C.V Skumar D.G.M Aarvee LTD Updated 5.april.2022 Updated
C.V Skumar D.G.M Aarvee LTD Updated 5.april.2022 Updated
CAREER;- An accomplished “CIVIL ENGINEER “ for Highway section in object oriented Execution ,Design and
analysis with extensive experience in the full life of cycle of Civil Engineer, Highway Engineer Including requirements
definition Prototyping Proof of concept, design, interfaces implementation Testing and Maintenance.
KEY QUALIFICATION
I am a Civil Engineering Graduate with more than “Twenty Years” (20) of extensive experience in the
Construction Supervision and Project Management of Highways (Four lanes) including flexible
pavements & major bridge projects, Minor Bridges, Underpass & Culverts etc. funded by World Bank,
ADB and other lending agencies. He has rich experience in execution & consultancy supervision of all kinds
of civil engineering works and review of construction design drawings, approval of working drawings,
project monitoring and planning & scheduling CPM/ PERT activities for permanent works, evaluation of
Contractors’ resources; Preparing Quality Assurance Manuals; Materials Testing & Certification,
Approval of Works; Quality Control as per AASHTO/ ASTM/ BS/ MORTH/ IS Standards including its
Special Applications and Contract Technical Specifications, Variation Orders, Site Instructions, Interim
payment Certificates, sub-contractor bills approval etc. He is an expert in Contract administration,
Contract Management, Quantity Surveying, Project Execution, Tendering, and Preparation of Budget &
Cash Flow Statements, Costing, and Preparation of Programmes and Monitoring the works for Project
Execution. He has sufficient expertise in completing the assignments with in the schedule and budget. He has a
proven track record of developing procedures, policies, standards and implementing quality control
measures to maintain the quality.
He has got sufficient experience in World Bank & NHAI funded projects and
thus well versed with ICB norms & FIDIC conditions of contract & international best practices including
MORT&H Specifications including thorough Knowledge of modern plants,equipmets & machineries for
dressing of raw materials and the state of the art construction equipments used for advanced technology
construction purposes.
Fixation of alignment including both horizontal and vertical curves in the field and take Pre-work
measurement at site.
Review Contractor's work programs, work methods, working drawings and temporary works proposals
and make recommendations accordingly.
Check Contractor's traffic management and safety plans and ensure that he complies with them.
Preparation of Bill of Quantities, Cost Estimate. Rate analysis. Preparation Bid documents and Bid
evaluation report.
Conduct all necessary surveys for final design & execution of works.
Assist the SRE in construction supervision and leading site teams and all other activities.
Liaise with RHD field based staff and keep them informed of the construction activities.
Attend progress review meeting and convene regular site meetings.
Assist in implementing Consultants management systems covering supervision. testing, measurement and
recording.
Check setting out of the works and issue necessary instruction to the Contractor with approval of SRE.
Examine & verify Contractor's work in the field and check work volume and certify Contractor's interim
and final payment certificate and recommend to Team Leader for progress & Final payment.
Assist SRE in issuing Variation Orders. Time extension and permission to sublet Works after RHD
approval.
Keep records of test results and Test certificates and communications.
Monitor quality of works and materials and report on construction progress.
Identity improper works and make recommendations to the SRE accordingly.
Check and certify as build drawing prepared by the Contractor.
Assist the SRE in preparing monthly progress report.
Assist the SRE to review, Contractor's dispute or claim, if any.
Perform any other activities for successful completion of work and entrusted by the SRE
COMPUTER SKILL:
Knowledge of Computer Software like MS Office &Auto CAD.
EMPLOYMENT RECORDS:- List of Projects, which demonstrates all the abilities/Characteristics above
are listed below:-
(1)Employment Record : M/S AARVEE ASSOCIATES ARCHITECTS ENGINEERS & CONSULTANTS
PVT . LTD. HYDERABAD
Period : 1st.Oct 2018 to Till Date
Post Held : HIGHWAY ENGINEER /D.G.M
Project Name :- Consultancy Services for Authority’s Engineer For Supervision of Development of “Agra to
Lucknow (Pkg-II) 53+500 To 115+500 Access Controlled Expressway (Green Field) Project” on EPC Basis.
DESCRIPTION OF DUTIES: -As HIGHWAY ENGINEER Work carry out detail is checking & Setting out data
of work including line level and layout to ensure conformity with drawing. Carryout of execution of all works as
per approved method statement of various item of work and ensure quality as per requirement. Setting up and
organization of Laboratory and on-site testing for Soil and Bitumen, Investigation of barrow materials for
embankments, Investigation of minor and major bridges for foundations, Investigation of quarries for materials,
Preparation and implementation of Quality Control aspects, Assistance in location and supervision of establishment of
aggregate crushers and bituminous mix plants.
Making the list of materials as per BOQ and also checking of availability in the quarry and suggesting alternate
arrangements.
Checking of Material Specification as per working drawings, DPR and Contract drawings.
Preparation of working drawings as per site condition with reference to IRC.
Recording of measurements & Implementation of quality control monitoring system and reporting formats.
Checking field measurement and survey details, interpretation of technical specifications and contract provisions,
Checking the day-to-day progress of Structures’ works as per the Quality standards and specifications.
Study and Review of Reports and Tender Drawings
Maintain day-by-day project diary to record all major events of the project.
Conducting initial survey and preparation of revised estimate with proposals.
Finalizing Alignment of roads and minor structures.
Executing Pipe culverts and slab Culverts according the MOST Specification.
Programming and monitoring daily progress along with AHE’s, FE’s and AME’s.
Monitoring of work’s progress with contractors and client.
Checking of Running Account bills every Month those prepared by ARE’s and FE’s.
Preparation of Sub-Grade, GSB, WBM, and B.T layers as per MOST specification and getting approval for the
same from the client.
To review design reports, specification and tender documents for pavement works.
• To ensure project quality system is applied during pavement construction. Understanding of pavement design
methodologies and method of construction.
• Ensure very close and clear coordination of his team activities with the other construction supervision staff.
• Pavement evaluation using available technology and equipment.
• Review of method statement submitted by the contractor.
• Understanding pavement layout (horizontal and vertical alignment), singing, pavement marking and street
furniture.
• Review and approve (make recommendation for approval by SRE) of all submitted materials by the contractor.
• Understanding of General, Project specification, tender documents and international standards (AASHTO, BS,
and ASTM, etc.).
• Understanding Operating Procedures (NCR, ITP, RIFT, IR, etc.).
CV of Sanjay Kumar Page 3/12
• Supervise, participate and direct sampling and testing\analysis of all pavement materials per the contract and the
specifications.
• Maintain records of test results and all taken corrective actions.
• Provide inputs on changes/variations/claims related to pavement, if any.
• Liaison and coordination with client, concerned authorities, consultant, sub-contractor and contractor.
Inspecting all the roads covered under UPEIDA along with sub-staff and client.
Conducting Field-tests whenever necessary and approval of the material and quality.
Executing Pipe culverts and slab Culverts according the MOST Specification.
Preparing Variation Orders. & Submission of Final Bill with all relevant details road wise/ package wise.
Preparing and submitting constructed structure’s drawings to client.
DESCRIPTION OF DUTIES: -As a RESIDENT ENGINEER Work carry out detail is checking & Setting out
data of work including line level and layout to ensure conformity with drawing. Carryout of execution of all
works as per approved method statement of various item of work and ensure quality as per requirement. Setting
up and organization of Laboratory and on-site testing for Soil and Bitumen, Investigation of barrow materials for
embankments, Investigation of minor and major bridges for foundations, Investigation of quarries for materials,
Preparation and implementation of Quality Control aspects, Assistance in location and supervision of establishment of
aggregate crushers and bituminous mix plants.
Making the list of materials as per BOQ and also checking of availability in the quarry and suggesting alternate
arrangements.
Checking of Material Specification as per working drawings, DPR and Contract drawings.
Preparation of working drawings as per site condition with reference to IRC.
Recording of measurements
Implementation of quality control monitoring system and reporting formats.
Checking field measurement and survey details, interpretation of technical specifications and contract provisions,
Checking the day-to-day progress of Structures’ works as per the Quality standards and specifications.
Supervision of open foundations of Minor Bridges and RCC Box Culverts.
Supervision of different types of sub structures (Wall and Circular type).
Supervision of different types of pier caps, square pedestals, formwork.
Study and Review of Reports and Tender Drawings
Responsible for testing of different material like soil, sand, aggregate, cement, bitumen for items involved in Road
works if need arises as per the MOST & IS specifications. Responsible for checking and providing approval of design
mixes (JMF) for GSB, BM, DBM, BC with PMB-40, etc. in consultation with the material engineer.
Also, responsible for checking of cross sections, attending technical quarries submitted by the concessionaire.
Responsible for close monitoring and implementation of the road safety measures as per safety manuals referred during
the construction activities. Review the safety measures adopted by the concessionaire during execution of work. Review
the progress reports submitted by the concessionaire and Prepare weekly, monthly reports on the progress of works.
Responsible for supervision of the project under FIDIC conditions of contract covering the assignments.
Review of the detailed design and recommending necessary changes and modifications as per the requirements.
Examination and certification of the construction drawings.
Preparation of Quality Assurance Plan, Inception Report, various Review Reports Supervise the works on day
to day basis and to do check the material and workmanship of the works. Inspection Daily activity describe in
R.F.I every day.
Provision towards quality assurance and carry out quality control tests. Identify Construction delays and
recommend to the NHAI the remedial measures to expedite the progress.
Verify the safety measures provided for the traffic and project workers. Evolve MIS and provide it to the NHAI.
To direct the Concessionaire in all matters concerning construction safety and care of the works and if required,
to request the concessionaire to provide any necessary lights, guard, fencing etc.
Responsible for supervision & monitoring the progress of bridge work, supervision, scrutiny, approving the
final setting out by the contractor, reviewing drawings, review of Contractors methodology of construction, All
other activities as per provisions of the Concessionaire Agreement.& also other responsible for construction of
Road Works as per MOST &IRC specifications
Responsible for supervision of the project under FIDIC conditions of contract covering the assignments.
Review of the detailed design and recommending necessary changes and modifications as per the requirements.
Examination and certification of the construction drawings.
Preparation of Quality Assurance Plan, Inception Report, various Review Reports Supervise the works on day
to day basis and to do check the material and workmanship of the works. Inspection Daily activity describe in
R.F.I every day.
To review design reports, specification and tender documents for pavement works.
To ensure project quality system is applied during pavement construction. Understanding of pavement design
methodologies and method of construction.
Ensure very close and clear coordination of his team activities with the other construction supervision staff.
Pavement evaluation using available technology and equipment.
Review of method statement submitted by the contractor.
Understanding pavement layout (horizontal and vertical alignment), singing, pavement marking and street
furniture.Review and approve (make recommendation for approval by SRE) of all submitted materials by the
contractor.Understanding of General, Project specification, tender documents and international standards
(AASHTO, BS, and ASTM, etc.).
Duties & Responsibility:-Supervise the works on day to day basis and to do check the material and workmanship of
the works. Inspection Daily activity describe in R.F.I every day. Provision towards quality assurance and carry out
quality control tests. Process design, calculations, equipment sizing, preparation of purchase specifications, technical
evaluation of the bids, and participation in technical meetings with vendors and clients/consultants, vendor document
review/approval and site technical support. Analysis and design of Steel and RCC structures. Preparation of Technical
Specifications and BOQ for Tender purpose Keywords: Process design, calculations, equipment sizing, preparation of
purchase specifications, technical evaluation of the bids, STAAD PRO, Soil Mechanics, Pile / Machine Foundations,
Water Retaining Structure, RCC, Power, Structural, BOP. Identify Construction delays and recommend to the NHAI the
remedial measures to expedite the progress. Verify the safety measures provided for the traffic and project workers.
Planning and execution of Asphalts, WMM, GSB&Earthworks.Machinery allocation utilization. Act as mentor to less
experienced team members, providing technical guidance and advice. Co-ordinate work with multi-disciplinary teams in
a global environment. Encourage the promotion of, and compliance with, quality, safety and environmental systems.
Assist in the development, promotion and implementation of company technical strategies. Interface with clients on
project technical, commercial and progress matters. Ensure capture of key project and technical knowledge. Execution
Duties & Responsibility;-Supervise the works on day to day basis and to do check the material and workmanship of the
works. Inspection Daily activity describe in R.F.I every day. Provision towards quality assurance and carry out quality
control tests. Identify Construction delays and recommend to the NHAI the remedial measures to expedite the progress.
Verify the safety measures provided for the traffic and project workers. Evolve MIS and provide it to the NHAI .To
direct the Concessionaire in all matters concerning construction safety and care of the works and if required, to request
the concessionaire to provide any necessary lights, guard, fencing etc.Responsible for supervision & monitoring the
progress of bridge work, supervision, scrutiny, approving the final setting out by the contractor, reviewing drawings,
review of Contractors methodology of construction, All other activities as per provisions of the Concessionaire
Agreement.
BRIDGE WORK:-Supervise the works on day to day basis and to do check the material and workmanship of the
works. Inspection Daily activity describe in R.F.I every day. Provision towards quality assurance and carry out quality
control tests. Identify Construction delays and recommend to the NHAI the remedial measures to expedite the progress.
Evolve MIS and provide it to the NHAI .To direct the Concessionaire in all matters concerning construction safety and
care of the works and if required, to request the concessionaire to provide any necessary lights, guard, fencing etc.As
A.H.E, responsible for supervision & monitoring the progress of bridge work, supervision, scrutiny, approving the final
setting out by the contractor, reviewing drawings, setting up quantity control procedures & review of Contractors
methodology of construction, measurement of completed works & maintaining construction records, checking
contractor’s Batching plant, Crusher & other equipment needed for bridges. All other activities as per provisions of the
Concessionaire Agreement.
(9) From JUNE, 2006 to Oct. 2007
Employer :- M/S Scottwilson Kirkpatrick (IND) Pvt Ltd. New Delhi
Position Held :- FIELD ENGINEER
CLIENT :- RIDCOR Funded by IL&FS Transport Network Ltd.
PROJECT NAME :- Consultancy services for Maintenance for –HK-2 of Kishangarh to
Ratangarh Mega Highway Project in the state of Rajasthan.
PROJECT COST :- INR 233crores
ROAD LENGTH :- 206 KMS
JOB RESPONSIBILITY :- As A FIELD ENGINEER, I am responsible for construction of Road
Works as per MOST & IRC specifications. Day to day coordination with client for execution, material testing and
quality control, setting up of testing laboratory at site, Management of manpower, material and equipment; Making of
work methodology for various construction activities for the above project for minimum use of manpower material and
equipment. During the project the other activities like Earthwork, GSB, WBM, and DBM, BC are executed.
BRIDGE &ROB WORK:-Controlling all the aspects of construction of bridge section & Highway Section.
Maintaining the utilities record, permanent and temporary obstructions record and monitor their proper stock-yard.
Reporting to the PM in respect of all the Structure & Highway activities in requisite format on daily basis. Entry into the
measurement book on weekly basis and cross checking the bill submitted by the contractor. Organizing the construction
team at site in a systematic manner efficiently. Marking the alignment and fixing the centerlines and diagonals of
structure. Checking the foundation depths, width, length and type of soil .Allotting the works to subcontractors based on
performance and quality. Maintaining cement register, daily site order records and measurement book. Checking the
quality of works like maintaining water cement ratio, concrete mixing machine, vibrators for compaction, checking the
slumps, reinforcement details, etc.Preparing bill as per execution and agreement.
JOB RESPONSIBILITY : - As a field Engineer Responsible for execution of Work as per drawing and
specification. Monitoring day to day activities & Condition of field test as per codel stipulation and Bill Preparation.
Assisting the team leader with final reporting, responsible for identity of borrow area conducting test on material. To
check there suitability for construction, ensure and implant QA/QC procedure. Maintain all the records to the test
Condition responsible for the maintenance of weekly progress records, deployment of plant and machinery, giving
Layout of works and levels required at every stage of work. Controlling all the aspects of construction of bridge section
& Highway Section.Maintaining the utilities record, permanent and temporary obstructions record and monitor their
proper stock-yard. Reporting to the PM in respect of all the Structure & Highway activities in requisite format on daily
basis. Entry into the measurement book on weekly basis and cross checking the bill submitted by the contractor.
Organizing the construction team at site in a systematic manner efficiently Marking the alignment and fixing the
centerlines and diagonals of structure. Checking the foundation depths, width, length and type of soil .Allotting the
works to subcontractors based on performance and quality. Maintaining cement register, daily site order records and
measurement book. Checking the quality of works like maintaining water: cement ratio, concrete mixing machine,
vibrators for compaction, checking the slumps, reinforcement details, etc.Preparing bill as per execution and agreement.