Scribd
Upload
28 views1 page

Carbon Dioxide FIRE EXTINGUISHERS

This document provides information on Sentry Carbon Dioxide Wheeled Fire Extinguishers. It describes the features of the extinguishers including their simple operation and maintenance, portable and compact design, and use of a non-corrosive suppressing agent. The extinguishers are available in 50 lb and 100 lb models and are suitable for protecting areas at risk of Class B or C fires. Typical applications include aviation hangers, paint spray booths, and metal tube manufacturing facilities.

Uploaded by

JEAN FELLIPE BARROS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

Carbon Dioxide FIRE EXTINGUISHERS

This document provides information on Sentry Carbon Dioxide Wheeled Fire Extinguishers. It describes the features of the extinguishers including their simple operation and maintenance, portable and compact design, and use of a non-corrosive suppressing agent. The extinguishers are available in 50 lb and 100 lb models and are suitable for protecting areas at risk of Class B or C fires. Typical applications include aviation hangers, paint spray booths, and metal tube manufacturing facilities.

Uploaded by

JEAN FELLIPE BARROS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATA SHEET

Carbon Dioxide
Wheeled
Fire Extinguishers

Features
n Simple operation and maintenance

n Portable, compact design

n Non-corrosive, non-conductive, clean suppressing agent

n Available in 50 lb (23 kg) and 100 lb (45 kg) models

n UL/ULC listed

n Trilingual glare-resistant, one-piece mylar nameplates


(English, French, Spanish)
n One person operation

n Large 16 in. (406 mm) semi-pneumatic rubber wheels

Application 006798

SENTRY Carbon Dioxide Wheeled Fire Extinguishers are


designed to protect areas where Class B (flammable liquids
Model No. CD-50-D-1 CD-100-D-1
and gases) or Class C (energized electrical equipment) fires
could occur. They may be used indoors where winds and drafts Part No. 433537 (UL/ULC) 433538 (UL/ULC)
do not affect discharge or where a clean suppressing agent is
required. Capacity 50 lb (22.7 kg) 100 lb (45.4 kg)

Typical applications include: UL/ULC Rating 20-B:C 20-B:C


n Aviation hangers Fire Suppression Capacity
n Paint spray booths Novice 20 ft2 20 ft2
Operator (1.9 m2) (1.9 m2)
n Quench tanks
Experienced 50 ft2 50 ft2
n Metal tube manufacturing
Operator (4.7 m2) (4.7 m2)
Description Discharge 15 ft 40 ft
1. Upright positive on-off operation utilizing the squeeze grip Hose Length (4.6 m) (12.2 m)
activation, precision machined, chrome plated, forged valves,
DOT/TC approved steel cylinder mounted to a wheeled Discharge Time 35 seconds 70 seconds
carriage for ease of mobility. Effective Range 10-12 ft (3.1-3.7 m) 10-12 ft (3.1-3.7 m)
2. Nameplate is made of etched aluminum and contains Weight 315 lb (142.9 kg) 495 lb (224.5 kg)
hazard identification as well as operating and maintenance
instructions. Height 58 3/4 in. (1.5 m) 57 in. (1.45 m)

3. CD-50-D-1 unit is equipped with 15 ft (4.6 m) and CD-100-D-1 Width 20 in. (508 mm) 29 in. (737 mm)
unit is equipped with 40 ft (12.2 m) of rubber-jacketed, wire- Depth 28 in. (711 mm) 28 in. (711 mm)
braided, high-pressure discharge hose.
4. Wire braided hose and shock resistant horn keep static
electricity to a minimum. Ordering Information
5. These extinguishers are suitable for use in temperatures For fire protection assistance, see your nearest Authorized
from –22 °F to 120 °F (–30 °C to 49 °C). SENTRY Distributor.

6. Carbon dioxide is a non-corrosive, non-damaging


Note: The converted metric values in this document are provided for
suppressing agent that leaves no residue after a fire. Carbon dimensional reference only and do not reflect an actual measurement.
dioxide provides its own pressure for discharge, and because
SENTRY and the product names listed in this material are marks and/or
it is a gas, it will penetrate and spread to all parts of a hazard. registered marks. Unauthorized use is strictly prohibited.

One Stanton Street | Marinette, WI 54143-2542, USA | +1-715-735-7411 | www.ansul.com


© 2021 Johnson Controls. All rights reserved. All specifications and other information shown were
current as of document revision date and are subject to change without notice. | Form No. F-2003135-06

You might also like