Scribd
Upload
102 views

Demo-Oral Questioning

The candidate, Ace De Juan, demonstrated maintenance and repair of computer systems and networks and was assessed using a demonstration checklist and oral questioning. During the demonstration, Ace followed safety precautions, inspected systems thoroughly, and prepared a report according to company requirements. In the oral questioning, Ace showed satisfactory understanding by correctly answering questions about computer systems, safety procedures, contingency plans, job roles, and how to properly dispose of computer parts. Overall, Ace's performance was assessed as competent.

Uploaded by

Junz A. Aducal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
102 views

Demo-Oral Questioning

The candidate, Ace De Juan, demonstrated maintenance and repair of computer systems and networks and was assessed using a demonstration checklist and oral questioning. During the demonstration, Ace followed safety precautions, inspected systems thoroughly, and prepared a report according to company requirements. In the oral questioning, Ace showed satisfactory understanding by correctly answering questions about computer systems, safety procedures, contingency plans, job roles, and how to properly dispose of computer parts. Overall, Ace's performance was assessed as competent.

Uploaded by

Junz A. Aducal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

DEMONSTRATION WITH ORAL QUESTIONING

Candidates Name: Ace De Juan


Assessor Name: Junmar A. Caldeo
Unit of Competency: Maintain and Repair Computer Systems and
Networks
Competency Standards: Computer Hardware Servicing NC II
Date of Assessments: February 13 2015
Time of Assessments: 1:00 – 3:00 P.M.
Instructions for
demonstration:
General Instruction:
Given the necessary tools, materials and equipment, you are required to
inspect, test/check computer system and network in accordance with
institutional/industry standard. (Allotted time: 2hrs.)

Specific Instruction:

1. Gather necessary tools, supplies and equipment.


2. Check that you are properly grounded before touching any component of the
computer. (Wearing of rubber soled shoes etc.)
3. Apply safety precaution before plugging in the computer. (No wet hands,
work bench is clean and clear from other items etc.).
4. You will be rated using the demonstration checklist.
5. Oral interview will be conducted after the demonstration
6. Written test will also be given to check your competence.
7. If you are ready you could start the demonstration now.

Materials and equipment (insert details of materials and equipment needed for the
demonstration)

Tools: Equipment: Testing Devices: Materials:


 Slotted head  Working PC  Multi-tester/  Lan Cable
screwdriver  Printer Multimeter  Inspection
 Philips head  Server  Lan Tester Report Template
screwdriver
 Long nosed
pliers
 Allen bit wrench
OBSERVATION Place check () to
show if evidence is
demonstrated
During the demonstration of skills, did the candidates: Yes No N/A
1. Inspects are undertaken to ensure that the testing
conducted on the device conforms with the
manufacturer’s instruction/manual
2. Checks computer systems and networks to ensure safe
operation.
3. Follow OHS standards and 5s principles according to
enterprise policies.
4. Cleans and clears work site of all debris and left in safe
condition in accordance with company procedures.
5. Dispose excess components and materials base on WEEE
directives and 3R’s waste management program.
6. Prepares and completes report according to company
requirements.
ORAL QUESTIONS
Questions to probe the candidate’s underpinning knowledge Satisfactory
Response
Yes No
Extension/Reflection Question
1. What is a Computer System? 
2. Example of Computer System errors 
Safety Questions
3. When removing or uninstalling devices from the
motherboard of PC unit is it right to hold the IC’s and place 
it without rubber mat? Why?
4. What is the purpose of Wrist wrap? 
Contingency Questions
5. What shall you do before reinstalling the operating system of 
PC unit?
6. In case of power loss what shall you do? 
Infrequent Questions
7. As a good service technician someday how would you deal 
with people who need for your service?
8. How do you dispose old and busted part of Computer 
System?
Job Roles Questions
9. Before doing the inspection and testing of computer what 
are the things need to consider?
10. After testing the PC what will you do next? 
The candidate underpinning knowledge was:

Satisfactory  Not Satisfactory


Feedback to candidates
Competent
The candidate’s over-all performance was

Satisfactory Not Satisfactory
Candidate signature: Date: February 13, 2015
Assessor signature: Date: February 13, 2015
MODEL ANSWERS

Extension/reflection questions
1. Computer System – is the complete computer made up of the
CPU, Memory and related electronics, all the peripheral devices
connected to it and operating system.

2. No display, No power, System Hang ups, Boot Failure, virus


infections, etc..
Safety questions
3. No, to prevent any damage due to ESD.

4. To prevent accidental grounding and to avoid damaging


components due to ESD.
Contingency Questions
5. Backup all data first.

6. Turn off the Automatic Voltage Regulator and make sure all
power cords are unplug from the wall socket.
Infrequent Questions
7. Nicely, friendly and in professional way.

8. Trade it when you buy a new computer or pay for a profit


recycling firm to have your PC taken of your hands and recycled
responsibly, but don’t throw that computer into the trash.
Computers are not biodegradable, and your contribution of an
unwanted PC will seriously damage the environment.
Job Roles Questions
9. Ensure Safety precaution.

10. Record the conditions of the components and make a


document report.

You might also like