Scribd
Upload
814 views

HDPE Pipe Flow Rates

The document provides a table with minimum wall thickness requirements for polyethylene (PE 100) pipes of different outside diameters, dimension ratios (SDR), and pressure ratings (PN). It specifies minimum wall thickness in millimeters based on the intersection of outside diameter, dimension ratio such as SDR51, and pressure rating such as PN3.2. The table also includes flow rates in cubic meters per second for PN9.6 pipes of varying diameters.

Uploaded by

alaa sadik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
814 views

HDPE Pipe Flow Rates

The document provides a table with minimum wall thickness requirements for polyethylene (PE 100) pipes of different outside diameters, dimension ratios (SDR), and pressure ratings (PN). It specifies minimum wall thickness in millimeters based on the intersection of outside diameter, dimension ratio such as SDR51, and pressure rating such as PN3.2. The table also includes flow rates in cubic meters per second for PN9.6 pipes of varying diameters.

Uploaded by

alaa sadik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

for PE 100

Dimension Ratio  SDR51 SDR41  SDR33  SDR26

Pressure
PN3.2 PN4 PN5 PN6.4
(bar)

Outside Diameter Minimum Wall Minimum Wall Minimum Wall Minimum Wall
(mm) Thickness (mm) Thickness (mm) Thickness (mm) Thickness (mm)

32 - - - -
40 - - - 1.8
50 - - 1.8 2
63 - 1.8 2 2.5
75 1.5 1.9 2.3 2.9
90 1.8 2.2 2.8 3.5
110 2.2 2.7 3.4 4.2
125 2.5 3.1 3.9 4.8
140 2.8 3.5 4.3 5.4
160 3.2 4 4.9 6.2
180 3.6 4.4 5.5 6.9
200 3.9 4.9 6.2 7.7
225 4.4 5.5 6.9 8.6
250 4.9 6.2 7.7 9.6
280 5.5 6.9 8.6 10.7
315 6.2 7.7 9.7 12.1
355 7 8.7 10.9 13.6
400 7.9 9.8 12.3 15.3
450 8.8 11 13.8 17.2
500 9.8 12.3 15.3 19.1
560 11 13.7 17.2 21.4
630 12.3 15.4 19.3 24.1
710 13.9 17.4 21.8 27.2
800 15.7 19.6 24.5 30.6
900 17.6 22 27.6 34.4
1000 19.8 24.5 30.6 38.2
1200 23.5 29.4 36.7 46.9
1400 34.3 42.9 53.5
1600 31.4 39.2 49 61.2
1800 - 44 55.1 68.8
2000 - 48.9 61.2 76.4
2250 - 55 70 86
2500 - 61.2 77.7 95.6
SDR21 SDR17.6

Flow Rate @
PN8 PN9.6 1.5 m / sec
for PN 9.6

Minimum Wall Minimum Wall


Thickness (mm) Thickness (mm)

- 1.8 3.41900784
1.9 2.3 5.31214524
2.4 2.9 8.28147996
3 3.6 13.19871996
3.6 4.3 18.68958144
4.3 5.1 26.99412156
5.3 6.3 40.21437564
6 7.1 52.04067696
6.7 8 65.178864
7.7 9.1 85.23459036
8.6 10.2 107.9764862
9.6 11.4 133.1039218
10.8 12.8 168.544166
11.9 14.2 208.1627078
13.4 15.9 261.1361344
15 17.9 330.441241
16.9 20.1 420.0808306
19.1 22.7 533.0167772
21.5 25.5 674.853039
23.9 28.4 832.6508314
26.7 31.7 1045.386403
30 35.7 1322.711956
33.9 40.2 1680.323322
38.1 45.3 2133.269798
42.9 51 2699.412156
47.7 56.7 3332.106475
57.2 68 4798.954944
66.7 79.2 6534.717604
76.2 90.6 8533.079192
85.8 - -
95.3 - -
107.2 - -
119.1 - -

You might also like