Scribd
Upload
34 views1 page

PG-Grafmax SP

This technical data sheet provides information about PG-Grafmax SP graphite flange gaskets. It lists the temperature and pressure ratings, as well as pH range. The gaskets are made of pure graphite, and can be impregnated with anti-stick coating on both sides. They feature a tanged 316L stainless steel insert and are intended for use in industrial piping and machinery flanges.

Uploaded by

azeem bilal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

PG-Grafmax SP

This technical data sheet provides information about PG-Grafmax SP graphite flange gaskets. It lists the temperature and pressure ratings, as well as pH range. The gaskets are made of pure graphite, and can be impregnated with anti-stick coating on both sides. They feature a tanged 316L stainless steel insert and are intended for use in industrial piping and machinery flanges.

Uploaded by

azeem bilal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Company Certified

TECHNICAL DATA SHEET - CST 0510/01 - 23/07/2003 ISO 9001:2008

PG-Grafmax SP

TECHNICAL DATA

T °C -200 // +450 (1) / +550 (2)


P bar 100
Ph 0 ÷ 14 (3)

1) with low oxidizing fluids or gases - 2) with steam and not oxidizing fluids or gases - 3) except strong oxidizing fluids or gases

Composition
• Pure graphite
• Impregnated with anti-stick on both side on demand
• Tanged SS316L Insert
Features
Flange gaskets for industrial piping and machines

PLANIGRAPH LGRF technical data 1.50 mm thk


Graphite density gr/cm3 1.00

Ash content % < 2.00

Reinforcing sheet material S.Steel 316L

Reinforcing sheet thickness mm 0.10

Reinforcing sheet number No. 1

Relaxation stress 16h, 300°C, initial stress 50 N/mm2 N/mm2 > 45

Compressibility % 30 - 40

Recovery % 15 - 20

Maximum assembly load under service conditions N/mm2 140

Available sizes : (mm) 1.000 x 1.000 and 1.500 x 1.500; (inch) 40” x 40” and 60” x 60”
Available thickness: (mm) 1,0 ÷ 1,5 ÷ 2,0 ÷ 3,0; (inch) 3/64” ÷ 1/16” ÷ 5/64” ÷ 1/8”; other thickness available on demand.

You might also like