SM7B
SM7B
Overview
The SM7B is a selectable frequency response microphone that delivers warm and smooth audio in close-proximity studio and vocal applications.
Optimized shielding from external electromagnetic hum, along with internal shock mounting, external windscreens and adjustable bass roll-off and mid-
range emphasis response settings provide clean, consistent reproduction.
Features
• Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
• Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
• Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
• Internal “air suspension” shock isolation virtually eliminates mechanical noise transmission
• Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
• Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
• Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
• Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration
of off-axis sound
• Rugged construction and excellent cartridge protection for outstanding reliability
SM7B Includes foam windscreen, close-talk windscreen, and locking yoke mount.
Specifications
Type Dynamic
Frequency Response 50 to 20,000 Hz
Polar Pattern Cardioid
Electromagnetic Hum Sensitivity 60 Hz: 11 dB
(Typical, Equivalent SPL/milliOersted) 500 Hz: 24 dB
1 kHz: 33 dB
Impedance 150 Ω for connection to microphone inputs rated at 19 to 300 Ω
Output Level (at 1,000 Hz) Open circuit voltage: – 59.0 dB (1.12 mV)
0 dB = 1 volt per Pascal
Switches Bass rolloff and mid-range emphasis: Slotted response selector switches
Cartridge Shock Mount Internal air-suspension shock and vibration isolator
Microphone Connector Three-pin professional audio (XLR)
Swivel Assembly Integrated, captive nut for ease of attachment to stand, fits 5/8 in.–27 thread
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Case Dark gray enamel aluminum and steel case with dark gray foam windscreen
Weight 765.4
+20
+10
dB
–10
–20
2 3 4 5 6 7 89 2 3 4 5 6 7 89
20 50 100 1000 10000 20000
Hz
250 Hz 2500 Hz
500 Hz 8300 Hz
1000 Hz