Scribd
Upload
61 views1 page

Etabs Wind and Earth Quake Data Sheet

This document provides material properties and load values for structural analysis of a building project. It includes concrete compressive strengths, modulus of elasticity values, moment of inertia values for columns, beams, and slabs. It also includes earthquake design values from ASCE 7-05, wind load values from BNBC code, soil test conditions, and story heights. Load values are provided for dead, live, parapet, roof live, and overhead water tank loads.

Uploaded by

abdullah rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
61 views1 page

Etabs Wind and Earth Quake Data Sheet

This document provides material properties and load values for structural analysis of a building project. It includes concrete compressive strengths, modulus of elasticity values, moment of inertia values for columns, beams, and slabs. It also includes earthquake design values from ASCE 7-05, wind load values from BNBC code, soil test conditions, and story heights. Load values are provided for dead, live, parapet, roof live, and overhead water tank loads.

Uploaded by

abdullah rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Address:

No. of Story:

Material Properties
Column f'c= psi M. of Elasticity, E= I about 2 Axis= 0.70 I about 3 Axis= 0.7
Beam f'c= psi M. of Elasticity, E= Tors. Constant= 0.01 I about 2 Axis= 0.35 I about 3 Axis= 0.35
Slab f'c= psi M. of Elasticity, E= Bending m11= 0.25 Bending m22= 0.25 Bending m12= 0.35
Wall f'c= psi M. of Elasticity, E= Bending m11= 0.25 Bending m22= 0.25 Bending m12= 0.25
MS Rod f'c= psi M. of Elasticity, E=

Earthquake Value Input BNBC Article/Page Windload Value Input BNBC Article Soil Test Condition
Building Length ft Occupancy Category= Pile Dia= in
Building Width ft Exposure Type= Pile Length= ft, from EGL
Height ft Ridge Height, hr= Pile Capacity= Ton
No. of Story Building Width=
Soil Type Building Length= Footing Depth= ft
District Wind Direction= Soil Capacity= ksf
Occupancy Category Enclosure Classification=
Damping Ratio=
Structure Type=
Structure Frame Type=
Topo. Factor , kzt=

ASCE 7-05 Code (Seismic) ASCE 7-05 Code (Wind) Story Height (ft) Grid Line
User Defined T= Wind Co-effic. Cpw= Basement 1 X. Direction Y Direction
Resp. Modi. R= Leeward Co-effic. Cpl= Basement 2
Sys. Ov.Strength, Ω= Wind Direction= Gr. Floor
Deflec. Amplific, Cd= e1 Ratio= 1st Floor
Occupncy Importance, I= e2 Ratio= 2nd Floor
0.2 Sec. Spectral Accl, Ss= Wind Speed (mph)= 3rd Floor
Long-Period Trans. Period, Lt= Exposure Type= 4th Floor
Site Class= Importance Factor, I= 5th Floor
Site Co-efficient, Fa= Topograph. Factor, kzt= 6th Floor
Site Co-efficient, Fv= Gust Factor, G= 7th Floor
m or x (Staadpro)= Directionality Factor, kd= 8th Floor
Building Natural Freq.(Hz)= 9th Floor
LOADING Gcpi= 10th Floor
PW= psf C (if use BNBC Code)= 11th Floor
FF= psf K (if use BNBC Code= 12th Floor
Lime Terr.= psf 13th Floor
Parapet. W= psf 14th Floor
LL= psf 15th Floor
Roof LL (Lr.)= psf Roof
O.H.W.T.= psf Chillakotha
Slab Thick= in O.H.W.T.

You might also like