Scribd
Upload
32 views

Steps For Importing and Exporting Driver Parameters

Uploaded by

01689373477
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

Steps For Importing and Exporting Driver Parameters

Uploaded by

01689373477
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Steps for importing and exporting

driver parameters
Export old drive parameters
Step 1: Connect drives that require parameters to be
exported.

Step 2: Select Parameter Page, select any row. Wait for all
parameters to turn black. Return to the connection page.
Step 3: Click the Save As button.

Step 4: Wait for the progress bar to be full.


Step 5: Select the appropriate path for the parameters to
be saved and save them.
Import parameters to a new drive
Step 1: Connect to a new drive and choose to import the
saved parameter file.
Step 2: After connecting, check whether the imported
parameter file path is correct.

Step 3: Click the writeToEEPROM button.


Step 4: Select OK and wait for the progress bar to fill.
Step 5: Until the progress bar is full, and the parameter
download is complete appears in the lower left corner.

Step 6: Enter the parameter interface and click the Save


button in the lower left corner.
Matters needing attention
The parameter import and export function is only

applicable when the same driver matches the same motor. This

function is not available when either driver or motor has

changed.

After importing parameters, you can check the rated

current settings to determine whether the parameters were

successfully imported. If conditions permit, you can use the

imported drive for a trial run to ensure successful parameter

import.

This function is only for import and export of a single

drive. You cannot write to multiple drives simultaneously.

You might also like