Types of Capacitors and Their Use Re3
Types of Capacitors and Their Use Re3
SNUBBER capacitors are used in applications where high pulse loadings and
high frequencies are presented. Their purpose is to eliminate voltage spikes,
which are caused by semiconductors or other devices.
https://www.iskra.eu/en/capacitor/snubber-capacitors
DC LINK CAPACITORS
KNG
DC/AC inverters for:
- Wind, solar power plants - Hybrid vehicles
- Welding equipment - IGBT modules
- UPS systems - Frequency inverters etc.
https://www.iskra.eu/en/capacitor/dc-link-capacitors
Surge protection for large motors and generators, MV switchgear and motor
control centers, large transformers
Inductive heating.
https://www.iskra.eu/en/capacitor/power-electronic-capacitors
https://www.iskra.eu/en/capacitor/moto-capacitors
https://www.iskra.eu/en/capacitor/capacitors-in-electronics
https://www.iskra.eu/en/capacitor/capacitors-in-automotive-applications
EMI RFI Capacitors and Filters for radio-interference suppression clas X1, X2,
X1Y2, Y1 are used in home appliances, electrical hand tools and
DC electromotors.
https://www.iskra.eu/en/capacitor/radio-interference-suppression-filter
https://www.iskra.eu/en/components-for-radio-interference-suppression
Power factor correction (PFC) aims to improve power factor, and therefore
power quality. It reduces the load on the electrical distribution system,
increases energy efficiency and reduces electricity costs. It also decreases
the likelihood of instability and failure of equipment.
https://www.iskra.eu/en/Power-factor-correction/power-factor-corrections