Hostapur OS Liquid
Hostapur OS Liquid
Hostapur® OS liquid
Anionic surfactant for industrial applications
Appearance Application
pale yellow, clear liquid Hostapur OS liquid has a strong wetting and cleaning
action and good foaming power. The foam quality is
Iodine color number excellent, with high stability.
max. 20
• Hostapur OS liquid is used in the production of
pH value, 1 % active substance in water detergents and cleaning agents. It is particularly
6.0 – 8.0 suitable for use in foam cleaners for upholstery
and carpets, because of the low stickiness of the
Solubility at 20 °C residues left on the fibres.
soluble in water
• Hostapur OS liquid is also used in the textile,
Compatibility leather and construction industries as a wetting
compatible with anionic and nonionic surfactants, agent, detergent and foaming agent.
resistant to acids and alkalines
• Hostapur OS liquid is used as emulsifier in emul-
Density at 20 °C [g/cm³] sion polymerisation of styrene/butadiene latex,
approx. 1.07 styrene/butadiene rubber and acrylate and sty-
rene/acrylate dispersions.
*) These characteristics are for guidance only and should not be taken as product specifications. The tolerances are given in the product specification sheet. For
further information on product properties, specifications, toxicological, ecological and safety data, please refer to the MSDS.
January 2010
= Registered trademark by Clariant Page 1/2
Hostapur® OS liquid
This information is based on our present state of knowledge and is intended to provide general notes on our products
and their uses. Therefore it should not be construed as guaranteeing specific properties of the products described or
their suitability for a particular application. Any existing industrial property rights must be observed. The quality of
our products is guaranteed under our General Conditions of Sale.
January 2010
= Registered trademark by Clariant page 2/2