Scribd
Upload
34 views

Universal ProgrammerSuperPro 610P

The SuperPro 610P is a universal device programmer that supports a wide range of devices. It features project files that allow storing preparations and batch commands. It has auto functions that organize programming steps sequentially and a production mode for high volume programming. The programmer also has production statistics logging, file type auto recognition, serial number auto increment, and intellectual property protection features. It supports various device packages and interfaces via USB.

Uploaded by

kamlesh thummar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views

Universal ProgrammerSuperPro 610P

The SuperPro 610P is a universal device programmer that supports a wide range of devices. It features project files that allow storing preparations and batch commands. It has auto functions that organize programming steps sequentially and a production mode for high volume programming. The programmer also has production statistics logging, file type auto recognition, serial number auto increment, and intellectual property protection features. It supports various device packages and interfaces via USB.

Uploaded by

kamlesh thummar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SuperPro 610P

High Speed Universal Device Programmer

 Universal 48-pin driver supports today's most complex devices


 Programs eMMC devices up to 64 GB
 IC manufacturer approved programming algorithms
 Entry level programmer perfect for developers and hobbyists, alike

Features:-

Project Files The project file stores preparations before programming. Users could also restore and
save work environment. The project file includes device type, buffer data, operation option settings,
configuration bit settings and batch commands. Project files may be password protected to increase
security and reliability when operated by untrained operators.

-Auto Function The Auto function organizes different functions into a sequential group (erase, blank
check, program, verify and protect). Functions are executed in sequential order similar to a batch
command.

-Production Mode Once a chip is inserted correctly, the programmer automatically starts batch
command of erase, blank check, program and verify. Auto chip detection saves time and increases
efficiency.

-Production Statistics A log file could be used to save operation information before exiting the
program. Log files can also be used to facilitate quality tracking.

-Factory Mode This mode is designed for factory volume production. To prevent operation errors
from destroying chips and wrong data written to the chip, SuperPro will operate in Auto function
mode. The administrator can set a password to prevent unauthorized access to the system.

-Auto Recognition of File Types We support almost all kinds of known file formats including file
formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S,
Tektronix (linear & segmented), JEDEC, POF, etc.

-Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on


Superpro 610P. This feature is implemented by

Option. Auto Increment allows users to add unique serial number into the device. After each
successful programming, the software automatically changes the value by the specified increment
mode.

-Intellectual Property Protection Password settings available in both PC and stand-alone mode.

Hardware and Electrical Specifications

Devices EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA


Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD,
supported
CPLD, EPLD, Firmware HUB, Microcontroller, MCU
DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP,
Package types PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP,
supported SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN,
HVQFN etc.
PC interface USB 2.0
Power supply AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
Main unit: 178(L) x 130(W) x 40(H) Package: 320(L) x 300(W) x 85(H)
Dimensions
mm mm
Main unit: Weight 0.85 lbs (0.38
Weight Package: Weight 3 lbs (1.8Kg)
Kg)

Expanded Features

 Universal 48-pin driver supports today's most complex devices


 Improved programming processor for high-speed programming
 Programs devices with Vcc as low as 1.2V
 In-system programming (ISP/ICP) capability
 Programming / testing features for TTL CMOS Logic ICS and memories
 Only IC manufacturer approved programming algorithms used for high reliability
 Over-current and over-voltage protection for safety of the chip and programmer
hardware
 Compatible with Windows XP / Vista / 7 / 8 / 10 (32/64 bit) , Windows 11(32/64 bit)
 Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability

You might also like