Updated Handover Form - Checklist
Updated Handover Form - Checklist
4) DNS1: 192.168.1.1
5) DNS2: 8.8.8.8
Hardware Point
Hardware Point Example
1) CH1:- Ex.
2) CH2:- 1) CH1:-4-20mA
ADC Port 3) CH3:- 2) CH2:-0-10V
4) CH4:- 3) CH3:-0-2V
4) CH4:-0-5V
Device Customization
R&D
Customization
Project
Customization
(In connection)
Future Expansion
Checked By
Name:-
Sign :-
Authorised by
Name :-
Sign :-
Submited by
Name Sign
1) SWARNENDU DEB
2)
3)
SuryaLo
(Monitoring and Cont
CHECKL
S.N CONTENT
Plant status
PR % Calculation of plant
If on site more than 1 solar MFM are used ( or MFM in Wing) then addition of all
MFM power should match with main solar MFM (Plant) and same day Gen should
match with main solar MFM (Plant)
Addition of all inverter power should be match with main solar MFM (Plant) and s
Day Gen should be match.
Check DC & AC Capacity. of all Inverter Should be match with Plant AC & DC C
2 Inverter
DC current *voltage = power
2 Inverter
Spikes in Graphical View
PR should be correct as per Addition of all inverter day Gen. Please check in Tabula
view>> Inverter>>Day gen matrix tab
Summation of wing Power = Total power of all inverter in that particular wing
4 Wing Summation of Wing Day gen= Day Gen of all inverter in that particular wing
Check DC & AC Capacity. of addition of all wings Should be match with Plant AC
DC Cap.
PR (%) Calculation
is it Correct the data of All Radiation sensors /module /Ambient Sensor Etc
is it Correct the INS report of all sensors (Tilte, Ex-Tilte, GH & Ex-GH)
Zero Export
8 Controlling
PVDG
10 Portal Customization
Note :
Remark
SuryaLog
(Monitoring and Controlling with AI)
CHECKLIST
CONTENT ✔/×
✔
ation of plant
aphical View ×
re than 1 solar MFM are used ( or MFM in Wing) then addition of all solar
should match with main solar MFM (Plant) and same day Gen should
main solar MFM (Plant)
ll inverter power should be match with main solar MFM (Plant) and same
✔
uld be match.
voltage = power ✔
voltage = power ✔
aphical View ×
e correct as per Addition of all inverter day Gen. Please check in Tabular
ter>>Day gen matrix tab
*Current = power ✔
ports of Wing
f Wing Day gen= Day Gen of all inverter in that particular wing
ulation
of sensors 1
g Sensors and Name
aphical view
✔
✔
FTP
redentials
NOTE EXAMPALE
_______________________________________
_____
SURYASENSOR 1) Tilt