PS112 4015

12" Point Source

1 x 12NTLW3500 + ND3T
 PS112 4015 | SPEAKERS
12NTLW3500 8Ω
SPECIFICATIONS KEY FEATURES
Nominal Diameter 300 mm (12.0 in) • 97 dB SPL 1W / 1m average sensitivity
Nominal Impedance 8Ω • 88 mm (3") ISV voice coil
Minimum Impedance 5.8 Ω • 900 W AES power handling
Nominal Power Handling1 900 W • Extremely balanced BL shape for maximum SPL
Continuous Power Handling2 1800 W • Optimized thermal conductivity
Sensitivity3 97.0 dB • Maximum linearity and inductance symmetry for extended
Frequency Range 50 - 3000 Hz mid-band clarity
Voice Coil Diameter 88 mm (3.5 in) • Ideal for two-ways and line array applications

DESIGN
Surround Shape Triple roll
PARAMETERS4 Cone Shape Curvilinear
Resonance Frequency 53 Hz Magnet Material Neo
Re 5.1 Ω Recommended Enclosure 50.0 dm3 (1.77 ft3)
Qes 0.35 Recommended Tuning 58 Hz
Qms 8.0
Qts 0.33
MOUNTING AND SHIPPING INFO
Vas 45.0 dm3 (1.59 ft3)
Overall Diameter 310 mm (12.2 in)
Sd 531.0 cm2 (82.31 in2)
Bolt Circle Diameter 295 mm (11.61 in)
η₀ 1.8 %
Baffle Cutout Diameter 282.0 mm (11.1 in)
Xmax 8.3 mm
Depth 193 mm (7.6 in)
Mms 80.0 g
Flange and Gasket Thickness 13 mm (0.53 in)
Bl 19.5 Txm
Net Weight 4.7 kg (10.36 lb)
Le 0.46 mH
Shipping Weight 5.5 kg (12.13 lb)
EBP 151 Hz

1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
 PS112 4015 | SPEAKERS
ND4015Ti2 8Ω
SPECIFICATIONS KEY FEATURES
Throat Diameter 40 mm (1.5 in) • Next Gen Titanium diaphragm for higher sensitivity and
Nominal Impedance 8Ω extended high frequency
Minimum Impedance 6.9 Ω • 113 dB 1W / 1m average sensitivity
Nominal Power Handling1 160 W • 1.5 inch throat exit
Continuous Power Handling2 320 W • 4 inch edgewound aluminium voice coil
Sensitivity3 113.0 dB • 320W max. program power handling
Frequency Range 0.8 - 20.0 kHz • HF copper sleeve for reduced distortion and increased
Recommended Crossover4 0.8 kHz output
Voice Coil Diameter 100 mm (4.0 in) • BEM optimized 4-slot metal alloy phase plug
Winding Material Aluminum • Available also in 1.4” and 2” exit version
Diaphragm Material Titanium
Flux Density 2.0 T
Magnet Material Neodymium

MOUNTING AND SHIPPING INFO

Overall Diameter 150 mm (5.91 in)
Depth 57 mm (2.24 in)
Net Weight 3.2 kg (7.05 lb)
Shipping Weight 3.35 kg (7.39 lb)
Shipping Box 170 x 170 x 80 mm (6.69x6.69x3.15 in)

1. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated nominal impedance.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. 12 dB/oct. or higher slope high-pass filter.
 PS112 4015 | HORNS
XR1496C 8Ω
90° (h) x 60° (v) constant coverage

KEY FEATURES MOUNTING AND SHIPPING INFO

• 1.4 inch throat entry Throat Diameter 35,5 mm (1,4 in)
• High damping composite structure Horizontal Coverage -6db 90° (15-10) avg range (1,25kHz - 12,5kHz)
• Uniform on-axis and off-axis frequency response Vertical Coverage -6db 60° (18-12) avg range (1,25kHz - 12,5kHz)
• 90° x 60° horizontal and vertical constant coverage Directivity Index 9dB (1.8-1,2) average range (1,25kHz - 12,5kHz)
• Very low distortion at high sound pressure Usable Frequency Range Above 800 Hz
• Optimized weight thanks to composite material structure Recomm. Xover Frequency 800 Hz or more
Material Composite material
MOUNTING AND SHIPPING INFO
Baffle Cutout Dimension 240x240x180 mm (9.45x9.45x7.09 in)
Net Weight 1.4 kg (3.09 lb)
HORIZONTAL 1/3 OCTAVE POLAR PLOTS VERTICAL 1/3 OCTAVE POLAR PLOTS
 PS112 4015 | HORNS
XR1464C 8Ω
60° (h) x 40° (v) constant coverage

KEY FEATURES MOUNTING AND SHIPPING INFO

• 1.4 inch throat entry Throat Diameter 35,5 mm (1,4 in)
• High damping composite structure Horizontal Coverage -6db 60° (10-2) avg range (1,25kHz - 12,5kHz)
• Uniform on-axis and off-axis frequency response Vertical Coverage -6db 40° (25-0) avg range (1,25kHz - 12,5kHz)
• 60° x 40° horizontal and vertical constant coverage Directivity Index 11dB (2-1) average range (1,25kHz - 12,5kHz)
• Very low distortion at high sound pressure Usable Frequency Range Above 800 Hz
• Optimized weight thanks to composite material structure Recomm. Xover Frequency 800 Hz or more
Material Composite material
MOUNTING AND SHIPPING INFO
Baffle Cutout Dimension 240x240x180 mm (9.45x9.45x7.09 in)
Net Weight 1.4 kg (3.09 lb)
HORIZONTAL 1/3 OCTAVE POLAR PLOTS VERTICAL 1/3 OCTAVE POLAR PLOTS
 PS112 4015 | BILL OF MATERIALS

• 1x 12NTLW3500 – 8 ohm
• 1x ND4015Ti2 – 8 ohm
• 1x XR1496C or XR1464
• 1x Adattatore 1.4 - 1.5
• 16x M5 Wood T-Nuts
• 8x M5 Hex socket head ISO 4762 with washer and grower
• 8x M5 Hex sochet CTSK head ISO 10642
• 2x Neutrik NL4MP
• Edilfiber damping material 30mm - 30kg/m3
• Wood: 15mm Birch plywood
 PS112 4015
Version with XR1496C Horn
PS112 4015 | MEASUREMENTS

(dB) Level, Sound pressure Sensitivity 2.83V @1m With Preset

120

110

100

90

80

70

60

50
50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
PS112 4015 | MEASUREMENTS
CEA2034 With Preset
(dB) Sound Pressure Level Directivity Index (dB)
120 35

110 30

100 25

90 20

80 15

70 10

60 5

50 0
50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
FL: - CEA2034 - On Axis FL: - CEA2034 - Sound Power
FL: - CEA2034 - Listening Window FR: - CEA2034 - Sound Power DI
FL: - CEA2034 - Early Reflections FR: - CEA2034 - Early Reflections DI
PS112 4015 | MEASUREMENTS

Horizontal Contour -6dB Beamwidth

With Preset
PS112 4015 | MEASUREMENTS

Vertical Contour -6dB Beamwidth

With Preset
PS112 4015 | PROCESSING
LF & HF
(dB) Level, Sound pressure
25

20

15

10

-5

-10

-15

-20

-25
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)

Transfer Function
 PS112 4015
Version with XR1464C Horn
PS112 4015 | MEASUREMENTS

(dB) Level, Sound pressure

Sensitivity 2.83V @1m With Preset
120

110

100

90

80

70

60

50
50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
PS112 4015 | MEASUREMENTS
CEA2034 With Preset
(dB) Sound Pressure Level Directivity Index (dB)
120 70

110 60

100 50

90 40

80 30

70 20

60 10

50 0
50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
- CEA2034 - On Axis - CEA2034 - Sound Power
- CEA2034 - Listening Window - CEA2034 - Sound Power DI
- CEA2034 - Early Reflections - CEA2034 - Early Reflections DI
PS112 4015 | MEASUREMENTS

Horizontal Contour -6dB Beamwidth

With Preset
PS112 4015 | MEASUREMENTS

Vertical Contour -6dB Beamwidth

With Preset
PS112 4015 | PROCESSING
LF & HF
(dB) Level, Sound pressure
25

20

15

10

-5

-10

-15

-20

-25
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)

Transfer Function
 PS112 4015
Assembly Information
PS112 4015 | DAMPING MATERIAL
Edilfiber (Polyester) 30kg/m3 – 30mm thick

Follow carefully the quantity and positioning

PS112 4015 | DIMENSIONS
Total dimensions
PS112 4015 | DIMENSIONS
Top view
PS112 4015 | DIMENSIONS
Front view
PS112 4015 | DIMENSIONS
Back view
PS112 4015 | DIMENSIONS
Baffle
PS112 4015 | DIMENSIONS
Side view
PS112 4015 | DIMENSIONS
Driver support
PS112 4015 | NOTES