Scribd
Upload
122 views

Dimensions of Pipes

This document provides the dimensions of welded and seamless steel pipes according to ANSI B16.10 standards. It lists nominal pipe sizes from 1/8" to 24" along with their nominal diameter, schedule numbers, and nominal wall thicknesses in millimeters. Pipes range in schedule from 10 to 160 with wall thicknesses varying based on pipe size and schedule. Only standard pipe sizes should be used in pressure piping and parts drawings according to this design directive.

Uploaded by

Arun babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
122 views

Dimensions of Pipes

This document provides the dimensions of welded and seamless steel pipes according to ANSI B16.10 standards. It lists nominal pipe sizes from 1/8" to 24" along with their nominal diameter, schedule numbers, and nominal wall thicknesses in millimeters. Pipes range in schedule from 10 to 160 with wall thicknesses varying based on pipe size and schedule. Only standard pipe sizes should be used in pressure piping and parts drawings according to this design directive.

Uploaded by

Arun babu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

ARK DIMENSIONS OF WELDED & SEAMLESS STEEL PIPES (AS PER ANSI B16.

10)
NOMINAL NOMINAL OUTSIDE NOMINAL WALL THICKNESS(MM)
PIPE SIZE PIPE SIZE DIA OF SCH. SCH, SCH, STD.WA SCH, SCH, EXTRA SCH, SCH, SCH, SCH,
SCH, 160 XX STRONG
(INCH) (NB) PIPE(MM) 10 20 30 L 40 60 STRONG 80 100 120 140
1/8" - 10.3 ----- ----- ----- 1.73 1.73 ----- 2.41 2.41 ----- ----- ----- ----- -----
1/4" 8 13.7 ----- ----- ----- 2.24 2.24 ----- 3.02 3.02 ----- ----- ----- ----- -----
3/8" 10 17.2 ----- ----- ----- 2.31 2.31 ----- 3.2 3.2 ----- ----- ----- ----- -----
1/2" 15 21.3 ----- ----- ----- 2.77 2.77 ----- 3.73 3.73 ----- ----- ----- 4.78 7.47
3/4" 20 26.7 ----- ----- ----- 2.87 2.87 ----- 3.91 3.91 ----- ----- ----- 5.56 7.82
1" 25 33.4 ----- ----- ----- 3.38 3.38 ----- 4.55 4.55 ----- ----- ----- 6.35 9.09
1 1/4" 32 42.2 ----- ----- ----- 3.56 3.56 ----- 4.85 4.85 ----- ----- ----- 6.35 9.7
1 1/2" 40 48.3 ----- ----- ----- 3.68 3.68 ----- 5.08 5.08 ----- ----- ----- 7.14 10.15
2" 50 60.3 ----- ----- ----- 3.91 3.91 ----- 5.54 5.54 ----- ----- ----- 8.74 11.07
2 1/2" 65 73.0 ----- ----- ----- 5.16 5.16 ----- 7.01 7.01 ----- ----- ----- 9.53 14.02
3" 80 88.9 ----- ----- ----- 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49
3 1/2" 90 101.6 ----- ----- ----- 5.74 5.74 ----- 8.08 8.08 ----- ----- ----- ----- -----
4" 100 114.3 ----- ----- ----- 6.02 6.02 ----- 8.56 8.56 ----- 11.13 ----- 13.49 17.12
5" 125 141.3 ----- ----- ----- 6.55 6.55 ----- 9.53 9.53 ----- 12.7 ----- 15.88 19.05
6" 150 168.3 ----- ----- ----- 7.11 7.11 ----- 10.97 10.97 ----- 14.27 ----- 18.26 21.95
8" 200 219.1 ----- 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23
10" 250 273 ----- 6.35 7.8 9.27 9.27 12.70 12.70 15.09 18.26 21.44 25.40 28.58 25.40
12" 300 323.9 ----- 6.35 8.38 9.53 10.31 14.27 12.70 17.48 21.44 25.4 28.58 33.32 25.4
14" 350 355.6 6.35 7.92 9.53 9.53 11.13 15.09 12.70 19.05 23.83 27.79 31.75 35.71 -----
16" 400 406.4 6.35 7.92 9.53 9.53 12.7 16.66 12.70 21.44 26.19 30.96 36.53 40.49 -----
18" 450 457.2 6.35 7.92 11.13 9.53 14.27 19.05 12.70 23.83 29.36 34.93 39.67 45.24 -----
20" 500 508 6.35 9.53 12.7 9.53 15.09 20.62 12.70 26.19 32.54 38.1 44.45 50.01 -----
22" 550 558.8 6.35 9.53 12.7 9.53 ----- 22.23 12.70 28.58 34.93 41.28 47.63 57.98 -----
24" 600 609.6 6.35 9.53 14.27 9.53 17.45 24.61 12.70 30.96 38.89 46.02 52.37 59.54 -----
* The above standard pipe sizes only should be used in pressure parts & piping drawings
DESIGN DIRECTIVE Rev: No.: Nil
Approved By:
Prepared By: S.Shanmugam Reviewed By: S.David Date: 27-03-06
T.MANIKANDAN

You might also like