Scribd
Upload
186 views1 page

Miramer M232 TDS

MIRAMER M232 is a difunctional ether acrylate with a chemical name of triethylene glycol diacrylate (TEGDA). It is a liquid with a maximum color of 100 APHA and maximum moisture and acid value of 0.2. It has a viscosity of 10-20 cps at 25°C and refractive index of 1.462. Major applications include coatings, adhesives, OPV, inks, and electronics. It should be stored in a cool, dry place away from direct sunlight.

Uploaded by

Adesh Gurjar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
186 views1 page

Miramer M232 TDS

MIRAMER M232 is a difunctional ether acrylate with a chemical name of triethylene glycol diacrylate (TEGDA). It is a liquid with a maximum color of 100 APHA and maximum moisture and acid value of 0.2. It has a viscosity of 10-20 cps at 25°C and refractive index of 1.462. Major applications include coatings, adhesives, OPV, inks, and electronics. It should be stored in a cool, dry place away from direct sunlight.

Uploaded by

Adesh Gurjar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

MIRAMER M232
MIRAMER M232 is a difunctional ether acrylate.

Description Product Data

Functionality 2

O O Appearance Liquid

Color (APHA) 100 Max.


O
O O Moisture (%) 0.2 Max.
2
Acid value (mgKOH/g) 0.2 Max.

Viscosity @ 25℃ (cps) 10 – 20


Chemical Name: Triethylene glycol Diacrylate
Inhibitor, MeHQ (ppm) 600
[TEGDA]
Synonyms: Polyethylene glycol diacrylate Refractive index (nD25) 1.462
CAS Number: [1680-21-3] Surface tension (dyne/cm) 38.4
Molecular Weight: 258.3
Tg (℃) 46

Key Features Registration

- Good flexibility Korea (ECL) Listed


- Hydrophilic characteristic
1
USA (TSCA) Listed
1
Europe (EINECS) Listed

Japan (ENCS)
1 Listed
China (IECSC) 4 Listed

Major Applications Storage and Handling

- Coating: metal, optical, plastic, PVC floor, wood, paper, Product should be stored in a cool, dry place, away from
glass direct sunlight. The containers should be kept sealed
and if opened should be resealed tightly.
- Adhesives
Avoid direct exposure to the eyes and skin.
- OPV
- Inks Standard packing: 200kg in steel drum
- Electronics : Solder mask, photoresist

Miwon Specialty Chemical Co., Ltd. [email protected] www.miwonsc.com +82-31-479-9300 +82-31-472-0182

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses.
It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial
property rights must be observed. The properties in this TDS are for informative purposes only, and are not specifications.

Version 02/17

You might also like