Scribd
Upload
13 views

Project Number 3

This technical sheet provides specifications for various furniture items including a single bed, clothes wardrobe with 2 doors, coat rack with mirror, nightstand, and coffee table. The single bed frame is made from square tubing and has particleboard support and mattress frames. The wardrobe has 2 doors, hanger supports, and handles. The coat rack has a mirror and coat hooks. The nightstand has compartments, an inset drawer, and a handle. The coffee table has standard dimensions. All items are made from particleboard and have ABS edge banding.

Uploaded by

Valentin Mihai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Project Number 3

This technical sheet provides specifications for various furniture items including a single bed, clothes wardrobe with 2 doors, coat rack with mirror, nightstand, and coffee table. The single bed frame is made from square tubing and has particleboard support and mattress frames. The wardrobe has 2 doors, hanger supports, and handles. The coat rack has a mirror and coat hooks. The nightstand has compartments, an inset drawer, and a handle. The coffee table has standard dimensions. All items are made from particleboard and have ABS edge banding.

Uploaded by

Valentin Mihai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Tehnical Sheet

Denomination U/M Quantity Pictures


Single Bed:

Frame made from square tubing 30x30x1.5 mm


Leg height: 300 mm
Electrostatically painted
Bed dimensions (LxW): 1972x972 mm
Mattress support made from raw particleboard 1900x900x16 mm or wooden slats
Mattress frame made from laminated particleboard 36 mm thick
Fully edged with 2 mm thick ABS edge banding
Side height: 250 mm
Headboard height: 650 mm
Legs with anti-slip system
Joints with no visible external elements
Particleboard color: H1399 ST10 - Denver Brown Oak Truffle - EGGER, or similar
Mattress - dimensions: 1900x900x200 mm
buc 40
Support structure: a continuous interconnected coil system, approximately 200-250
coils/m2, made from steel wire with a diameter of 1.6-1.9 mm and a coil block height
between 145-160 mm
Protective layer between coil block and comfort layer: textile material (felt) mechanically
and chemically bonded with polyacrylate binders, minimum weight 900gr/m2
Quilted package: - nonwoven material thermally bonded with a minimum weight of 400
gr./m2
Nonwoven material made from 100% polypropylene with a minimum weight of 35 gr./m2
Covering material over the quilted package is jacquard type fabric
Comfort package: batting with a minimum density of 500 gr./m2, 25 kg/m3 and a thickness
of 2 cm
Covering the sides and forming the casing for the coil structure: polyurethane foam with a
thickness of 4/7 cm and a minimum density of 25 kg/m3
Cover material: fibrous fabric composed of 50% polyester (PES) and 50% polypropylene
Clothes Wardrobe with 2 Doors:

As per the sketch


Material: 18 mm laminated particleboard
Fully edged with 2 mm thick ABS edge banding
Back material: 2.5 mm PPL
Inset PFL board, not applied
3 Blum hinges applied on each door
buc 20
2 hanger supports: nickel-plated oval bar
Shelf spacing: 250 mm
Base height: 80 mm
2 handles 128 mm - AA337
Material: Aluminum
Finish: Satin
Joints with no visible external elements
Particleboard color: H1399 ST10 - Denver Brown Oak Truffle - EGGER, or similar
Coat Rack with Mirror:

As per the sketch


Material: 18 mm laminated particleboard
Fully edged with 2 mm thick ABS edge banding
Mirror dimensions: 800x300 mm
5 coat hooks - Gamet WP13 buc 20
Dimensions (HxW): 58x78 mm
Material: Metallic
Finish: Satin
10 pieces with the mirror mounted on the right side
10 pieces with the mirror mounted on the left side
Particleboard color: H1399 ST10 - Denver Brown Oak Truffle - EGGER, or similar
Nightstand:

As per the sketch


Dimensions (LxWxH): 400x400x400 mm
Casing material: 36 mm double laminated particleboard
Fully edged with 2 mm thick ABS edge banding
Back material: 2.5 mm PFL
Inset PFL board, not applied
buc 40
1 handle 128 mm - AA337
Material: Aluminum
Finish: Satin
2 compartments of equal dimensions
Inset drawer
Soft-close mechanism
Joints with no visible external elements
Particleboard color: H1399 ST10 - Denver Brown Oak Truffle - EGGER, or similar
Coffee Table:

As per the sketch


Dimensions (LxWxH): 500x500x410 mm
buc 20
Material: 18 mm laminated particleboard
Fully edged with 2 mm thick ABS edge banding
Joints with no visible external elements
Particleboard color: H1399 ST10 - Denver Brown Oak Truffle - EGGER, or similar

You might also like