR (Software Defination Radio) Technology, filtering

irrelative and ensuring stable output power & clean spectrum

output.
● Function of Channel Switch. With this functions, the channel

will automatically be shut down if there is no call in the

coverage, which can strongly reduce the impact of base
stations.
Fiber optical BDA(Coupling by air)
● Dustproof, moistureproof & waterproof, with low

requirements on installation environment;

● With high-linearity power amplifier and high-rejection

duplexer, capable of rejecting intermodulation and spurious

signals;
Application Examples

lCoverage Solution for Tunnels Typical Solution Of BDA

Signals are strongly shielded in long and narrow tunnels due This is a typical case of integrated solution of BDA. The
to barriers such as mountains. As a result, there is almost no system uses BDA and repeater to build a radio network to
signal except the entrance and exit. BDA would throw this
cover both the inside and outside of these buildings.
problem away.
lCoverage Solution for Roads and Railways
Install BDAs between base stations of trunking system along
highways, railways or rivers, and users will enjoy the following
benefits: coverage range extension of trunking system; the
reduction of base station number and frequency resource
occupation; significant cut of system construction cost and
winning of a cost-effective zonal coverage solution with high
performance.
lCoverage Solution for Indoor Areas
Most trunking systems adopt the large coverage system. As a
result, the signals are weak when getting to the indoor area
due to the attenuation such as space loss and penetration
loss. This is why signal blind areas or poor communication
quality occur in the lower floors, basements, Mine and Dubai Intercom Hotel Dubai Intercom Hotel Coverage Project
elevators of high-rise buildings. In these cases, BDA is the
best solution thanks to its ability to improve signal strength
and ensure communication quality.
lCoverage Solution for Outskirts Areas
In suburbs and remote town areas, BDA is the best coverage
solution, not only for its affordability and easy installation, but
also for its functions (equal to a small base station).
lCoverage Solution for Congested Residential Areas
In congested residential areas, buildings vary in height and
the space size between two buildings is small with complex
electromagnetic environment. This may cause the signal to
attenuate quickly. Therefore, low coverage rate and poor
communication quality result. Luckily, these problems can be
eliminated by using BDAs.

Integrated RF BDA

Fiber Optical BDA(Coupling directly)

Specification
Integrated RF BDA
TS-9200
Frequency Range VHF,350-470MHz,800MHz
Protection IP55
Weight 35kg
Dimension (L x W x H） 705x400x202mm
Power Supply AC180～260V（45～55Hz）/DC-40～-55V
Connector Type N-connector (female)
Monitoring Mode GSM、Ethernet(SNMP)、RS232
Environment Humidity ≤ 95% RH
Operating Temperature -30℃～+60℃
Input\Output Impedance 50Ω
Noise Factor ≤5dB
Signal Delay ≤ 35us (Channel-selective) ≤ 5us (Band-selective)
Power Consumption <300W

Downlink Uplink
IP3 62dBm IP3 62dBm
Gain 90dB Gain 90dB
Input Level -80 ～ -45dBm Input Level -105～ -60dBm
Output Power 40dBm（10W） Output Power 33dBm（2W）

Fiber optical BDA（Coupling by air）

Frequency Range VHF: 350-470MHz,800MHz
Protection IP55
Weight 25kg/25kg
Dimension (L x W x H） 460x400x202mm / 460x400x202mm
Power Supply　 AC180～260V（45～55Hz）/DC-40～-55V
Connector Type N-connector (female)
Monitoring Mode GSM、Ethernet(SNMP)、RS232
Environment Humidity ≤ 95% RH
Operating Temperature -30℃～+60℃
Input\Output Impedance 50Ω
Noise Factor ≤5dB
Signal Delay ≤ 35us (Channel-selective) ≤ 5us (Band-selective)
Power Consumption <100W / <100W

Downlink Uplink
IP3 62dBm IP3 62dBm
Gain 110dB Gain 110dB
Input Level -80 ～ -45dBm Input Level -110 ～ -70dBm
Output Power 37dBm（5W） Output Power 30dBm（1W）

If you want to know the other BDA type specification, please contact the local dealers.

Hytera Communications Corporation Limited

Address: Hytera Tower, Hi-Tech Industrial Park North,Beihuan Rd.,
Nanshan District,Shenzhen,China
Tel: +86-755-2697 2999 Fax: +86-755-8613 7139 Post: 518057
Http: //www.hytera.com

Hytera retains right to change the product design and specification. Should any printing mistake occur,
EN20140109A

Hytera doesn't bear relevant responsibility. Little difference between real product and product indicated
by printing materials will occur by printing reason.

, are registered trademarks of Hytera Co., Ltd.

2014 Hytera Co., Ltd. All Rights Reserved.