AD935
AD935
AKSA Power Generation has been producing industrial generator sets with an innovative compact design and
excellence in quality for over 30 years. AKSA has been providing reliable power through three main production plants
and over 15 branch offices worldwide.
General Characteristics
Control Panel Model DSE 7320 Base Frame / Enclosure AKSA MS85 / AK90
Standby
Engine Alternator Voltage Standby Power Prime Power
Current
The Generator set is designed and manufactured in a facility certified to ISO9001 standards.
The Generator set is designed and manufactured in a facility certified to ISO14001:2015 standards.
AKSA Power Generation provides single source responsibility for the generator set & accessories.
The generator set, with its components, are prototype tested and production tested
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
www.aksausa.com www.aksalatam.com
AD935-6
Aspiration Turbocharged&Intercooled
Pressure Cap Setting 49 kPa
Compression Ratio 15: 1
Coolant Capacity 114 L
Bore / Stroke 128 mm / 142 mm
Max Water Temperature 103 ˚C
Break Mean Effective Pressure 2.52 Mpa
Thermostat Range 71– 85 ˚C
Mean Piston Speed 8.5 m/s
Fuel Consumption
Max Intake Air Restriction 2.16 kPa – Clean Element Prime Power (100%) 183.2 L/h
Max Intake Air Restriction 6.23 kPa – Dirty Element Prime Power (75%) 134.4 L/h
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
www.aksausa.com www.aksalatam.com
AD935-6
A.V.R. AS440
Controller Features & Benefits
Voltage Regulation ±1%
Microprocessor controlled
Insulation System Class H
Waveform Distortion No Load < 1.5 % Front panel editing with PIN protection
Maximum Over speed 2250 rev/min Support up to three remote display modules
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
www.aksausa.com www.aksalatam.com
AD935-6
Heavy Duty Steel Structure Internally Mounted Exhaust System with Rain Cap
Plastic Covered Corrosion Resistant Locks & Hinges Easy Access for Maintenance
Length 3470 mm
Width 1550 mm
Height 2301 mm
Length 5250 mm
Width 1605 mm
Height 2656 mm
Length 6500 mm
Width 2200 mm
Height 2353 mm
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
www.aksausa.com www.aksalatam.com
AD935-6
Battery Charger
Fuel Water Separator Filter
Radiator fill cap on enclosure
Auto Fuel Fill Control System
Anti Vibration Pads between Engine/Alternator & Base Frame
Oil Temperature Display on Controller
Residential Grade Silencer Inside Enclosure
Manual Speed Adjust Rheostat
Industrial Grade Silencer Set for Open Skid Sets
Manual Voltage Adjust Rheostat
Sound Absorb Foam for Enclosure
Remote Annunciator Panel
Air Inlet & Outlet Rodent Guards
Remote Control & Monitoring Panel
Oil Drain Valve
Advanced SMS Messaging
Coolant Drain Valve
Control Panel Heater
Flex Fuel Lines
Battery Heater
Engine Manifold Cover
24 Months / 2000 hours Limited Standby Warranty Automatic Transfer Panel (ATS) – Changeover Design
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
Aksa Power Generation USA Aksa Power Generation Aksa Power Generation LATAM
371 Exchange Street, West Monroe, LA 71292 USA & LATAM 12320 NW 116th Street, Miami, FL 33178
T: + 1 318 8558377 a member of T: + 1 786 4936857
[email protected] [email protected]
*Manufacturer reserves the right to make changes in model, technical specifications, color, equipment and accessories without prior notice.
www.aksausa.com www.aksalatam.com