Scribd
Upload
24 views1 page

List of Steel To Be Used

The document lists the steel required to make molds for four different parts of a Snap Power product. It specifies the name, size, material, quantity, and cut size needed for each mold component, including core and cavity plates, clamping plates, parallel plates, ejector plates, and inserts. The molds are for the front cover, back cover, toggle switch cover, and LED cover parts and require various grades of steel like P20, mild steel, and 4140.

Uploaded by

Raymond Ogi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
24 views1 page

List of Steel To Be Used

The document lists the steel required to make molds for four different parts of a Snap Power product. It specifies the name, size, material, quantity, and cut size needed for each mold component, including core and cavity plates, clamping plates, parallel plates, ejector plates, and inserts. The molds are for the front cover, back cover, toggle switch cover, and LED cover parts and require various grades of steel like P20, mild steel, and 4140.

Uploaded by

Raymond Ogi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

List of steel to be used: Snap Power

Mould Name: Part Name Part Size (T-L-W) Material Qty. Order Material (Cut Size) = T-L-W
Core & Cavity Plate
70mm*350mm*280mm P20 Steel 2PCS 3" X 14½" X 11½"
Clamping Plate
35mm*350mm*340mm Mild Steel (MS) 2PCS 1¾" X 14½" X 14"
Sprue Ejector Plate
30mm*350mm*280mm Mild Steel (MS) 1PC 1¾" X 14½" X 11½"
SPOG-200-FPPX (FRONT COVER)
Back Plate
35mm*350mm*280mm Mild Steel (MS) 1PC 1¾" X 14½" X 11½"
Parallel Plate
50mm*350mm*100mm Mild Steel (MS) 2PCS 2¼" X 14½" X 4½"
Ejector Plate
24mm*350mm*174mm Mild Steel (MS) 2PCS 1¼" X 14½" X 7¼"
Core & Cavity Plate
70mm*280mm*230mm P20 Steel 2PCS 3" X 11½" X 9½"
Clamping Plate
35mm*280mm*290mm Mild Steel (MS) 2PCS 1¾" X 11½" X 12"
SPOG-200-BP (BACK COVER)
Parallel Plate
50mm*280mm*100mm Mild Steel (MS) 2PCS 2¼" X 11½" X 4½"
Ejector Plate
24mm*280mm*124mm Mild Steel (MS) 2PCS 1¼" X 11½" X 5½"
Core & Cavity Insert Plate
30mm*130mm*125mm P20 Steel 2PCS 1½" X 5½" X 5½"
Core & Cavity Base Plate
60mm*250mm*230 4140 Steel 2PCS 3" X 10½" X 9¾"
Clamping Plate
SPOG-200-LN (TOGGLE SWITCH) 35mm*250mm*290mm Mild Steel (MS) 2PCS 1¾" X 10½" X 12"
Parallel Plate
50mm*250mm*100mm Mild Steel (MS) 2PCS 2¼" X 10½" X 4½"
Ejector Plate
24mm*250mm*124mm Mild Steel (MS) 2PCS 1¼" X 10½" X 5½"
Core & Cavity Insert Plate
30mm*200mm*170mm P20 Steel 2PCS 3" X 8½" X 7¼"
Core & Cavity Base Plate
60mm*300*250mm 4140 Steel 2PCS 3" X 12½" X10½"
Clamping Plate
SPOG-200-LP (LED COVER) 35mm*300mm*310mm Mild Steel (MS) 2PCS 1¾" X 12½" X 12¾"
Parallel Plate
50mm*300mm*100mm Mild Steel (MS) 2PCS 2¼" X 12½" X 4½"
Ejector Plate
24mm*300mm*146mm Mild Steel (MS) 2PCS 1¼" X 12½" X 6¼"

You might also like