SANTAK PRODUCTS

DATASHEET
ALL-ROUND POWER PROTECTION
Power Management Expert
Santak Electronic (Shenzhen) Co. Ltd. is an international manufacturer specialized in uninterrupted
power supply (UPS) development, production and operation. Established for more than 35 years,
Santak has been unanimously acknowledged by users in varous industries with the strong technology
research and development strength, reliable product quality, as well as complete, quick and efficient
after-sales service system. Santak products have been widely applied to the government, finance,
telecommunications, power, transporation, scientific research institutions, manufacturing, amy
and other industries, and tens of millions of users are relying on the safe and reliable power supply
environment provided by Santak UPS for their equipment.

SANTAK
WITH CONSISTENT AND RELENTLESS PURSUIT IN ITS SERVICE FOR UPS INDUSTRY.

Santak established two R & D Great power guarantees fruitful DSP uses the industry’s most
bases at both Shanghai and results. Santak is and will be at advanced wireless parallel
Shenzhen working on UPS the forefront of the industry in technology, through efficient
products and perspective core technology preservation computing, we enhanced its ability
technology. Our research bases and new product development to handle all kinds of emergencies,
acquired 400 high caliber research capabilities. On the patent side, so that UPS’s reliability, stability
personnel of only PHD and Santak is the owner of many and input/output characteristics
graduate student, backed by rich important technologies. We own can be greatly improved. Wireless
funding, advanced technology the technologies such as wireless parallel technology reduces the
equipment and IPD process parallel, AC-output parallel power probability of a single point failure,
management protection. We systems and their current-sharing its reliability design is close to
can assert our leading position control methods, uninterruptable perfect. DSP works properly even
in core technology control and power supply module and system, when the parallel communication
new product development in in addition to its by-pass cut line malfunctions.
the industry, thus ensuring methods.
our products’ advancement,
innovation, high reliability and
high applicability.

2 | SANTAK
 SANTAK Milestone
Santak’s main factory is located at
Baoan, Shenzhen with a registered
capital of 141.1 million yuan and
about 43,000 square meters in
size. The factory has 7 SMT lines, 2019
7 PCB assembly lines, and 30 OHSAS18001 certification

assembly lines in total. The factory

2018
produces products ranging from Qualified as“High-Tech Enterprises”; ISO14001-2015 certification
offline 500VA to online 800KVA
high-power parallel series, with 2017
Qualified as“Famous Trademark of Guangdong Province” ; ISO 9001-2015
an annual output of more than certification
700,000 units. The company
introduced and implemented a 2011
series of advanced management Qualified as“Famous Trademark of Guangdong Province’
concepts and tools, including IPD
2008
R&D process, CMMI process, SAP Acquired by Eaton
system, and CRM system, which
enabled the company to operate 2007
in a disciplined manner, enhance Qualified as“Chinese Famous Brand in Guangdong Province”

organizational functions, and 2005

expand output efficiency. ISO14001-2004 system certification

2002
IS09001:2000 international quality system certification

1996
Established 7 branches in Bejjing, Shanghai, Guangzhou, etc.

1994
Santak factory established

1992
Santak Electronic (Shenzhen) Co., Ltd Founded

1984
Santak Corp Founded

SANTAK | 3
SANTAK Market Share

Continue To Lead The Single Phase UPS Market

NO.1 In China.

More than 35 years’ experience in UPS.

IT Government Financials Manufacturing Retail

* Data sources are from ICT Annual Report.

SANTAK Factory
• Over 700,000 pieces UPS
made per year
• Cover full power range from
500VA to 800KVA
• 18 State- of the- Art automatic
PCBA Production Lines
• Various PCBA manufacturing
capability

ISO Certificated Factory

4 | SANTAK
First Class Lab - Lab Qualification
Our laboratory is accredited by the industry authority.

• TUV: IEC/EN62040-1
IEC/EN60950-1
IEC/EN 62477-1 62368-1
• CNAS: IEC/EN 62040-1/2/3
• UL CTDP: UL 1778
• UL WTDP: UL 1778
• UL/IEC witness test

First Class Lab - Lab Capability

• Lab area: >1800m
• Lab capabilities. > 300 engineers
• MDC testing Capability
• Lithium testing capability
• ATE & PCBA Platform
• EMC Testing
• Drop and Vibration Testing
• Burn in Room
• Constant humidity and
temperature chamber

Excellent service

• China Training Center provide

training & certification for all
series of SANTAK products
• Eaton University Global
Online Learning, Training and
Assessment System
• Establish authorized service
outlets in a wider area to provide
first-line services
• Expert technical team always
online to ensure strong support

SANTAK | 5
 SANTAK Product
Family
‫ ظ‬Off-Line UPS
‫ ظ‬Line-interactive UPS
‫ ظ‬Online UPS
‫ ظ‬Module UPS
‫ ظ‬Battery
‫ ظ‬Connectivity & Software

Off-Line UPS

TG500/1000
KEY FEATURE
• High frequency PWM technology
• Wider input voltage & frequency
• Full protection of overload, deep discharge and overcharge
• Cold-start without utility
• Space-minimized, light and silent design
• Tower / flat installation

SPECIFICATION

Input Output
Trans- Dimension Weight
Capacity Back-up Operating
Model fer WxDxH (kg)
(VA/W) Voltage Voltage Frequency Outlet Time* Environment
Time (mm)
(Vac) (Vac) (Hz)

TG500 500VA/300W 80 x 232 x 177 2.6

220x(1±10%) 50 ± 1 ≥6mins 0-40 ℃
Typical
165 - 265 Battery Battery (half 20%-90% relative
10ms
Mode Mode load) humidity
TG1000 1000VA/600W 91 x 283 x 240 5.1

* All internal batteries are default as STK brand, any other battery brand might be applied without prior notice.
* Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
* In the interests of continuous product improvement, all specifications are subject to change without notice.

6 | SANTAK
Line- interactive UPS

Robust 650-1200VA
KEY FEATURE
• Built-in AVR transformer to stabilize output voltage
• Two step boost and one step buck design
• Wide acceptable input range from 140~300V
• Auto charging when UPS in OFF mode
• Auto restart while utility recovery
• Cold-start without utility
• Full protection of overload, deep discharge and overcharge

SPECIFICATION

MODEL R650 R1200

POWER RATING VA/W 650VA/360W 1200VA/600W

PRODUCT TOPOLOGY PRODUCT TOPOLOGY Line Interactive

Voltage 230VAC

INPUT Voltage Range 140-300VAC

Frequency >40Hz (comply with generator)

Voltage 230VAC

Voltage Regulation
+/-10%
(Batt. Mode)

Frequency 50Hz

OUTPUT Waveform AC mode:pure sine wave; battery mode:simulated sine wave

Frequency Regulation
+/-1 Hz
(Batt. Mode)

Transfer time Typical 4-8ms

Receptacles Universal x 2 Universal x 4

Type VRLA

BATTERY Configuration 12V/7Ah*1 24V/7Ah*2

Recharge time 2-4hours to 90% capacity

BACKUP TIME* 1PC load 15 minutes 30 minutes

PROTECTION Full protection Over discharge,Overcharge, Overload, Short circuit

Dimension, WxDxH 100 x 278 x 143 mm 139 x 365 x 195 mm

PHYSICAL
Net Weight 4.4kg 9.2kg

Temperature: 0-40°C
Operating Environment
Relative Humidity: 0-90% (non-condensing)
ENVIRONMENT
Noise Level Less than 40dB

SANTAK | 7
Line-interactive UPS

Blazer Pro 600-2000VA

KEY FEATURE
• Built-in boost and buck AVR to stabilize output voltage
• Fast charger shorten the charging time to 2-4 hours
• Wide input voltage & frequency range (comply with generator)
• Cold start without utility
• Auto restart while utility recovery
• RJ11/RJ45 port TVSS protection
• USB HID Smart Battery interface, built-in power management
• CE compliance

SPECIFICATION
Nominal Voltage 220VAC, 50/60Hz
INPUT
Voltage Range 162 - 268 VAC

Connection IEC320-10A inlet

Voltage Regulation 220VAC +/-10% (Battery mode)

Frequency Regulation 50Hz or 60Hz +/-1Hz (Battery mode)

OUTPUT
Waveform AC mode:pure sine wave; battery mode:simulated sine wave

Receptacles IEC320-10A outlet

Transfer time Typical 4-8ms

Type VRLA
BATTERY
Recharge time 2-4hours to 90% capacity

PRODUCT TOPOLOGY Line Interactive

RJ11(600/800VA)
DATA LINE SURGE PROTECTION
RJ45(1000/1500/2000VA)

COMMUNICATIONS USB port, HID power device

Temperature: 0-40ºC
OPERATING ENVIRONMENT
Relative Humidity: 0-90% (non-condensing)

SAFETY CE

Battery configu- Net Weight Output Dimensions

Model Power Rating Back-up Time*
ration (kg) Receptacles (W x D x H) mm

Blazer 600 Pro 600VA/360W 18 min（1PC load） 12V/7Ah*1 4.5

4 100 x 279 x 143
Blazer 800 Pro 800VA/480W 22 min（1PC load） 12V/9Ah*1 5.0

Blazer 1000 Pro 1000VA/600W 18 min（2PCs load） 24V/7Ah*2 8.8

Blazer 1500 Pro 1500VA/900W 25 min（2PCs load） 24V/9Ah*2 10.3 6 139 x 365 x 195

Blazer 2000 Pro 2000VA/1200W 25 min（2PCs load） 24V/9Ah*2 10.3

8 | SANTAK
Line-interactive UPS

K series 500-1000VA
KEY FEATURE
• Fashion ID
• Built-in boost and buck AVR to stabilize output voltage
• Equipped with surge protection for both UPS and equipment
• Wide acceptable range of input voltage & frequency (comply
with generator)
• Auto restart while utility recovery
• Cold-start without utility
• Full protection of overload, deep discharge and overcharge
• CE compliance

SPECIFICATION

Input Input Back- Dimension

Capacity Input Surge Operating Noise Weight
Model AVR Voltage Current Outlet up WxHxD
(VA/W) Protection Temperature Level (kg)
Range protection Time* (mm)

K500 500VA/300W 6.3A IEC or 18min 98x105x280 4.4

162V - SCHUKO or
YES YES(190J) 0-40℃ <40dB
268V UNIVER-
K1000 1000VA/600W 8A SAL 45min 133x190x320 9.0

Online UPS - single phase

Castle 1-10KVA
KEY FEATURE
• Double conversion with Oms transfer time
• Green power design, input PF up to 0.99 and output PF up to 0.9
• Over Voltage Cut-off Device function to provide best input protection
• ECO mode available, efficiency up to 97%
• Parallel function for N+X redundancy for 6K~10KVA
• LCD display
• RS232 or USB standard offer, SNMP/Dry contact/Modbus
communication slot card optional
• Standard model (with batteries)/ Long backup model (without battery)
offer
• 6A charger for long backup model to fasten the recharge time
• CE compliance

SANTAK | 9
Castle 1~3kVA UPS Product Specification
Model Castle 1K Castle 1KS Castle 2K Castle 2KS Castle 3K Castle 3KS

Rating VA/W 1000VA/900W 2000VA/1800W 3000VA/2700W

Input Voltage Range 100 ~ 300 VAC

Frequency Range 40 Hz - 70 Hz
Input
Input Wiring Single phase with ground

input power factor 0.99

Output Power Factor 0.9

Nominal Output Voltage 220/230/240VAC

Voltage Regulation 1%

Frequency Range (Battery

50 / 60 ±0.05Hz
Mode)
IEC C13 *3+
IEC model IEC C13 *4 IEC C13 *3 IEC C13 *4 IEC C13 *6 IEC C13*4+C19*1 terminal
blocker
Output Schuko model Schuko*3 NA Schuko*4 NA Schuko*4 NA
Outlet
NEMA model NEMA*4 NA NEMA*4 NA NEMA*4 NA

Universal*2+IEC Universal*2+IEC
Universal model Universal*3 Universal*1 Universal*4 Universal*4
C13*1 C19*1

Current Crest Ratio 3:1

Voltage Distortion (THDv) < 1% @ linear load, < 5%@ non-linear load

Output Waveform Pure sine wave

Inverter Mode >89% >91% >91%

Efficiency
ECO Mode >97%

Battery Type 12V / 9Ah External 12V / 9Ah External 12V / 9Ah External
batteries batteries batteries
Number of Internal Battery 2 required 4 required 6 required

Rated Battery Voltage 24V 48V 72V

Battery
Backup Time (@ FullLoad) > 3.5 mins depends on > 3.5 mins depends on >3.5min depends on
customer con- customer con- customer
Recharge Time (to 90%) 4 hours figuration 4 hours figuration 4 hours configuration

Charging Current 1.5A 6A 1.5A 6A 1.5A 6A

Battery Mode
0ms
<-->InverterMode
Transfer Time
Inverter Mode
4ms (typical)
<-->BypassMode

Display LCD load rating / battery capacity / input / output / operating mode

Dimension WxHxD (mm) 144x228x356 102x228x346 190x327x399 102x327x390 190x327x399 102x327x390

Net Weight 9.2 kg 3.9 kg 17.4 kg 6.4 kg 22.7 kg 6.4 kg

Operating Temperature 0~40℃

Environment
Noise Level  <40dB@1 meter

RS232 IEC model and UNIVERSAL model: RS232; SCHUKO model and NEMA model: USB+EPO, no RS232
Interface
Communication Slot Yes, comply optional cards NMC, CMC, AS400 card

10 | SANTAK
Castle 6~10kVA UPS Product Specification
Model Castle 6K Castle 6KS Castle 10K Castle 10KS

Power rating VA/W 6000VA/5400W 10000VA/9000W

Input voltage range 120~275VAC

Input frequency range 40Hz-70Hz

Input
Input wiring Single phase with ground

Input power factor ≥0.99

Output voltage 220VAC

Output voltage regulation ±1%

Output wiring Single phase with ground

Output frequency range 50/60Hz±0.2Hz (battery mode)

<2% (linear load)

Output Output THDV
<4% (non-linear load)

Output waveform Pure sinewave

1min @ 105%~125% load

Overload capability 30S @ 125%~150% load
0.5S @ >150% load

Line mode Up to 94% Up to 94%

Efficinecy
ECO model Up to 98% Up to 98%

Battery quantity 15PCS (Internal) 16PCS (External) 16PCS (Internal) 16PCS (External)

Battery capacity 12V/7AH depends on customer 12V/9AH depends on customer

Battery and configuration configuration
charger Backup time >4min >4min

Standard model 1.2A; Long backup time model 4A;

Recharge current

Display LCD+LED load rating/battery capacity/input/output/operating mode

Communication port RS232

Communication Extendable
Dry Contact Card，USB card, MODBUS card and NMC card are optional
and monitoring communication card
Software Winpower

Product dimension
Physical param- 248*500*565 212*500*420 248*500*565 212*500*420
(WxDxH) mm
eters
Product weight (Kg) 59 14 62 16

Operating temperature 0-40℃

Environment
Audible noise <50dB @ 1 meters 1

Certifications
IEC61000, IEC62040,CE
and standard

SANTAK | 11
 Castle 10~20KVA 3:1
KEY FEATURE
• Double conversion with 0ms transfer time
• Single phase/ three phase input configurable
• Green power design, output PF up to 0.9
• 192V1 216V/ 240V battery voltage configurable for 15KVA~20KVA
• ECO mode available, efficiency up to 98%
• Parallel function for N+X redundancy (Up to 3UPS)
• LCD display
• RS232 or USB standard offer, SNMP/Dry contact/Modbus
communication slot card optional
• Internal maintain bypass switch optional
• Low noise design, <50dB @30°C full load
• CE compliance

3C10~20KS Product Specification

Model 3C 10KS 3C 15KS 3C 20KS

Power rating VA/W 10KVA/9KW 15KVA/13.5KW 20KVA/18KW

Input wiring Three phase or Single phase with ground (3:1 or 1:1)

Input voltage range 208VAC-476VAC (three phase) /120VAC-275VAC (signal phase)

Input
Input frequency range 40-70Hz

Input power factor ≥0.99

Output voltage 220/230/240VAC

Output voltage regulation ±1%

Output wiring Single phase with ground

Output frequency range 50/60Hz+/-0.2Hz(battery mode)

Output <2%(linear load)

Output THDV
<4%(non-linear load)

Output waveform Pure sinewave

Crest factor 3:1

Overload capability 10min@105%~125% load;30s@125%~150% load;500ms@>150% load

Line mode >93.5%

Efficiency
ECO mode >98%

Battery voltage 192VDC 192VDC/216VDC/240VDC optional

Battery quantity 16PCS(External) default 16PCS(External),16/18/20PCS adjustment

Battery and
charger Battery capacity and
Depends on customer configuration
Backup time
Recharge current 4A

Parallel Parallel function Up to 3

Display LCD+LED load rating/battery capacity/input/output/operating mode/Fault code

Communication port RS232

Communication Extendable
Dry contact card, USB card, MODBUS card, NMC card are optional
and monitoring communication card
Software Winpower
Product
Physical 212*500*420 248*500*565
dimension (W*H*D) mm
parameters
Product weight (Kg) 16.9 31

Operation temperature 0~40°C

Environment Humidity 0~95%(non-condensing)

Audible noise <50dB@1 meter1

Certification and
IEC61000,IEC62040,CE
Standard

12 | SANTAK
 Castle Rack 1 ~3KVA
KEY FEATURE
• Double conversion with 0ms transfer time
• Input PF up to 0.98 and output PF up to 0.9
• ECO mode available, efficiency up to 98%
• USB standard offer, SNMP/Dry contact/Modbus slot card optional
• Plug-and-Play extend battery module (EBM) to extend backup time
• 19inch standard cabinet compliant, 2U height
• Standard model (with batteries)/ Long backup model (without battery)
offer
• 6A fast charger for long backup model
• CE compliance

RACK 1-3kVA UPS Product Specification

Model Rack 1K Rack 1KS Rack 2K Rack 2KS Rack 3K Rack 3KS

Power rating 1kVA 2kVA 3kVA

Input Voltage Range (110-300)VAC
Input Frequency Range 40-70Hz
Input Power Factor ≥0.98
Rated Battery Voltage 24V 36V 48V 72V 72V 96V

Battery and Type Maintenance-free Sealed Lead-acid UPS Batteries

charger Number of Internal Battery 2PCS - 4PCS - 6PCS -
Recharge Current 1A 6A 1A 6A 1A 6A
Nominal Output Voltage 220*(1±2%)VAC
sync with line of +/-4Hz(Line mode)
Frequency Range
50±0.05Hz (Battery mode)
Output
Output Power Factor 0.9@30°C and 0.8@40°C;
Overload capacity 105%-150%Ὃ47s-25s὚150%-200%Ὃ25s-300ms὚>200%Ὃ200ms (0.8PF)
Outlet IEC C13*6 pcs IEC C13*3 pcs + C19*1 pc
Battery Mode<-->InverterMode 0ms
Transfer Time
Inverter Mode<-->BypassMode 4ms (typical)
depends on depends on depends on
customer customer customer
Backup time (80% load, 0.8PF) >4.5 min >4.5 min >4.5 min
configura- configura- configura-
tion tion tion
Indicator LED Load, battery capacity, UPS working mode
Battery Discharge Battery full: 1buzzing/4s; Battery empty: 1buzzing/1s
Alarm
UPS Alarm Buzzing continue
Auto restart Auto restart while mains recover
USB Monitoring
Interface
Optional Parts NMC Card, Modbus Card, Relay Card
Temperature 0°C-40°C
Environment
Humidity 0-95%, non-condensing
UPS 11 7.2 17.5 8.9 21.6 9.0
Net Weight
EBM - 20.0 - 20.0 - 24.8
UPS 438*420*87 438*420*87 438*570*87 438*420*87 438*570*87 438*420*87
Dimension (W*D*H)
EBM - 438*420*87 - 438*420*87 - 438*420*87
Note:
* All internal batteries are default as STK brand, any other battery brand might be applied without prior notice;

SANTAK | 13
 Castle Rack 6~10KVA
KEY FEATURE
• Double conversion with 0ms transfer time
• Input PF up to 0.99 and output PF up to 1
• High efficiency, up to 95% for online mode, 98% for ECO mode
• LCD with full information and easy configuration
• Flexible battery configuration, 16/17/18/19/20 pcs configurable
• Parallel function for N+X redundancy ( Up to 3 UPS)
• USB/RS232/EPO standard offer, SNMP/Dry contact/Modbus slot card optional
• 19inch standard cabinet compliant, 2U height .
• Plug-and-Play extend battery module (EBM) to extend backup time, 3U height
• 0~12A fast charger adjustable for long backup model
• CE compliance

Rack 6-10kVA UPS Product Specification

Model Rack 6K Rack 6KS Rack 10K Rack 10KS

Power rating VA/W 6000VA/6000W 10000VA/10000W

Input voltage range 110~275VAC

Input frequency range 40Hz-70Hz

Input
Input wiring Single phase with ground

Input power factor ≥0.995

Output voltage 208/220/230/240 VAC

Output voltage
±1%
tolerance
Output wiring Single phase with ground

Output connection 2*IEC, 1*Terminal Block

Output Output frequency
50/60Hz±0.1Hz (battery mode)
range
<1% (linear load)
Output THDV
<5% (non-linear load)
Output waveform Pure sinewave

Overload capability 10min @ 105~125% load; 30S @ 125~150% load; 0.5S @ >150% load

Line mode Up to 95% Up to 95%

Efficinecy
ECO mode Up to 98% Up to 98%

Battery quantity 16PCS default, 16/17/18/19/20 adjustable

Recharge time to 90%

3 hours 3 hours
battery capacity
depends on customer depends on customer
Battery and configuration configuration
charger >4min @ 100% load >2.1min @ 100% load
Backup time
>11min @ 50% load >8min @ 50% load

1.4A default, 0-4A 4A default, 0-12A 2A default, 0-4A 4A default, 0-12A

Recharge current
adjustable adjustable adjustable adjustable

Display LCD+LED load rating/battery capacity/input/output/operating mode

Communication port RS232, USB+EPO, Dry in/Dry out configurable.

Communication Extendable
Dry Contact Card, MODBUS Card, NMC Card are optional
and monitoring communication card
Software Winpower

Product dimension 438* 86.3* 573mm (UPS) 438* 86.3* 573mm (UPS)
Physical 438* 86.3* 573mm 438* 86.3* 573mm
(W*H*D) mm 438*129* 593mm (EBM) 438*129* 593mm (EBM)
parameters
Product weight (Kg) 14 (UPS) 46 (EBM) 14 16 (UPS) 52 (EBM) 16
Operating
0-40ą
Environment temperature
Operating humidity 0-95% (non-condensing)

Standard IEC62040, IEC60950

14 | SANTAK
Online UPS - three phase

3C3-PRO 20K-200KVA
KEY FEATURE
• Input PF up to 0.99 and outputPF up to 0.9
• High efficiency, up to 94% for online mode, 98% for ECO mode
• Flexible battery configuration, 28~36 pcs configurable for 20K ~80KVA
model, 36~40 pcs configurable for 100K ~200KVA model
• Functional modular design for easy maintain.
• Parallel function for N+X redundancy (Up to 4 UPS)
• Wireless parallel technology to increase the reliability
• PCBA coating for dusty and salty application
• Dual input redundancy design
• CE compliance

3C3 PRO 20-200kVA Product Specification

3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro- 3C3 Pro-
Model
20KS 30KS 40KS 60KS 80KS 100KS 120KS 160KS 200KS
Power kVA 20 30 40 60 80 100 120 160 200
rating kW 18 27 36 54 72 90 108 144 180
Topology Double conversion, IGBT based
UPS rectifier/input
Topology PWM, IGBT based
Rated voltage 380Vac/220Vac
Voltage range -50%-20%, depends on load percentage
Input power factor 0.99
THD (i) <5%
Rated frequency 50/60Hz auto sensing
Frequency range 42-72 Hz
UPS Output
Power factor 0.9
Efficiency Up to 94% in online mode; >98% in ECO mode
Output voltage 380Vac/220Vac +/-1%
Overload capacity <105% continuous run; 105%-125% 10min
THDV <2% for Linear load
Output frequency 50/60Hz
Unbalanced load 1
Crest factor 3:1
Bypass
Internal static switch Standard Optional NA
Bypass voltage 380Vac (+/-15%)
Maintainence bypass Standard
Battery
Battery type VRLA
Backup time Varies from battery capacity and load situation
Battery PCS 28-36 PCS adjustable, 32PCS default 36-40 PCS adjustable, 40PCS default
Recharge time 8 hour to 90%
Communication
Interface RS232, Mini slot
Accessories (optional) SNMP/WEB, Modbus/Ethernet, AS400, NMC
Opertion environment
Running temperature 0~40ºC
Storage -25~55ºC
Humidity 5%~95%
Elevation No derating < 1000m
Certifications
EMC IEC61000-4
EMI EN5550022/EN55024
Quality ISO90001 : 2000, ISO14001 : 1996
Certi+A2:A43fication CE

SANTAK | 15
Online UPS - three phase - modular

3A3 PT 25K-200KVA
KEY FEATURE
• Hot swappable power modular design (25KVA each module)
• Advanced three step control technology. efficiency up to 96% for online
mode, 99% for ECO mode
• Flexible battery configuration, 36-42 pcs configurable
• Battery voltage configurable from 432V~504V by 2V step.
• Parallel function for N+X redundancy ( Up to 4 UPS) with Wireless
parallel technology
• Adjustable charger current, 25A max for each module
• Dual input redundancy design
• 7 inches touch screen, easy to operate
• PCBA coating for dusty and salty application
• Internal Maintenance Bypass Switch standard offer
• CE compliance

ARRAY 3A3 PT UPS Technical Specifications

Gerneral Output
UPS output power Output wiring 3ph + N + PE
25-200kVA, 0.9pf
rating
Rated output voltage
220/380, 230/400, 240/415 50/60 Hz
Efficiency in double rating
>96%
conversion mode
<1.5% (100% linear load);
Output THD
Efficiency in Energy <3% (100% non-linear load)
>99%
Saver System
Permitted load power
0.8 lagging to 0.8 leading
Double conversion on-line technology, factor
Topology
three-level bridge IGBT PWM control
10 min 125%
up to 4 units with Hot paralleling Overload on inverter 60 sec 150%
External paralleling
technology 300 ms > 150%
Noise @1m, 25ºC < 65 dBA in double conversion 10 min 125%
Overload on battery 60 sec 150%
UPS topology Double conversion
300 ms > 150%
600mm x 1100mm x 2020mm (75kVA
Overload on bypass Continuous < 115%, 10 ms 1000%
Dimensions Frame喌
(WxDxH) mm 608mm x 1010mm x 2050mm (200kVA Communications
Frame)
Minislot 3 communication bays
Degree of protection IP20
Serial ports Built-in host and device USB
Altitude (max) 1000m above sea level at 40ºC
Standard connectivity 5 building alarm inputs and a dedicated
Input ports EPO
Input wiring 3ph + N + PE Software Santak WinPower
Rated input voltage 220/380, 230/400, 240/415 V Compliance with standards
Rated input frequency 50 or 60 Hz, user configurable Safety IEC 62040-1
Frequency tolerance 40 to 72 Hz EMC IEC 62040-2
Input power factor at Performance IEC 62040-3
0.99
100% load
RoHS EU directive 2011/65/EU
Input THD <3%
* Due to continuous product improvement programs, specifications
Soft start capability Yes are subject to change without notice.
Battery
Battery type VRLAȟAGMȟGEL
Intelligent Battery Management or
Charging method
Continuous Float
Temperature
Optional
compensation
Battery quantity 36 to 42 blocks. Default is 40 blocks
Battery start capability Yes
* Display panel supports English, French, Portuguese, Spanish and
Russian

16 | SANTAK
VRLA Battery

Castle Battery C12v Series

KEY FEATURE
• 10 years life design at floating charging condition
• Excellent high rate discharge performance for UPS application
• Low self discharge rate, less than 2% at 20°C after 28 days
• Embedded terminal design makes the installation and maintenance
work easy and convenient
• UL 94-V0 frame retardant level

Specifications
Voltage Capacity /Ah W/cell Internal Dimensions (mm) Weight
Item No. Terminal
(V) (C20@25℃ ) 1.67V@15min Resistance (m Ω) L W H TH (Kg)

C12-18 12 18 61.7 16.2 181.5 77 167.5 167.5 5.4 M5

C12-26 12 26 89.1 14 166 175 133 133 7.8 M5

C12-38 12 38 123 9.0 197 165 170 170 11.4 M6

C12-65 12 65 210 6.5 325 167 174 174 19.2 M6

C12-100 12 100 324 4.0 330 173 213 219 28 M8

C12-120 12 120 336 4.0 408 177 225 225 32.3 M8

C12-150 12 150 420 3.5 483 170 238.5 238.5 41.5 M8

C12-200 12 200 647 2.7 522 240 218 224 57.1 M8

C12-225 12 246 700.4 2.5 522 240 218 224 63.5 M8

Battery Characteristics
Design life 10 years

Charge: 0℃ ~40℃
Operating Temperature Range Discharging: -20℃ ~55℃
Storage: -15℃ ~50℃

103%C20 @40℃

Capacity Affected by Temperature 100% C20@25℃

86% C20@0 ℃

Float Charging Voltage 13.5V - 13.8V; Recom. 13.65V

Equalizing Charging Voltage 14.1V-14.4V; Recom. 14.1V

Float Charging Temp. Coefficient -18mV/ ℃

Recycling Usage Temp. Coefficient -30mV/ ℃

Max. Charging Current 0.3CA

Max AC ripple (charger) Less than 2%

Monthly Self Discharge Rate less than 3% per month (25℃ )

SANTAK | 17
 Customer Information
Name :
Contac t Details:

Attach You r Nam e Card

18 | SANTAK
Customer Information
Name :
Contac t Details:

Attach You r Nam e Card

SANTAK | 19
SANTAK ELECTRONIC (SHENZHEN) CO., LTD.
Shenzhen, P.R. China Tel: 0086 755 27572666 Website: www.santak.com
Address: No. 8 Baoshi Road, Baoan Fax: 0086 755 27572730 (27572480)
20 | SANTAK
District, Shenzhen, 518101 Email: [email protected] June. 2022 EN-00004-02