Hot-Air Hand Tools

Hot-Air Hand Tools

Product overview 10 / 11
TRIAC ST 12 – 15
TRIAC AT 13 – 15
ELECTRON ST 16 / 17
HOT JET S 18 / 19
GHIBLI AW 20 / 21
GHIBLI 23
HOTWIND PREMIUM / SYSTEM 24
FORTE S3 25
AIRSTREAM ST 26 / 27
ROBUST 28
WELDING PEN R / WELDING PEN S 29
DIODE PID / DIODE S 30 / 31
MINOR 31
TRIAC ST for use in the roughest of environments. LABOR S 32
General accessories 34
Welding rod 35

HOT JET S ideal for detail work on the roof.

DIODE S for use with draw welding on tank details.

9
Product overview Hot-air hand tools

Type TRIAC ST TRIAC AT ELECTRON ST HOT JET S GHIBLI AW GHIBLI HOTWIND FORTE S3

3 × 230 /
Voltage V~ 120 120 120 / 230 120 120 / 230 120 / 230 120
3 × 400
Max. power W 1600 1600 2400 / 3400 460 1800 / 2300 1500 2300 10 000
Temperature °F 104 – 1292 104 – 1148 104 – 1202 68 – 1112 149 – 1148 68 – 1112 68 – 1202 68 – 1202
Size in inches (L × ) 13 × 4 13 × 4 13 × 4 9×3 11 × 9 × 4 8 ×3×6 13 × 4 15 × 5
Handle ( ) 2 2 2 1.6 2 2 7 8

Weight lbs (without cord)~ 2 2 2 1.3 3 2 5 10

Integrated blower
Digital display
Conformity mark
Approval mark
Protection class
Applications
Outdoor use
Indoor use
Roofing
Billboards / Tarpaulins
Civil engineering /
Tunneling / Landfills

Plastic fabrication

Flooring / Interior design

Shrinking
Catalog page 12 – 15 13 – 15 16 / 17 18 / 19 20 / 21 23 24 25

10 www.leister.com
 Hot-Air Hand Tools
Product overview Hot-air hand tools and Blowers

WELDING DIODE
Type AIRSTREAM ST ROBUST MINOR LABOR S
PEN R / S PID / S
3 × 230 /
Voltage V~ 230 120 120 230 120
3 × 400
Max. power W 215 250 600 1600 100 600 / 700
Temperature °F 68 – 1112 68 – 1112 68 – 1112
Size in inches (L × ) 24 × 10 × 14 9×9 11 × 1 10 × 2 9 ×4 7×2
Handle ( ) 1.3 1.6 2.5 1.3

Weight lbs (without cord)~ 53 18 2 3 2.5 0.33

Integrated blower
Digital display (R) (PID)
Conformity mark
Protection class
Applications
Outdoor use
Indoor use
Roofing
Billboards / Tarpaulins
Civil engineering /
Tunneling / Landfills

Plastic fabrication

Flooring / Interior design

Shrinking
Catalog page 26 / 27 28 29 30 / 31 31 32

11
TRIAC ST – Design meets experience

The TRIAC ST is primarily used for welding and plastic fabrication. During its development, a deliberate choice was
made to do without extra technical features. Instead it is distinguished by its robust design, reliability, versatility, and
user-friendly features, like its predecessor the TRIAC S. A prominent feature is the two-component handle, which is
not only attractive, but also gives the user perfect grip. The low weight—of less than one kilogram (2.2 lbs)—ensures
perfect weight balance.

Product advantage
1 Ergonomic handling:
The two-component handle and per-
fect tool balance ensure ideal grip and
optimum working even under the
toughest conditions.

Perfect weight:
Weighing less than 2.2 lbs, the
TRIAC ST is even lighter than its 1
predecessor.

2 Always keeps a cool head:

There is an actively cooled protective
tube for greater work safety.

3 Welding power:
Thanks to the optimized,
highly robust motor, TRIAC ST
guarantees high welding power. 3

4 Reliability:
A new temperature manager and a
high dust resistance provide the heat-
ing elements with a long service life.

5 Swiss thoroughness:
The air filters, located on either side,
easily can be removed and cleaned.
This ensures optimum air flow and
maximum power output.

Optimum protection:
The filters offer active protection
against moisture and dust.

12 www.leister.com
TRIAC AT: Robust and intelligent.

Hot-Air Hand Tools

The TRIAC AT is an intelligent hot-air hand tool—for welding and shrinking plastics—that is suitable for on-site use. It
is designed for the needs of even the most demanding professional. Every tool undergoes stringent quality checks
prior to leaving the factory in Switzerland. This high-quality hot-air hand tool is equipped for all situations. Its univer-
sal areas of application are virtually unlimited. The TRIAC AT will continue to prove its merit in any weather condition
and is just as effective outside as it is indoors – all during continuous operation.

Hot-air hand tool Hot-air hand tool

TRIAC ST TRIAC AT

version for
screw-on nozzle

• Suitable for the work site • Suitable for the work site
• Functional design: two-component handle grip and • Closed-loop controlled temperature
optimum center of gravity ensure good ergonomics • Open loop controlled air volume
• Quick clean air filters • Intelligent “e-Drive” operating unit
• Automatic carbon stop and heating element protection • Ergonomic handling
provide automatic protective measures • Modern design

Technical data Technical data

Voltage V~ 120 Voltage V~ 120
Frequency Hz 50 / 60 Frequency Hz 50 / 60
Power W 1600 Power W 1600
Temperature °F 104 – 1292 Temperature °F 104 – 1148
Air volume (68°F) cfm 9.9 (17.7 cfm at max. temp) Air volume (68°F) cfm 7.4 - 9.9 (17.7 cfm at max. temp)
Dynamic pressure Pa 3000 Dynamic pressure Pa 1600 - 3000
Nozzle holder inch 1.24 Nozzle holder inch 1.24
Emission dB(A) 67 Emission dB(A) 67
Size (L × ) inches 13 × 4, handle 2 Size (L × ) inches 13 × 4, handle 2
Weight lbs 2 (without power cord) Weight lbs 2 (without power cord)
Conformity mark Conformity mark
Approval mark Approval mark
Protection class II Protection class II

Article No.: Article No.:

141.228 TRIAC ST, 120 V / 1600 W for push-fit nozzles with US plug / UL 141.316 TRIAC AT, 120 V / 1600 W, with US plug, °F
141.227 TRIAC ST, 230 V / 1600 W for push-fit nozzles with Euro plug 141.382 TRIAC AT, 120 V / 1600 W, with US plug, °C

13
 Overlap welding

Accessories TRIAC ST / TRIAC AT

Wide slot nozzle, push-fit 107.124 0.8” (20 mm) angled nozzle, 70°,
107.123 0.8” (20 mm), o
angled push-fit
107.132 1.6” (40 mm), o
angled
107.133 1.6” (40 mm), perforated
107.135 1.6” (40 mm), PTFE-coated
107.129 2.4” (60 mm) for bitumen 105.431 0.12” (3 mm) speed weld nozzle,
107.131 3.1” (80 mm) for bitumen with small air-slide,push-fit on 0.2”
(5 mm) tubular nozzle
(more: www.leister.com
¨downloads¨) 105.432 0.16” (4 mm) speed weld nozzle,
with small air-slide, push-fit on
Wide slot nozzle 0.2” (5 mm) tubular nozzle
105.475 0.8” (20 mm), straight D 0.2” (5 mm) speed weld nozzle,
105.485 0.98” (25 mm), straight 105.433 with small air-slide, push-fit on
105.494 1.2” (30 mm), 15° angled 0.2” (5 mm) tubular nozzle

107.139 0.18” × 0.5” speed weld nozzle for

105.487 Wide slot nozzle 0.8” (20 mm), curved fillet weld, push-fit on 0.2” (5 mm)
and angular, with inward clamping tubular nozzle
angle 107.137 0.31” (8 mm) speed weld nozzle for
C tape welding, push-fit on
0.2 (5 mm) tubular nozzle
Speed weld nozzle, push-fit on
105.500 Wide slot nozzle 0.8” (20 mm), A
0.2” (5 mm) tubular nozzle
120° angled (right) 30° slanted
forward openly B
106.992 0.22” (5.7 mm), profile A
106.993 0.28” (7 mm), profile B
B 106.989 0.12” (3 mm)
107.130 Wide slot nozzle 1.6” (40 mm), 60° 106.990 0.16” (4 mm)
bent 106.991 0.2” (5 mm)
107.125 0.8” (20 mm) angled nozzle, 60°,
push-fit, for right hander
156.470 Speed weld nozzle bend 0.2”
105.503 0.8” (20 mm) angled nozzle, 60°,
(5 mm) , push-fit on 0.16 (4mm) and
push-fit
0.2” (5 mm) tubular nozzle
100.303 0.2” (5 mm), tubular nozzle,
push-fit
105.575 0.2 x 3.9” (5 x 100 mm), tubular
nozzle, push-fit
106.982 0.2 x 5.9” (5 x 150 mm), extension
nozzle, push-fit

105.576 tubular nozzle 0.2” (5 mm),

90° curved

106.996 Tacking nozzle,

push-fit on 0.2” (5 mm) tubular
nozzle
Mirror welding

14 www.leister.com
 Hot-Air Hand Tools
Draw welding Shrinking

105.622 0.2” (5 mm) tubular nozzle, 107.324 0.5” × 0.4” (12 x 10 mm) sieve reflec-
screw-on tor, push-fit on 0.3” tubular nozzle

106.988 Tacking nozzle, screw-on 107.337 2.0” × 1.4” (50 x 35 mm)

sieve reflector, push-fit

107.338 1.37” × 0.8” (35 x 20 mm)

126.552 0.16” (4 mm) drawing nozzle, sieve reflector, push-fit
screw-on for fluor plastics

107.326 1.0” × 6” (25 x 150 mm) shell reflec-

tor, push-fit
113.666 0.12” (3 mm) drawing nozzle
with tacking tip, screw-on
113.399 0.16” (4 mm) drawing nozzle
with tacking tip, screw-on
113.876 0.12” (3 mm) drawing nozzle
D without tacking tip, screw-on 107.307 1.1” × 1.4” (27 x 35 mm) spoon
113.874 0.16” (4 mm) drawing nozzle reflector, push-fit
without tacking tip, screw-on

Drawing nozzle triangular-shaped,

113.670 With tacking tip, screw-on
0.22” (5.7 mm), profile A 107.339 0.66” × 1.33” (27 x 34 mm)
A 113.877 Without tacking tip, screw-on soldering reflector, push-fit
0.22” (5.7 mm), profile A
B 106.986 Without tacking tip, screw-on
0.28” (7 mm) profile B
106.987 Without tacking tip 0.28 × 0.22” (7 x
5.7 mm) 106.128 0.3” (7.5 mm)
soldering reflector
157.717 Protection nozzle 31.5 mm (1.24”),
air outlet 23 mm (0.9”), protection ring
80 mm (3.15”)

Heating element for

107.344 5.31” (135 mm) welding mirror, 142.718 TRIAC ST / TRIAC AT, 120 V / 1550 W
142.717
push-fit 142.717 TRIAC ST / TRIAC AT, 230 V / 1550 W
100.702 TRIAC S, 120V / 1600 W

143.833 Nozzle adapter for screw-on nozzles

143.332 Protection tube for screw-on nozzles

(for TRIAC ST until april 2017)
156.092 Protection tube for screw-on nozzles
(for TRIAC ST from mai 2017)

141.375 Connection adapter M14 for  0.83

inch nozzle with plug

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

15
ELECTRON ST – Strong, compact and handy

The new ELECTRON ST is a real powerhouse among Leister's hand tools. The appearance of this tool has been
modeled after the new TRIAC range. For the user, this means improved ergonomics and, as a result, the ability to
work in more comfort. Existing ELECTRON nozzles fit the new model.

Product advantages 3

1 Powerful:
Suitable for any application thanks to
its outstanding power rating of up to
3400 W.

2 Perfectly ergonomic:
3.5 ounces lighter and with a
two-component handle that’s nearly
1/2 inch slimmer than its predecessor.
2

3 Infinitely adjustable:
Easy air temperature adjustment up
to 1202°F.

1 4

4 Clean:
Air filters, located on either side, can
be removed and cleaned in no time
at all.

5 Compatible:
5 All predecessor nozzles fit the
ELECTRON ST.

16 www.leister.com
 Hot-Air Hand Tools
Heating shrink tubes/sleeves is just one of many applications
for which the ELECTRON ST can be used.

Hot-air hand tool

ELECTRON ST Accessories, ELECTRON ST

107.258 Wide slot nozzle, push-fit
2.8 × 0.4» (70 x 10 mm), for bitumen
107.266 Wide slot nozzle, 3" flat nozzle
107.653 Wide slot nozzle 3 × 0.08”
(75 x 2 mm), push-fit
151.068 Tool stand for 107.653
107.270 Wide slot nozzle 6 × 0.5”
(150 x 12 mm), push-fit

107.229 Round nozzle 0.8” (20 mm)

107.331 2.83 × 2.8” (72 x 70 mm) folding

reflector, push-fit
107.330 5 × 0.85” (125 x 22 mm) folding
reflector, push-fit

• Suitable for construction sites 107.327 3 × 3” (85 x 85 mm) sieve reflector,

• Leister's most powerful hand tool push-fit
107.333 5.1 × 5.9” (130 x 150 mm) sieve
• Easy-clean air filter reflector, push-fit
• Carbon stop and heating element protection provide 106.127 2.6” (65 mm) sieve reflector,
automatic protective measures push-fit
• Sturdy tool case supplied 107.340 2 × 10” (45 x 250 mm) shell reflector,
push-fit

Technical data
Voltage V~ 230 / 230 / 120 107.346 10.6” (270 mm) welding mirror,
push-fit
Frequency Hz 50 / 60
Power W 2300 / 3400 / 2400
Temperature °F 104 – 1202 142.281 Scraper nozzle
Air volume (68°F) cfm 15.2 (27.9 at max. temp)
Dynamic pressure Pa 3400
Nozzle holder mm 50 107.134 Tape welding nozzle 1.6” (40 mm)
Emission dB(A) 67
Size (L × ) inches 13 × 4”, handle 2”
Weight Lbs 2 (without power cord) 160.842 Protection nozzle, air outlet 44 mm
(1.73”), protection ring 10 mm (0.39”)
Conformity mark
Approval mark
Protection class II
148.933 Protective tube
Article No.
145.562 ELECTRON ST, 120 V/2400 W for push-fit nozzles with US plug
145.574 ELECTRON ST, 230 V/3400 W for push-fit nozzles, without plug Heating elements
145.606 230 V / 3300 W
149.675 230 V / 2200 W
145.604 120 V / 2300 W

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

17
HOT JET S: Small and powerful.

As Leister's most compact hot-air hand tool, the light

weight of the 1.3 lb HOT JET S (including cord and slim
handle), ensures high-powered, fatigue-free  welding.
HOT JET S is especially suited for precise work.

Hot-air hand tool

HOT JET S Accessories HOT JET S

107.141 0.6” (15 mm) wide slot nozzle, push-fit

107.142 0.8” (20 mm) wide slot nozzle, push-fit

105.549 0.4 x 0.08” (10x 2mm) wide slot nozzle

107.144 0.2” (5 mm) tubular nozzle,
push-fit

105.567 0.2 × 6” (5 x 150 mm) extension

nozzle, straight
105.566 0.3” (8 mm) tubular nozzle, straight

105.556 0.8” (20 mm) angled nozzle, 70°

angled, push-fit

• The smallest Leister hot-air hand tool

106.996 Tacking nozzle, push-fit on 0.2” or
• Stepless, electronically controlled temperature
3/16" (5 mm) tubular nozzle
• Stepless, electronically controlled air flow
• Low noise
106.989 0.12” or 1/8" (3 mm) speed welding
• Flexible, integrated tool stand nozzle, push-fit on 0.2” (5 mm)
tubular nozzle
106.990 0.16” or 5/23" (4 mm) speed welding
nozzle, push-fit on 0.2” (5 mm)
D tubular nozzle
Technical data 106.991 0.2” or 3/16" (5 mm) speed welding nozz-
le,push-fit on 0.2” (5 mm) tub. nozzle
Voltage V~ 120
Frequency Hz 50 / 60 156.470 Speed weld nozzle bend 0.2”
Power W 460 (5 mm), push-fit on 0.2” (5 mm)
tubular nozzle
Temperature °F 68 – 1112
Air volume (68°F) cfm 2.1 – 4.9 (6.7 at max. temp) 106.992 0.22” (5.7 mm) A profile speed wel-
Pressure static Pa 230 – 1600 ding nozzle, push-fit
Nozzle holder inch 0.8 A 106.993 0.28” (7 mm) B profile speed welding
Emission dB(A) 59 nozzle, push-fit
B
Size (L × ) inches 9 × 3, Handle 1.6
Weight lbs 1.3 (without power cord)
Conformity mark
105.431 0.12” or 1/8" (3 mm) speed welding
Approval mark nozzle, with small air-slide, push-fit
Protection class II on 0.2” (5 mm) tubular nozzle
105.432 0.16” or 5/32" (4 mm) speed welding
Article No.: nozzle, with small air-slide, push-fit
100.859 HOT JET S, 120 V / 460 W with US plug (UL) on 0.2” (5 mm) tubular nozzle
100.861 HOT JET S, 120 V / 460 W, with US plug D
105.433 0.2” or 3/16" (5 mm) speed welding
nozzle, with small air-slide, push-fit
on 0.2” (5 mm) tubular nozzle

18 www.leister.com
 Hot-Air Hand Tools
HOT JET S with angled nozzle welding a T-joint on the roof. Heating a shrink sleeve with the HOT JET S outfitted with a
push-fit sieve reflector.

107.137 0.3” (8 mm) speed welding nozzle for 131.867 0.2” (5 mm), tubular nozzle, 90°
tape welding, push-fit on 0.2” (5 angled, push-fit
mm) tubular nozzle
C

107.139 0.18 × 0.5” (4.5 x 12 mm) speed wel-

ding nozzle for fillet weld, push-fit on
0.2” (5 mm) tubular nozzle

107.324 0.5 × 0.4” (12 x 10 mm) sieve

reflector, push-fit on 0.2” (5 mm)
tubular nozzle

107.146 0.08” (2 mm) soldering nozzle

107.151 0.16” (4 mm) soldering nozzle

107.148 0.12 × 0.06” (3 x 1.5 mm) soldering

nozzle, oval
107.310 1.4 × 0.8” (35 x 20 mm) sieve
reflector, push-fit
Small and handy: The HOT JET S is perfect when welding
107.311 2.0 × 1.4” (50 x 35 mm) sieve complicated details in billboard and tarpaulin applications.
reflector, push-fit

107.312 1.0 × 1.2” (25 x 30 mm) spoon

reflector, push-fit

107.305 0.6 × 1” (15 x 25 mm) ironing nozzle

143.831 Nozzle adapter for screw-on nozzles

114.734 Ski repair nozzle with base plate

103.607 120 V / 435 W heating element

100.818

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

19
GHIBLI AW: Robust and ergonomic.
The GHIBLI AW is the robust and ergonomic heat gun used for shrink applications in cable manufacturing, heating
and forming in the automobile industry, lap welding of truck sheeting and for deburring plastic parts. Thanks to the
easy-to-grip, two-component frame, the GHIBLI AW fits perfectly in the hand. Temperature and air volume easily
can be adjusted with the proven and intuitive "e-Drive" operating unit. The stand—included in the scope of delivery—

Heat gun

GHIBLI AW
1 Stand:
Thanks to the included stand, the GHIBLI
AW can be placed in an optimum position
at the workstation, thus reducing fatigue.
1

Practical air filter: 2

2
Regular cleaning of the air filters ensures
optimum air flow and maximum power.
3

3 Leister “e-Drive”:
Temperature and air volume are easy to
control and inspect—with the proven
"e-Drive" operating unit—for reproduc-
ible results.

4 Fatigue-free working:
Thanks to the integrated
suspension lug, the GHIBLI AW
can be suspended for
fatigue-free work.

5 6
5

Compatible:
All of its predecessor’s nozzles also fit on
the GHIBLI AW. Comprehensive selection
of compatible accessories.

6 Ergonomic handling:
The two-component handle, and the
GHIBLI’s perfect balance, ensure an
optimal grip and comfortable work, even
under the harshest of conditions.

20 www.leister.com
and the practical device suspension make working eas-

Hot-Air Hand Tools

ier. The air filters can be readily removed and cleaned.
And of course, all of the nozzles from its predecessor fit
the new GHIBLI AW. Shrink applications in cable manufacturing – ideal with the
GHIBLI AW.

Heat gun

GHIBLI AW Accessories for GHIBLI AW

106.998 Wide slot nozzle 0.8” (20 mm), push-fit

106.999 Wide slot nozzle 1.6” (40 mm) inch

push-fit

107.154 Tubular nozzle 0.2” (5 mm) push-fit

107.006 Extension nozzle

0.2 × 5” (5 x 130 mm), straight

107.308 Sieve reflector 2 × 1.4 (50 x 35 mm)

• Ergonomic heat gun 107.309 Sieve reflector 1.4 × .8” (35 x 20 mm)
• Digital temperature control
107.313 Spoon reflector 1 × 1.2” (25 x 30 mm),
• Five-stage air volume control with screw connector
• "e-Drive" operating unit for optimum process control 107.314 25 x 30 mm spoon reflector, push-fit
• 100% Swiss made
107.319 Sieve reflector 2.6” (65 mm)

Technical data
Voltage V~ 120 107.345 Welding mirror 5.3” (135 mm),
Frequency Hz 50 / 60 push-fit
Power W 1800
Temperature °F 149 – 1148
158.474 Protection nozzle 36.5 mm (1.44”),
Air volume (68°C) cfm 10.9 – 14.1 (24.7 at max. temp) air outlet 23 mm (0.9”), protection ring
Pressure static Pa 1800 – 3200 80 mm (3.15”)
Nozzle holder inches 1.5 (36.5 mm)
Emission dB(A) 67 107.007 1.45” (37 mm) Dehorning nozzle
Dimensions (L × W × H) inches 11 × 9 × 4, Handle 2
Weight lbs 3 (without power cord)
Conformity mark 106.132 1.8 × 9.8” (45 x 250 mm)
shell reflector, push-fit
Approval mark
Protection class II
145.580
145.582 Heating element, 120 V / 1700 W
Article No.:
148.078 GHIBLI AW, 120 V / 1800 W, US plug

Scope of delivery: GHIBLI AW, case, stand, operating Instructions

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

21
GHIBLI: “The hot-air gun”.

GHIBLI, derived from a hot desert wind, certainly lives

Hot-Air Hand Tools

up to its name. Thanks to its two-step airflow switching
and steplessly adjustable temperature, the GHIBLI can
be used for the most diverse applications. Shrinking cable connections with the GHIBLI.

Hot-air hand tool

GHIBLI Accessories GHIBLI

106.998 0.8” (20 mm) wide slot nozzle, push-fit

106.999 1.6” (40 mm) wide slot nozzle

107.154 0.2” (5 mm) tubular nozzle,

push-fit

107.006 0.2 × 5” (5mm x 130 mm) extensi-

on nozzle, straight

107.308 1.4 x 2” (34 x 50 mm) sieve reflector

107.309 0.8 x 1.4” (20 x 35 mm) sieve reflector

• Universal tool for welding and shrinking
• Welding results independent of voltage fluctuations and 107.313 1 × 1.2” (25 x 30 mm) spoon reflector,
with screw connector
ambient temperature
107.314 1 × 1.2” (25 x 30 mm) spoon reflector,
• Two-step selectable airflow push-fit
107.319 2.55” (65 mm) sieve reflector,
push-fit

158.474 Protection nozzle 36.5 mm (1.44”),

Technical data air outlet 23 mm (0.9”), protection ring
80 mm (3.15”)
Voltage V~ 120
Frequency Hz 50 / 60
107.007 1.45” (37 mm) Dehorning nozzle
Power W 1500
Temperature °F 68 – 1112
Air volume (68°F) cfm 10.6 / 12.4 (18.7 at max. temp) 107.345 5.3” (135 mm) welding mirror, push-fit
Nozzle holder inches 1.5
Emission dB(A) 70
Size (L × W × H) inches 8 × 3 × 6 , Handle 2
106.132 5.90 × 1.0” (150 x 25 mm) shell
Weight lbs 2.0 (without power cord)
reflector, push-fit
Conformity mark
Approval mark
Protection class II 101.850
115.513 120 V / 1500 W heating element

Article No.:
101.887 GHIBLI 120 V / 1500 W with US plug
101.891 GHIBLI 120 V / 1500 W with US plug (UL)

Additional versions available upon request

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

23
HOTWIND: The new dimension.

Weighing just 6.6 lbs, the HOTWIND can be used

either as an integrated or bench-top device. The high ma-
ximum temperature—1,472 °F (800°C)—means that the
HOTWIND can be used in a variety of ways. The HOTWIND hot air blower is perfectly-suited for drying and
baking of print onto plastic components.

Hot-air hand tool Accessories

HOTWIND PREMIUM / SYSTEM HOTWIND PREMIUM / SYSTEM
Wide slot nozzle, push-fit (a × b)

107.260 3.3 × 0.6” (85 x 15 mm)

107.259 6 × 0.5” (150 x 12 mm)
105.977 7.8 × 0.35” (200 x 9 mm)
107.263 9.8 × 0.5” (250 x 12 mm)
107.262 11.8 × 0.16” (300 x 4 mm)
105.992 15.7 × 0.16” (400 x 4 mm)
b
a 105.991 19.7 × 0.16” (500 x 5 mm)

125.317 Flange connector, push-fit

a = 3.54” (90 mm)
a

107.335 6” (150 mm) sieve reflector,

push-fit
• Ideal for warming, heating, forming and drying
• Stepless adjustment of the heater and blower
• Integrated device and heating element protection
• Extremely smooth running 107.248 Stainless steel filter, push-fit
• Ideal for 24/7 operation on air intake

141.723 Hand tool kit

(handle and protective tube)

Technical data
Voltage V~ 120 / 230
143.530 120 V / 2200 W heating element
Power W 2300 / 3700
Temperature °F 1202 103.607 230 V / 3600 W heating element
Size (L × W × H) inches 13 × 4 × 7
Weight lbs 5 (without power cord)

Conformity mark
Protection class II

Article No.:
140.095 HOTWIND PREMIUM, 120 V / 2300 W, without plug
142.636 HOTWIND SYSTEM, 120 V / 2300 W, without Euro plug
142.609 HOTWIND PREMIUM, 230 V / 3700 W, with Euro plug
142.645 HOTWIND SYSTEM, 230 V / 3700 W, with Euro plug

Additional versions available upon request

24 www.leister.com
FORTE S3: Flameless shrinking.
The most powerful hot-air hand tool from Leister.

Hot-Air Hand Tools

The FORTE S3 is extremely well-suited for flameless
shrinking of pallets and bulk goods.
Flameless shrink-wrapping of pallets and bulk goods with
the FORTE S3.

Hot-air hand tool

FORTE S3

• Powerful pallet shrink-wrapping

• Uniform shrinkage
• May be used in confined spaces
• Integrated tool stand

Technical data
Voltage V~ 3 × 230
Power kW 10
Temperature °F 1202
Size (L × W × H) inches 15 × 5 × 8
Weight lbs 10 (without power cord)
Conformity mark
Approval mark
Protection class II

Article No.:
102.030 FORTE S3, 3 x 230 V / 10 kW, with 32A-Cekon-plug
102.031 FORTE S3, 3 x 230 V / 10 kW, without plug

Additional versions available upon request

25
AIRSTREAM ST: Quiet and efficient air supply unit.

Plug-in the AIRSTREAM ST for a constant, quiet supply of clean, dry, air. Need to work with two hand tools in parallel?
No problem, thanks to the simultaneous power and air supply, you can connect up to two hand tools in parallel. The
AIRSTREAM includes a handle and integrated tool tray, and casters (optional) for easy mobility. The AIRSTREAM ST
is a highly practical solution!

1 Dual operation:
The two tool connections enable
simultaneous use of two hand tools, or
in series with independent settings.

2
2 The quick-change artist:
Easily integrates into a workspace, or
under a bench, by removing the handle
and flipping the integrated tool tray
upside-down, or adding the optional
casters for portability.

3 Quality is measurable:
Adjustable air flow for optimal welding
results as airflow determines energy
transfer and weld quality.

4 Automated cooldown cycle:

Hand tools last longer when cared for
properly. The AIRSTREAM automatically
coos down the connected tools when
power is switched off. When the switch
is turned “on,” the tools automatically
return to previous temperature and
airflow settings as well.

1
3

26 www.leister.com
 Hot-Air Hand Tools
AIRSTREAM ST, the quiet air supply unit.

Blower

AIRSTREAM ST Accessories AIRSTREAM ST

159.535 Caster set

159.481 Air hose connection set

• Quiet operation
• Cooldown mode
• Low energy consumption
• Two hand tools can be connected
• Compatible with WELDING PEN, DIODE and LABOR
• Flow meter
• Brushless technology

Technical Data
Voltage V~ 230 Easy parallel operation.
Power W 215
Frequency Hz 50
Air volume cfm 7.06 (Total)
Emission L pA (dB) < 48 (with 10 ft hose)
Size (L × W × H) inches 24 × 10 × 14 (with handle)
Weight lbs 53
Conformity mark
Protection class I

Scope of delivery:
Air supply unit, hose transition pieces, clips, operating instructions

Article-No.:
158.822 AIRSTREAM ST, 230 V / 215 W, EU-plug
A reliable companion.

27
ROBUST: The powerhouse.

Versatile and operable at high ambient temperatures of

up to 140 °F. Despite its small size, the ROBUST is a real
powerhouse. This blower can supply air for up to three
hot-air hand tools simultaneously. ROBUST blower, serving as the external air supply for the
WELDING PEN.

Blower

ROBUST Accessories ROBUST

107.354 Stainless steel filter,
push-fit on air intake

107.281 1.5” (38 mm) hose connection

adapter, 3 output each 0.55” (14 mm)

113.859 0.55” (14 mm) air hose

101.031 0.55” (14 mm) hose clip for air hose

• High-performance, compact design

• Sound-suppression
• Can be integrated at any position
• Can be used as an external air supply to 1 WELDING PEN R
or up to max. 3 DIODE S/ PID or max. 3 LABOR S
(with 107.281 hose adapter)

Technische Daten
Frequency Hz 50 60
Power W 250 250
Air volume (68 °F ) cfm 42 46
Static pressure psi 1.16 1.52
Max. ambient temperature °F 140 140
Max. air inlet temperature °F 140 140
Noise emission level dB(A) 62 62
Protection (IEC 60529) IP 54 IP 54
Outside diameter air inlet inches 1.5 (38 mm) 1.5 (38 mm)
Outside diameter air outlet inches 1.5 (38 mm) 1.5 (38 mm)
Weight lbs 18 18
Conformity mark
Protection class l

Artikel-Nr.:
50 Hz 1 × 120 1 × 230 3 × 230 / 400
Voltage V~
60 Hz 3 × 440 – 480
Without cord Article No.: 103.434 103.429
10 ft cord / Euro plug Article No.: 103.432

28 www.leister.com
WELDING PEN: Slim and flexible.

Hot-Air Hand Tools

The WELDING PEN is a hot-air hand tool optimized
for draw welding. Due to its slim design and swiveling
external air supply, the Welding Pen makes hard
work easy. WELDING PEN R, combined with angle adapters, make wel-
ding possible even in very tight spaces.

External air hand tool

WELDING PEN R / WELDING PEN S Accessories WELDING PEN R / S

105.622 0.2” (5 mm) tubular nozzle, 15°
screw-on
WELDING PEN R
106.988 Tacking nozzle, screw-on

113.666 0.12” (3 mm) round drawing nozzle

WELDING PEN S with tacking tip, screw-on
113.399 0.16” (4 mm) round drawing nozzle,
with tacking tip, screw-on

113.876 0.12” (3 mm) round drawing nozzle

D without tacking tip, screw-on
113.874 0.16” (4 mm) round drawing nozzle,
without tacking tip, screw-on
Triangular drawing nozzle
113.670 with tacking tip, screw-on,
• Digital temperature display (WELDING PEN R) A 0.22” (5.7 mm) profile A
113.877 without tacking tip, screw-on
• Connection makes working easier 0.22” (5.7 mm), profile A
B
• Cooled heating element tube 106.986 without tacking tip, screw-on
• Used in combination with ROBUST blower, AIRSTREAM ST 0.28” (7 mm), profile B
106.987 without tacking tip, screw-on
or compressed air 0.28 × 0.22» (7 x 5.5 mm)
126.552 0.16” (4 mm) drawing nozzle,
screw-on
for fluor plastics

Angular adapter for screw-on nozzles,

screw-on
Technical data 127.726 30°
Voltage V~ 120 127.727 45°
Power W 600 141.375 Connection adapter M14 for 
Temperature °F 68 – 1112 0.84”(21.3 mm) nozzle with plug
Size (L × ) inches 11 × 2, handle 1
2 (with 10 ft cord / air hose and 113.597
113.412 120 V / 600 W heating element for
Weight lbs
Y-connection) WELDING PEN R and WELDING PEN S
Conformity mark
Protection class II
Article No.:
114.576 WELDING PEN R, 120 V / 600 W, with US plug, 2.7 yards hose
113.708 WELDING PEN S, 120 V / 600 W, with US plug, 2.7 yards hose
114.380 WELDING PEN R, 230 V / 1000 W, with Euro plug, 2.7 yards hose
113.081 WELDING PEN S, 230 V / 1000 W, with Euro plug, 2.7 yards hose
114.926 WELDING PEN R, 230 V / 1000 W, with Euro plug, 6.6 m hose
114.274 WELDING PEN S, 230 V / 1000 W, with Euro plug, 6.6 m hose
114.927 WELDING PEN R, 230 V / 1000 W, with Euro plug, 9.8 m hose Swiveling air hose
114.273 WELDING PEN S, 230 V / 1000 W, with Euro plug, 9.8 m hose for easy working.
More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

29
DIODE PID / S: The powerful pair.

There are two options for high-quality work: The

closed-loop DIODE PID provides the perfect welding
temperature at all times. The DIODE S easily puts you in
control with a manual temperature knob. Convenient wire welding using the powerful and lightweight
DIODE PID.

External air hand tool Hand tool and blower

DIODE PID / DIODE S DIODE PID / DIODE S with MINOR

DIODE PID

DIODE S

• Operated with MINOR or ROBUST blower, AIRSTREAM ST MINOR blower and DIODE PID with screw-on drawing nozzle.
or with compressed air • Ideal for assembly work
• Digitally-controlled and displayed temperatures (DIODE PID)
• Cooled heating element tube
• Suitable for field applications when used in combination with
a MINOR blower

Technical data Technical data

Voltage V~ 120 Voltage V~ 120
Power W 1600 Power W 1600
Temperature °F 68 – 1112 Temperature °F 68 – 1112
Size (L × ) inches 10 × 2, handle 1.6 Size (L × ) inches 10 × 2, handle 1.6
3 lbs 6 lbs
Weight lbs Weight lbs
(with 10 ft cord / 10 ft air hose) (with 10 ft cord / 5 ft air hose)
Conformity mark Conformity mark
Protection class II Protection class II

Article No.: Article No.:

101.291 DIODE S, 120 V / 1600 W, for push-fit nozzles, with US plug 101.447 DIODE S, 120V / 1700 W, for push-fit nozzles, connected to MINOR
101.292 DIODE S, 120 V / 1600 W, for screw-on nozzles, with US plug 5 ft air hose, US plug
101.311 DIODE PID, 120 V / 1600 W, for push-fit nozzles, with US plug
101.312 DIODE PID, 120 V / 1600 W, for screw-on nozzles, with US plug
101.281 DIODE S, 230 V / 1600 W, for snap-fit nozzles, with Schuko plug
101.303 DIODE PID, 230 V / 1600 W, for snap-fit nozzles, with Schuko plug
Additional versions available upon request
Additional versions available upon request

General accessories 34 / 35

30 www.leister.com
 MINOR: The mobile air supplier.

Hot-Air Hand Tools

Don’t be deceived by the MINOR’s small size and low
weight. This blower delivers sufficient air to enable
quality work with the DIODE PID / DIODE S or LABOR S.
The MINOR blower as an air suppy for the DIODE PID.

Accessories DIODE PID / DIODE S Blower

With push-fit nozzle MINOR

100.303 0.2” (5 mm) tubular nozzle, for
versions with push-fit nozzles
100.300 Heater tube for push-fit nozzles
100.304 Heater tube for screw-on nozzles
Speed welding nozzle,push-fit on
0.2” (5 mm) tubular nozzle
106.992 0.22” (5.7 mm), profile A
A 106.993 0.28” (7 mm), profile B
106.989 0.12” (3 mm)
B 106.990 0.16” (4 mm)
106.991 0.2” (5 mm)
156.470 0.2” (5 mm) bent

106.996 Tacking nozzle, push-fit on

0.2” (5 mm) tubular nozzle

143.833 Nozzle adapter for screw-on nozzles

• Lightweight and compact

100.650
100.296 120 V / 1600 W heating element • Powerful
for DIODE PID
100.702
• Serves as a mobile air supply for the DIODE PID / DIODE S
100.689 120 V / 1600 W heating element
for DIODE S and LABOR S
• Suitable for work on construction sites
With screw-on nozzle
105.622 0.2” (5 mm) tubular nozzle,
screw-on

106.988 Tacking nozzle, screw-on

Technical data

113.666 0.12” (3 mm) round drawing nozzle Voltage V~ 120

with tacking tip, screw-on Power W 100
113.399 0.16” (4 mm) round drawing nozzle, Air volume (68°F) cfm 14.1
with tacking tip, screw-on
0.12” (3 mm) round drawing nozzle Pressure static psi 0.58
113.876
D without tacking tip, screw-on Air outlet (external) inches 0.6 (15 mm)
113.874 0.16” (4 mm) round drawing nozzle, Size (L × ) inches 9 × 4, handle 2.5
without tacking tip, screw-on
Weight lbs 2.5 (with 10 ft cord)
113.670 Triangular drawing nozzle, with tacking Conformity mark
tip, screw-on, 0.22” (5.7 mm)
A Protection class II
113.877 Without tacking tip, screw-on
B 0.22” (5.7 mm), profile A Article No.:
106.986 Without tacking tip, screw-on 108.749 MINOR, 120 V / 100 W, with US plug
0.28” (7 mm), profile B
106.987 0.28 × 0.22” (7 x 5.5 mm)
126.552 0.16” (4 mm) drawing nozzle, screw-
on, for fluor plastics
Additional versions available upon request
141.375 Connection adapter M14 for 
0.84” (21.3 mm) nozzle with plug

More at the new accessories catalog at www.leister.com/accessories

31
LABOR S: Small and handy.

Developed for laboratory use but also eminently suitab-

le for small welding tasks where access is difficult.

LABOR S, used in combination with MINOR as an

external air supply.

External Air Hand Tool

LABOR S Accessories LABOR S

107.144 0.2” (5 mm) tubular nozzle, push-fit

Speed weld nozzle, push-fit on

0.2” (5 mm) tubular nozzle
106.992 0.22” (5.7 mm), profile A
A 106.993 0.28” (7 mm), profile B
106.989 0.12” (3 mm)
B 106.990 0.16” (4 mm)
106.991 0.2” (5 mm)
156.470 0.2” (5 mm) bent
106.996 Tacking nozzle, push-fit on 0.2”
(5 mm) tubular nozzle

143.831 Nozzle adapter for screw-on nozzles

• Temperature adjustment via rotary knob

107.146 0.08” (2 mm) soldering nozzle
• Very small and handy device
• Ideal for draw welding and tacking 107.151 0.16” (4 mm) soldering nozzle
• Air supply with ROBUST blower, AIRSTREAM ST, MINOR or
107.148 0.12 × 0.06” soldering nozzle, oval
with compressed air
105.622 0.2” (4 mm) tubular nozzle,
• Ideal for mobile use when coupled with MINOR blower
screw-on

106.988 Tacking nozzle, screw-on

113.666 0.12” (3 mm) round drawing nozzle

with tacking tip, screw-on
Technical data 113.399 0.16” (4 mm) round drawing nozzle,
Voltage V~ 120 with tacking tip, screw-on
113.876 0.12” (3 mm) round drawing nozzle
Power W 600 / 700
without tacking tip, screw-on
Temperature °F 68 – 1112 D
113.874 0.16” (4 mm) round drawing nozzle,
Size (L × ) inches 7 × 2, handle 1.3 without tacking tip, screw-on
0.33 (without air hose and 113.670 Triangular drawing nozzle, with tacking
Weight lbs
without cord) tip, screw-on, 0.22” (5.7 mm)
A
Conformity mark 113.877 Without tacking tip, screw-on
B 0.22” (5.7 mm), profile A
Approval mark
106.986 Without tacking tip, screw-on
Protection class II 0.28” (7 mm), profile B
106.987 0.28” × 0.22” (7 x 5.7 mm)
Article No.:
101.721 LABOR S w/junction box, 120 V / 600 W w/US plug, 10 ft PVC hose, UL 126.552 0.16” (4 mm) drawing nozzle,
101.740 LABOR S w/junction box, 120 V / 600 W, w/US plug, 10 ft silicon hose, UL screw-on,for fluor plastics

Additional versions available upon request 101.643

101.581 120 V / 600 W heating element

More at the new accessories catalog at www.leister.com/accessories General accessories 34 / 35

32 www.leister.com
 The new “GROOVY” gouging tool also is perfectly suited for
floor joints.

Hot-air hand tools

General accessories
106.974 3” (80 mm) silicone pressure roller 160.015 Cable extension cord 16 yards (15 m)
PUR 5 x 2.5 mm2, with CEE 400V plug

159.239 Cable extension cord 16 yards 15 m

140.160 1.6” (40 mm) silicone pressure roller PUR 3 x 2.5 mm2, with EU plug 230V
with ball bearings (silicone)
140.599 Spare roll for 140.160
106.997 0.23” (6 mm) rotary burr for drilling
140.161 1.1” (28 mm) silicone pressure roller
machine, for car repairs
with ball bearings (silicone)
140.598 Spare roll for 140.161

106.976 1.1” (28 mm) PTFE pressure roller

116.798 Brass brush
106.972 Brass pressure roller with ball bearings
142.647 Brass brush 0.12” (3 mm)

106.981 Pressure roller for custom seal

107.348 Tool rest for TRIAC AT, TRIAC ST,
ELECTRON ST
103.401 Tool rest for HOT JET, LABOR S

138.314 Seam probe tester for overlap seams

137.855 Leister cutter with four spare blades

138.902 Hooked blade for LEISTER-cutter

111.346 Chamfer planer with seven spare
(10 dispensers with 10 pcs=100 pcs)
blades, for sealing sheets
111.348 Spare blades kit containing ten blades
138.539 Straight-edge blade for LEISTER-cutter
(10 dispensers with 10 pcs = 100 pcs)
106.966 Hand grooving tool
106.968 Spare blades for hand grooving tool

151.188 Chamfer planer for T-joints for sealing 151.382 Inside corner tool
sheets
153.009 Plastfix

152.676 Weld seam template

154.259 Scraper blade

157.544 Leister Universal scissors 10.2 inch
with special shaft grinding

154.026 Contour scraper

160.353 Cable cord roller 27.3 yards (25 m)
PUR 5 x 2.5 mm2, with 1 x CEE 400V
and 2 x EU socket 230V
161.152 Cable cord roller 27.3 yards (25m) PUR
116.586 Storage case for TRIAC AT,
5x2.5mm2, with 1x CEE 400V and 2x
TRIAC ST, ELECTRON ST
T23 CH socket 230V
161.207 Cable cord roller 27.3 yards (25m) PUR
5x2.5mm2, with 1x CEE 400V and 2x
Typ E with ground pin socket 230V

More at the new accessories catalog at www.leister.com/accessories

34 www.leister.com
 Hot-Air Hand Tools
Welding rods
Article Colour Article

Colour
Profile

Profile
lbs

lbs
Welding accessories PE Welding accessories div.
104.283 HDPE welding rod A 6.6 104.297 PA welding rod A 6.6
104.294 HDPE welding rod A 6.6 104.298 PC welding rod A 6.6
104.284 HDPE welding rod B 11 104.313 PC welding rod / ABS / ALPHA (Honda) A 6.6
104.299 HDPE welding rod B 11 104.308 PUR welding rod A 6.6
106.650 HDPE welding band C 2.2 106.654 Xenoy welding band C 4.4
104.300 LDPE welding rod A 6.6 106.642 PPs welding rod, flame resistant A 6.6
161.612 HDPE welding rod D 4.4 104.304 PVDF welding rod A 6.6
Welding accessories PP 104.303 POM welding rod A 6.6
104.287 PP welding rod A 6.6 Test bundles
104.301 PP welding rod A 6.6
104.288 PP welding rod 11 Test bundle bodywork welding rods, each consisting of
B
profile A pieces of 14.6" single marked
107.036
126.356 PP welding band C 4.4 6x HDPE, 6x PP, 6x PA, 6x PC, 6x ABS, 6x PCABS / APLHA Honda,
6x PC / PBTP / Xenoy
161.611 PP welding rod D 4.4 A
Welding accessories PVC
104.296 PVC-U welding rod (hard) A 6.6 Test bundles standard each consisting of
profile A pieces of 14.6"single marked
104.278 PVC-U welding rod (hard) A 6.6 107.037 5x PVC-U, 5x PVC-P, 5x PP, 5x ABS, 5x HDPE, 3x PC, 3x PA,
106.641 PVC-U welding rod 6.6 3x POM, 3x LDPE, 3x PC / ABS / ALPHA Honda,
A
3x PC / PBTP / Xenoy
A
104.280 PVC-U welding rod (hard) B 11
104.279 PVC-U welding rod (hard) B 11
Test bundle welding band each consisting of
104.302 PVC-P welding rod (soft) A 6.6
107.040 profile A pieces of 14.6" single marked
Welding accessories ABS 9x HDPE, 8x 0.08’’ white, 9x PP, 8x 0.08’’ natural, 9x ABS,
8x 0.08’’ white, 9x PC / PBTP / Xenoy grey
104.295 ABS welding rod A 6.6 C

113.587 ABS welding rod A 6.6

107.027 ABS welding band C 2.2

Profile sizes
Dimensions in inches
Profile A Profile B Profile C Profile D

5.7
0.22 7
0.28 4
8
0.3
0.15
3.7 5
0.2 2
0.08

35