0% found this document useful (0 votes)
185 views

ATMS Open Foundation

The document shows engineering drawings of a foundation design. It includes a plan view and cross-sectional views detailing reinforcement bars and concrete dimensions. The foundation will support a gantry and consists of a base concrete slab reinforced with steel bars overlaid by 25mm of flooring. It is anchored to the ground with embedded bolts. Reinforcing bars of various diameters are arranged in both directions within the concrete sections. Dimensions and notes provide specifications for materials, concrete mixes, cover depths, and construction details.

Uploaded by

abc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
185 views

ATMS Open Foundation

The document shows engineering drawings of a foundation design. It includes a plan view and cross-sectional views detailing reinforcement bars and concrete dimensions. The foundation will support a gantry and consists of a base concrete slab reinforced with steel bars overlaid by 25mm of flooring. It is anchored to the ground with embedded bolts. Reinforcing bars of various diameters are arranged in both directions within the concrete sections. Dimensions and notes provide specifications for materials, concrete mixes, cover depths, and construction details.

Uploaded by

abc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

300

25 MM FLOORING OVER 75 MM ANCHOR BOLTS


BASE CONC.
300 1200 300 1200
10 50
150 GL GL 80
80
16 MM Ø BARS 6 NOS. 16 MM Ø BARS 9 NOS. EACH 4800 1200 1800 50
X' X1
EACH INNER FACE OUTER FACE
8 MM TIES @ 300 MM C/C
1140 A1 SAND FILLING A1
's' 300
12 MM Ø BAR 32 NOS. EACH WAYS 40 110 80 80 50
12 MM Ø BAR 19 NOS.
EACH WAYS
1800
310
150
300 300 300 300
4800 DETAILS AT ''S''
50 MM CONC. COVER
(SHOWING POSITION OF ANCHOR BOLTS)
75
C:C 1:4:8 WITH 40 MM STONE
BALLAST
PLAN
4800 (ATMS TYPE GANTRY FDN.)
SECTION AT X' - X1
12 MM Ø BARS 32 NOS. EACH WAYS
12 MM Ø BARS 19 NOS. EACH WAYS 8 MM TIES @ 300 MM C/C
16 MM Ø BARS 9 NOS. (EACH OUTER FACE)
16 MM Ø BARS 6 NOS. EACH INNER FACE
300 40MM CONC. COVER
NOTES-
1:-ALL DIMENSIONS ARE IN MM.
1200 2:-FIGURED DIMENSIONS TO BE FOLLOWED.
4800 4800
3:-MEDIUM STRENGTH RIBBED TOR BARS CONFORMING TO I:S:
1786 SHALL BE USED IN FRUSTUM AND CHIMNEY.
4:-CONCRETE IN FRUSTUM AND CHIMNEY SHALL BE (1:1.5:3)
5:-CLEAR CONC.COVER IN CHIMNEY AND FRUSTUM SHALL BE 40
MM AND 50 MM RESPECTIVELY.
300 40MM CONC. COVER
6:-ANCHOR BOLTS SHALL BE GROUTED DURING CASTING ITSELF.
300 1200 300
7:-MIN.EXCAVATION SHALL BE1.00 M FROM NGL
8:-PCC SHALL BE IN 1:4:8 IN STONE BALLAST
4800 4800
SECTION AT A1 - A1 PROJECT:- 132 /33 KV SUBSTATION,RANIGANJ,PRATAPGARH
BOTTOM REINFORCEMENT TOP REINFORCEMENT
CLIENT: UTTAR PRADESH POWER TRANSMISSION CORPORATION LTD.
CONTRACTOR:
PRIME
GROUP
TITLE- OPEN TYPE FOUNDATION FOR DRY SOIL FOR GANTRY ATMS
SUB DIVISION OFFICER EXECUTIVE ENGINEER
(UPPTCL) (UPPTCL)
DATE REV. SHT.
DRG.NO: 01/UPPTCL/RANIGANJ/PRATAPGARH
......... 00 00

You might also like