Piping and Instrumentation Drawings

Version: V7.1
January 2009
Copyright (c) 2001-2009 by Aspen Technology, Inc. All rights reserved.
Aspen Capital Cost Estimator, Aspen Process Economic Analyzer, and the aspen leaf logo are trademarks or registered trademarks of Aspen Technology, Inc.,
Burlington, MA.
All other brand and product names are trademarks or registered trademarks of their respective companies.
This manual is intended as a guide to using AspenTech's software. This documentation contains AspenTech proprietary and confidential information and may not
be disclosed, used, or copied without the prior consent of AspenTech or as set forth in the applicable license agreement. Users are solely responsible for the
proper use of the software and the application of the results obtained.
Although AspenTech has tested the software and reviewed the documentation, the sole warranty for the software may be found in the applicable license
agreement between AspenTech and the user. ASPENTECH MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED,
WITH RESPECT TO THIS DOCUMENTATION, ITS QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.

Corporate
Aspen Technology, Inc.
200 Wheeler Road
Burlington, MA 01803-5501
Phone: 781-221-6400
Toll Free: 888-996-7100
URL: http://www.aspentech.com
Contents
Introduction ............................... V
Drawings ....................................1
Appendix A: Symbols .............185
Appendix B: Abbreviations .....187
Index ......................................191
 P&IDs come in either a standard (STD) or a more fully
instrumented (FULL) configuration that may be specified at the
Introduction Project and Area levels. Both the standard and full versions are
shown in this book. The 600 series drawings represent the full
Note: The drawings represented in the following document are versions.
superseded by the drawings contained in the
AspenTech\Economic Evaluation V7.0\Program\Docs\PIDs
folder. Please refer to this location for the latest drawing
revisions. This document should be used solely as a drawing
reference for internal volumetric models not depicted
elsewhere.
This book contains piping and instrumentation drawings
(P&IDs) representing Aspen Icarus Volumetric Models.
Volumetric Models develop material quantities and are based
on recognized design methods and construction standards.
Volumetric Models are the key components behind Aspen
Icarus’ unique method of designing and estimating.
Volumetric Models determine the field materials (type,
quantity, weights, and sizes) required to install an equipment
item. Volumetric Models generate the material takeoff for
equipment handling and setting, piping, civil, structural steel,
instrumentation, electrical, insulation and paint materials. For
example, a tower’s pipe diameter and length is determined by
the diameter, height, pressure, temperature, number of trays,
and estimated flow rates. Each run of pipe is consistent with
the tower materials, and of a specific length, diameter,
schedule, valve, and fitting count, and so on, to fulfill the
functionality assigned to that line of pipe. Thus, the Volumetric
Models create materials to be installed.

Icarus Piping and Instrumentation Drawings v

 stranded copper wire are used for the control system. You may
specify the type of wiring in the Area date. If “IM” is selected,
How Project Instrumentation is Developed the complete control wiring system is costed using control wire
and multi-conductor cable. The twisted pair consists of
Aspen Icarus systems develop the cost of project stranded copper wire with a mylar tape separator and an
instrumentation based upon the direct costs of materials and extruded PVC jacket.
manpower for the following major items:
• Primary element hook-up Signal Transmission
• Signal transmission At each junction box, the system differentiates between
• Field/panel hook-up Control and Indicating function for grouping into multi-tube
• Final element hook-up bundles to be sent to the Control Building for connection to the
• Control Center back of the control panel. For example, two tubes are required
• Operator Center for the transmission signal of a control loop from a junction
Primary Element Hook-Up box: one tube for the process transmitter signal to the control
and another tube for the control signal from the controller to
The primary element is a field-mounted component with all the the final element, as opposed to an indicating loop that is
necessary accessories for process connection and signal “deadended” at the indicating instrument in the control panel
transmission to a centrally located field junction box. For and requires only one tube for signal transmission. Pneumatic
pneumatic systems, it includes all the piping, tubing, fittings, transmission tubing is 0.25 INCHES [8 MM] OD, singly or
valves, and filter-regulators necessary for connecting the bundled. If the transmission distance between Control Center
impulse piping and air supply to the transmitter, and the and the field junction box exceeds 300 FEET [90 M], the
process signal tubing to the field junction box. Aspen Icarus system provides a WARNing message. In such an instance,
systems group this process signal tubing into one or more field you should consider using an electronic system rather than a
junction boxes. For electronic systems, the system assumes a pneumatic control system to improve dynamic response. The
two-wire control loop where power for the transmitter is taken type of control system, electronic or pneumatic, is specified in
from a power supply in the Control Center. A 4-20 ma DC the Area data.
signal is assumed. Aspen Icarus systems calculate material and
manpower costs for fabricating and installing all pipe, valves, Like pneumatic systems, electronic systems differentiate
and fittings for the impulse piping connection to the between the different types of instrumentation loops. For
transmitter, and all wiring and electrical fittings to the field example, in control loops, two pairs of signal transmission wire
junction box. Single or multiple twisted pairs of insulated are required: one pair for the transmitter signal and the other
pair for the control signal. Both pairs tie-in in the junction box

vi Icarus Piping and Instrumentation Drawings

back of the control panel to the field junction box located in the
Area. At the field junction box, the transmission wires are
collected and sent to the control room in multi-conductor cable
in conduit or on cable trays. Aspen Icarus systems allow the
user to select three different types of cables for transmission:
multi-conductor wire; cable with interlocked armor; and cable
pulled in rigid conduit.
Field/Panel Hook-Up
Aspen Icarus systems calculate the material and man-power
cost for connecting each tube from the multi-tube bundle to the
bulkhead plate in back of the control panel in the main control
building. For an electronic control system, the system
calculates the cost of material and manpower to connect all
signal wiring to and from the field junction box to the field
tie-in terminal blocks on the back of the panel.
Final Element Hook-Up
For pneumatic systems, system calculates the material and
manpower cost to fabricate and assemble the piping, valves,
and fittings required for the air supply and control signal from
the junction box.
Aspen Icarus systems make the same calculations for electronic
systems, with the exception that the control signal is wired
from the junction box to an electopneumatic transducer
mounted on the valve positioner valve.

Icarus Piping and Instrumentation Drawings vii

Analog Control Center Thermocouple Wiring
The cost of the control panel is developed from: On temperature control loops where thermocouples are used as
sensing devices, the transmitter is assumed to be mounted on
• The list of instruments, either electronic, pneumatic, or
the thermocouple head.
a combination of these control systems.
• The type of display: conventional, semi-graphic, or full
graphic type.
Aspen Icarus systems assume straight type panels and
conventional miniature instruments with an instrument density
of 4.75 per linear foot [15.6 per meter] for conventional
displays, 3.75 per linear foot [12.3 per meter] for semi-graphic
displays, and 2.5 per linear foot [8.2 per meter] for full graphic
displays. The total number and cost of panel-mounted
instruments is reported apart from the size and cost of the
control panel. The cost of the control panel includes the
hardware cost of all switches, relays, alarms, power supplies,
etc., required for all designated Areas in the facility, It also
includes the cost of sheet metal fabrication, piping and/or
wiring, and the cost of shipping and installation at the job site.

Local Equipment Panels

Aspen Icarus systems calculate the cost of material and
manpower for the fabrication and installation of each local
equipment panel and any wiring or pneumatic piping
connections for alarms, switches, indicators, etc., to the main
control panel.

viii Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings ix
Drawings
The piping and instrumentation drawings that follow are arranged in numeric order. For easy reference, the 600 series drawings,
representing fully instrumented models, immediately follow the corresponding standard models. For example, Drawing 603
immediately follows Drawing 3.

Icarus Piping and Instrumentation Drawings 1

3 Kettle Reboiler

2 Icarus Piping and Instrumentation Drawings

603 Kettle Reboiler

Icarus Piping and Instrumentation Drawings 3

4 Horizontal Pressure Vessel – Continuous

4 Icarus Piping and Instrumentation Drawings

604 Horizontal Pressure Vessel – Continuous

Icarus Piping and Instrumentation Drawings 5

4 Horizontal Jacketed Pressure Vessel - Continuous

6 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 7
604 Horizontal Jacketed Pressure Vessel – Continuous

8 Icarus Piping and Instrumentation Drawings

5 Horizontal Pressure Vessel – Batch

Icarus Piping and Instrumentation Drawings 9

5 Horizontal Jacketed Pressure Vessel – Batch

10 Icarus Piping and Instrumentation Drawings

5 Vertical Pressure Vessel – Batch

Icarus Piping and Instrumentation Drawings 11

5 Vertical Jacketed Pressure Vessel – Batch

12 Icarus Piping and Instrumentation Drawings

6 Vertical Pressure Vessel – Continuous

Icarus Piping and Instrumentation Drawings 13

14 Icarus Piping and Instrumentation Drawings
606 Vertical Pressure Vessel – Continuous

Icarus Piping and Instrumentation Drawings 15

6 Vertical Jacketed Pressure Vessel – Continuous

16 Icarus Piping and Instrumentation Drawings

606 Vertical Jacketed Pressure Vessel – Continuous

Icarus Piping and Instrumentation Drawings 17

7 Utility Boiler Unit

18 Icarus Piping and Instrumentation Drawings

7A Utility Boiler Unit

Icarus Piping and Instrumentation Drawings 19

7B Utility Boiler Unit

20 Icarus Piping and Instrumentation Drawings

7C Utility Boiler Unit

Icarus Piping and Instrumentation Drawings 21

8 Compressor

22 Icarus Piping and Instrumentation Drawings

8A Compressor

Icarus Piping and Instrumentation Drawings 23

9 Air Cooled Heat Exchanger

24 Icarus Piping and Instrumentation Drawings

609 Air Cooled Heat Exchanger

Icarus Piping and Instrumentation Drawings 25

10 Horizontal Pressure Vessel – Receiver

26 Icarus Piping and Instrumentation Drawings

10 Horizontal Jacketed Pressure Vessel – Receiver

Icarus Piping and Instrumentation Drawings 27

28 Icarus Piping and Instrumentation Drawings
10 Vertical Pressure Vessel – Receiver

Icarus Piping and Instrumentation Drawings 29

10 Vertical Jacketed Pressure Vessel – Receiver

30 Icarus Piping and Instrumentation Drawings

11 Shell & Tube Heat Exchanger

Icarus Piping and Instrumentation Drawings 31

611 Shell & Tube Heat Exchanger

32 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 33
12 Process Heater Furnace

34 Icarus Piping and Instrumentation Drawings

612 Process Heater Furnace

Icarus Piping and Instrumentation Drawings 35

36 Icarus Piping and Instrumentation Drawings
13 Waste Heat Boiler

Icarus Piping and Instrumentation Drawings 37

38 Icarus Piping and Instrumentation Drawings
14 Water Chiller

Icarus Piping and Instrumentation Drawings 39

614 Water Chiller

40 Icarus Piping and Instrumentation Drawings

15 Cooling Tower

Icarus Piping and Instrumentation Drawings 41

42 Icarus Piping and Instrumentation Drawings
615 Cooling Tower

Icarus Piping and Instrumentation Drawings 43

 16 Motor Driven Centrifugal Pump

44 Icarus Piping and Instrumentation Drawings

616 Motor Driven Centrifugal Pump

Icarus Piping and Instrumentation Drawings 45

46 Icarus Piping and Instrumentation Drawings
616 Motor Driven Spare Centrifugal Pump

Icarus Piping and Instrumentation Drawings 47

48 Icarus Piping and Instrumentation Drawings
17 Turbine (>500 HP, 375 KW)

Icarus Piping and Instrumentation Drawings 49

18 Storage Vessel

50 Icarus Piping and Instrumentation Drawings

19 Horizontal Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 51

52 Icarus Piping and Instrumentation Drawings
619 Horizontal Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 53

19 Horizontal Jacketed Pressure Vessel – Storage

54 Icarus Piping and Instrumentation Drawings

619 Horizontal Jacketed Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 55

19 Vertical Pressure Vessel – Storage

56 Icarus Piping and Instrumentation Drawings

619 Vertical Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 57

58 Icarus Piping and Instrumentation Drawings
19 Vertical Jacketed Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 59

60 Icarus Piping and Instrumentation Drawings
619 Vertical Jacketed Pressure Vessel – Storage

Icarus Piping and Instrumentation Drawings 61

20 Pumps – Gear & Positive Displacement

62 Icarus Piping and Instrumentation Drawings

21 Reciprocating Compressor

Icarus Piping and Instrumentation Drawings 63

621 Reciprocating Compressor

64 Icarus Piping and Instrumentation Drawings

22 Horizontal Pressure Vessel – Knockout

Icarus Piping and Instrumentation Drawings 65

622 Horizontal Pressure Vessel – Knockout

66 Icarus Piping and Instrumentation Drawings

22 Horizontal Jacketed Pressure Vessel – Knockout

Icarus Piping and Instrumentation Drawings 67

622 Horizontal Jacketed Pressure Vessel – Knockout

68 Icarus Piping and Instrumentation Drawings

22 Vertical Pressure – Knockout

Icarus Piping and Instrumentation Drawings 69

622 Vertical Pressure Vessel – Knockout

70 Icarus Piping and Instrumentation Drawings

22 Vertical Jacketed Pressure Vessel – Knockout

Icarus Piping and Instrumentation Drawings 71

622 Vertical Jacketed Pressure Vessel – Knockout

72 Icarus Piping and Instrumentation Drawings

23 Enclosed Jacket Reactor – Continuous

Icarus Piping and Instrumentation Drawings 73

623 Enclosed Jacket Reactor – Continuous

74 Icarus Piping and Instrumentation Drawings

23 Open Top Jacket Reactor – Continuous

Icarus Piping and Instrumentation Drawings 75

23 Open Top Jacket Reactor – Continuous

76 Icarus Piping and Instrumentation Drawings

24 Refrigeration Compressor

Icarus Piping and Instrumentation Drawings 77

26 Vessel Heater

78 Icarus Piping and Instrumentation Drawings

27 Motor Driven In-Line Pump

Icarus Piping and Instrumentation Drawings 79

627 Motor Driven In-Line Pump

80 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 81
28 Particulate Scrubber

82 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 83
29 Screw Conveyor

84 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 85
30 Plate and Frame Filter

86 Icarus Piping and Instrumentation Drawings

31 Water-Sealed Vacuum Pump

Icarus Piping and Instrumentation Drawings 87

32 Fans and Blowers

88 Icarus Piping and Instrumentation Drawings

33 Cloth Bay Baghouse Dust Collector

Icarus Piping and Instrumentation Drawings 89

34 Cyclone Dust Collector

90 Icarus Piping and Instrumentation Drawings

36 Live Bottom Bin

Icarus Piping and Instrumentation Drawings 91

37 Cone Bottom Vessel

92 Icarus Piping and Instrumentation Drawings

38 Centrifuge Precipitator

Icarus Piping and Instrumentation Drawings 93

39 Horizontal Plate Filter

94 Icarus Piping and Instrumentation Drawings

40 Automatic Batch Centrifuge

Icarus Piping and Instrumentation Drawings 95

96 Icarus Piping and Instrumentation Drawings
41 Manually Operated Centrifuge

Icarus Piping and Instrumentation Drawings 97

45 Fabric Cartridge Filter

98 Icarus Piping and Instrumentation Drawings

46 Tubular Fabric Filter

Icarus Piping and Instrumentation Drawings 99

48 Smokeless Flare

100 Icarus Piping and Instrumentation Drawings

51 DDT – Gas Adsorption Service

Icarus Piping and Instrumentation Drawings 101

51 Tower – Gas Adsorption Service

102 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 103
52 DDT – Liquid Adsorption Service

104 Icarus Piping and Instrumentation Drawings

52 Tower – Liquid Adsorption Service

Icarus Piping and Instrumentation Drawings 105

53 DDT – Extraction Service

106 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 107
53 Tower – Extraction Service

108 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 109
54 DDT – Absorber Service

110 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 111
54 Tower – Absorber Service

112 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 113
55 DDT – Stripper with Therm. RB

114 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 115
55 Tower – Stripper with Therm. RB

116 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 117
56 DDT – Desorber Service

118 Icarus Piping and Instrumentation Drawings

56 Tower – Desorber Service

Icarus Piping and Instrumentation Drawings 119

57 Horizontal Thermosiphon Reboiler

120 Icarus Piping and Instrumentation Drawings

57 Vertical Thermosiphon Reboiler

Icarus Piping and Instrumentation Drawings 121

122 Icarus Piping and Instrumentation Drawings
59 DDT – Distillation with Therm. RB

Icarus Piping and Instrumentation Drawings 123

124 Icarus Piping and Instrumentation Drawings
659 DDT – Distillation with Therm. RB

Icarus Piping and Instrumentation Drawings 125

59 Tower – Distillation with Therm. RB

126 Icarus Piping and Instrumentation Drawings

659 Tower – Distillation with Therm. RB

Icarus Piping and Instrumentation Drawings 127

128 Icarus Piping and Instrumentation Drawings
60 Continuous Centrifuge

Icarus Piping and Instrumentation Drawings 129

130 Icarus Piping and Instrumentation Drawings
61 Mill

Icarus Piping and Instrumentation Drawings 131

62 Liquid Cyclone Separator

132 Icarus Piping and Instrumentation Drawings

63 Flotation Cell

Icarus Piping and Instrumentation Drawings 133

64 Conditioning Cell

134 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 135
65 Crusher

136 Icarus Piping and Instrumentation Drawings

66 Scale

Icarus Piping and Instrumentation Drawings 137

138 Icarus Piping and Instrumentation Drawings
67 Turbine (<500 HP, 375 KW)

Icarus Piping and Instrumentation Drawings 139

68 Enclosed Reactor Vessel – Continuous

140 Icarus Piping and Instrumentation Drawings

 Jacket: See Drawing 23 and 623

Icarus Piping and Instrumentation Drawings 141

668 Enclosed Reactor Vessel – Continuous

142 Icarus Piping and Instrumentation Drawings

 Jacket: See Drawing 23 and 623

Icarus Piping and Instrumentation Drawings 143

68 Open Top Reactor Vessel – Continuous

Jacket: See Drawing 23 and 623

144 Icarus Piping and Instrumentation Drawings

668 Open Top Reactor Vessel – Continuous

Jacket: See Drawing 23 and 623

Icarus Piping and Instrumentation Drawings 145

69 Non-Smokeless Flare

146 Icarus Piping and Instrumentation Drawings

70 DDT – Distillation with Kettle RB

Icarus Piping and Instrumentation Drawings 147

148 Icarus Piping and Instrumentation Drawings
670 DDT – Distillation with Kettle RB

Icarus Piping and Instrumentation Drawings 149

70 Tower – Distillation with Kettle RB

150 Icarus Piping and Instrumentation Drawings

670 Tower – Distillation with Kettle RB

Icarus Piping and Instrumentation Drawings 151

71 DDT – Stripper with Kettle RB

152 Icarus Piping and Instrumentation Drawings

71 Tower – Stripper with Kettle RB

Icarus Piping and Instrumentation Drawings 153

72 Air Compressor

154 Icarus Piping and Instrumentation Drawings

73 Graphite Heat Exchanger

Icarus Piping and Instrumentation Drawings 155

74 Reactor Vessel – Batch

156 Icarus Piping and Instrumentation Drawings

74A Reactor Vessel – Batch

Icarus Piping and Instrumentation Drawings 157

74B Reactor Vessel – Batch

158 Icarus Piping and Instrumentation Drawings

74C Reactor Vessel – Batch

Icarus Piping and Instrumentation Drawings 159

74D Reactor Vessel – Batch

160 Icarus Piping and Instrumentation Drawings

75 Motor Water to Air Cooling

Icarus Piping and Instrumentation Drawings 161

76 Motor Driven Magnetic Drive Pipe

162 Icarus Piping and Instrumentation Drawings

676 Motor Driven Magnetic Drive Pump

Icarus Piping and Instrumentation Drawings 163

79 Cryogenic Storage Tank

164 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 165
80 Rectangular Tile Chest

166 Icarus Piping and Instrumentation Drawings

81 Cylindrical Tile Chest

Icarus Piping and Instrumentation Drawings 167

82 Vibrating Pressure Screen

168 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 169
83 Bow Screen – Low Consistency Stock Screen

170 Icarus Piping and Instrumentation Drawings

84 Deflaker

Icarus Piping and Instrumentation Drawings 171

85 Refiner

172 Icarus Piping and Instrumentation Drawings

88 Static Mixer

Icarus Piping and Instrumentation Drawings 173

92 Off Machine Pulper

174 Icarus Piping and Instrumentation Drawings

93 On Machine Pulper

Icarus Piping and Instrumentation Drawings 175

99 Rotary Blender

176 Icarus Piping and Instrumentation Drawings

100 Culinary Air Filter

Icarus Piping and Instrumentation Drawings 177

178 Icarus Piping and Instrumentation Drawings
101 Culinary (Sterile) Steam Filter F-6

Icarus Piping and Instrumentation Drawings 179

180 Icarus Piping and Instrumentation Drawings
102 Sanitary Pipe Filter

Icarus Piping and Instrumentation Drawings 181

182 Icarus Piping and Instrumentation Drawings
103 Sanitary Pipe Strainer

Icarus Piping and Instrumentation Drawings 183

104 Sanitary Filter Press

184 Icarus Piping and Instrumentation Drawings

105 In-Line Metal Trap

Icarus Piping and Instrumentation Drawings 185

186 Icarus Piping and Instrumentation Drawings
106 Fluming Reclaim Reel

Icarus Piping and Instrumentation Drawings 187

107 Shear Pump Homogenizer

188 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 189
108 Homogenizer – Piston Head

190 Icarus Piping and Instrumentation Drawings

109 High-Speed Mixer (“Norman”)

Icarus Piping and Instrumentation Drawings 191

110 Rotary Bowl/Mixer Blender

192 Icarus Piping and Instrumentation Drawings

111 Kettle Blender Without Steam Jacket

Icarus Piping and Instrumentation Drawings 193

194 Icarus Piping and Instrumentation Drawings
111 Kettle Blender With Steam Jacket

Icarus Piping and Instrumentation Drawings 195

112 Horizontal Ribbon Blender

196 Icarus Piping and Instrumentation Drawings

112 Jacket Horizontal Ribbon Blender

Icarus Piping and Instrumentation Drawings 197

113 Reversing Anchor Agitator

198 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 199
114 Double Motion Agitator

200 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 201
115 Fluming Pump

202 Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings 203
116 Air Diaphragm Sanitary Pump

204 Icarus Piping and Instrumentation Drawings

117 Sanitary Rotary Lobe Pump

Icarus Piping and Instrumentation Drawings 205

206 Icarus Piping and Instrumentation Drawings
118 Sanitary Centrifugal Pump With Flow Control

Icarus Piping and Instrumentation Drawings 207

208 Icarus Piping and Instrumentation Drawings
119 Sanitary Horizontal Tank

Icarus Piping and Instrumentation Drawings 209

210 Icarus Piping and Instrumentation Drawings
119 Jacket Sanitary Horizontal Tank

Icarus Piping and Instrumentation Drawings 211

212 Icarus Piping and Instrumentation Drawings
120 Sanitary Vertical Tank – Atmospheric Surge

Icarus Piping and Instrumentation Drawings 213

214 Icarus Piping and Instrumentation Drawings
120 Jacket Sanitary Vertical Tank – Atmospheric Surge

Icarus Piping and Instrumentation Drawings 215

216 Icarus Piping and Instrumentation Drawings
121 Sanitary Vertical Tank – Atmospheric Mixing

Icarus Piping and Instrumentation Drawings 217

218 Icarus Piping and Instrumentation Drawings
121 Jacket Sanitary Vertical Tank – Atmospheric Mixing

Icarus Piping and Instrumentation Drawings 219

220 Icarus Piping and Instrumentation Drawings
122 Super Sack Unloader With Screw Conveyor Discharge

Icarus Piping and Instrumentation Drawings 221

222 Icarus Piping and Instrumentation Drawings
123 Super Sack Unloader With Pneumatic Conveyance Discharge

Icarus Piping and Instrumentation Drawings 223

224 Icarus Piping and Instrumentation Drawings
124 Container Dumper – Column

Icarus Piping and Instrumentation Drawings 225

226 Icarus Piping and Instrumentation Drawings
125 Container Dumper – Hydraulic Drum

Icarus Piping and Instrumentation Drawings 227

228 Icarus Piping and Instrumentation Drawings
126 Container Dumper – Hydraulic Bin

Icarus Piping and Instrumentation Drawings 229

230 Icarus Piping and Instrumentation Drawings
127 Double Pipe Corrugated Exchanger

Icarus Piping and Instrumentation Drawings 231

232 Icarus Piping and Instrumentation Drawings
128 Direct Steam Injection (DSI) Exchanger

Icarus Piping and Instrumentation Drawings 233

234 Icarus Piping and Instrumentation Drawings
129 Plate & Frame Multizone Heat Exchanger

Icarus Piping and Instrumentation Drawings 235

236 Icarus Piping and Instrumentation Drawings
130 Hotwater Set With Shell & Tube Heat Exchanger

Icarus Piping and Instrumentation Drawings 237

238 Icarus Piping and Instrumentation Drawings
131 Fluming Dewatering Shaker

Icarus Piping and Instrumentation Drawings 239

240 Icarus Piping and Instrumentation Drawings
135 Sanitary Weight Belt Feeder

Icarus Piping and Instrumentation Drawings 241

242 Icarus Piping and Instrumentation Drawings
136 Sanitary Floor Scale

Icarus Piping and Instrumentation Drawings 243

244 Icarus Piping and Instrumentation Drawings
137 Sanitary Screw Feeder

Icarus Piping and Instrumentation Drawings 245

246 Icarus Piping and Instrumentation Drawings
138 Rotary Drum Cooker-Cooler

Icarus Piping and Instrumentation Drawings 247

248 Icarus Piping and Instrumentation Drawings
140 Gas Turbine With Combustion Chamber

Icarus Piping and Instrumentation Drawings 249

141 Horizontal Pressure Vessel With Boot

250 Icarus Piping and Instrumentation Drawings

141 Horizontal Jacketed Pressure Vessel With Boot

Icarus Piping and Instrumentation Drawings 251

Appendix A: Symbols
The symbols represented in Appendix A are superseded by the symbols depicted in the Radpfs program. See the Radpfs drawing
application for the latest and most complete drawing symbols.

Piping Symbols

Regulating Valve Rupture Disk

Pressure Safety Valve

Spectacle Blind

252 Icarus Piping and Instrumentation Drawings

 Check Valve

or

Flanged Connection

Reducer

Drain

Expansion Joint

Icarus Piping and Instrumentation Drawings 253

Instrument Symbols

Note: Displayed on Operator Center CRT

with Digital Controls

254 Icarus Piping and Instrumentation Drawings

Appendix B:
Abbreviations

Icarus Piping and Instrumentation Drawings 255

256 Icarus Piping and Instrumentation Drawings
Icarus Piping and Instrumentation Drawings 257
Index
003 Kettle Reboiler, 2 020 Pumps – Gear & Positive Displacement, 62
004 Horizontal Jacketed Pressure Vessel - Continuous, 8 021 Reciprocating Compressor, 63
004 Horizontal Pressure Vessel – Continuous, 4 022 Horizontal Jacketed Pressure Vessel – Knockout, 67
005 Horizontal Jacketed Pressure Vessel – Batch, 14 022 Horizontal Pressure Vessel – Knockout, 65
005 Horizontal Pressure Vessel – Batch, 12 022 Vertical Jacketed Pressure Vessel – Knockout, 71
005 Vertical Jacketed Pressure Vessel – Batch, 17 022 Vertical Pressure – Knockout, 69
005 Vertical Pressure Vessel – Batch, 16 023 Enclosed Jacket Reactor – Continuous, 73
006 Vertical Jacketed Pressure Vessel – Continuous, 23 023 Open Top Jacket Reactor – Continuous, 75, 76
006 Vertical Pressure Vessel – Continuous, 19 024 Refrigeration Compressor, 77
007 Utility Boiler Unit, 27 026 Vessel Heater, 78
007A Utility Boiler Unit, 29 027 Motor Driven In-Line Pump, 79
007B Utility Boiler Unit, 30 028 Particulate Scrubber, 81
007C Utility Boiler Unit, 31 029 Screw Conveyor, 82
008 Compressor, 32 030 Plate and Frame Filter, 83
008A Compressor, 33 031 Water-Sealed Vacuum Pump, 84
009 Air Cooled Heat Exchanger, 34 032 Fans and Blowers, 85
010 Horizontal Jacketed Pressure Vessel – Receiver, 37 033 Cloth Bay Baghouse Dust Collector, 86
010 Horizontal Pressure Vessel – Receiver, 36 034 Cyclone Dust Collector, 87
010 Vertical Jacketed Pressure Vessel – Receiver, 39 036 Live Bottom Bin, 88
010 Vertical Pressure Vessel – Receiver, 38 037 Cone Bottom Vessel, 89
011 Shell & Tube Heat Exchanger, 40 038 Centrifuge Precipitator, 90
012 Process Heater Furnace, 42 039 Horizontal Plate Filter, 91
013 Waste Heat Boiler, 44 040 Automatic Batch Centrifuge, 92
014 Water Chiller, 45 041 Manually Operated Centrifuge, 93
015 Cooling Tower, 47 045 Fabric Cartridge Filter, 94
016 Motor Driven Centrifugal Pump, 49 046 Tubular Fabric Filter, 95
017 Turbine (>500 HP, 375 KW, 52 048 Smokeless Flare, 96
018 Storage Vessel, 53 051 DDT – Gas Adsorption Service, 97
019 Horizontal Jacketed Pressure Vessel – Storage, 56 051 Tower – Gas Adsorption Service, 98
019 Horizontal Pressure Vessel – Storage, 54 052 DDT – Liquid Adsorption Service, 99
019 Vertical Jacketed Pressure Vessel – Storage, 60 052 Tower – Liquid Adsorption Service, 100
019 Vertical Pressure Vessel – Storage, 58 053 DDT – Extraction Service, 101

258 Icarus Piping and Instrumentation Drawings

053 Tower – Extraction Service, 102 080 Rectangular Tile Chest, 144
054 DDT – Absorber Service, 103 081 Cylindrical Tile Chest, 146
054 Tower – Absorber Service, 104 082 Vibrating Pressure Screen, 147
055 DDT – Stripper with Therm. RB, 105 083 Bow Screen – Low Consistency Stock Screen, 148
055 Tower – Stripper with Therm. RB, 106 084 Deflaker, 149
056 DDT – Desorber Service, 107 085 Refiner, 150
056 Tower – Desorber Service, 108 088 Static Mixer, 151
057 Horizontal Thermosiphon Reboiler, 109 092 Off Machine Pulper, 152
057 Vertical Thermosiphon Reboiler, 110 093 On Machine Pulper, 153
059 DDT – Distillation with Therm. RB, 111 099 Rotary Blender, 154
059 Tower – Distillation with Therm. RB, 113 100 Culinary Air Filter, 155
060 Continuous Centrifuge, 115 101 Culinary (Sterile) Steam Filter F-6, 156
061 Mill, 116 102 Sanitary Pipe Filter, 157
062 Liquid Cyclone Separator, 117 103 Sanitary Pipe Strainer, 158
063 Flotation Cell, 118 104 Sanitary Filter Press, 159
064 Conditioning Cell, 119 105 In-Line Metal Trap, 160
065 Crusher, 120 106 Fluming Reclaim Reel, 161
066 Scale, 121 107 Shear Pump Homogenizer, 162
067 Turbine (<500 HP, 375 KW), 122 108 Homogenizer – Piston Head, 163
068 Enclosed Reactor Vessel – Continuous, 123 109 High-Speed Mixer (“Norman”), 164
068 Open Top Reactor Vessel – Continuous, 125 110 Rotary Bowl/Mixer Blender, 165
069 Non-Smokeless Flare, 127 111 Kettle Blender Without Steam Jacket, 166
070 DDT – Distillation with Kettle RB, 128 112 Horizontal Ribbon Blender, 168
070 Tower – Distillation with Kettle RB, 130 112 Jacket Horizontal Ribbon Blender, 169
071 DDT – Stripper with Kettle RB, 132 113 Reversing Anchor Agitator, 170
071 Tower – Stripper with Kettle RB, 133 114 Double Motion Agitator, 171
072 Air Compressor, 134 115 Fluming Pump, 172
073 Graphite Heat Exchanger, 135 116 Air Diaphragm Sanitary Pump, 173
074 Reactor Vessel – Batch, 136 117 Sanitary Rotary Lobe Pump, 174
074A Reactor Vessel – Batch, 137 118 Sanitary Centrifugal Pump With Flow Control, 175
074B Reactor Vessel – Batch, 138 119 Jacket Sanitary Horizontal Tank, 177
074C Reactor Vessel – Batch, 139 119 Sanitary Horizontal Tank, 176
074D Reactor Vessel – Batch, 140 120 Jacket Sanitary Vertical Tank – Atmospheric Surge, 179
075 Motor Water to Air Cooling, 141 120 Sanitary Vertical Tank – Atmospheric Surge, 178
076 Motor Driven Magnetic Drive Pipe, 142

Icarus Piping and Instrumentation Drawings 259

121 Jacket Sanitary Vertical Tank – Atmospheric Mixing, 621 Reciprocating Compressor, 64
181 622 Horizontal Jacketed Pressure Vessel – Knockout, 68
121 Sanitary Vertical Tank – Atmospheric Mixing, 180 622 Horizontal Pressure Vessel – Knockout, 66
122 Super Sack Unloader With Screw Conveyor Discharge, 622 Vertical Jacketed Pressure Vessel – Knockout, 72
182 622 Vertical Pressure Vessel – Knockout, 70
123 Super Sack Unloader With Pneumatic Conveyance 623 Enclosed Jacket Reactor – Continuous, 74
Discharge, 183 627 Motor Driven In-Line Pump, 80
124 Container Dumper – Column, 184 659 DDT – Distillation with Therm. RB, 112
125 Container Dumper – Hydraulic Drum, 185 659 Tower – Distillation with Therm. RB, 114
126 Container Dumper – Hydraulic Bin, 186 668 Enclosed Reactor Vessel – Continuous, 124
127 Double Pipe Corrugated Exchanger, 187 668 Open Top Reactor Vessel – Continuous, 126
128 Direct Steam Injection (DSI) Exchanger, 188 670 DDT – Distillation with Kettle RB, 129
129 Plate & Frame Multizone Heat Exchanger, 189 670 Tower – Distillation with Kettle RB, 131
131 Fluming Dewatering Shaker, 191 676 Motor Driven Magnetic Drive Pump, 143
137 Sanitary Screw Feeder, 194 Abbreviations, 202
138 Rotary Drum Cooker-Cooler, 195 Absorber service
140 Gas Turbine With Combustion Chamber, 196 double diameter tower, 103
141 Horizontal Jacketed Pressure Vessel With Boot, 198 single diameter tower, 104
141 Horizontal Pressure Vessel With Boot, 197 AC. See Air Compressors (AC)
603 Kettle Reboiler, 3 Agitated Tanks (AT)
604 Horizontal Jacketed Pressure Vessel – Continuous, 10 COND CELL, 119
604 Horizontal Pressure Vessel – Continuous, 6 FLOAT CELL, 118
606 Vertical Jacketed Pressure Vessel – Continuous, 25 MACH PULP, 153
606 Vertical Pressure Vessel – Continuous, 21 MIXER, 125, 126, 136, 137, 138, 139, 140
609 Air Cooled Heat Exchanger, 35 OFF MACH, 152
611 Shell & Tube Heat Exchanger, 41 OPEN TOP, 75, 76, 125, 126
612 Process Heater Furnace, 43 REACTOR, 73, 74
614 Water Chiller, 46 Air Compressor, 134
615 Cooling Tower, 48 Air Compressors (AC)
616 Motor Driven Centrifugal Pump, 50 CENTRIF M, 32
616 Motor Driven Spare Centrifugal Pump, 51 CENTRIF T (See Drawings 17 and 67 for turbines), 32
619 Horizontal Jacketed Pressure Vessel – Storage, 57 RECIP GAS, 63, 64
619 Horizontal Pressure Vessel – Storage, 55 RECIP MOTOR, 63, 64
619 Vertical Jacketed Pressure Vessel – Storage, 61 SINGLE 1 S, 134
619 Vertical Pressure Vessel – Storage, 59 SINGLE 2 S, 134

260 Icarus Piping and Instrumentation Drawings

Air Cooled Heat Exchanger, 34, 35 TOP UNLOAD, 93
Air Diaphragm Sanitary Pump, 173 VIBRATORY, continuous, 115
ANSI magnetic drive pump, 142, 143 Check valve
AT. See Agitated Tanks (AT) piping symbol, 199
Automatic Batch Centrifuge, 92 Cloth Bay Baghouse Dust Collector, 86
Bin, live bottom storage, 88 CO. See Conveyors (CO)
BL. See Blenders (BL) Compressor, 32, 33
Blenders (BL) Condensers (C)
ROTARY, 154 BAROMETRIC, 40
Boiler unit, 27, 29, 30, 31 Conditioning Cell, 119
Boiler, waste heat, 44 Cone Bottom Vessel, 89
Bottom bin, live storage, 88 Container Dumper – Column, 184
Bow Screen – Low Consistency Stock Screen, 148 Container Dumper – Hydraulic Bin, 186
C. See Condensers (C) Container Dumper – Hydraulic Drum, 185
Centrifugal Pumps (CP) Continuous Centrifuge, 115
ANSI, 49, 50 Conveyors (CO)
ANSI PLAST, 49, 50 SCREW, 82
API 610, 49, 50 Cooling Tower, 47, 48
AXIAL FLOW, 49, 50 Cooling Towers (CTW)
CANNED, 49, 50 COOLING, 47, 48
CENTRIF, 49, 50 COOLING WP, 47, 48
FLUME PUMP, 172 CP. See Centrifugal Pumps (CP)
GEN SERVE, 49, 50 CR. See Crushers (CR)
IN LINE, 79, 80 Crusher, 120
MAG DRIVE, 143 Crushers (CR)
SAN PUMP, 175 CONE, 120
Centrifuge Precipitator, 90 GYRATORY, 120
Centrifuges (CT) CT. See Centrifuges (CT)
ATM SUSPEN, 93 CTW. See Cooling Towers (CTW)
BATCH AUTO, 92 Culinary (Sterile) Steam Filter F-6, 156
BATCH BOTM, 93 Culinary Air Filter, 155
BATCH TOP, 93 Cyclone Dust Collector, 87
BOT UNLOAD, 93 Cylindrical Tile Chest, 146
SCREEN BWL, continuous, 115 DC. See Dust Collectors (DC)
SOLID BOWL, 115 DDT. See Double Diameter Towers (DDT), PACKED/TRAYED

Icarus Piping and Instrumentation Drawings 261

DDT – Absorber Service, 103 instrument symbol, 201
DDT – Desorber Service, 107 Enclosed Jacket Reactor – Continuous, 73, 74
DDT – Distillation with Kettle RB, 128, 129 Enclosed Reactor Vessel – Continuous, 123, 124
DDT – Distillation with Therm. RB, 111, 112 Expansion joint
DDT – Extraction Service, 101 piping symbols, 200
DDT – Gas Adsorption Service, 97 Extraction service
DDT – Liquid Adsorption Service, 99 double diameter tower, 101
DDT – Stripper with Kettle RB, 132 single diameter tower, 102
DDT – Stripper with Therm. RB, 105 F. See Filters (F)
Deflaker, 149 Fabric Cartridge Filter, 94
Direct connection Fans (FN)
instrument symbol, 201 CENTRIF, 85
Direct Steam Injection (DSI) Exchanger, 188 PROPELLER, 85
Double Diameter Towers (DDT), PACKED/TRAYED ROT BLOWER, 85
adsorber, 103 VANEAXIAL, 85
desorber, 107 Fans and Blowers, 85
distillation with kettle reboiler, 128, 129 Field erected boiler unit, 27, 29, 30, 31
distillation with therm. reboiler, 111, 112 Filters (F)
extraction, 101 CARTRIDGE, 94
gas adsorption, 97 PLATE FRAME, 83
liquid adsorption, 99 SAN AIR, 155
stripper with kettle reboiler, 132 SAN PRESS, 159
stripper with therm. reboiler, 105 SAN STEAM, 156
Double Motion Agitator, 171 SAN STRAIN, 157
Double Pipe Corrugated Exchanger, 187 SPARKLER, 91
Drain TUBULAR, 95
piping symbol, 199 Flanged connection
Dust Collectors (DC) piping symbol, 199
CENTRIF PRE, 90 Flares (FLR)
CLOTH BAY, 86 DERRICK, non-smokeless, 127
CYCLONE, 87 DERRICK, smokeless, 96
MULT CYCLO, 87 GUYED, non-smokeless, 127
PULSE SHKR, 86 GUYED, smokeless, 96
WASHERS, 81 HORIZONTAL, non-smokeless, 127
Electronic signal HORIZONTAL, smokeless, 96

262 Icarus Piping and Instrumentation Drawings

 SELF SUPP, non-smokeless, 127 Heat Exchangers (HE)
SELF SUPP, smokeless, 96 AIR COOLED, 34, 35
Flotation Cell, 118 CORRUGATED, 187
Flow indicator (gauge and rotometer) graphite heat exchanger, 135
instrument symbol, 201 HOT WATER, 190
FLR. See Flares (FLR) MULTI PF, 189
Fluming Dewatering Shaker, 191 SHELL TUBE (See Drawing 26 for instrumentation), 40, 41
Fluming Pump, 172 STM HE MOD, 188
Fluming Reclaim Reel, 161 WASTE HEAT, 44
FN. See Fans (FN) High-Speed Mixer (“Norman”), 164
FU. See Furnaces (FU) Homogenizer – Piston Head, 163
Furnaces (FU) Horizontal Jacketed Pressure Vessel – Batch, 14
BOX, 42, 43 Horizontal Jacketed Pressure Vessel - Continuous, 8
HEATER, 42, 43 Horizontal Jacketed Pressure Vessel – Continuous, 10
PYROLYSIS, 42, 43 Horizontal Jacketed Pressure Vessel – Knockout, 67, 68
REFORMER, 42, 43 Horizontal Jacketed Pressure Vessel – Receiver, 37
VERTICAL, 42, 43 Horizontal Jacketed Pressure Vessel – Storage, 56, 57
Gas adsorption service Horizontal Jacketed Pressure Vessel With Boot, 198
double diameter tower, 97 Horizontal Plate Filter, 91
single diameter tower, 98 Horizontal Pressure Vessel – Batch, 12
Gas Compressors (GC) Horizontal Pressure Vessel – Continuous, 4, 6
CENTRIF (See Drawings 17 and 67 for turbines), 32 Horizontal Pressure Vessel – Knockout, 65, 66
RECIP GAS. See Horizontal Pressure Vessel – Receiver, 36
RECIP MOTOR. See Horizontal Pressure Vessel – Storage, 54, 55
Gas Turbine With Combustion Chamber, 196 Horizontal Pressure Vessel With Boot, 197
Gauge Horizontal Ribbon Blender, 168
flow indicator symbol, 201 Horizontal Tanks (HT)
GC. See Gas Compressors (GC) HORIZ DRUM, batch, 12
Gear Pumps (GP) HORIZ DRUM, continuous, 4, 6
CANNED RTR, 62 HORIZ DRUM, receiver, 36
GEAR, 62 HORIZ DRUM, storage, 53, 54, 65, 66
MECH SEAL, 62 JACKETED, batch, 15
GP. See Gear Pumps (GP) JACKETED, continuous, 8, 10
Graphite heat exchanger, 135 JACKETED, receiver, 37
HE. See Heat Exchangers (HE) JACKETED, storage, 56, 57

Icarus Piping and Instrumentation Drawings 263

Horizontal Thermosiphon Reboiler, 109 Non-Smokeless Flare, 127
Hotwater Set With Shell & Tube Heat Exchanger, 190 Off Machine Pulper, 152
HT. See Horizontal Tanks (HT) On Machine Pulper, 153
In-Line Metal Trap, 160 Open Top Jacket Reactor – Continuous, 75, 76
In-line pump, motor driven, 79, 80 Open Top Reactor Vessel – Continuous, 125, 126
Interlock Orifice plate
instrument symbol, 201 instrument symbol, 201
Jacket Horizontal Ribbon Blender, 169 Packaged boiler unit, 27, 29, 30, 31
Jacket Sanitary Horizontal Tank, 177 Particulate Scrubber, 81
Jacket Sanitary Vertical Tank – Atmospheric Mixing, 181 Plate & Frame Multizone Heat Exchanger, 189
Jacket Sanitary Vertical Tank – Atmospheric Surge, 179 Plate and Frame Filter, 83
Kettle Blender With Steam Jacket, 167 Pneumatic signal
Kettle Blender Without Steam Jacket, 166 instrument symbol, 201
Kettle Reboiler, 2, 3 Precipitator, centrifuge, 90
Liquid adsorption service Pressure safety valve
double diameter tower, 99 piping symbol, 199
single diameter tower, 100 Pressure screen, 147
Liquid Cyclone Separator, 117 Pressure vessel
Live Bottom Bin, 88 horizontal - batch, 12
M. See Mills (M) horizontal - continuous, 4, 6
Manually Operated Centrifuge, 93 horizontal - knockout, 65, 66
Mill, 116 horizontal - receiver, 36
Mills (M) horizontal - storage, 54, 55
AUTOGENOUS, 116 horizontal - with boot, 197
BALL MILL, 116 horizontal jacketed - batch, 14
ROD MILL, 116 horizontal jacketed - continuous, 8, 10
Mixers (MX) horizontal jacketed - knockout, 67, 68
STATIC, 151 horizontal jacketed - receiver, 37
Motor Driven Centrifugal Pump, 49, 50 horizontal jacketed - storage, 56, 57
Motor Driven In-Line Pump, 79, 80 horizontal jacketed - with boot, 198
Motor Driven Magnetic Drive Pipe, 142 vertical - batch, 16
Motor Driven Magnetic Drive Pump, 143 vertical - continuous, 19, 21
Motor Driven Spare Centrifugal Pump, 51 vertical - knockout, 69, 70
Motor Water to Air Cooling, 141 vertical - receiver, 38
MX. See Mixers (MX) vertical - storage, 58, 59, 60

264 Icarus Piping and Instrumentation Drawings

 vertical jacketed - batch, 18 CENT COMPR, 45, 46
vertical jacketed - continuous, 23, 25 MECHANICAL, 77
vertical jacketed - knockout, 71, 72 Regulating valve
vertical jacketed - receiver, 39 piping symbol, 199
vertical jacketed - storage, 61 Relay function
Process Heater Furnace, 42, 43 instrument symbol, 201
Pumps. See also Centrifugal Pumps (CP); Gear Pumps (GP); Reversing Anchor Agitator, 170
Vacuum Pumps (VP) Rotary Blender, 154
DIAPHRAGM, 62 Rotary Bowl/Mixer Blender, 165
DUPLEX, 62 Rotary Drum Cooker-Cooler, 195
HD STOCK, 62 Rotometer
RECIP MOTR, 62 flow indicator symbol, 201
ROTARY, 62 RU. See Refrigeration Units (RU)
SIMPLEX, 62 Rupture disk
SLURRY, 62 piping symbol, 199
TRIPLEX, 62 S. See Scales (S)
Pumps – Gear & Positive Displacement, 62 Sanitary Centrifugal Pump With Flow Control, 175
RB. See Reboilers (RB) Sanitary direct steam heat module, 188
Reactor Sanitary double pipe corrugated exchanger, 187
enclosed jacket - continuous, 73, 74 Sanitary Filter Press, 159
open top - continuous, 75, 76 Sanitary Floor Scale, 193
Reactor vessel Sanitary Horizontal Tank, 176
batch, 136, 137, 138, 139, 140 Sanitary multi-zone plate & frame exchanger, 189
enclosed - continuous, 123, 124 Sanitary Pipe Filter, 157
open top - continuous, 125, 126 Sanitary Pipe Strainer, 158
Reboilers (RB) Sanitary Rotary Lobe Pump, 174
KETTLE, 2, 3 Sanitary Screw Feeder, 194
THERMOSIPH - horizontal, 109 Sanitary Vertical Tank - Atmospheric Mixing, 181
THERMOSIPH - vertical, 110 Sanitary Vertical Tank – Atmospheric Mixing, 180
Reciprocating Compressor, 63, 64 Sanitary Vertical Tank - Atmospheric Surge, 179
Rectangular Tile Chest, 144 Sanitary Vertical Tank – Atmospheric Surge, 178
Reducer Sanitary Weight Belt Feeder, 192
piping symbol, 199 Scale, 121
Refrigeration Compressor, 77 Scales (S)
Refrigeration Units (RU) BELT, 121

Icarus Piping and Instrumentation Drawings 265

 SAN FLOOR, 193 DEFLAKER CN, 149
TRACK, 121 DEFLAKER DK, 149
TRUCK, 121 REFINER, 150
Screens (VS) Storage Vessel, 53
PRESSURE, 147 Super Sack Unloader With Pneumatic Conveyance
STOCK, 148 Discharge, 183
Screw Conveyor, 82 Super Sack Unloader With Screw Conveyor Discharge, 182
Scrubber, particulate, 81 Symbols
SE. See Separation Equipment (SE) instrumentation, 201
Separation Equipment (SE) piping, 199
WATER CYCL, 117 Tower – Absorber Service, 104
Shear Pump Homogenizer, 162 Tower – Desorber Service, 108
Shell & Tube Heat Exchanger, 40, 41 Tower – Distillation with Kettle RB, 130, 131
Single Diameter Towers (TW), PACKED/TRAYED Tower – Distillation with Therm. RB, 113, 114
absorber, 104 Tower – Extraction Service, 102
desorber, 108 Tower – Gas Adsorption Service, 98
distillation with kettle reboiler, 130, 131 Tower – Liquid Adsorption Service, 100
distillation with therm. reboiler, 113, 114 Tower – Stripper with Kettle RB, 133
extraction, 102 Tower – Stripper with Therm. RB, 106
gas adsorption, 98 Tubular Fabric Filter, 95
liquid adsorption, 100 TUR. See Turbines (TUR)
stripper with kettle reboiler, 133 Turbine (<500 HP, 375 KW), 122
stripper with therm. reboiler, 106 Turbine (>500 HP, 375 KW, 52
Smokeless Flare, 96 Turbines (TUR)
Solenoid CONDENSING, 52, 122
instrument symbol, 201 GAS, 122
Spectacle blind NON COND, 52, 122
piping symbol, 199 TW. See Single Diameter Towers (TW), PACKED/TRAYED
ST. See Stock Treatments (ST) Utility Boiler Unit, 27, 29, 30, 31
Static Mixer, 151 Vacuum Pumps (VP)
STB. See Steam Boilers (STB) MECH BOOST, 84
Steam Boilers (STB) MECHANICAL, 84
BOILER, 27, 29, 30, 31 WATER SEAL, 84
STM BOILER, 27, 29, 30, 31 Vertical Jacketed Pressure Vessel – Batch, 17
Stock Treatments (ST) Vertical Jacketed Pressure Vessel – Continuous, 23, 25

266 Icarus Piping and Instrumentation Drawings

Vertical Jacketed Pressure Vessel – Knockout, 71, 72 MULTI WALL, continuous, 19, 21
Vertical Jacketed Pressure Vessel – Receiver, 39 MULTI WALL, knockout, 70
Vertical Jacketed Pressure Vessel – Storage, 60, 61 MULTI WALL, receiver, 38
Vertical Pressure – Knockout, 69 MULTI WALL, storage, 69
Vertical Pressure Vessel – Batch, 16 SAN TANK, 178, 179, 180, 181
Vertical Pressure Vessel – Continuous, 19, 21 STORAGE, 58, 59
Vertical Pressure Vessel – Knockout, 70 WOOD TANK, 58, 59
Vertical Pressure Vessel – Receiver, 38 Vertical Thermosiphon Reboiler, 110
Vertical Pressure Vessel – Storage, 58, 59 Vessel Heater, 78
Vertical Tanks (VT) Vibrating Pressure Screen, 147
JACKETED, batch, 18 VP. See Vacuum Pumps (VP)
JACKETED, continuous, 23, 25 VS. See Screens (VS)
JACKETED, knockout, 71, 72 VT. See Vertical Tanks (VT)
JACKETED, receiver, 39 Waste Heat Boiler, 44
JACKETED, storage, 60, 61 Water Chiller, 45, 46
MULTI WALL, batch, 16 Water-Sealed Vacuum Pump, 84

Icarus Piping and Instrumentation Drawings 267

268 Icarus Piping and Instrumentation Drawings