Scribd
Upload
513 views1 page

Hanbell Lubricant Spec Sheet HBR-B05

HBR-B05 is a synthetic refrigeration compressor oil designed for use in Hanbell screw compressors. It has a viscosity of 66.3 cSt at 40°C and 8.9 cSt at 100°C, a viscosity index of 108, a flash point of 505°F, and a pour point of -45°F. HBR-B05 is recommended for retrofitting applications using Hanbell rotary screw compressors in air conditioning and industrial refrigeration equipment operating with refrigerants such as R134A, R404A, R407C, and R507.

Uploaded by

Dũng Lê
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
513 views1 page

Hanbell Lubricant Spec Sheet HBR-B05

HBR-B05 is a synthetic refrigeration compressor oil designed for use in Hanbell screw compressors. It has a viscosity of 66.3 cSt at 40°C and 8.9 cSt at 100°C, a viscosity index of 108, a flash point of 505°F, and a pour point of -45°F. HBR-B05 is recommended for retrofitting applications using Hanbell rotary screw compressors in air conditioning and industrial refrigeration equipment operating with refrigerants such as R134A, R404A, R407C, and R507.

Uploaded by

Dũng Lê
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RC-HBR-B05

Refrigeration Compressor Oil

Properties* ASTM# Typical Characteris cs

Kinema c Viscosity
D‐445 cSt @ 40°C 66.3
cSt @ 100°C 8.9
Saybolt Viscosity
D‐2161 SUS @ 100°F 345.0
SUS @ 210°F 52.2
D‐2270 Viscosity Index 108
Density, lb/gal, 60°F (15.5°C) 7.96
D‐4052
(Gardner Method) Specific Gravity, g/cc @ 60°F (15.5°C) .957
Packaging Flash Point, C.O.C., °F (°C) 505 (263)
D‐92
1 Gallon Pail 5 Gallon Pail Fire Point, C.O.C., °F (°C) 560 (296)
D‐97 Pour Point °F (°C) ‐45 (‐43)
D‐877 Dielectric Strength, (kV) 44.0

HBR‐B05 is a synthe c lubricant designed for Hanbell Screw Compressors installed in air condi oning and industrial
refrigera on equipment. This Polyolester based lubricant is recommended for OEM retrofi ng applica ons in
equipment using Hanbell Rotary Screw Compressors per factory standards matched to the condi ons and refrigerant
specified.

Benefits Applications
 Non hazardous (under 29 Ideal for use in any system where a premium synthetic lubricant is beneficial to
CFR1910.1200) ensure proper lubrication of the compressor and other components found in a
 High chemical stability resists properly designed refrigeration system.
reaction with all components in a This lubricant is suitable for use in most systems utilizing a number of refrigerants
properly designed refrigeration including: R134A, R404A, R407C and R507. Please note that each application
system is different and an oil cooler may be required. See your MCS representative for
 Low moisture content application.
 High dielectric strength allows
this refrigeration lubricant to be
an excellent insulator between
the motor windings and
compressor body.
 Low wax content reduces
separation potential *These values are not intended for use in preparing specifica ons.

Revised 2015-04-10

You might also like