SMARTG-02 INDIRECT

THREE PHASE METER

EM341-5ID2
Transformer / Bulk Applications

INTRODUCTION
The SmartG-02 electricity meter series are modern, electronic, fully programmable
devices, designed for application in AMI systems for monitoring and control of
electricity consumption.
The SmartG-02 electricity meter series meet remote data transmission
requirements and enable readouts of various measurands. The meters are
compliant with IEC and DLMS/COSEM standards and have been designed to
serve billing purposes.
EM341-5ID2, is a four wire, Prepaid/Postpaid compact electronic meter (indirect
connection meter), with accuracy class 0.2, capable of measuring Active &
Reactive Energy and is type approved according to IEC & EN standards. This
makes it perfectly suitable for Transformer / Bulk Applications.
The indirect connection meter is used to measure energy consumption in 220
VAC, 50 Hz, and 1-6 Ampere, and operates in a three-phase four wire power
network. It contains an independent measuring element allowing consumed
energy to be measured. There is a LED mounted on the front panel of the meter,
pulsing at a rate of 1000 pulses per KWh or KVAr for energy registration.
The modular nature of the meter means that its communications interface
supports a broad range of field-upgradable communications options including
GPRS, PLC, and RF among others.

STANDARDS
• IEC 62052-11 • IEC 62056-42
• IEC 62053-23:2003 • IEC 62056-46
• EN 50470 • IEC 62056-53
• IEC 695-2-1 • IEC 62056-61
• IEC62055 (for contactor) • IEC 60068

www.elsewedyemg.com
[email protected]
 METER SPECIFICATIONS METER FEATURES
Electrical Characteristics Feature Description
Nominal Voltage 3X220/380 V Display • Fully electronic (LCD) with backlight

Voltage Variation (Min) -40% Vn • The meter is capable of storing two profiles. One
for energy and one for other parameters.
Voltage Variation (Max) 30% Vn
Load Profile • Each profile has an integration period of 1 to 60
Nominal Current (Ibase) 1A minutes

Maximum Current (Imax) 6A • The profiling period extends for at least 45 days

Nominal Frequency 50 Hz • The EM341-5-SmartG-02 records a considerable

amount of data for extended periods of time
Frequency Variations ±5%
Events • In addition, the EM341-5-SmartG-02 stores up to
0.2 Active according to IEC 400 events
Accuracy Class 62053-22
2 Reactive • Events are logged with a date/time stamp

0.1 % Ib according to IEC

Starting Current
62053-22 • The EM341-5-SmartG-02 has the ability to detect
the following types of tamper attempts:
Wiring 3 PH, 4 wires Network
3  Meter Cover Open
Number of elements 3 3  Terminal Cover Open
3  Module Cover Open
Power Consumption ≤ 2W 3  Reverse Connection
Tamper Proofing
KWh 3  Earth or Current Bypass Connection
Measurements 3  Overload
MD(A)(KW)
3  Over Voltage
Back-up Battery Type Lithium Battery 3  Under Voltage
3  Phase Sequence
Back-up Battery Lifetime 10 Years
3  Missing Potential
Memory
• The meter supports two alarm methods
Type Flash memory
3  LED Indicator
Retention Period More than 20 Years 3  Audible Alarm
Alarms
3  Messages on LCD
Environmental Conditions
• The meter can be configured to give any
IP Rating IP54 combination of alarms as required

Temperature Range -5°C to +70°C • The relay control modes include:

Storage Temperature -25°C to +80°C 3  Remote Disconnect

3  Local Disconnect
Humidity Range <90%
• The relay is configurable to be triggered in the
event of:
Altitude 0-3600M
3  Meter cover open
Service Life 20 Years 3  Meter Terminal Cover Open
Relay Operation 3  Module Cover Open
Communication 3  Energy Reverses
Standard Optical Port (IEC 3  Earth or Current Bypass Connection
62056-21) 3  Meter Current Overload
Optical Interface 3  Meter Over Voltage and Under Voltage
Complies with DLMS/COSEM
HDLC mode-E protocol 3  At Low Battery
3  Phase Sequence
RS-485 3  Missing Potential
Serial Communication Port Complies with DLMS/COSEM 3  Low Credit
direct HDLC protocol
Supported through the use • With each power-up or firmware update, the
AMI/AMM Module of a GSM/GPRS Modem, PLC meter shall diagnose:
Modem or RF Modem
Auto-diagnostics 3  Meter and memory integrity
Optical Port: 9600 bit/s 3  Display, alarms & battery status
Data Transmission Rate RS-485: 9600 bit/s GPRS: 3  External communication module status
56–114 Kbit/s
D
MECHANICAL SPECIFICATIONS
4 Dimensions: (L x W x D) = W
277.3 mm x 177.4 mm x 88.5 mm L

4 Weight: Approximately 1.8Kg

4 Meter Housing: Flame Retardant Polycarbonate