Scribd
Upload
104 views

CIT 3202 Network Design and Management

This document contains instructions for a 2-hour exam with 5 questions on the topic of network design and management. Question 1 is compulsory and covers topics like computer networks, attenuation, routing, network interface cards, network design issues, logical network subdivisions, collision domains, communication rules, token passing, and CSMA/CD media access methods. It also asks about logical vs physical addressing and the challenges of network design/management jobs. Questions 2-5 cover additional topics like bandwidth vs throughput, loopback testing, network interface cards, network implementation tools, network design data collection methods, security strategies, switch usage, cabling, IP addressing, and examining the OSI model layers and network troubleshooting.

Uploaded by

Hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views

CIT 3202 Network Design and Management

This document contains instructions for a 2-hour exam with 5 questions on the topic of network design and management. Question 1 is compulsory and covers topics like computer networks, attenuation, routing, network interface cards, network design issues, logical network subdivisions, collision domains, communication rules, token passing, and CSMA/CD media access methods. It also asks about logical vs physical addressing and the challenges of network design/management jobs. Questions 2-5 cover additional topics like bandwidth vs throughput, loopback testing, network interface cards, network implementation tools, network design data collection methods, security strategies, switch usage, cabling, IP addressing, and examining the OSI model layers and network troubleshooting.

Uploaded by

Hussein
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CIT 3202: NETWORK DESIGN AND MANAGEMENT

TIME: 2HRS
INSTRUCTION: ATTEMPT QUESTION ONE AND ANY OTHER TWO QUESTIONS

QUESTIONS ONE (COMPULSORY)-30 MARKS


a) Explain each of the following (8 Marks)
i. Computer Network
ii. Attenuation
iii. Routing
iv. NIC
b) Briefly explain any two key design issues that a network designer should take into consideration when
designing an organization network (4 Marks)
c) State a name for each of the following
i) Logical subdivision of a network? (2 Marks)
ii) Region within which any two or more devices transmitting at the same time collide
(2 Marks)
iii) Rules governing communication between two devices (2 Marks)
d) Describe the following media access methods
i) Token passing (2 Marks)
ii) CSMA/CD (2 Marks)
e) Network design and management is an interesting and time consuming job but often considered as
the most difficult job in IT. Discuss why? (4 Marks)
f) Explain the difference between logical and physical addressing and give an example in each case
(4 Marks)
Question Two-20 Marks
a) Meru University network administrator tabulated bandwidth and throughput and observed the value
of bandwidth was constant while throughput was varying. Differentiate between bandwidth from
throughput and briefly explain the observation (4 Marks)
b) Explain how to test a loop back connection (2 Marks)
c) Explain the following terms in reference to Network Interface Card
i. Physical address is hard coded (2 Marks)
ii. Ethernet NIC (2 Marks)
iii. Wireless NIC (2 Marks)

iv. Describe the process of terminating a straight through cable (8 Marks)


Question Three-20 Marks
a) Describe the role of each of the following tools during either design or implementation of a network
project (8 Marks)
i. TDR
ii. Crimping tool
iii. Voltmeter
iv. LAN tester
b) Identify and explain two methods that can be used to collect data for a network design project
(6 Marks)
c) Describe any three network security strategies (6 Marks)

Question Four-20 Marks


a) Explain why a switch is used to replace a hub in modern networks (4 Marks)
b) Identify the cable used for connecting PC to Switch (2 Marks)

c) The following information has been extracted from MUST network user guide
Accounts Department Sub-network devices IP range-192.168.2.241-192.168.2.246
i. Convert the last octet in above into binary number (4 Marks)
ii. Determine the subnet mask(show working) (4 Marks)
d) Identify the three classes used for public IP address and give an example in each case (6 Marks)

Question Five-20 Marks


a) State the layer and explain a design or implementation issue related to any four of the OSI reference
model (12 Marks)
b) Explain how the following would be accomplished and show the expected output (8 Marks)
i) Retrieve both MAC address and IP address of a computer
ii) Establish the path data has taken from source to destination

You might also like