KYRIAZIS SOLAR

WATER HEATER L 150/2 m2

1. This system use clean, renewable solar energy to heat the tank water hot for
shower and washing, It is environment friendly and also safety.
2. Our flat plate solar collector has passed Europe standard certificate--Solar
Key mark which has higher efficient and heat absorption. As long as there is
sunshine, can continuously bring hot water.
3. Our pressurized solar tank adopts the food grade , it has stronger corrosion
resistance and longer span life.
4. Our frame can be installed both inclined and flat roof structure and combine
with buildings completely.
5. The whole system can withstand 10 BAR pressure, running under pressure
to provide comfortable hot water for shower and bathing.

Specification:
Tank capacity 150L
External dimension(mm) Φ520x1180
1
 Outer tank material Color coating galvanized steel
Sola Inner tank material GLASS LINE EMAYE STEEL 2.0MM
r Max working pressure 10 BAR
Tank Connection material Pvc pipes 22
Connection valves Copper valves
Certificate Solar Key mark and CE
Flat
Model No. GR SOLAR GS 150
Solar
Dimension(L x W x T)(mm) 2000x1000x85
Collector
Total area 2.0M2x1pc
Construction Type Copper tube and full plate
Absorber coating Blue Titanium
Collector Efficiency 95%
Material of Header and
Red copper TP2
Riser
pipe
Header pipe diameter Φ22mm
Riser pipe diameter Φ8mm
Volume of fluid 1.9L
Welding Laser Printing
Textured tempered glass with
Material of Cover
Low iron content
Thickness of Cover 3.2mm
Transmission of Cover 92% (MS)
Insulation material Rockwool
Sealing material TPV
Weight Empty 29 KG
Material Galvanized steel
Mountin
Angle 45°
g
Bracket style A: Flat roof B:Sloping roof
Bracket

User Instruction
Dear Customers, before installing and using solar water heater, please read
this manual carefully and attention to the following terms, so that our products
are better service for you, and please keep this Manual for future maintenance
staff and you reference.

 This product can only be acquired by the company approved by the

professional personnel to install. For self-installation of solar water heater,
our company will not undertake any responsibility.
 Used to install water heater roof for solid steel reinforced concrete
structure, can withstand at least four to five times the weight of the filled
2
 with water.
 The company is equipped with safety relief valve (rated pressure: 6 Bar)
can not be changed or modified the installation location, and safety relief
valve port should be connect with atmosphere.
 In order to protect your water heater tank, suggest 2-3 years to
replace
new magnesium anode rod.
 Water Heater improper use may cause burns when water temperature is
too high, please be sure to use after mixing hot and cold water.
 Don’t use the solar water heater when lightning and also pull out the plug.
 It is strictly prohibited use solar water heater in the case of outlet non-
grounded connection.
When you use solar water heater, please cut off electric heating and it is strictly

prohibited to charged
 It is strictly prohibited to replacement parts and disassembling
maintenance without permission.
 Lift transport and installation process is strictly prohibited strong impact, so
as not to damage the tank.

1, Production performance and parameters

 Shape Parameters ：
L（mm） Installation
Model D1(mm) D2(mm) A(mm) B(mm) H(mm)
Angle

 Technical Parameters 520 390 920 1790 2000 45º

1450
Tank Rated Collector
Absorber Collector Total net
Model Capacity Presse Size Quantity
Area（m²) weight（kg)
（L） BAR （mm） (pcs)

3
 GR SOLAR
2 150 10 2000*1000*80 1 99
GS 150

2, Production connection

STOP END 1 /2 RELIEF VALVE

RESISTANCE ΟVAL
+ THERMOSTATE
+ MAGNESIUM ANODE

INLET

SAFETY VALVE OUTLET

STOP END Ø 22

STOP END Ø 22

4
 Upper Bottom
Relief
Model Inlet Outlet valve circulati circulation
on hole hole

GR G1/2 G1/2 G1/2 G1/2

SOLAR G1/2
GS 150

Installation Guide
一、 Determine the installation position
1. View top layer environment and indoor pipeline arrangement and also

consult users’ suggestions to determine the position of the scientific and

reasonable installation. The position can be a good load bearing and fully

sunlight and also convenient fluctuation water pipe layout and heat

2. Identify the south direction. The collector part of solar water heater should
faced south direction, generally by east to west is not more than 10 degrees,
ensuring the best water heater collector.

3. The front of the water heater as far as possible without shading objects, If
any should maintain a certain distance from solar water heater to shading
objects, the general control of the height of 1.5-2 times the shade, to ensure
good lighting the water heater.

5
1, Relief valve
2, inlet
3, outlet

二、Installation of bracket and tank

1 、 Open the packages of tank, bracket and collector, according to the packing
list to check parts is complete or not.
2、 Firstly to install the both sides of front legs and then install middle bar.
3、 Install fixed rails of flat plate solar collector.
4. After finish the complete frame, please don’t lock all of the nuts to prevent the need
to adjust the bracket assembly when installing water tank and collector.
5. When the main tank on the bracket, please make sure two or more persons
to operate. The main tank at the bottom of the bracket to be embedded bolts
pillow with intact as much as possible to maintain the level of the tank, not
skewed, do not install the embedded nut fixed die.
三、Install solar collector、Connection collector and tank
1 、 Solar collector is mounted to the bracket crossbar and don’t lock nuts.
2、Please use special fittings to connect the upper circulation hole of tank to circulation
outlet of collector, meanwhile connect the bottom circulation hole to the circulation
10
inlet.
3、Lock all of the screws except collector bolts and protect the painting surface
and not to scratch the protective layer.
4、Feed water , after fill full of the tank, please double check all of holes on the tanks
have leaking or not, and also double check the collector and tank connection joint
have
leaking or not. If have to reconnect, if necessary, replace the gaskets, confirm
the joint without leakage.
5、Fixing Locking collector nuts.

STOP END 1 /2 RELIEF VALVE

RESISTANCE ΟVAL
+ THERMOSTATE
+ MAGNESIUM ANODE

INLET

SAFETY VALVE OUTLET

STOP END Ø 22

11
1

四、Pipeline Installation

RELIEF VALVE
STOP END
1/2 Electr. resistance
+ Magnes. Anode

OUTLET
INLET

1, Relief valve
2, inlet
3, heater exchange
4, mg
5, sensor
6, outlet

Warning：
1 、 Please use the teflon tape or sealing ring on the pipeline connections to
prevent leaking.
2 、 User-defined of hot and cold water pipes should be withstand pressure
1.2 mpa, and also have good heat preservation.
3 、 Please switch off the water valve and also release the tank pressure when you
don’t use the solar water heater for a long time.

Use Instructions
 For the first time or long term stop before using again, please conduct the
comprehensive inspection of water heater, piping valves, safety relief
valve，PT valve and so on.
 Once a system operation should ensure the normal water supply.
 In the heating process, the safety relief valve discharge opening small drop
of water is a normal phenomenon, indicating that system are discharge
pressure in the tank. When the water temperature reach 90 degrees, the PT
valve at the top of tank will be open to discharge part of high temperature
water, to ensure the normal work of the water tank.
 Regularly open the pressure relief valve, such as drop of water out shows
safety valve is working properly.
12
 Maintenance
The water heater only by professional service personnel for repair and
maintenance, incorrect method may cause serious injury accident and property
loss

 Periodically turn the water heater safety valve wrench, to see if there is
water out, and if not, indicates that the safety valve is damaged, please
connect professionals to repair.
 Suggest to replace every 2-3 years the magnesium anode rod of water tank.
 Not to use for a long time, please unplug the power supply.

Common Troubleshooting
phenomenon Reason Solution

There is too
much dust on Wipe the dust on the

the collector collector Remove the

surface or have obstructions in front of

Water
obstructions in collector
temperature is
not high on front
sunny day of collector

Pipe insulation is Call the service hotline

bad
No tap water
supply
No out of Inlet valve did not
water Open inlet valve
open
Pipeline jam Call the service hotline
The safety
valv Tap water Away from the inlet
pressure pipe of
e has a
continuous
drip exceeds security water heater to install a
pressure
Valve pressure
setting relief valve
（The installer should
be
professional）

13
 Packing List
Ite Name Quanti
m ty
１ Water tank １
component
box
２ flat plate solar １
collector
component box
３ Bracket １
component box

Water tank component parts list in the box

Ite Parts’ Name Quanti

m ty
１ Safety Valve １
２ ＰＴvalve １
３ Copper ４
connections
Upper
４ １
circulatio
n
pipes
Bottom
５ １
circulatio
n
pipes
６ Tank 1
Support

14