Ensco Asia & Pacific Rim

5 Temasek Boulevard
#11-01 Suntec Tower 5
Singapore 038985
Phone: +65 6622 8900
Fax: +65 6820 0230
E-mail: [email protected]
www.enscoplc.com

ENSCO 108
GENERAL INFORMATION HOISTING EQUIPMENT
Flag: Liberian Cranage: 3 x Favco Model 7.5/10K 10 ton, whip line
Previous Name(s): _ 45.4MT main line; diesel hydraulic.
Year Built: 2007
Builder: Keppel FELS, Singapore
Upgrade: 2009
CAPACITIES
Design: Keppel FELS KFELS MOD V B Class Variable Deck Load: 9,000 Kips (drilling)
“Bigfoot” Cantilever Load: 2,300 Kips
Classification: ABS A-1 self-elevating MODU Total Drilling Load: 2,300 Kips
Tubulars in Pipe Rack: 30,000ft 5 ½” DP plus BHA
Liquid Mud: 3,891 bbl
MAIN DIMENSIONS Bulk Mud/Cement: 11,100 ft3
Length: 234ft Sacks: 5,000 sacks
Breadth: 208ft Drill Water: 20,089 bbl
Depth: 25ft Potable Water: 2,000 bbl
Legs: 3 x triangular 517ft Fuel Oil: 3,384 bbl
Leg Spacing: Longitudinal leg center 129ft, transverse leg Others: Trip Tank 2 x 37 bbl.
center 142ft.
Cantilever: Min. 19'6", Max. 70ft from stern to rotary
centerline; Max. 15ft rotary displacement to
WELL CONTROL SYSTEMS
either side of longitudinal centerline; 50' 6" x BOP: Onboard: 13-5/8” 10K Cameron U (1 x Double & 2 x
30ft live drilling area aft of hull. Single) BOP with 5k Shaffer Annular Onshore: Varco SLX 18 ¾”
Spud Cans: 53ft diameter x 19ft high. 10,000Psi 3 ram BOP stack (double & single); Shaffer 18 ¾”
Deck Area: Main deck storage capacity 6,100ft2. 5,000 psi annular; Varco SLX 13 5/8” 15,000 psi 4 ram BOP;
Shaffer 13 5/8” type S 10,000 psi annular.
BOP Handling: 2 x 75t tandem BOP hoists.
DRAFT AND DISPLACEMENT Control System: Shaffer Model # 20028424, 3,000 psi, 42
Transit Draft: 16ft bottles x 11 gal capacity.
Displacement: 35,260 kips. (Transit) Diverter: ABB Vetco KFDJ 49 ½” 2,000psi with 2 x 12" remote
controlled valves & 1 x 14" remote controlled valve. 9 bottles x
MACHINERY 11gal capacity.
Main Power: 5 x Cat 3516-B diesel engine each driving 1 Choke and Kill: Cameron.
x Cat SR4B 1,383 KW generator; total 9,275 HP.
Power Distribution: 4 x M&I 600 V, 2,200A SCR system for MOORING
mud pumps; 4 x M&I variable frequency drives for AC top drive Winches: 4 x LeTourneau W-1500
and AC Drawworks. Wire: 2,000ft x 1 ½”
Emergency Power: 1 x Cat 3508-B diesel engine rated at (914 Anchors: 4 x Flipper Delta, 5,000 kg
HP) driving 1 x Leroy Somer 600 KW generator
HELIDECK
OPERATING PARAMETERS S-92; 73ft diameter; 11.9mT
Water Depth: 350ft – 400ft
Drilling Depth: 30,000ft (Maximum) JACKING AND SKIDDING SYSTEM
Leg Penetration: 25ft Keppel FELS with self-positioning fixation system.
Air Gap: 55ft-120ft subject to extending crane and
LB fall wires ACCOMMODATION
Transit Speed: 4.5kt to 5kt 120 Certified POB
Survival Conditions: At 350ft water depth: wind: 100 knots;
43ft waves; 15 sec period (with fixation system)
Criteria Design: .
ADDITIONAL DATA
DRILLING EQUIPMENT Shale Shakers: 4 x VSM - 300; 1x VSM 300 24/3 Mud Cleaner;
Derrick: Woolslayer 160ft x 32ft x 35ft; rated 3 x 12" Desander; 24 x 4" Desilter; 2 x Brandt DG-10 1,000 gpm
1,500,00 lb static hook load capacity. vacuum degasser, 200 MT conductor tensioning system, offline
Drawworks: Varco/ADS-10DT, 3,000 HP capabilities with Varco "Phantom Mousehole" rotating
Rotary: Varco/BJ RST 495, 49 ½” max opening Mousehole, Varco Foxhole Spider Mousehole, MDT/Varco flex
Top Drive: Varco TDS-8SA, 750t chair drilling controls and instrumentation.
Travelling: Varco 750t rating Watermaker: RO & Distillation Units producing up to 100cm/d.
Handling: Varco PH 100 hydraulic; Varco AR-3200 TV System: CCTV system includes cameras in derrick, under
Iron Roughneck. substructure and at shale shakers.
Cementing: Dowell Schlumberger (3rd party)
Mud Pumps: 3 x Lewco W-2215, 2,200 HP; 7,500 psi CANTILEVER CAPACITY (kips)
Drill Pipe: 5" S135 DP 19.5lb/ft NC 50; 3.5" S135 Reach +15’ 0 -15’
15.5lb/ft NC38. 70’ 627 1500 764
Max combined load & setback
HWDP: 36’ 2300 2300 2300
Drill Collars: 13 x 9.5”; 23 x 8.25”; 24 x 6 ¾”; 24 x 4 ¾”