Scribd
Upload
663 views2 pages

Personal Protective Equipment

Personal protective equipment is necessary for electrical work to protect workers from injury. Basic PPE includes cotton clothing with long sleeves, a helmet or hard hat, goggles, gloves, hearing protectors, and safety footwear. Additional safety equipment for live electrical work includes insulated gloves and matting, insulated ladders, rescue rods, voltage detectors, and flame-resistant clothing that self-extinguishes to prevent severe burns from arc flashes.

Uploaded by

Manjunath Gajendranath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
663 views2 pages

Personal Protective Equipment

Personal protective equipment is necessary for electrical work to protect workers from injury. Basic PPE includes cotton clothing with long sleeves, a helmet or hard hat, goggles, gloves, hearing protectors, and safety footwear. Additional safety equipment for live electrical work includes insulated gloves and matting, insulated ladders, rescue rods, voltage detectors, and flame-resistant clothing that self-extinguishes to prevent severe burns from arc flashes.

Uploaded by

Manjunath Gajendranath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Personal Protective Equipment (PPE) for Electrical Works

To protect the employee’s body from injury Personal Protective Equipment (PPE) must be
used.

Basic PPE consists of:

 Cotton protective clothing with long sleeves

 Helmet or hard hat

 Goggles for eye protection

 Gloves (leather or rubber)

 Hearing protectors

 Safety footwear

 Insulated Gloves – Insulated gloves will prevent electricity from traveling into your
hands should there be an exposed wire, short circuit, or other issue. Rubber gloves
and leather gloves are used with appropriate voltage rating.

 Insulated Matting – Insulated matting will put a protective layer between the
employee and the floor. This is helpful when working at switchboards, transformers,
and other high-voltage areas. It can help prevent electricity from traveling up from the
floor into the person’s body, as well as eliminating a path for electricity to travel
through the body and out to the floor. Mat thickness should be a minimum of 4mm to
10 mm depending on the working voltage.
 Insulated Ladders – Insulated ladders won’t transmit electricity into the person who
is using it. If a normal metal ladder accidentally touches a live electrical wire, it can
be devastating. With the insulated ladder, this isn’t an electrical concern.

 Rescue Rods – In the event that someone is being electrocuted, people will be
tempted to rush in to save them. Unfortunately, this will only lead to them becoming
electrocuted as well. Having a rescue rod present will allow those in the areas to pull
the victim to safety, or push the source of the electricity away.

 Voltage Detectors – Even after a power source has been removed, there can still be
electricity in a system because of capacitors. A voltage detector will show the level of
electricity in a given system at the current time, so employees won’t mistakenly begin
working on a system until all power has been eliminated.

 Shoes – Safety footwear should be routinely worn in all working areas and the shoes
or boots should have non-slip soles.

 Goggles – Eye protection should be worn when working with hazardous fluids,
particularly mineral oil. Employees shall wear goggles for the eyes and face shield for
face whenever there is a danger of injury from electric arcs, flashes, or from flying
objects resulting from an electrical explosion. to prevent splashes into the eye.

 Hearing protectors – are required when working in a noisy situation.

 Helmet or hard hat – Nonconductive hardhats shall be worn whenever there is a


danger of head injury.

 Under Garments – Employees are responsible for providing compliant under layers
of clothing that must be made from natural fibers. Non-melting flammable garments
(i.e. cotton, wool, rayon, silk, or blends of these materials) may be used as under
layers beneath AR apparel.

 AR/FR Apparel: Protecting Electrical Workers: Electrical workers face the risk of
unexpected arc flash incidents in their job. When arc flashes occur, the most severe
injuries often are the result of non-flame-resistant clothing igniting and continuing to
burn, causing far more severe burn injuries than the arc flash itself. The use of
appropriate arc-rated (AR), flame-resistant (FR) clothing has a proven track record of
protecting workers and saving lives.
AR/FR clothing plays two key roles in protecting electrical workers against burns:

o Self-extinguishes to mitigate burn injury when the source of ignition is


removed.

o Provides insulation to reduce probability of a second-degree burn.

Wearing AR/FR daily wear is the simplest, most effective solution.

You might also like