Scribd
Upload
16 views

Setting Up A Wireless Network Client With Windows Vista and Windows 7

This document provides instructions for setting up a wireless network client with Windows Vista or Windows 7 to connect to FSU's wireless network called fsustudent. It recommends using a wireless network card that supports 802.11a/b/g or 802.11a/g standards. It also notes that users must install antivirus software and Windows updates. The steps include installing the network card and drivers, connecting to the fsustudent network, configuring security settings like WPA2-Enterprise and AES encryption, and entering credentials to log in.

Uploaded by

Emen Isnan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

Setting Up A Wireless Network Client With Windows Vista and Windows 7

This document provides instructions for setting up a wireless network client with Windows Vista or Windows 7 to connect to FSU's wireless network called fsustudent. It recommends using a wireless network card that supports 802.11a/b/g or 802.11a/g standards. It also notes that users must install antivirus software and Windows updates. The steps include installing the network card and drivers, connecting to the fsustudent network, configuring security settings like WPA2-Enterprise and AES encryption, and entering credentials to log in.

Uploaded by

Emen Isnan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Setting Up a Wireless Network Client with Windows Vista and Windows 7

(fsustudent wireless network)


To function with FSU’s wireless networks, it is recommended that users purchase a wireless network card that supports 802.11 a/b/g
or 802.11a/g.

FSU requires all network users to install and update an anti-virus program. A virus or spy-ware on a network will cause severe
performance issues. You should also install the latest Windows Updates from Microsoft. For virus and software update information
visit:
http://www.frostburg.edu/computing/cmpages

Windows Vista and Windows 7: Install the network card and install the drivers. Neither Windows Vista nor Windows 7 require
the Wireless Utility that comes with your network card. However, if the utility has already been installed, the following instructions
can still be used to configure your system.

Click on Start then choose Connect To from the Windows Vista or Windows 7 Desktop.

You will then see a screen similar to the one below:

1
Click on Set up a connection or network, then click on Manually connect to a wireless network

Type fsustudent (lower case) in the Network name field. Choose WPA2-Enterprise as the Security type. Choose AES (or TKIP if
your wireless card doesn't support AES) as the Encryption type. Then click Next to continue.

You will see a message that you have successfully added fsustudent. On this screen, click Change connection settings

2
Uncheck the box next to Connect to a more preferred network is available then click on the Security tab.

Choose Protected EAP (PEAP) as the authenication method. If more than one person will be using the computer you are
configuring, uncheck the box next to Cache user information for subsequent connections to this network. Next, click the Settings
button

3
On the following screen, remove the check mark in the box next to Validate server certificate, check the box next to Enable Fast
Reconnect, and in the Select Authentication Method box, select Secure password (EAP-MSCHAP v2). Then click the Configure
button.

It is very IMPORTANT that you UNcheck the box next to the Automatically use my Windows logon name and password. If you
fail to remove this check you will not be able to connect to the wireless.

4
Click the OK button until you have closed all dialog boxes. To finish connecting to the fsustudent wireless network, you will need
to enter your FSU credentials. You will see a connection bubble appear near your System Tray. Click on this bubble and enter your
username (ex: jdoe) and password to connect. Enter FROSTBURG or frostburg.edu as the Logon domain.

Please visit http://www.frostburg.edu/computing/cmpages to register your wireless computer on the network. The registration
process will ensure that your system is clean of viruses and spy-ware. If you have already registered the computer via the wired port,
you may not need to re-register.

You might also like