TECHNICAL DATA

Fluke 789 ProcessMeter™

Key features
Compact digital multimeter and mA loop calibrator solution
Full-featured mA loop calibrator with built-in 24v Loop Power
Quickly and easily troubleshoot every part of a control loop
Large, bright dual-measurement display

Product overview: Fluke 789 ProcessMeter™

Fluke 789 ProcessMeter™ doubles your troubleshooting power

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It
combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated
digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a
large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its
built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline
transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data
wirelessly to your smart phone and review it from a remote location.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke
representative.
Do a lot more while carrying a lot less

The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz,
Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot
every part of the loop.

Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-
ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing,
while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm
drive capability on mA source.

Accuracy

This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC
voltage accuracy and 0.05% DC current accuracy.

Specifications: Fluke 789 ProcessMeter™

Specifications

Range 0-1 A AC or DC

Resolution 1 mA

Accuracy 0.2% + 2 LSD (DC)

Current measurement
Range 0-30 mA

Resolution 0.001 mA

Accuracy 0.05% + 2 lSD

Range 0-20 mA or 4-20 mA

Current sourcing Resolution 0.05% of span

Drive capability 24 V Compliance or 1200 Ω @ 20 mA

Frequency to 19.999 kHz, 0.005% + 1 LSD

Continuity Beeps for resistance < 100 Ω

Range 0-1000 V AC (true-rms) or DC

Voltage measurement Resolution 0.1 mV to 1.0 V

Accuracy 0.1% Rdg + 1 LSD (VDC)

Resistance measurement to 40 MΩ, 0.2% + 1 LSD

Diode test 2.0 V shoes diode voltage drop

Display current and % of span Yes

Auto Step, Auto Ramp Yes

Environmental Specifications

Operating temperature -20°C to 55°C

Storage temperature -40°C to 60°C

2 Fluke Corporation Fluke 789 ProcessMeter™

https://www.fluke.com/en/product/calibration-tools/ma-loop-calibrators/fluke-789
 95% up to 30°C
75% up to 40°C
Humidity (without condensation)
45% up to 50°C
35% up to 55°C

Temperature coefficient 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)

Safety Specifications

Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and

Electrical safety
CAN/CSA C22.2 No 1010.1-92

IEC 1010-1 CAT III 1000 V

Overvoltage category
IEC 1010-1 CAT IV 600 V

Maximum voltage 1000 V RMS

Mechanical and General Specifications

Size (H x W x L) 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)

Weight 610 g (1.6 lbs)

Batteries 4 AA alkaline batteries

Warranty 3 years

Battery life 140 hours typical (measurement), 10 hours typical (sourcing 20 mA)

Random, 2 g, 5-500 Hz
Shock and vibration
1 meter drop test

3 Fluke Corporation Fluke 789 ProcessMeter™

https://www.fluke.com/en/product/calibration-tools/ma-loop-calibrators/fluke-789
Ordering information

Fluke 789
Fluke 789 ProcessMeter™

Includes:

AC175 Alligator Clips

Four (4) AA 1.5 V alkaline batteries (installed)
TL71 safety-designed test lead set

Fluke 789 CAL

Fluke 789 ProcessMeter™, with a traceable certificate of calibration with data from Fluke

Includes:

AC175 Alligator Clips

Four (4) AA 1.5 V alkaline batteries (installed)
TL71 safety-designed test lead set
A traceable certificate of calibration with data from Fluke

Optional accessories Description

Fluke ir3000 FC Connector Connect your Fluke test tool and get all the benefits of the Fluke Connect™ app.
Fluke TPAK ToolPak™ Magnetic Meter
Powerful magnetic strap for safe, hands free measurements.
Hanger
Fluke 80T-150UA Universal Temperature Compatible with Fluke DMMs, high accuracy and fast reading for low voltage
Probe (below 24 V AC, 60 V DC) applications.

Fluke TL220 SureGrip™ Industrial Test Lead This test lead set with test probes works in multiple electrical applications.
Set SureGrip™ feature is designed to do your work with comfort.

4 Fluke Corporation Fluke 789 ProcessMeter™

https://www.fluke.com/en/product/calibration-tools/ma-loop-calibrators/fluke-789
 Preventive maintenance simplified. Rework eliminated.

Save time and improve the reliability of your maintenance data by wirelessly syncing measurements using the
Fluke Connect™ system.

Eliminate data-entry errors by saving measurements directly from the tool and associating them with the
work order, report or asset record.
Maximize uptime and make confident maintenance decisions with data you can trust and trace.
Access baseline, historical and current measurements by asset.
Move away from clipboards, notebooks and multiple spreadsheets with a wireless one-step measurement
transfer.
Share your measurement data using ShareLive™ video calls and emails.

Find out more at flukeconnect.com

All trademarks are the property of their respective owners. WiFi or cellular service required to share data. Smartphone, wireless service and
data plan not included with purchase. First 5 GB of storage is free. Phone support details can be viewed at fluke.com/phones.

Smart phone wireless service and data plan not included with purchase. Fluke Connect is not available in all countries.

Fluke. Keeping your world up and running.®

Fluke Europe B.V. For more information call:

P.O. Box 1186 In Middle East/Africa
5602 BD Eindhoven +31 (0)40 267 5100
The Netherlands
www.fluke.com/en
©2023 Fluke Corporation. All rights reserved.
Data subject to alteration without notice.
09/2023

Modification of this document is not permitted

without written permission from Fluke Corporation.

5 Fluke Corporation Fluke 789 ProcessMeter™

https://www.fluke.com/en/product/calibration-tools/ma-loop-calibrators/fluke-789