9/ 10

10
TLE - Bread and Pastry
Production NC II
Quarter 2 – Module 1
Tools, Equipment, and Baking
Terms in Pastry Production

CO_Q2_TLE10_Bread_and_Pastry _Production_Module 1
Technology and Livelihood Education – 10
Quarter 2 – Module 1: Tools, Equipment, and Baking Terms in Pastry
Production Alternative Delivery Mode
First Edition, 2020

Republic Act 8293, section 176 states that: No copyright shall subsist in any work
of the Government of the Philippines. However, prior approval of the government
agency or office wherein the work is created shall be necessary for exploitation of
such work for profit. Such agency or office may, among other things, impose as a
condition the payment of royalties.

Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright
holders. Every effort has been exerted to locate and seek permission to use these
materials from their respective copyright owners. The publisher and authors do not
represent nor claim ownership over them.

Published by the Department of Education

Secretary: Leonor Magtolis Briones
Undersecretary: Diosdado M. San Antonio

Development Team of the Module

Writers: Merlie C. Mangannay

Editors:
Reviewers: Jonalyn C. Ambrona, Primo B. Aligo
Illustrator:
Layout Artist: Bernie Rojo Pamplona
Management Team: Estela Leon-Cariño
Rosita C. Agnasi
Georgina C. Ducayso
Khad M. Layag
Jocelyn P. Samidan
Dolores M. Anecang
Atkinson F. Tudlong

Printed in the Philippines by ________________________

Department of Education –Cordillera Administrative Region

Office Address: Wangal, La Trinidad,

Benguet
Telefax: (074)-422-4074
E-mail Address: [email protected]
 10
TLE - Bread and Pastry
Production NC II
Quarter 2 – Module 1
Tools, Equipment and Baking Terms in
Pastry Production
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear
learners, can continue your studies and learn while at home. Activities,
questions, directions, exercises, and discussions are carefully stated for you
to understand each lesson.

Each SLM is composed of different parts. Each part shall guide you
step by-step as you discover and understand the lesson prepared for you.

Pre-tests are provided to measure your prior knowledge on lessons in

each SLM. This will tell you if you need to proceed on completing this module
or if you need to ask your facilitator or your teacher’s assistance for better
understanding of the lesson. At the end of each module, you need to answer
the post-test to self-check your learning. Answer keys are provided for each
activity and test. We trust that you will be honest in using these.

In addition to the material in the main text, Notes to the Teacher are
also provided to our facilitators and parents for strategies and reminders on
how they can best help you on your home-based learning.

Please use this module with care. Do not put unnecessary marks on
any part of this SLM. Use a separate sheet of paper in answering the exercises
and tests. And read the instructions carefully before performing each task.

If you have any questions in using this SLM or any difficulty in

answering the tasks in this module, do not hesitate to consult your teacher
or facilitator.

Thank you.

iii
 Lesson Tools, Equipment, and

1 Baking Terms in Pastry

Production

What I Need to Know

This module was designed and written with you in mind. It is here to help you
master the concepts of bread and pastry production. The scope of this module
permits it to be used in many different learning situations. The language used
recognizes your vocabulary level. The lessons are arranged to follow the standard
sequence of the course. But the order in which you read them can be changed to
correspond with the textbook you are now using. This module provides you the
necessary information and activities to enrich your knowledge and skills in preparing
and presenting pastries.

Lesson 1 –Tools, Equipment and Baking Terms in Pastry Production

After going through this module, you are expected to:

1. identify tools and equipment used in pastry production;

2. demonstrate how to use tools and equipment in pastry production; and,
3. familiarize self and explain pastries and baking terms related to pastry
production.

Before going through this module, you

must answer first the activity below.

llustration by: CLPC

1
 What I Know

Activity 1: Break the Code

Directions: Use the key below to help you break the code and to complete the
sentences below. Write your answer on a separate sheet of paper.

1 2 3 4 5
1 A B C D E
2 F G H I J
3 K L M N O
4 P Q R S T
5 U V W X Y
6 Z , . / -

1. In baking pastries you need __ __ __ __ __ to monitor your baking time.

45 24 33 15 43

2. The oven should have __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

35 52 153445 15 33 41 15 43 11 45 51 4315

3. You should use __ __ __ __ __ __ __ __ __ __ __ __ __ __ to measure small

33 15 11 44 51 43 24 34 22 44 41 35 35 34
amount of baking powder and salt.

4. __ __ __ __ __ __ __ __ __ __ __ __ is used to slice and chopped fruits in making

21 43 15 34 13 23 31 34 24 52 15
44 fruit pie.
5. You need __ __ __ __ __ __ __ __ __ __ __ __ to stamp out individual cookies
from
13 35 35 31 24 15 13 51 45 45 15 43
rolled dough.

6. In decorating pastries, __ __ __ __ __ __ __ __ __ __ is used to come up with

41 11 44 45 43 55 45 24 41 44
different design of frosting.

7. __ __ __ __ __ is done by pinching the sides and tops of pie or tart crust.

13 43 24 33 41

8. The product that is highly proportioned by fat to flour with a little amount of
water is __ __ __ __ __ __.
41 11 44 45 43
55
9. You need to __ __ __ __ __ __ __ the crème patisserie into the creampuff.
41 24 44 15 35 51 4 5

2
10. To slash the surface of pie dough with knife is to __ __ __ __ __.
44 13 35 43 15

11. The length of time that a product is fit for consumption is called __ __ __ __
__ - __ __ __ __.
44 23 15 32 21 32 24 21 15

12. To fold laminated dough into thirds like a letter to incorporate fats is __ __
__ __ __ __ __ __ __.
45 23 43 15 15 21 35 32 14

13. To prepare pizza in advance you can __ __ __ __ __ __ __ __ __ the crust and

top
12 11 31 15 12 32 24 34 14
needed ingredients and bake again for 10 minutes.

14. In rolling dough, __ __ __ __ __ __ __ __ __ is needed to attain the desired shape

41 11 44 45 43 55 33 11 45
and size of dough.

15. __ __ __ __ __ __ __ __ __ __ __ is used to cut dough in scaling.

14 35 51 22 23 13 51 45 45 15 43

What’s In

In the past lessons you have met the different baking terms used in preparing
and presenting different breads. Same with pastry production you will encounter
culinary and technical terms related to pastries and you will learn also the needed
tools and equipment in preparing and presenting pastries. Are you ready to learn
those things? But before that let’s see if you can still remember what you have learned
these past lessons and relate to our topic today by answering the questions below.

True or False
Directions: Write TRUE if the statement is correct and FALSE if it is wrong. Write
your answer on a separate sheet of paper.
1. Rolling pin is used in flattening dough of bread and pastry.
2. Dusting of flour is needed in kneading and rolling bread and pastry.
3. Weighing scale is used only in preparing breads.
4. In scaling dough, you have to cut it first with pastry wheel.
5. Cut in is one method in mixing bread dough and pastry crust.
6. Bread requires a special technique in mixing ingredients for flakiness and
tenderness.
7. Sifter is use to pass dry ingredients into a fine sieve to remove lumps.
8. Pastries uses largely yeast as leavening agent.
9. Oven temperature is important in baking breads and pastries.
10. Different oven has different baking period.

3
 What’s New

Pastry is essentially dough made from fat, flour, water and

salt. Eggs, cheese or sugar can be added for richer dough. Success
and failure depends on how the shortening and flour are mixed and how the gluten
is developed. Yet success or failure depends on how the fats and flour are mixed. And
for you to successfully prepare and present different kinds of pastries you should be
familiar with the different terms used in making pastry and demonstrate how to use
the identify tools and equipment needed.
Activity 1.
A. Classification of Tools

Directions: Classify the following tools based on their usage and identify the terms
use in baking. Write the letter of your answer on a separate sheet of paper.
A. Baking Tool D. Measuring Tool
B. Mixing Tool E. Miscellaneous
C. Cutting Tool F. Decorating
_____ 1. Rolling pin

_____ 2. Wire cooling rack

_____ 3. Parchment paper

_____ 4. Pastry wheel

_____ 5. Cookie cutter

B. Identification
Directions: Identify the word that is being described below. Write your answer on a
separate sheet of paper.
1. This is the process of alternating layers of dough with butter in pastry making.
2. This is the trade of making pastries as well as a shop where pastries are sold.
3. The thick sauce that made from puréed and strained vegetables or fruits is
______________.
4. The process where in a liquid or mixture has reached its boiling temperature
and produces a lot of bubbles is __________________.
5. This is done by using your finger to press pie dough together.

4
 What Is It
It’s time for you to read and understand the information below.

I. Baking Tools and Equipment in Pastry Making

In the previous lesson, bread making has its own appropriate tools and
equipment, although most of these are also used in pastry production. However,
there are tools which are intended only for pastry production. Tools and equipment
may come in different designs and brands so it is always wise to consider quality and
safety standards of materials to buy. Although you may still use simple, improvised
and local utensils, these utensils/tools or equipment could save time as they are
readily available in the markets.
Safety precautions and hygiene must always be observed at all times during
the whole process in baking.
A. MeasurP53.32 841.92 reW* nurP5BT/F1 12 Tfg1.92 8ip2q0.0A.

5
 1. Chef’s or French knives = known as all-purpose knives because it is use
for chopping, slicing, and mincing tasks.
2. Kitchen shears = use in cutting dried fruits and vegetables, fresh herbs,
and cutting pastry.
3. Grate and shredder = use to grate, shred or slice vegetables, fruits and
cheese.
4. Cookie cutters = these are made of thin sheet metal or plastic that has
been molded or formed into shape. These are used to stamp out individual
cookies from rolled dough.
5. Dough cutter = also known as bench scraper, it is use to cut dough for
scaling.
6. Pastry wheel = it has a very sharp, round; nickel-plated blade attached to
a handle, the wheel rotates as it uses in cutting pastries.

D. Miscellaneous Tools These tools are vital for you to have since they make the
process of baking more efficient and easier.

1. Metal spatula = also known as pallet knife; used to loosen cookies from the
pan and level the flour.
2. Rolling pin = it rolls out, flattens or thins the dough or paste. It may be
made of wood, metal, marble or synthetic materials.
3. Pastry brush = made of soft, flexible nylon or unbleached hog bristles. It is
used for greasing pans, applying egg wash and for brushing crumbs.
4. Parchment paper = it is grease- resistant, non-stick, heatproof, quick-
release coated paper. It is used as lining baking pans and making piping
cones for décor work.
5. Pastry mat = made of highly-quality, food-grade silicone and fiber glass. The
markings allow for accurate sizing and reduce the risk of over-processing
the dough
6. Wire Cooling Racks = they have feet that raise them above the counter so
that moisture does not collect under cooling baked goods. These racks can
also be used for glazing and confectionery works.

E. Baking Tools These are used to bake pastries inside the oven. Most chefs use
all kinds of pans in making pastries, but there are commonly used specific
pans.

1. Pie pan = used in baking different kinds of pies

2. Tart molders = comes in different sizes and design and are used in baking
individual tart. 3. Cookie sheets = used in baking cookies, and holds
tart molders.

F. Decorating Tools These are used in applying glazes, filing and decorating
baked pastries.

6
 d. 200º C - 400º F

http://www.com/use-an-Oven#image:Use-an-Oven-step-4-preview.jpg.

4. Learn the temperature ranges

Fahrenheit Celsius Gas Mark gas mark 1-cool

275º F 140º C gas mark 2 gas mark 3-
300º F 150º C very moderate gas mark 4-
moderate gas mark 5 gas
325º F 165º C
mark 6-moderately hot
350º F 180º C
gas mark 7- hot gas mark
375º F 190º C 9 gas mark 10- very hot
400º F 200º C
425º F 220º C
450º F 230º C
475º F 240º C
5.Preheat the oven prior to cooking
= it is important to always preheat the oven to the temperature
suggested by the recipe. This will ensure that the oven is at the right
temperature when you put the item for cooking.

5 Tips for Baking in a Gas Oven

https://www.thekitchn.com/5-important-things-to-know-about-baking-in-a-gas-oven-
226270.
1. Always rotate your trays.

8
Gas ovens are notorious for having hot spots, so it's important to rotate your trays
once or twice during cooking (depending on the length of cooking). This ensures
that everything bakes as evenly as possible.

2. A pizza stone helps provide even cooking.

A pizza stone holds heat incredibly well and also radiates it outward at a very even
and steady rate. This makes it a great tool not just for making pizza, but also for
turning your cranky gas range into a sure and steady cooking machine.

3. Move trays higher for browner tops.

Since gas ovens tend to have more ambient moisture in the air, it can take longer
for foods to brown on top. If you'd like to speed along the browning process, move
the tray to the top of the oven or place a second baking sheet directly above the
food.

4. Turn up the heat for more crisping action.

If crunchy and crispy is your aim, try turning up the oven heat by 25°F. The
cooking time will change slightly, so be attentive toward the end of cooking and
look out for visual and aromatic cues that your food is done.

5. Avoid dark metal cookware.

Avoid using dark-colored metal bake ware, as this absorbs more heat and speeds up
cooking. Light-colored metal, glass, and silicone are great choices for baking in gas
ovens and will reduce the risk that the bottoms burn.

2. Refrigerator/ Freezer = use to store ingredients and bake product to

9
Pastry case= uncooked or blind baked pastry container used to hold savory or
sweet mixtures.
Pastry cream = a thick sauce containing eggs and starch.
Patisserie = the trade of making pastries as well as a shop where pastries are sold.
Pie = defined as a crust topped with a sweet or savory filling.
Pinch = using your finger to press something (usually a pie dough) together.
Pipe out = to press the mixture out from the piping out.
Rolling boil = this happens when a liquid or mixture has reached its boiling
temperature and produces a lot of bubbles.
Rubbing in = the process of crumbling and breaking butter into small pieces
rubbing them into flour.
Score = slashing the surface of food as bread/pie dough using a sharp knife.
Shelf- life = the length of time that a product is usable, fit for consumption, and
can be kept.
Tart = a flat, baked item consisting of a pastry and a sweet or savory topping; it is
like pies without top crust.
Three- fold = laminated dough is folded into thirds like a letter to incorporate the
fat and produce multiple layers of fat and dough.
Tulipe = a thin, crisp cookie molded into a cup shape.
Viennoiserie = commonly used as term for many laminated and puff and choux-
based pastries.

Wow! Thank you for reading and understanding it. I hope you
learned from the reading you did a while ago. I supposed you are
now excited to explore on another activity. Are you ready?

Illustrated by: CLPC

What’s More

Activity 1. Guess What?

Directions: Identification: Supply the correct word to complete the sentences. Write
your answer on a separate sheet of paper.

1. I use this tool to measure large amount of All-purpose flour in making my pie.

2. I need 1 teaspoon of salt, what measuring tool will I use?

3. If you mix butter into the flour using fork or pastry blender to make a crust,
what do you call this process or mixing?

10
4. I have to poke small holes to the dough to prevent the pie from bulging on top,
what do you call this process?

5. I use this, with the pastry mat to flatten and roll the dough to achieve uniform
thickness of pie crust.

6. I use this to apply egg wash on top of the pie crust to achieve a golden yellow
crust when baked.

7. I use this to loosen baked cookies from the cookie sheets.

8. When I crumb and break the butter into small pieces and rub this into the
flour, what is this process?

9. This happens when mixture of water and flour has reached its boiling
temperature and produces a lot of bubbles.

10. I put this first in the pan before putting my mixture of ingredients to easily
removed when baked.

11. I need this to totally cool down my baked pastries.

12. In making this thick sauce you need fruit or vegetable purees, what is this?

13. I need these in making my pine apple tarts.

14. I use this to slice evenly my freshly baked meaty pizza pie.

15. I used this to measure the temperature my boiled sugar.

What I Have Learned

Fill in the blanks

Directions: Fill in blank with appropriate term to complete the idea of each
sentence.

1. ________________are used to achieve an exact amount of ingredients written in a

recipe.

2. ________________ are used in combining ingredients together.

3. Baking the crust of a pie/tart without the filling is called ___________________.

11
4. These rich and delicate baked products that usually consist of a dough or
pastry and a filling is ______________________.

5. ________________ are used in applying glazes, filing and decorating baked

pastries.
6. Avoid using _____________ metal bake ware because it absorbs more heat and
speeds up cooking

7. ________________ are notorious for having hot spots, so it's important to rotate
your trays once or twice during cooking

8. It is important to always _____________ the oven to the temperature suggested

by the recipe.

9. __________________ are used in slicing, chopping, cutting and paring fruits,

vegetables and other ingredients.

10. _________________ is best for quick and high temperature cooking.

What I Can Do

Directions: Explain the following, write your answer in a separate sheet of

paper. (5 points each) Rubrics will be used to assess your answers.

1. How are you going to use pastry brush and parchment paper in lining your
pan?
______________________________________________________________________________
________________________________________________________________________
2. How are you going to manipulate your oven in baking, what are the
precautions that you will bear in mind in using your oven?
______________________________________________________________________________
________________________________________________________________________
Rubrics
Criteria 4 3 2 1
Clarity Exceptionally Generally Lacks clarity Unclear cannot
clear and easy clear and and difficult to understand
to understand quite easy to understand
understand

12
Comprehensiveness Thorough and Substantial Partial or not Misunderstanding
comprehensive explanation comprehensive or serious
explanation explanation misconception on
the explanation

Relevance Highly relevant Generally Somewhat Irrelevant

relevant relevant

Assessment

Multiple Choice: Choose the letter of the best answer. Write the chosen letter on
a separate sheet of paper.

1.Which of the following is needed to apply frosting design in pastries?

a. Pastry bag c. Rubber scrapper
b. Pastry tips d. Spatula
2. The thin and crisp cookie molded into a cup shape is _______________.
a. Cookies c. Tart
b. Pastry d. Tulipe
3. What baking product is made of more fat than flour and small amount of
liquid?
a. Cookies c. Tart
b. Pastry d. Tulipe
4. Which of the following means slashing the surface of pie dough with a knife?
a. Cutting c. Slicing
b. Score d. Trimming
5. What do you call the length of time that a product is fit for consumption?
a. Duration c. Self-life
b. Expiration d. Timeline
6. To fold laminated dough into thirds like a letter to incorporate fats
is____________.
a. Four fold c. Three- fold
b. One- fold d. Two- fold
7. What is tool is use to monitor baking time?
a. Candy Thermometer c. Timer
b. Oven Temperature d. Weighing scale
8. Every oven should have to ensure the proper temperature of food inside the
oven.
a. Candy thermometer c. Timer
b. Oven temperature d. Weighing scale
9. Whichis used to slice and chopped fruits in making fruit pie?
a. French knife c. Knife

13
 b. Fruit cutter d. Pastry blender
10. What tool is used to measure baking soda needed in a recipe?
a. Heater c. Measuring spoon
b. Measuring cup d. Weighing scale
11. Theblind baked pastry container that used to hold savory or sweet mixtures is
a. Pastry c. Pastry case
b. Pastry bag d. Tulipe
12. The tool use to stamp out individual cookies from rolled dough is
a. Cookie cutter c. French knife
b. Dough cutter d. Pastry wheel
13. The process of baking the crust pie in advance without the filling or topping is
a. Baking c. Pre-cooking
b. Bake blind d. Pan-frying
14. Which tool is most often used to cover cookie sheets in baking?
a. Foil c. Pastry bag
b. Parchment paper d. Pastry mat 15. Pinching the sides and tops of pie
or tart crust is
a. Crimp c. Pinching
b. Crumbing d. Rubbing

How did it go? Were you able to get them correctly?

Illustrated by: CLPC

Additional Activity
Give a brief definition of the following. Write your answer on a
separate sheet of paper.

1. Cut in = ____________________________________________________________________
2. Crème patisserie = __________________________________________________________
3. Docking = __________________________________________________________________
4. Flaky = _____________________________________________________________________

14
5. Laminate = _________________________________________________________________
6. Pastries = __________________________________________________________________
7. Patisserie = ________________________________________________________________
8. Pinch = ____________________________________________________________________ 9.
Rolling boil = ______________________________________________________________
10. Rubbing = ________________________________________________________________

Congratulations, you can move

now to the next module.

Illustrated by: CLPC

15
Answer Key

16
References
Kong, Aniceta S. et.al.,Bread and Pastry Production Manual. Sunshine Interlinks
Publishing House, Quezon City, Philippines.2016, p.80-85

Christensen, Emma. “5 Important Things about Baking in a Gas”. December 7,

2015. Access on July 4,2020 from https://www.thekitchn.com/5-important-
things-to-knowabout-baking-in-a-gas-oven-226270.

Access on July 4, 2020 from htt://quizlet.com>culinary-and-technical-terms-

reltaedto-pastry-production

17
 For inquiries or feedback, please write or call:
Department of Education - Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex
Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: [email protected] * [email protected]
Telefax: (632) 8634-1072; 8634-1054; 8631-4985

Email Address: [email protected] * [email protected]