HEAVY DUTY (HD) ROV

Technical Data

Heavy Duty (HD) ROV

• StationKeep™
• Reduced deck space
• Reduced maintenance/
replacement and repair time with
modular design
• 150 hp HPU
• Improved thruster performance
The HD ROV has a smaller design while still providing
high performance for subsea operations, making this
ROV ideal for tasks in tight spaces. Designed with
SPECIFICATIONS
the most advanced technology, this system leads the
ROV
industry in reliability and performance. The vehicle’s
Classification: Heavy-Duty Work Class ROV System
modular design decreases maintenance time by a factor Payload: 551 lb / 250 kg
of 6-to-1 compared to standard industry vehicles. Through Frame Lift: 6,614 lb / 3,000 kg
HPU Motor: 150 SHP (shaft horsepower)
Depth Rating: 9,843 ft / 3,000 msw (optional 4,000 msw)
Since the HD ROV is compact, it requires less deck Main Hydraulics: 4,000 psi @ 64 gpm / 257 bar @ 242 lpm
GENERAL

space while still providing high performance with a Aux Hydraulics: 3,000 psi @ 20.6 gpm / 207 bar @ 78 lpm
150 hp HPU and 551 lb payload for subsea operations. Hydraulic Functions: 8 Station Proportional Valve Pack 3 Station High Flow Valve Pack
Telemetry System: Digital Telemetry System (DTS) GB Ethernet
Its smaller size coupled with its closed loop control
Maximum Speed
system and station-keeping makes the HD ROV easy Fore/Aft: 3.15 knots • Lateral: 2.3 knots • Vertical: 2.43 knots
to maneuver in tight situations. As for environmental Bollard Pull
impact, the stainless steel tubing used throughout the Fore/Aft: 1,984 lbf / 900 kgf • Lateral: 1,984 lbf / 900 kgf
Vertical Up: 1,874 lbf / 850 kgf • Vertical Down: 1,874 lbf / 850 kgf
hydraulic system offers the most reliable method to
avoid leakage. Specification details listed are for marketing purposes only. Any reproduction in part or as a whole without the written
permission of C-Innovation is prohibited. Equipment may change due to product improvement or other reasons. Confirm
equipment specification and performance at time of order placement.
C - I N N O VAT I O N • 985.612.1700 • w w w . c - i n n o vat i o n . c o m
 HEAVY DUTY (HD) ROV
Technical Data

SPECIFICATIONS (continued)
Instrumentation
Depth Sensor: Paroscientific, Digiquartz Series 8000
Heading/Attitude Sensor: Fiber Optic Gyro or Ring Laser Gyro
Doppler Velocity Log: RDI Workhorse Navigator 1200
Sonar: Kongsberg Simrad MS1171
Cameras: Imenco (HD available)
Auto Control Modes
GENERAL

Heading: +2°, 360° Range

Depth/Altitude: +6 in / 15 cm
Pitch: +2°, +12/-5° Range
Roll: +2°, +6 ° Range
StationKeep ™: 3.9 in / 10 cm Watch Circle
Manipulators
Port: Atlas (7 function rate control)
STBD: Atlas (7 function rate control) or Titan 4 (7 function spatially correspondent)
Tether Management System (TMS)
Type: Top Hat
DEPLOYMENT

Depth Rating: 13,123 ft / 4,000 msw

Tether Line Pull: 220 lbf / 100 kgf Minimum
Tether Line Speed: Variable, 0-164 fpm / 0-50 m min
Latch Capacity: 19,842 lb / 9,000 kg @ DAF 3g
Tether Capacity: 2,789 ft / 850 m x 1.38 in / 28 mm OD
Work / Maintenance platforms are integrated into the TMS frame
Launch & Recovery System (LARS)
HANDLING SYSTEM

A-Frame: Standard Over Center or Heavy Weather Low Dip

Winch
Type: Electric AHC or Hydraulic Standard
Heave Reduction: 90%
Umbilical Length: 9,843 ft / 3,000 m Standard (4,000 m available)
3 Control Stations: Remote / Deck Control Van • Fixed / Winch Back Panel
CERTIFICATIONS

DNV for Containers (vans), Winch and A-Frame

Zoning as Required
U/W Electrical Design Standard

Specification details listed are for marketing purposes only. Any reproduction in part or as a whole without the written permission of C-Innovation
is prohibited. Equipment may change due to product improvement or other reasons. Confirm equipment specification and performance at time of
order placement.

C - I N N O VAT I O N • 985.612.1700 • w w w . c - i n n o vat i o n . c o m