Scribd
Upload
75 views

Converting RSView32 or FactoryTalk

To convert an RSView32 or FactoryTalk View ME project to FactoryTalk View SE, the document outlines the following steps: 1. Create a new local SE application and select the import button to import a station application project. 2. For a network application, right click in the project pane and select New HMI Server, then select Import a project and click Next. 3. Select the project type from the drop down list to import a distributed application project. The document also provides related technical notes for importing graphics and guidelines for conversion.

Uploaded by

Lucas Antonio de Albuquerque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

Converting RSView32 or FactoryTalk

To convert an RSView32 or FactoryTalk View ME project to FactoryTalk View SE, the document outlines the following steps: 1. Create a new local SE application and select the import button to import a station application project. 2. For a network application, right click in the project pane and select New HMI Server, then select Import a project and click Next. 3. Select the project type from the drop down list to import a distributed application project. The document also provides related technical notes for importing graphics and guidelines for conversion.

Uploaded by

Lucas Antonio de Albuquerque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

09/04/2018 46786 - Converting RSView32 or FactoryTalk View ME Projects to FactoryTalk View SE

Converting RSView32 or FactoryTalk View ME Projects to FactoryTalk View SE


46786 | Date Created: 11/29/2007 | Last Updated: 04/09/2018
Access Level: TechConnect

Question
How to convert RSView32 or FactoryTalk View ME project to FactoryTalk View SE?

Answer
For FactoryTalk View SE station application
1. Create a new local SE application, type in the application name and choose the import button option located towards the bottom of the popup:

2. Choose the type of project you're importing, browse to the project and choose it.

For FactoryTalk View SE network (distributed) application:


1. Right-click an area and select New HMI Server...

2. Select Import a project

https://rockwellautomation.custhelp.com/app/answers/detail/a_id/46786 1/3
09/04/2018 46786 - Converting RSView32 or FactoryTalk View ME Projects to FactoryTalk View SE

3. And click Next

4. Click OK

5. Select Project type from drop down list box.

Related TechNotes:
46207 - Import RSView32/FactoryTalk View SE graphics into FactoryTalk View SE (//rockwellautomation.custhelp.com/app/answers/detail/a_id/46207)
27708 - RSView32 to FactoryTalk View SE Conversion Guidelines (//rockwellautomation.custhelp.com/app/answers/detail/a_id/27708)
32590 - FactoryTalk View ME to FactoryTalk View SE Conversion - Reproduce some of the common FactoryTalk View ME functionality
(//rockwellautomation.custhelp.com/app/answers/detail/a_id/32590)

DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such
subjects. Accordingly, the information in this web site is not intended to constitute application, design, software or other professional engineering advice or services.
Before making any decision or taking any action, which might affect your equipment, you should consult a qualified professional advisor.

ROCKWELL AUTOMATION DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE DATA CONTAINED IN THIS WEB SITE
AND MAY MAKE CHANGES THERETO AT ANY TIME IN ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS
PROVIDED TO USERS "AS IS." IN NO EVENT SHALL ROCKWELL BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS PROFIT OR DAMAGE, EVEN IF ROCKWELL AUTOMATION HAVE BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

ROCKWELL AUTOMATION DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED IN RESPECT OF THE INFORMATION (INCLUDING
SOFTWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-
INFRINGEMENT. Note that certain jurisdictions do not countenance the exclusion of implied warranties; thus, this disclaimer may not apply to you.

https://rockwellautomation.custhelp.com/app/answers/detail/a_id/46786 2/3
09/04/2018 46786 - Converting RSView32 or FactoryTalk View ME Projects to FactoryTalk View SE
If you have a problem with this page, please use this link (mailto:[email protected]?
Subject=Problems%20with%20web%20page%20%2Fapp%2Fanswers%2Fdetail%2Fa_id%2F46786&Body=%28Please%20include%20steps%20to%20reproduce%20and
to report it to us by email.

This page is best viewed in Internet Explorer 11, Edge, Firefox 41, Chrome 46, Safari 9 or newer.

https://rockwellautomation.custhelp.com/app/answers/detail/a_id/46786 3/3

You might also like