Scribd
Upload
39 views

Excel Backing Compound

Excel Backing Compound is a 100% solids epoxy resin compound formulated for backing wear metal in crushers and grinding mills. It provides improved compressive strength and resistance to degradation compared to traditional zinc pours. The compound is pre-portioned for easy mixing and achieves initial cure within 4-6 hours at 77°F, eliminating costly and dangerous zinc pours while maintaining crushers.

Uploaded by

Salatiel Marques
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Excel Backing Compound

Excel Backing Compound is a 100% solids epoxy resin compound formulated for backing wear metal in crushers and grinding mills. It provides improved compressive strength and resistance to degradation compared to traditional zinc pours. The compound is pre-portioned for easy mixing and achieves initial cure within 4-6 hours at 77°F, eliminating costly and dangerous zinc pours while maintaining crushers.

Uploaded by

Salatiel Marques
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Excel Backing Compound

for Cone & Gyratory Crusher Component Replacement

Excel Backing Compound is a 100% solids epoxy resin Product Description:


compound formulated for backing wear metal in all types Excel Backing Compound is the result of decades of formulation
of crushers, grinding mills and other heavy machinery used refinement and industry experience, satisfying the exacting
in mining and crushed aggregate operations. As the name requirements of crusher and mill manufacturers. Excel Backing
suggests, Excel Backing Compound eliminates costly and Compound material is pre-portioned for effortless mixing and
dangerous molten zinc pours formerly used to maintain fast cure. Long experience has proven that these materials will
crushers and also offers improved compressive strength, as resist degradation due to thermal cycling and aging.
well as improved resistance to oil, water and chemicals that may
be introduced during milling operations. Applications:
• Crusher Wearing Parts

• Extreme Hard Rock Crushing

• Grinding Mills (Trowelable Formula also available)

• Cold Temperature Crusher Pours (not below 50°F)

• Crusher Preparation

Physical/Chemical Characteristics:
Compressive Strength: 16,700 psi
(D-695) Compressive Modulus: 4.3 x 105
Tensile Strength: 5,060 psi
(D-638) Linear Shrinkage: .0005in/in
Heat Distortion Temperature: 150°F
Bond Impact: 55 ft.lb./in.
Pouring Viscosity: 5,500 - 6,500 cps
Pot Life: 20 minutes 77°F
In Service Time: 4-6 Hours 77°F
Flash Point: over 200°F
Usage (Theoretical): 22# Kit = 340 cu. in. volume
55# Kit = 850 cu. in. volume

Technical Information:
Excel offers technical service and support 24 hours a day-7
days a week in order to provide the help you need to keep your
For emergency after-hours support crushers running. Our engineering staff and field service team
call 309.202.8300 to speak to an will travel anywhere in the world for on-site troubleshooting and
Excel Professional anytime. repair support.

+1 309.347.6155 • [email protected]
ExcelFoundry.com

Backing Compound SS.indd 1 3/5/13 9:50 AM

You might also like