Bulletin PD-2.307 rev.

C 10/06

40CPQ035
40CPQ040
40CPQ045
SCHOTTKY RECTIFIER 40 Amp

IF(AV) = 40Amp
VR = 30/ 45V

Major Ratings and Characteristics Description/ Features

The 40CPQ... center tap Schottky rectifier has been optimized
Characteristics Values Units for very low forward voltage drop, with moderate leakage. The
proprietary barrier technology allows for reliable operation up
IF(AV) Rectangular 40 A to 150° C junction temperature. Typical applications are in
waveform switching power supplies, converters, free-wheeling diodes,
and reverse battery protection.
VRRM 35/ 45 V
150° C TJ operation
IFSM @ tp = 5 μs sine 3500 A Center tap TO-247 package
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
VF @ 20 Apk, T J=125°C 0.43 V
Very low forward voltage drop
(per leg)
High frequency operation
TJ - 55 to 150 °C Guard ring for enhanced ruggedness and long term
reliability

Case Styles

Base
Common
Cathode
2

1 3
Anode Anode
2
1 2
Common
Cathode
TO-247AC

Document Number: 93336 www.vishay.com

1
40CPQ035, 40CPQ040, 40CPQ045
Bulletin PD-2.307 rev. C 10/06

Voltage Ratings
Part number 40CPQ035 40CPQ040 40CPQ045
VR Max. DC Reverse Voltage (V)
35 40 45
VRWM Max. Working Peak Reverse Voltage (V)

Absolute Maximum Ratings

Parameters 40CPQ... Units Conditions
IF(AV) Max. Average Forward Current 40 A 50% duty cycle @ TC = 120 °C, rectangular wave form
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive 3500 5μs Sine or 3μs Rect. pulse Following any rated
A load condition and with
Surge Current (Per Leg) * See Fig. 7 430 10ms Sine or 6ms Rect. pulse rated VRRM applied
EAS Non-RepetitiveAvalancheEnergy 27 mJ TJ = 25 °C, IAS = 4 Amps, L = 3.4 mH
(Per Leg)
IAR RepetitiveAvalancheCurrent 4 A Current decaying linearly to zero in 1 μsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical

Electrical Specifications
Parameters 40CPQ... Units Conditions
VFM Max. Forward Voltage Drop 0.49 V @ 20A
TJ = 25 °C
(Per Leg) * See Fig. 1 (1) 0.59 V @ 40A
0.43 V @ 20A
TJ = 125 °C
0.56 V @ 40A
IRM Max. Reverse Leakage Current 4 mA TJ = 25 °C
VR = rated VR
(Per Leg) * See Fig. 2 (1) 150 mA TJ = 125 °C
CT Max. Junction Capacitance (Per Leg) 1850 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated VR)
(1) Pulse Width < 300μs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters 40CPQ... Units Conditions
TJ Max. Junction Temperature Range -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJC Max. Thermal Resistance Junction 1.25 °C/W DC operation * See Fig. 4
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction 0.63 °C/W DC operation
to Case (Per Package)
RthCS Typical Thermal Resistance, Case 0.24 °C/W Mounting surface , smooth and greased
to Heatsink
wt Approximate Weight 6 (0.21) g (oz.)
T Mounting Torque Min. 6 (5) Kg-cm Non-lubricated threads
Max. 12 (10) (Ibf-in)
Case Style TO-247AC(TO-3P) JEDEC
Device Marking 40CPQ035
40CPQ040
40CPQ045

Document Number: 93336 www.vishay.com

2
 40CPQ035, 40CPQ040, 40CPQ045
Bulletin PD-2.307 rev. C 10/06

1000 1000
T =150°C
J
100
125°C

ReverseCurrent - I (mA)
10 100°C

R
75°C
1

100 50°C
.1
25°C
InstantaneousForwardCurrent - I (A)

.01
F

.001
0 5 10 15 20 25 30 35 40 45
ReverseVoltage- VR(V)
10
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage (Per Leg)
T =150°C
J 10000
T =125°C
J
JunctionCapacitance- C (pF)

T = 25°C
J T =25°C
T

1
1000

.1 100
0 .2 .4 .6 .8 1 1.2 1.4 0 10 20 30 40 50
ForwardVoltageDrop- V (V)
FM
ReverseVoltage- VR(V)
Fig. 1 - Max. Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance
(Per Leg) Vs. Reverse Voltage (Per Leg)
10
Thermal Impedance- ZthJC (°C/W)

1 D=0.50
D=0.33
D=0.25 P
DM
D=0.17
.1 t
D=0.08 1
t
2
Notes:
.01 1. Dutyfactor D= t1/ t2
SinglePulse
(Thermal Resistance) 2. PeakT =P xZ +T
J DM thJC C
.001
.00001 .0001 .001 .01 .1 1 10 100
t , Rectangular PulseDuration(Seconds)
1
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg)

Document Number: 93336 www.vishay.com

3
40CPQ035, 40CPQ040, 40CPQ045
Bulletin PD-2.307 rev. C 10/06

155 14
D=0.08
AllowableCaseTemperature- (°C)

RthJC (DC) =1.25°C/W 12 D=0.17

D=0.25

atts)
150
D=0.33

AveragePower Loss- (W
10
D=0.50
145
8
RMSLimit
6 DC
140 DC

4
135
2

130 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
AverageForwardCurrent - I (A) AverageForwardCurrent - I (A)
F(AV) F(AV)
Fig. 5 - Max. Allowable Case Temperature Fig. 6 - Forward Power Loss Characteristics
Vs. Average Forward Current (Per Leg) (Per Leg)

10000
(A)
FSM
Non-Repetitive Surge Current - I

1000

At Any Rated Load Condition

And With Rated VRRM Applied
Following Surge

100
10 100 1000 10000
Square Wave Pulse Duration - t p (microsec)
Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg)

HIGH-SPEED
DUT IRFP460 SWITCH

FREE-WHEEL
Rg = 25 ohm Vd = 25 Volt
DIODE +

CURRENT 40HFL40S02
MONITOR

Fig. 8 - Unclamped Inductive Test Circuit

Document Number: 93336 www.vishay.com

4
 40CPQ035, 40CPQ040, 40CPQ045
Bulletin PD-2.307 rev. C 10/06

Outline Table

Conform to JEDEC outline TO-247AC (TO-3P)

Dimensions in millimeters and (inches)

Marking Information

PART NUMBER
THIS IS A 40CPQ045 INTERNATIONAL
RECTIFIER 40CPQ045
WITH LOT CODE 58 07
LOGO 035H
ASSEMBLED ON WW 35, 2000
58 07
IN THE ASSEMBLY LINE "H" DATE CODE
ASSEMBLY
YEAR 0 = 2000
LOT CODE
WEEK 35
LINE H

Document Number: 93336 www.vishay.com

5
40CPQ035, 40CPQ040, 40CPQ045
Bulletin PD-2.307 rev. C 10/06

Ordering Information Table

Device Code
40 C P Q 045 -

1 2 3 4 5 6

1 - Current Rating (40 = 40A)

2 - Circuit Configuration
C = Common Cathode
3 - Package
P = TO-247
4 - Schottky "Q" Series 035 = 35V
5 - Voltage Code 040 = 40V

6 - y none = Standard Production 045 = 45V

y PbF = Lead-Free

Tube Standard Pack Quantity : 25 pieces

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
10/06

Document Number: 93336 www.vishay.com

6
 Legal Disclaimer Notice
Vishay

Notice

The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of
International Rectifier’s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the
products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below.

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or
anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.

International Rectifier®, IR®, the IR logo, HEXFET®, HEXSense®, HEXDIP®, DOL®, INTERO®, and POWIRTRAIN®
are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product
names noted herein may be trademarks of their respective owners.

Document Number: 99901 www.vishay.com

Revision: 12-Mar-07 1