0% found this document useful (0 votes)
170 views1 page

UL Certification E162823 - Component - Plastics

This document provides certification information for a polycarbonate plastic material called "TAIRILITE" produced by FORMOSA CHEMICALS & FIBRE CORP PLASTICS DIV. The plastic achieved a V-0 flame class rating for minimum thicknesses of 1.0mm, 1.2mm, 1.5mm, and 3.0mm. It also lists other tested properties such as comparative tracking index, dielectric strength, and heat deflection temperature. The document contains the manufacturer and certification information for the plastic material.

Uploaded by

aaquil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
170 views1 page

UL Certification E162823 - Component - Plastics

This document provides certification information for a polycarbonate plastic material called "TAIRILITE" produced by FORMOSA CHEMICALS & FIBRE CORP PLASTICS DIV. The plastic achieved a V-0 flame class rating for minimum thicknesses of 1.0mm, 1.2mm, 1.5mm, and 3.0mm. It also lists other tested properties such as comparative tracking index, dielectric strength, and heat deflection temperature. The document contains the manufacturer and certification information for the plastic material.

Uploaded by

aaquil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UL Certification: E162823 - Component - Plastics 1/1

iq.ul.com
The information presented on the UL Prospector datasheet was acquired by UL Prospector from the producer of the material. UL
CLICK TO CONTINUE Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the
View additional material information including performance and processing data data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Component - Plastics E162823


Guide Information

FORMOSA CHEMICALS & FIBRE CORP PLASTICS DIV


201 TUNG HWA N RD, TAIPEI 105 TW

AC383(x)(f1)
Polycarbonate (PC) "TAIRILITE", furnished as pellets

Min. Thk Flame RTI RTI RTI


Color (mm) Class HWI HAI Elec Imp Str
NC 1.0 V-0 1 0 130 130 130
1.2 V-0 1 0 130 130 130
1.5 V-0 1 0 130 130 130
3.0 V-0, 5VA 1 0 130 130 130

Comparative Tracking Index (CTI): 2 Inclined Plane Tracking (IPT) kV: -


Dielectric Strength (kV/mm): - Volume Resistivity (10x ohm-cm): -
High-Voltage Arc Tracking Rate (HVTR): 3 High Volt, Low Current Arc Resis (D495): 7
Dimensional Stability (%): -

(f1) - Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
(x) - Replace by one digital 0-9, unconcerned with formula or constituent changed
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of
plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2012-10-09


Last Revised: 2018-11-30 © 2018 UL LLC

IEC and ISO Test Methods


Test Name Test Method Units Thk (mm) Value
Flammability IEC 60695-11-10, IEC 60695-11-20 Class (color) 1.0 V-0 (NC)
1.2 V-0 (NC)
1.5 V-0 (NC)
3.0 V-0, 5VA (NC)
Glow-Wire Flammability (GWFI) IEC 60695-2-12 °C 1.5 960
3.0 960
Glow-Wire Ignition (GWIT) IEC 60695-2-13 °C 1.5 875
3.0 875
IEC Comparative Tracking Index IEC 60112 Volts (Max) - -
IEC Ball Pressure IEC 60695-10-2 °C - -
ISO Heat Deflection (1.80 MPa) ISO 75-2 °C - -
ISO Tensile Strength ISO 527-2 MPa - -
ISO Flexural Strength ISO 178 MPa - -
ISO Tensile Impact ISO 8256 kJ/m2 - -
ISO Izod Impact ISO 180 kJ/m2 - -
ISO Charpy Impact ISO 179-2 kJ/m2 - -

https://iq.ul.com/ul/cert.aspx?ULID=103923456 2018/12/03

You might also like