Scribd
Upload
118 views

Subnet Mask

The document discusses subnet masks and IP addressing. It defines subnet masks as splitting IP addresses into network and host addresses. It also explains how subnet masks are used to create subnets and enable subnetting to logically partition networks. Different classes of IP addresses (A, B, C) have default subnet masks that determine how many bits are used for the network portion.

Uploaded by

Surya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
118 views

Subnet Mask

The document discusses subnet masks and IP addressing. It defines subnet masks as splitting IP addresses into network and host addresses. It also explains how subnet masks are used to create subnets and enable subnetting to logically partition networks. Different classes of IP addresses (A, B, C) have default subnet masks that determine how many bits are used for the network portion.

Uploaded by

Surya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

CCNA VOICE

Subnet Mask
<< Back to Technical Glossary

Subnet Mask Definition


Every device has an IP address with two pieces: the client or host address and the server or network address. IP addresses
are either configured by a DHCP server or manually configured (static IP addresses). The subnet mask splits the IP
address into the host and network addresses, thereby defining which part of the IP address belongs to the device and
which part belongs to the network.

The device called a gateway or default gateway connects local devices to other networks. This means that when a local
device wants to send information to a device at an IP address on another network, it first sends its packets to the gateway,
which then forwards the data on to its destination outside of the local network.

1
CCNA VOICE

What is Subnet Mask?


A subnet mask is a 32-bit number created by setting host bits to all 0s and setting network bits to all 1s. In this way, the
subnet mask separates the IP address into the network and host addresses.

The “255” address is always assigned to a broadcast address, and the “0” address is always assigned to a network
address. Neither can be assigned to hosts, as they are reserved for these special purposes.

The IP address, subnet mask and gateway or router comprise an underlying structure—the Internet Protocol—that most
networks use to facilitate inter-device communication.

When organizations need additional subnetworking, subnetting divides the host element of the IP address further into a
subnet. The goal of subnet masks are simply to enable the subnetting process. The phrase “mask” is applied because the
subnet mask essentially uses its own 32-bit number to mask the IP address.

IP Address and Subnet Mask


A 32-bit IP address uniquely identifies a single device on an IP network. The 32 binary bits are divided into the host and
network sections by the subnet mask but they are also broken into four 8-bit octets.

Because binary is challenging, we convert each octet so they are expressed in dot decimal. This results in the
characteristic dotted decimal format for IP addresses—for example, 172.16.254.1. The range of values in decimal is 0 to
255 because that represents 00000000 to 11111111 in binary.

IP Address Classes and Subnet Masks


Since the internet must accommodate networks of all sizes, an addressing scheme for a range of networks exists based on
how the octets in an IP address are broken down. You can determine based on the three high-order or left-most bits in
any given IP address which of the five different classes of networks, A to E, the address falls within.

(Class D networks are reserved for multicasting, and Class E networks not used on the internet because they are reserved
for research by the Internet Engineering Task Force IETF.)

2
CCNA VOICE
A Class A subnet mask reflects the network portion in the first octet and leaves octets 2, 3, and 4 for the network
manager to divide into hosts and subnets as needed. Class A is for networks with more than 65,536 hosts.

A Class B subnet mask claims the first two octets for the network, leaving the remaining part of the address, the 16 bits
of octets 3 and 4, for the subnet and host part. Class B is for networks with 256 to 65,534 hosts.

In a Class C subnet mask, the network portion is the first three octets with the hosts and subnets in just the remaining 8
bits of octet 4. Class C is for smaller networks with fewer than 254 hosts.

Class A, B, and C networks have natural masks, or default subnet masks:

 Class A: 255.0.0.0
 Class B: 255.255.0.0

 Class C: 255.255.255.0

You can determine the number and type of IP addresses any given local network requires based on its default subnet
mask.

An example of Class A IP address and subnet mask would be the Class A default submask of 255.0.0.0 and an IP address
of 10.20.12.2.

How Does Subnetting Work?


Subnetting is the technique for logically partitioning a single physical network into multiple smaller sub-networks or
subnets.

Subnetting enables an organization to conceal network complexity and reduce network traffic by adding subnets without
a new network number. When a single network number must be used across many segments of a local area network
(LAN), subnetting is essential.

The benefits of subnetting include:

 Reducing broadcast volume and thus network traffic


 Enabling work from home
 Allowing organizations to surpass LAN constraints such as maximum number of hosts

Network Addressing
3
CCNA VOICE
The standard modern network prefix, used for both IPv6 and IPv4, is Classless Inter-Domain Routing (CIDR) notation.
IPv4 addresses represented in CIDR notation are called network masks, and they specify the number of bits in the prefix
to the address after a forward slash (/) separator. This is the sole standards-based format in IPv6 to denote routing or
network prefixes.

To assign an IP address to a network interface since the advent of CIDR, there are two parameters: a subnet mask and the
address. Subnetting increases routing complexity, because there must be a separate entry in each connected router’s
tables to represent each locally connected subnet.

What Is a Subnet Mask Calculator?


Some know how to calculate subnet masks by hand, but most use subnet mask calculators. There are several types of
network subnet calculators. Some cover a wider range of functions and have greater scope, while others have specific
utilities. These tools may provide information such as IP range, IP address, subnet mask, and network address.

Here are some of the most common varieties of IP subnet mask calculator:

 A IPv6 IP Subnet Calculator maps hierarchical subnets.


 An IPv4/IPv6 Calculator/Converter is an IP mask calculator that supports IPv6 alternative and condensed formats. This
network subnet calculator may also allow you to convert IP numbers from IPv4 to IPv6.
 An IPv4 CIDR Calculator is a subnet mask adjustment and Hex conversion tool.

 An IPv4 Wildcard Calculator reveals which portions of an IP address are available for examination by calculating the IP
address wildcard mask.

 Use a HEX Subnet Calculator to calculate the first and last subnet addresses, including the hexadecimal notations of
multicast addresses.

 A simple IP Subnet Mask Calculator determines the smallest available corresponding subnet and subnet mask.
 A Subnet Range/Address Range Calculator provides start and end addresses.

What Does IP Mask Mean?


Typically, although the phrase “subnet mask” is preferred, you might use “IP/Mask” as a shorthand to define both the IP
address and submask at once. In this situation, the IP address is followed by the number of bits in the mask. For example:

10.0.1.1/24

4
CCNA VOICE
216.202.192.66/22

These are equivalent to

IP address: 10.0.1.1 with subnet mask of 255.255.255.0

IP address: 216.202.196.66 with a subnet mask example of 255.255.252.0

However, you do not mask the IP address, you mask the subnet.

You might also like