0% found this document useful (0 votes)
14 views

2022 Mechanics Mid Sem

Mechanics paper

Uploaded by

Anand Tatipaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
14 views

2022 Mechanics Mid Sem

Mechanics paper

Uploaded by

Anand Tatipaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Indian Institute of Technology Bhubaneswar School of Mechanical Sciences Argul, Jatni = 752050, Odisha Mid Semester Examination (Autumn 2022-24) Subject: Mechanies (ME1L001) Date : 29° December, 2022 (Thursday) Duration 120 Wilnuite 0.00 AM ~ 12.00 Noon (Forenoon) Full Marks | 60 (2 minutos ‘VANS MET NST ERY A ‘Many, telat Hino aldistussyll dn init axon allie” intl sccounnlnnsyaluation, Mumafeal tauruei Q. 1. Determine the force (R )- couple (Mo) system at 0 which Is equivalent to the two forces applied to the shaft ‘AOB as shown in the figure. Is R perpendicular to Mg? Determine the coordinates of the polnt in the x ~ 7 plane through which the line of action of the resultant of the system passes, (tasks: 15) Q. 2. The bearing of lever ABD is free to slide along and to rotate about the horizontal pin at &. Knowing that the 24.N force lies in a plane parallel to the x — y plane and that the bearing can exert couples about the y ~ and z — axes, determine (a) the forces in the stretched springs CF and DE, (b) the reactions at 8. (Marks: 15) Pawe tof p n members CB, CG, and FG for the loaded truss without first calculating the force in any. me the pulleys to be frictionless, [Marks: 15] ached to the plate B of mass Ms= 20kg passes over a fixed peg at C, and is attached to the block ne coefficients of static friction shown, determine the smallest mass of block A so that it will nt sliding motion of B down the plane. Assume Ha = 0.20, Hy = 0.30, te = 0.30,8 = 30°,g = (Marks: 15]

You might also like