EASA Part-147

Approved Training Programs

Certificate No. EASA.147.0027

Cornerstone of Your Aviation Career

EASA Approved Basic Training Programs
For Categories B1.1 Aeroplanes Turbine and B2 Avionics
These training programs are applicable to engineering apprentices or secondary students ab-initio. Upon
successful completion of either one of these, you can

Gain an EASA Part-147 Certificate of Recognition for Basic Training Course and/or Basic Examinations.
Shorten the years of experience for the issue of an EASA Part-66 Aircraft Maintenance Licence from 5 years to 2.
With the years of experience fulfilled, stand a good chance of obtaining the aforesaid Licence issued by UK-
CAA(EASA Member).
Go on to take aircraft type courses and make such qualifications meaningful.
Eventually start your career as an Aircraft Maintenance Engineer given confidence and persistence.
Note that:
A category B1 aircraft maintenance licence shall permit the holder to issue certificates of release to service following
maintenance, including aircraft structure, powerplant and mechanical and electrical systems. Replacement of avionic
line replaceable units, requiring simple tests to prove their serviceability, shall also be included in the privileges.
Category B1 shall automatically include the appropriate A subcategory.
A category B2 aircraft maintenance licence shall permit the holder to issue certificates of release to service following
maintenance on avionic and electrical systems.

Program Features
Knowledge training delivered to EASA standards by a team of experienced professionals
Modern teaching methods integrating learning psychology and computer aids
High quality hands-on training utilizing a comprehensive facility of “standard practices” workshop and aircraft
components, including Rolls-Royce and Pratt &Whitney engines, B747 landing gears, and fuel tank sections
Replication of real aircraft maintenance environment using a fixed-base B747 classic simulator, B737NG computer
based simulator and and B747-400 section 42/46 mockup
Practical on-the-job training with access to commercial aircraft in HAECO Xiamen aircraft maintenence hangars
Paperless module subject examinations directly at HAECO Xiamen Training Center

About EASA PART-66 Licence

EASA Part-66 licence system consists of following categories:
Category A: Line Maintenance Certifying Mechanic
Category B1: Line Maintenance Certifying Engineer-Mechanical
Category B2: Line Maintenance Certifying Engineer-Avionics
Category C: Basic Maintenance Certifying Engineer
Category B1 is divided into four subcategories, while HAECO Xiamen Training Center provides B1.1 and B2 training and
conduct examination:
B1.1 Aeroplanes Turbine
B2 Avionics
Basic knowledge requirements
An applicant for an aircraft maintenance licence shall demonstrate, by examination, a level of knowledge in the appropriate
subject modules in accordance with Appendix I to this Brochure.
Experience requirements
For category B1.1 and B2:
Five years of practical maintenance experience on operating aircraft if the applicant has no previous relevant technical
training; or
Two years of practical maintenance experience on operating aircraft and completion of a Part -147 approved basic
training course.
Examination Standard
All Part-66 modules that make up a complete Part-66 aircraft maintenance licence category must be passed within a 10
year time period of passing the first module. A failed module may not be retaken for at least 90 days following the date of
the failed module examination.
Program Details
Program Types
B1.1 Basic Training -Mechanical Course duration: Approx.2 years
B2 Basic Training -Avionics Start dates & fee: please visit our website for details (www.taecotraining.com)
B1.1 + A320 type (Optional) Visa requirements: F-type Business & X-type Student Visa
B2 + A320 type (Optional)

Qualifications
18 years old or above at the commencement of training
International students-minimum requirement of secondary schooling-SPM levels,10+2(Advanced Level Examination)
with Mathematics, and any one of the Science subjects. Forecast results can be accepted
Academic IELTS score of 5.5 with no band score below 5.0 or certification from an approved English pathway
program
Student must be in possession of a valid International Passport
Successfully compete the pre-entry assessment and pass the Physical check

Basic Training Modules

Theoretical Part
Course
Code
Course Title B1.1 B2 Venue
EM01 Mathematics Training Center
EM02 Physics Training Center
EM03 Electrical Fundamentals Training Center
EM04 Electronic Fundamentals Training Center
EM05 Digital Techniques/Electronic Instrument Systems Training Center
EM06 Materials and Hardware Training Center
EM07A Maintenance Practices Training Center
EM08 Basic Aerodynamics Training Center
EM09A Human Factors Training Center
EM10 Aviation Regulations Training Center
EM11A Aeroplane Aerodynamics/Structures/Systems Training Center
EM13 Aircraft Aerodynamics/Structures/Systems Training Center
EM14 Propulsion Training Center
EM15 Gas Turbine Engine Training Center
EM17A Propeller Training Center

Practical Part
Course
Course Title B1.1 B2 Venue
Code
EM03P Electrical Fundamentals- Practical Part Workshop/ Hangar
EM04P Electronic Fundamentals- Practical Part Workshop/ Hangar
EM05P Digital Techniques/Electronic Instrument Systems- Practical Part Workshop/ Hangar
EM06P Materials and Hardware- Practical Part Workshop/ Hangar
EM07P Maintenance Practices- Practical Part Workshop/ Hangar
EM11AP Turbine Aeroplane Aerodynamics,Structures and Systems- Practical Part Workshop/ Hangar
EM13P Aircraft Aerodynamics, Structures and Systems- Practical Part Workshop/ Hangar
EM14P Propulsion- Practical Part Workshop/ Hangar
EM15P Gas Turbine Engine- Practical Part Workshop/ Hangar
EM17AP Elements for Propeller- Practical Part Workshop/ Hangar
How to Register
Eligibility
An applicant for an aircraft maintenance licence shall be at least 18 years of age and
shall be at least high school level in a technical discipline with ability in reading English.

Examination
Students shall take the pre-entry assessment organized by HAECO Xiamen Training
Center (EASA Part-66 Exam Site) .

Application Form
Contact Local Agent
Visit www.taecotraining.com and download the Application Form.

Application Due Day Pass the Assessment

30 days before the commencement of the Course.

Provide certified Copies of All Documentation
Accommodation and Meal
Accommodation and meals shall be borne by the students. Sign Letter of Offer
HAECO Xiamen Training Center can provide hostel, each hostel
can accommodate up to 4 students. The HAECO Xiamen Pay Tuition Fee
Training Center Canteen can provide meals (including Halal
food).
Commence Your Study
There are many Chinese restaurants within 10 minutes walking
distance from HAECO Xiamen Training Center.

HAECO Xiamen Training Center

Blends the unique strengths of HAECO inXiamen, and the advantages of the group resources of
aircraft maintenance, landing gear overhaul and engine overhaul companies.
With a versatile team of nearly 70 full-time instructors, supports and renders training capabilities in a
multitude of training courses for aircraft types, basic license, practical skills, aviation English, human
factors and other aviation maintenance courses. Utilizing a comprehensive facility of “standard
practices” workshop and aircraft components，including Rolls-Royce and Pratt & Whitney engines,
B747 landing gears, B747-400 airframe, fuel tank, and B747 simulator, B787 desktop simulator, A320
desktop simulator, the Center can therefore simulate the real aircraft maintenance environment for
optimal training effects.
For more information, please visit us at http://www.taecotraining.com

Authorized Agent

15-2 Jalan 3/62A, Bandar Menjalara, 52200 Kuala Lumpur, Malaysia

Tel: +603-62801171 M/SMS/WApps: +6019-2221160
Email: [email protected] Web: www.iacpilot.com
/InternationalAviationCentre

VER. E-A-05-2015-001